Another solution would be to extend the Makefile.sys.inc idea, or a .no_obj
file, to more places but I would rather keep that limited to the top-level
build for now to not impact performance (statting a file in every make call)
or to bring unintended side-effects.
Reported by: jhb, imp
Sponsored by: Dell EMC Isilon
Since r326501 which added COMPAT_FREEBSD32 to the GENERIC config for arm64,
we need to build systrace_freebsd32, since dtraceall depends on it.
Reviewed by: ed, gnn
Differential Revision: https://reviews.freebsd.org/D13670
Don't try to use a non-existent header on FreeBSD/mips.
Reviewers: dim
Differential Revision: https://reviews.llvm.org/D38807
Requested by: jhb
MFC after: 3 days
pru_peeraddr().
This is already true when called via kern_getsockname() and
kern_getpeername(). This patch sets it also, when they arecalled
via soo_fill_kinfo(). This is necessary, since the corresponding
functions for SCTP require the vnet to be set. Without this,
if a process having an wildcard bound SCTP socket is
terminated and a core is written, the kernel panics.
Reviewed by: bz
Differential Revision: https://reviews.freebsd.org/D13652
The value written to E1000_TARC(0) wasn't intended to have every bit but
E1000_TARC0_CB_MULTIQ_3_REQ cleared; a ~ was missing.
Also change the referenced spec update section in the comment to the correct
section.
Sponsored by: Intel Corporation
Don't try to set -march as clang doesn't permit use of the O32 ABI
with newer CPU microarchitectures like 'mips3'. In addition, clang
doesn't permit the O32 ABI with the default N64 target, so use an
explicit O32 -target for clang.
Sponsored by: DARPA / AFRL
An lld-linked i386 kernel hangs on boot, after em(4) starts. This seems
similar to the issue that prompted us to disable VIMAGE on arm64 in
r326179. Disable VIMAGE on i386 for now while we investigate.
PR: 225077
Sponsored by: The FreeBSD Foundation
Opaque pointers should be void *. Note that this does not go through
the tree removing all of the now-unnecessary casts.
Reviewed by: kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D13848
Just copyin the IV into the crypto descriptor directly. This avoids
copying the IV twice for each operation.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D13847
For each we need to walk the MADT to find which we have, then add the
driver as needed. As each may have a child they will each walk the same
table to find these details.
Reviewed by: mmel
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8720
This adds a new acpi_bus interface with a map_intr method. This is similar
to the Open Firmware map_intr method and allows us to create the needed
mapping from ACPI space to INTRNG space.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8617
The NetBSD tests for vmstat are basically just a smoke test, ensuring that
executing `vmstat` and `vmstat -s` exit successfully. This is more than we
test now, so go with it.
Plan A mmap()'s the entire input file and operates on it in memory. The
map(2) call succeeded, so we shouldn't need to bother checking for the NUL
byte as long as we're within our buffer space.
This was clearly intentional to match "the behavior of the original code",
but it creates a discrepancy between Plan A and Plan B that doesn't seem
sensible and it's not inherently wrong to allow a NUL byte.
This change was motivated by the gemspec in net/rubygem-grpc failing to
patch, despite the patch being generated with diff, because a NUL byte was
used as a delimiter in the header briefly in an otherwise text file.
An alternative was considered: to fallback to plan B if plan A won't process
the entire file due to a NUL byte, but I deemed this to be the better option
since plan A isn't failing due to memory limitations and will fail later on
if it's really dealing with a file it shouldn't be.
PR: 224842 (exp-run)
Reported by: swills
Reviewed by: emaste, pfg
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13738
Highlights of the new bindings:
- ahb clock is specified as 'stmmaceth'
- The PHY to be used is now specified as phy-handle
- We must now check the parent of the node phy-handle points to in order to
discover if we're using internal PHY.
- The ephy clk/reset will be specified on the PHY node, not the emac node.
Care has been taken to ensure that we remain compatible with the older
bindings that we were previously using.
Tested on: Pine64 (A64, old bindings)
Tested on: Pine64-LTS (A64, new bindings) [manu]
Tested on: OrangePi-One (H3, internal PHY) [manu]
Tested on: NanoPi M1 Plus (H3, external PHY) [manu]
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D13777
Akin to r327783 for amd64. lld has been usable for amd64 for quite some
time, but a couple of issues remained that affected i386. These were
recently addressed upstream in lld and merged into FreeBSD (r326831,
r326879, r326897, r326957), so we can now use ld.lld on i386 as well.
Similarly to amd64 this change enables lld only as the bootstrap linker
(used to link the kernel and userland libraries and executables), while
GNU ld.bfd is still installed as /usr/bin/ld and used for ports builds.
