Fix warnings about the following when WARNS=6 (which I will commit soon):
- casting away const
- no previous 'extern' declaration for non-static variable
- others as explained by #pragmas and comments
- unused parameters
The last is the only functional change.
Reviewed by: kib
MFC after: 3 days
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D10808
When creating EQs to handle CQ completion events for the PF or for
VFs, we create enough EQE entries to handle completions for the max
number of CQs that can use that EQ.
When SRIOV is activated, the max number of CQs a VF (or the PF) can
obtain is its CQ quota (determined by the Hypervisor resource
tracker). Therefore, when creating an EQ, the number of EQE entries
that the VF should request for that EQ is the CQ quota value (and not
the total number of CQs available in the firmware).
Under SRIOV, the PF, also must use its CQ quota, because the resource
tracker also controls how many CQs the PF can obtain.
Using the firmware total CQs instead of the CQ quota when creating EQs
resulted wasting MTT entries, due to allocating more EQEs than were
needed.
MFC after: 3 days
Sponsored by: Mellanox Technologies
(TS) method is used. When packet timestamp is used, the "current_qdelay"
keeps storing the last queue delay value calculated in the dequeue
function. Therefore, when a burst of packets arrives followed by
a pause, the "current_qdelay" will store a high value caused by the
burst and stick to that value during the pause because the queue
delay measurement is done inside the dequeue function. This causes
the drop probability calculation function to calculate high drop
probability value instead of zero and prevents the burst allowance
mechanism from working properly. Fix this problem by resetting
"current_qdelay" inside the drop probability calculation function
when the queue length is zero and TS option is used.
Submitted by: Rasool Al-Saadi <ralsaadi@swin.edu.au>
MFC after: 1 week
Marvell Armada 380 is a uni-processor variant of the 38x SoC
family. A function platform_mp_setmaxid() was setting a hardcoded
value, which caused boot fail on A380. Fix this by relying on
the CPU count obtained from device tree nodes.
Submitted by: Marcin Wojtas <mw@semihalf.com
Obtained from: Semihalf
Sponsored by: Netgate
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10783
Before the fix for single interrupt, both percpu and non-percpu routes
were enabled/disable at the same time.
Submitted by: Marcin Wojtas <mw@semihalf.com
Obtained from: Semihalf
Sponsored by: Stormshield, Netgate
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10716
e6000sw family automatically reflects PHY status in each port's registers.
Therefore it is not necessary to do a full PHY polling squence, which
results in much quicker operation and much less significant usage of
the SMI bus.
Care must be taken that the resulting ifmedia_active is identical to
what the PHY will compute, or gratuitous link status changes will
occur whenever the PHYs update function is called.
This patch implements above improvement. On the occasion set a pointer to
the proc structure to be part of software context instead of being
a global variable.
Submitted by: Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10714
Make sure the RX ring lock is only released when the state of the ring is
consistent, or else concurrent calls to xn_rxeof might get an inconsistent ring
state and thus some packets might be processed twice.
Note that this is not very common, and could only happen when an interrupt is
delivered while in xn_ifinit.
Reported by: cperciva
Tested by: cperciva
MFC after: 1 week
Sponsored by: Citrix Systems R&D
For all Marvell devices, MBUS windows configuration is done
in a common place. Only CESA was an exception, so move its
related code from driver to mv_common.c. This way it uses
same proper DRAM information, same as all other interfaces
instead of parsing DT /memory node directly.
Submitted by: Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10723
Hitherto implementation of PHY polling resulted in a risk of an
endless loop and very high occupation of the SMI bus. Improve the
operation by limiting the polling tries and adding sleepable
pause.
Submitted by: Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10713
Call disk_gone when the backend switches to the "Closing" state and blkfront
still has pending users. This allows the disk to be detached, and will call
into xbd_closing by itself when the geom layout cleanup has finished.
Reported by: bapt
Tested by: manu
Reviewed by: bapt
Sponsored by: Citrix Systems R&D
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D10772
pthread_cond_timedwait() receives absolute time, not relative. Passing
wrong time there caused two threads of zdb to spin in a tight loop.
MFC after: 1 week
always perform recursion on the left partition, then use a tail call to
handle the right partition. In the worst case this could require O(N)
levels of recursions.
Reduce the possible recursion level to log2(N) by always recursing on the
smaller partition instead.
Obtained from: PostgreSQL 9d6077abf9d6efd992a59f05ef5aba981ea32096
defined. On machines without arithmetic shift instructions, zero bits
may be shifted in from the left, giving a large positive result instead
of the desired divide-by power-of-2. Fix this by operating on the
absolute value and compensating for the possible negation later.
Reverse the order of the underflow/overflow tests and the exponential
decay calculation to avoid the possibility of an erroneous overflow
detection if p is a sufficiently small non-negative value. Also
check for negative values of prob before doing the exponential decay
to avoid another instance of of right shifting a negative value.
Tested by: Rasool Al-Saadi <ralsaadi@swin.edu.au>
MFC after: 1 week
Allocating and deallocating repeatedly the 1024-byte buffer for stdout from
builtins costs CPU time for little or no benefit.
A simple loop containing builtins that write to a file descriptor, such as
i=0; while [ "$i" -lt 1000000 ]; do printf .; i=$((i+1)); done >/dev/null
is over 10% faster in a simple benchmark on an amd64 virtual machine.
kern_yield(0) effectively causes the calling thread to be rescheduled
immediately since it resets the thread's priority to the highest possible
value. This can cause livelocks when the pattern
"while (!trylock()) kern_yield(0);" is used since the thread holding the
lock may linger on the runqueue for the CPU on which the looping thread is
running.
