This adds an option to detect if hole-punching is implemented by the
underlying file system. If this flag is set, and if the underlying file
system does not support hole-punching, md(4) fails BIO_DELETE requests
with EOPNOTSUPP.
Sponsored by: The FreeBSD Foundation
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D31883
When a PDU with an error (bad padding, header digest, or data digest)
is received, log the error via ICL_WARN() and then reset the
connection via the ic_error callback.
While here, add per-rxq counters for errors.
Sponsored by: Chelsio Communications
Currently hkbd counts all key states to be "Up" at the start of
interrupt callback. That results in generation of "Key Up" event for
each key that has been downed before but is not listed in current
report while is still downed.
Fix that with clearing of temporary key data storage bits only for
keys contained in processed report.
Reported by: Greg V
Obtained from: sysutils/iichid
MFC after: 2 weeks
r123442 introduced solution for clamping of PS/2 mice jitter when using
a KVM. Solution is to buffer mouse packets for 0.050ms if mouse activity
has not been seen for more than 0.5 seconds. Then flush that data to driver
if no validation errors found or drop the entire queue otherwise.
While it works well with relative devices it has issues with absolute ones
Depending on history buffering may results in delaying of the touch front
edge for 0.050ms that affects gesture processing (tap detection).
As absolute touchpads usually are built-in devices we can safely disable
bufferization and KVM jitter clamping to avoid such a delays.
MFC after: 2 weeks
- Some configurations, e.g. HP EliteBook 840 G3, come with a dummy card
in the card slot which is detected as a valid SD card. This added long
timeout at boot time. To alleviate the problem, the default timeout is
reduced to one second during the setup phase. [1]
- Some configurations crash at boot if rtsx(4) is defined in the kernel
config. At boot time, without a card inserted, the driver found that
a card is present and just after that a "spontaneous" interrupt is
generated showing that no card is present. To solve this problem,
DELAY(9) is set to one quarter of a second before checking card presence
during driver attach.
- As advised by adrian, taskqueue and DMA are set up sooner during
the driver attach. A heuristic to try to detect configuration needing
inversion was added.
PR: 255130 [1]
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30499
This disables testing the ACPI timer by default, forcing the use of
ACPI-fast rather than ACPI-safe. The broken-ACPI-timers workaround
can be re-enabled by setting the hw.acpi.timer_test_enabled=1 tunable.
This speeds up the FreeBSD boot process by 140 ms on an EC2 c5.xlarge
instance.
This change will not be MFCed.
Assuming no problems are reported, acpi_timer_test, the associated
tunable, and the ACPI-safe timecounter should be removed in FreeBSD 15.
Relnotes: The ACPI-safe timer is disabled in favour of ACPI-fast;
if timekeeping issues are observed, please test with
hw.acpi.timer_test_enabled=1 in loader.conf and report
if that fixes the problem.
When hw.acpi.timer_test_enabled is set to 0, this makes acpi_timer_test
return 1 without actually testing the ACPI timer; this results in the
ACPI-fast timecounter always being used rather than potentially using
ACPI-safe.
The ACPI timer testing was introduced in 2002 as a workaround for
errata in Pentium II and Pentium III chipsets, and is unlikely to be
needed in 2021.
While I'm here, add TSENTER/TSEXIT to make it easier to see the time
spent on the test (if it is enabled).
Reviewed by: allanjude, imp
MFC After: 1 week
In preparation for moving sockbuf locks into the containing socket,
provide alternative macros for the sockbuf I/O locks:
SOCK_IO_SEND_(UN)LOCK() and SOCK_IO_RECV_(UN)LOCK(). These operate on a
socket rather than a socket buffer. Note that these locks are used only
to prevent concurrent readers and writters from interleaving I/O.
When locking for I/O, return an error if the socket is a listening
socket. Currently the check is racy since the sockbuf sx locks are
destroyed during the transition to a listening socket, but that will no
longer be true after some follow-up changes.
Modify a few places to check for errors from
sblock()/SOCK_IO_(SEND|RECV)_LOCK() where they were not before. In
particular, add checks to sendfile() and sorflush().
Reviewed by: tuexen, gallatin
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31657
Several functions in the driver code have a weird function comment
formatting which uses two spaces instead of only one space for the main
function body.
This formatting will be mechanically fixed by sed in a future patch, but
doing so leads to some spelling warnings on that patch. Cleanup the
spelling mistakes that will be detected first. This way, it is easier to
verify the mechanical transformation done by sed in the following patch.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (fc75eee32037c1379e77e57031c1c353badd2272)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
This patch is for restarting auto negotiation on PHY.
Signed-off-by: Jakub Chylkowski <jakubx.chylkowski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (664ea2614eafbec8eda5c86764ff047475a1e5c6)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
The retry variable was being incremented before it was evaluated by the
subsequent conditional against the maximum retries to figure out which
message to print. So we'll move the increment op to the end.
Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (390445ec30b4c52a3d2887c3d2a202d9cf37ea8e)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
Remove unnecessary extra whitespace on all function comments, replacing
' * ' with ' * '.
This was done automatically via sed using the following transformation:
sed 's/^ \* / * /'
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (40023f73c76579e58a859dab87b4c30278eb2e48)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
Synced to the ixgbe shared code with DPDK shared code which has local
fixes on top of "not-released-cid-ixgbe.2020.06.09.tar.gz"
Approved by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
The question around getting rid of the assignments seems lived
long enough, if they are not needed until now, we can drop them.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Approved by: imp
Obtained from: DPDK (a6395d471e14e5a7432875dad8fb3533238c5167)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
After setting up the link on x552/X557-AT 10GBASE-T NICs, sometimes the
link does not get set up properly and as a result all the subsequent
calls to ixgbe_check_link() from ixgbe_dev_link_update_share() fail.
Introduce a delay time of 1s in ixgbe_setup_mac_link_t_X550em() before
beginning to set up the external PHY link speed to ensure that the
controller can acquire the link.
Signed-off-by: Ashijeet Acharya <ashijeet.acharya@6wind.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Approved by: imp
Obtained from: DPDK (d31b95860d8e9dd7c6e242bd08baaac00a9714f0)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
While sending request using ixgbe_hic_unlocked() the data field in
buffer struct is not used. It is set when the struct is overwritten by
FW to deliver the response. To not pass random data to FW the whole
structure should be zeroed before use.
Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (40543be5376ca415b2a7e196315d0555725b8bdf)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
With the NVM image for x550em XFI will not report
the auto-negotiation feature correctly. The auto-negotiation
should be "No" for supports and advertised items.
At the same time update speed makes it support 1G and 10G.
Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (fb03b51da940f1d56d701776fd85a0dfc1ace098)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
As the code has changed the max wait time to 1000ms, the comment should
be changed accordingly.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Approved by: imp
Obtained from: DPDK (73247f1ced303c16987bb366d38a2d8a0fc40db4)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
After setting up the link on a fiber port, the maximum wait time for
the link to come up is 500 ms in ixgbe_setup_mac_link_multispeed_fiber().
On an x550 SFP+ port, this is often not sufficiently long for the link
to come up. This can result in never being able to retrieve accurate
link status for the port using rte_eth_link_get_nowait().
Increase the maximum wait time in ixgbe_setup_mac_link_multispeed_fiber()
to 1 s.
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Approved by: imp
Obtained from: DPDK (64f1c8539c8ce99214b9eb1fb728a2c6745f3300)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
For the "Apply Update" command the firmware does not
given an response. For this command, success should
be return.
Signed-off-by: Mateusz Kowalski <mateusz.kowalski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (03b09c71c0c6c516ce05cad8e8aa75e8b9e14fba)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
On ESXi OS, when user disables auto negotiation, the following log
appears: "(unsupported) Flow control autoneg is disabled".
It is true that auto negotiation is disabled but it is
not necessarily true that it is not supported.
Signed-off-by: Jakub Chylkowski <jakubx.chylkowski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (ab6ac48d483ef7f906b90f45182f2ddf3254d876)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
In some corner cases the functions ixgbe_clear_rar_generic and
ixgbe_clear_vmdq_generic may call one another leading to infinite
recursion.
When ixgbe_clear_vmdq_generic is called with IXGBE_CLEAR_VMDQ_ALL
flag, it's going to clear MPSAR registers, and proceed to call
ixgbe_clear_rar_generic, which in turn will clear the RAR registers,
and recursively call back ixgbe_clear_vmdq_generic. Normally, the
latter would detect that MPSAR registers have already been cleared
and terminate the recursion.
However, when PCIe link is down, and before the driver has had the
opportunity to shut itself down, all register reads return 0xFFFFFFFF,
and all register writes fail silently. In such case, because
ixgbe_clear_vmdq_generic blindly assumes that clearing MPSAR registers
succeeded, it's going to always call ixgbe_clear_rar_generic, which
in turn will always call back ixgbe_clear_vmdq_generic, creating
infinite recursion.
This patch re-reads MPSAR register values after they had been cleared.
In case of PCIe link failure, the values read will be non-zero, which
will terminate the recursion. On the other hand, under normal
circumstances the value read from MPSAR registers is going to be equal
to the value previously written, so this patch is expected not to cause
any regressions.
Signed-off-by: Robert Konklewski <robertx.konklewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (2d04b9e856125197ec8e967471426d56ab7efcf0)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
ixgbe devices support up to 8 Rx and Tx queues per virtual function.
Currently, the registers of only seven queues are set to default when
resetting a VF.
Signed-off-by: Simon Ellmann <simon.ellmann@tum.de>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Approved by: imp
Obtained from: DPDK (d2565b347915def3a0f3c68bde6824acf096a0e6)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31621
None of the drivers really implement asynchronous buffer loading, so
they don't need lock there. The only question is which of them have
BUS_DMA_NOWAIT flag there already, and to which it should be added.