The ports collection is essentially ready to use lld as the system
linker for amd64, but many ports still have trouble with lld on i386,
because lld defaults to -ztext, disallowing relocations against readonly
segments. Thus switching the system linker (WITH_LLD_IS_LD) will happen
later on a per-arch basis.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
ifuncs can be only called in the (early boot) kernel environment, so
postpone resolving until early stage of the kernel boot. This commit
is performed in advance to make loaders on most machines updated
before ifuncs appear in the kernels.
Reviewed by: emaste, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13838
We already clear %RFLAGS.DF on the kernel entry due to the compiler's
ABI requirements.
Suggested by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Hardware already did it for us due to the mask loaded into the
MSR_SF_MASK msr register.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13838
The symbol is just an offset in the hardware TSS structure, it is not
limited to the common_tss instance.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Avoid the lock in vtophys() by providing a static direct-mapped
spinlock- protected output buffer to use when the console driver
cannot acquire locks for some reason. This allows the idle thread
to use printf() (e.g. the SMP startup messages) without crashing
the kernel.
Created by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Submitted by: Wojciech Macek <wma@freebsd.org>
Sponsored by: FreeBSD Foundation
Make sure to set LPCR[LPES] so that external interrupts set SRR0 and SRR1
instead of HSRR0 and HSRR1. Without this, external interrupt handlers would
get the wrong MSR value when executing, causing eventual madness.
Created by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Submitted by: Wojciech Macek <wma@freebsd.org>
Sponsored by: FreeBSD Foundation
Fix AP startup, which was broken.
Created by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Submitted by: Wojciech Macek <wma@freebsd.org>
Sponsored by: FreeBSD Foundation
Add basic power control (reset, power off) and bind
ttyuX to opal console so that init will start login there.
Created by: Nathan Whitehorn <nw@freebsd.org>
Submitted by: Wojciech Macek <wma@freebsd.org>
Sponsored by: FreeBSD Foundation
Unconditional 32-bit shift is not endianness-safe.
Modify the logic to work both on LE and BE.
Submitted by: Wojciech Macek <wma@freebsd.org>
Reviewed by: np
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D13102
OPAL is a dedicated firmware acting as a hypervisor.
Add generic functions to provide all access.
Created by: Nathan Whitehorn <nw@freebsd.org>
Submitted by: Wojciech Macek <wma@freebsd.org>
The NetBSD test suite has 24 tests for awk, and we pass exactly 4 of them.
Add the necessary pieces for interested parties to easily connect the
tests and run them, but leave them disconnected for the time being.
Some of these tests outright segfault in our awk, others just exhibit the
wrong behavior.
shutdown_post_sync event. For adashutdown, this causes problems
because we need to poll for completion of the commands, but we're not
yet officially dumping yet, so the code from r326964 assumed we could
use the interrupt-driven commands rather than the polled ones. This
lead to a hang. Prevent this by also checking to see if the scheduler
is stopped to do the polling.
Reported by: markj@
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D13845
In particular, no probes were present for AEAD requests, but also for
some other error cases in other ioctl requests.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
- Call resource_int_value() once during attach, rather than within the
pci_(read|write)_config() code path; this avoids taking a blocking mutex
to read kenv variables.
- Use a spin lock to protect non-atomic config space accesses; this matches
the behavior of Darwin's AppleMacRiscPCI driver.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D13839
Additionally, move the overflow check logic out to WOULD_OVERFLOW() for
consumers to have a common means of testing for overflowing allocations.
WOULD_OVERFLOW() should be a secondary check -- on 64-bit platforms, just
because an allocation won't overflow size_t does not mean it is a sane size
to request. Callers should be imposing reasonable allocation limits far,
far, below overflow.
Discussed with: emaste, jhb, kp
Sponsored by: Dell EMC Isilon
The bug would cause incorrect behaviour when attempting to override
an already set environment variable with -x setenv, as long as the
variable is not the last one in the array.
Reported by: Samuel Lepetit <slepetit@apple.com>
MFC after: 2 weeks
Previously the AIO subsystem would save a snapshot of the currently
configured per-process limits the first time a process used AIO. The
process would continue to use the snapshotted limits ignoring any
changes to the global limits during the rest of its lifetime. This
change removes the snapshotted values and changes the AIO code to
always check the global values which can be toggled at runtime.
This means an administrator can now change the effective limits of
existing processes. This is more consistent with how other limits
configured via sysctl work in FreeBSD.
Reviewed by: asomers, kib
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D13819
This permits N32 hard-float binaries to use 64-bit floating point
registers (which is what N32 binaries expect) matching the N64 ABI.
Reviewed by: imp, jmallett
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D13830