MFC after: 1 week
This was done by Romain Tartière for PR123553. I initially thought that it would break code like this:
#define b00101010 -1
if (0 b00101010)
...
by joining 0 and b00101010 together. However, the real problem with that patch was that once it saw a 0, it assumed that the number was base 2, 8 or 16, ignoring base 10 floating point numbers. I fixed that.
I didn't copy the diagnostic part of the original patch as it seems out of scope of implementing binary integer literals formatting.
PR: 123553
Submitted by: romain (original version)
Approved by: pfg (mentor)
Add the ffs option to enable soft-updates.
The option is only processed is ufs2 has been selected.
Reviewed by: emaste, bapt (earlier version), allanjude (earlier version)
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D10773
The first test triggers the out of bounds read of the 'left' array. It
only fails when realpath.c is compiled with '-fsanitize=address'.
The other test checks for ENOENT when running into an empty
symlink. This matches NetBSD's realpath(3) semantics. Previously,
empty symlinks were treated like ".".
Submitted by: Jan Kokemц╪ller <jan.kokemueller@gmail.com>
PR: 219154
MFC after: 2 weeks
The default crontab prior to this commit assumes atrun(8) is always
present, which isn't true if MK_AT == no. Move atrun(8) execution
from /etc/crontab to /etc/cron.d/at, and base /etc/cron.d/at's installation
on MK_AT. cron(8) will detect /etc/cron.d/at's presence when the configuration
is loaded and run atrun every 5 minutes like it would prior to this commit.
SHELL and PATH are duplicated between /etc/crontab and /etc/cron.d/at
because atrun(8) executes programs, which may rely on environment
set in the current default /etc/crontab.
Noted by: bdrewery (in an internal review)
MFC after: 2 months
Relnotes: yes (may need to add environmental modifications to
/etc/cron.d/at)
Sponsored by: Dell EMC Isilon
Install /etc/cron.d/at if MK_AT != no, always using it, which tries
to run a non-existent program via cron(8) every 5 minutes with the
default /etc/crontab, prior to this commit.
SHELL and PATH are duplicated between /etc/crontab and /etc/cron.d/at
because atrun(8) executes programs, which may rely on environment
currently set via /etc/crontab.
Noted by: bdrewery (in an internal review)
MFC after: 2 months
Relnotes: yes (may need to add environmental modifications to
/etc/cron.d/at)
Sponsored by: Dell EMC Isilon
This will help Jenkins dedupe 9 warnings between the static build and
the module build of ipsec(4).
Missed in SRCTOP conversion in r314651.
MFC with: r314651
Sponsored by: Dell EMC Isilon
Items tested via this commit are:
- Some basic POSIX constants.
- Some valid programming environments with -v.
- Some invalid programming environments via -v.
NOTE: this test makes assumptions about ILP32/LP32 vs LP64 that are
currently not true on all architectures to avoid hardcoding some
architectures in the tests. I'm working on improving getconf(1) to be
more sane about handling ILP32/LP32 vs LP64. Future commits are coming
soon to address this.
MFC after: 2 weeks
Tested with: amd64, i386
Sponsored by: Dell EMC Isilon
When I originally documented the LD_LIBRARY_PATH_FDS environment variable,
I used `.Ev` rather than `.It Ev` to introduce it; this led to the
documentation being embedded in the previous paragraph (LD_LIBRARY_PATH).
When executing rtld directly, allow a file descriptor to be explicitly
specified rather than opened from the given path. This, together with the
LD_LIBRARY_PATH_FDS environment variable, allows dynamically-linked
applications to be executed from within capability mode.
Also add some rudimentary argument parsing (without pulling in getopt or
the like) to accept this file descriptor, a help (-h) option and a basic
usage string.
Reviewed by: kib
Sponsored by: NSERC, RDC
Differential Revision: https://reviews.freebsd.org/D10751
The ccr(4) driver supports use of the crypto accelerator engine on
Chelsio T6 NICs in "lookaside" mode via the opencrypto framework.
Currently, the driver supports AES-CBC, AES-CTR, AES-GCM, and AES-XTS
cipher algorithms as well as the SHA1-HMAC, SHA2-256-HMAC, SHA2-384-HMAC,
and SHA2-512-HMAC authentication algorithms. The driver also supports
chaining one of AES-CBC, AES-CTR, or AES-XTS with an authentication
algorithm for encrypt-then-authenticate operations.
Note that this driver is still under active development and testing and
may not yet be ready for production use. It does pass the tests in
tests/sys/opencrypto with the exception that the AES-GCM implementation
in the driver does not yet support requests with a zero byte payload.
To use this driver currently, the "uwire" configuration must be used
along with explicitly enabling support for lookaside crypto capabilities
in the cxgbe(4) driver. These can be done by setting the following
tunables before loading the cxgbe(4) driver:
hw.cxgbe.config_file=uwire
hw.cxgbe.cryptocaps_allowed=-1
MFC after: 1 month
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D10763
Please note that only a subset of CPU0 registers are exported. CPU1
registers are not touched.
Obtained from: ARMADA38X Functional Specifications
Sponsored by: Rubicon Communications, LLC (Netgate)
This includes NVMe device support and adds support for the following adapters:
SAS 3408
SAS 3416
SAS 3508
SAS 3516
SAS 3616
SAS 3708
SAS 3716
Reviewed by: ken, scottl, asomers, mav
Approved by: ken, scottl, mav
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D10095
consistent and easier to read.
While here, remove two unused static functions and fix a unused function
warning when building !INTRNG.
No functional changes.
Sponsored by: Rubicon Communications, LLC (Netgate)
