IEEE 802.3 Clause 45 added backwards-compatible support for 2^16 PHY registers
through the addition of an additional device address frame.
Clause 45 addressing is used in 10Gbe PHYs, 802.3az EEE registers, etc. It may
make sense to provide a similar extension to the miibus interface, but I've
refrained from unilaterally doing so here.
Submitted by: Landon Fuller <landon@landonf.org>
Differential Revision: https://reviews.freebsd.org/D4607
different from the interpreter path requested by the binary.
Before this change, it is impossible to activate non-default
interpreter for 32bit image on amd64, when /libexec/ld-elf32.so.1 file
exists.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
cards supported by cxgbe(4).
On the host side this driver interfaces with the storage stack via the
ICL (iSCSI Common Layer) in the kernel. On the wire the traffic is
standard iSCSI (SCSI over TCP as per RFC 3720/7143 etc.) that
interoperates with all other standards compliant implementations. The
driver is layered on top of the TOE driver (t4_tom) and promotes
connections being handled by t4_tom to iSCSI ULP (Upper Layer Protocol)
mode. Hardware assistance in this mode includes:
- Full TCP processing.
- iSCSI PDU identification and recovery within the TCP stream.
- Header and/or data digest insertion (tx) and verification (rx).
- Zero copy (both tx and rx).
Man page will follow in a separate commit in a couple of weeks.
Relnotes: Yes
Sponsored by: Chelsio Communications
Before this change virtual ports control IOCBs were executed synchronously
via Execute IOCB mailbox command. It required exclusive use of scratch
space of driver and mailbox registers of the hardware. Because of that
shared resources use this code could not really sleep, having to spin for
completion, blocking any other operation.
This change introduces new asynchronous design, sending the IOCBs directly
on request queue and gracefully waiting for their return on response queue.
Returned IOCBs are identified with unified handle space from r292725.
The mdio driver interface is generally useful for devices that require
MDIO without the full MII bus interface. This lifts the driver/interface
out of etherswitch(4), and adds a mdio(4) man page.
Submitted by: Landon Fuller <landon@landonf.org>
Differential Revision: https://reviews.freebsd.org/D4606
bugfix-only release, with no new features.
Please note that from 3.5.0 onwards, clang and llvm require C++11
support to build; see UPDATING for more information.
send_queue and the socket is closed. This results in strange
race conditions for the application.
While there, remove a stray character.
MFC after: 3 days
I am not sure why this was split long ago, but I see no reason for it.
At this point this unification just slightly reduces memory usage, but
as next step I plan to reuse shared handle space for other IOCB types.
POSIX requires for the c99 compiler.
(In fact, our c99(1) already ignores -lxnet; but our make(1) doesn't set
${CC} correctly, and our cc(1) treats xnet like any other library.)
Reviewed by: kib
These are all works in progress. Notably - no wifi support just yet!
I've booted the MT7620 on a TP-Link Archer C2 via tftpboot.
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
TFO is disabled by default in the kernel build. See the top comment
in sys/netinet/tcp_fastopen.c for implementation particulars.
Reviewed by: gnn, jch, stas
MFC after: 3 days
Sponsored by: Verisign, Inc.
Differential Revision: https://reviews.freebsd.org/D4350
This is a work in progress; bringing the interface down stops further
use. It only happens on RT5350/MT7620.
This is based on work by Alexander A. Mityaev <sansan@adm.ua>.
Submitted by: Stanislav Galabov <galabov@gmail.com>
* Add in chipset awareness to the obio bus layout (ie, which devices are
where);
* Add in some USB OTG changes to be aware of the newer stuff;
* Add in a configurable primary console - some chips use the normal UART,
some use UARTLITE.
Tested (by Stanislav);
* RT3050 (NFS)
* RT5350 (NFS, MFS)
* MT7620 (USB)
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
ports.
The sys/mips/rt305x/ code currently has these hard-coded with a comment
to make them configurable; this is the first step towards that.
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
available. As with MSI interrupts these can be disabled by setting
hw.usb.xhci.msix to 0 in the loader.
MSI-X interrupts are needed on some hardware, for example the Cavium
ThunderX only supports them, and with this we don't fall back to polling.
PR: 204378
Reviewed by: hselasky, jhb
MFC after: 1 week (after r292669)
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D4698
