Commit 33721eb991d8 enabled use of "nolockd" for
NFSv4 mounts. This was done primarily to allow its
use with the "intr" mount option.
This patch updates the man page for this.
This is a content change.
Reviewed by: gbe (manpages), karels
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D36462
Occasionally the QEMU package fails to build and isn't available on
-CURRENT using the Latest package set. Move the package installation
to the test script, so that if the package isn't available we at least
still perform a build test.
Sponsored by: The FreeBSD Foundation
This is based off the Linux file sound/hda/intel-dsp-config.c.
Reviewed by: imp (src)
Tested on: HP Spectre x360 16-f0023dx
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D36476
It is now unused and not having it allows further clean ups.
Reviewed by: cy, glebius, kp
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D36452
With addition of clkgen devices to the Armada38x we no longer
need to rely on get_tclk() to get the device frequency.
Leave it as a fallback, just in case.
Reviewed by: manu
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D36465
With the addition of clkgen devices to the Armada38x, there is
no longer any need to use the get_tclk() hack.
Reviewed by: manu
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D36456
This patch introduces basic gate control driver for Armada38x SoC.
Each gate controls coreclk output to a given peripheral.
Reviewed by: manu
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D36455
This patch introduces clkgen driver for Armada38x SoCs.
Clock topology consists of single coreclk which supplies
clock signal to CPU cores and peripherials.
Reviewed by: manu
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D36453
It is stored in the clock-frequency property.
In case of failure, fallback to the harcoded value stored in the
compat data.
Also, while here improve style.
Tested on LS1046ARDB and x86 PC.
Reviewed by: mw
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D36326
Add VM_EXITCODE_IPI to permit returning unhandled IPIs to userland.
INIT and Startup IPIs are now returned to userland. Due to backward
compatibility reasons, a new capability is added for enabling
VM_EXITCODE_IPI.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35623
Sponsored by: Beckhoff Automation GmbH & Co. KG
vcpus could be restarted by the guest by sending an INIT SIPI SIPI
sequence to a vcpu. That's not supported by bhyve yet but it will be
supported in a future commit. So, create the vcpu threads only once on
startup to make restarting a vcpu easier.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35621
Sponsored by: Beckhoff Automation GmbH & Co. KG
Although originally socket was intended to use with ipfw(4) only, now
it also can be used with pf(4). On a kernel without packet filters,
it still can be used to inject traffic.
Python's socketmodule isn't able to construct sockaddr when it doesn't
recognize the address family. Until this is solved in python let the
tests use the compatibility way to create divert(4) socket.
The SIOCSTAT1 ioctl is only used in ip_auth and is unused in ip_state.
The ip_state version was likely added to support a new statistic yet
to be developed in ipfstat(8) or for some sample userspace application
(similar in fashion to the sample provided for authentication rules).
There is no need to report individual state hash table bucket lengths
to any future userspace application.
If needed for any future debugging purposes a DTrace probe would be a
better vehicle.
This unused ioctl in ip_stat results in a panic.
PR: 266124
Reported by: Robert Morris <rtm@lcs.mit.edu>
MFC after: 3 days
It was possible to cause kernel panic by passing too large args_len
or non-NULL result_nvl.
Though since the /dev/cam/ctl device is accessible only by root and
used only by limited number of tools it was not a big problem.
PR: 266115
PR: 266136
Reported by: Robert Morris <rtm@lcs.mit.edu>
MFC after: 1 week
When something was found wrong with an inode the error message
was always "UNKNOWN FILE TYPE". This error is now used only when
the file type field is wrong. Other errors have their own messages:
"BAD FILE SIZE", "NEGATIVE FILE SIZE", "BAD SPECIAL-FILE RDEV",
"INVALID DIRECT BLOCK", and "INVALID INDIRECT BLOCK".
More complete information about the inode is also provided.
Sponsored by: The FreeBSD Foundation
The main changes this brings in are:
- Improves the performance of memcmp
- Adds SVE implementation of memcpy
- Uses the MTE version of some str* functions as they are faster
Sponsored by: The FreeBSD Foundation
Reviewed by: imp
Discussed with: gbe (man pages)
English wording help by: rpokala
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D36435
The newly created state failed to be inserted anywhere. This follows
other places.
Reviewed by: kp
Sponsored by: Rubicon Communications, LLC ("Netgate")
We have repeatedly gotten reports of unclassified SIOCIFCREATE2 errors
(usually "Device not configured"). This can happen if there is
configuration for interfaces in rc.conf which do not (yet) exist and
we try to configure. I can, e.g., provoke this by configuring wlan
interfaces with their physical interface not installed.
In order to cut support (guesswork) down print the name of the
interface to be configured with the error message.
Hopefully this will help us in the future to improve other configuration
or driver problems.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
The send tag pointer may be NULL when the ktls_reset_receive_tag()
function is invoked. Add check for this.
Reviewed by: gallatin @
Sponsored by: NVIDIA Networking
Similar to the preceding fix for layer three rules, ensure that we
recursively list wildcard anchors for ethernet rules.
MFC after: 3 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D36417
Fix a couple of problems with printing of anchors, in particular recursive
printing, both of inline anchors and when requested explicitly with a '*'
in the anchor.
- Correct recursive printing of wildcard anchors (recurse into child anchors
rather than rules, which don't exist)
- Print multi-part anchor paths correctly (pr6065)
- Fix comments and prevent users from specifying multi-component names for
inline anchors.
tested by phessler
ok henning
Also fix the relevant pfctl test case to reflect the new (and now
correct) behaviour).
MFC after: 3 weeks
Obtained from: OpenBSD (mcbride, f9a568a27c740528301ca3419316c85a9fc7f1de)
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D36416
Ensure that we pass the (base) anchorname to the kernel, not the '/*'
suffix.
MFC after: 3 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D36415
Ensure that a wildcard anchor actually includes any nested anchors (i.e.
foo/* will call into foo/bar).
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D36414
most programs in ports are looking for .pc files in order to get the
necessary information on how to compile and link against openssl.
The ports now also has a way to hide or force a path for pkgconf.
Providing .pc files along with openssl in base will allow (once all
the supported version of FreeBSD has it) so improve the framework to
deal with openssl in base vs openssl in ports (and libressl)
This will also greatly reduce the number of patches necessary to
workaround the build systems which only knows how to detect where
openssl is installed via pkgconf.
PR: 266051
MFC After: 3 weeks
Reviewed by: jkim, delphij
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D36360
When calling shutdown, shutdown sends a signal to init and exits. This
causes a race condition for the waitpid function. If the signal wins the
race, wpid will be set to -1 and init calls death_single. If shutdown
wins the race, wpid will be set to the pid of the shutdown process and
the requested_transition will be ignored.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D36356
MFC after: 1 week
Sponsored by: Beckhoff Automation GmbH & Co. KG
LacSymCb_CallbacksRegister declared with a (void) argument list but was
defined with (). With Clang 15 this produced a warning.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
