This change adds tests/ directories in the source tree to create various
subdirectories in /usr/tests/ and to install placeholder Kyuafiles for
them.
the relevant hierarchies are: cddl, etc, games, gnu and secure.
The reason for this is to simplify the addition of new test programs for
utilities or libraries under any of these directories. Doing so on a
case by case basis is unnecessary and is quite an obscure process.
and zdb(8) by growing the buffer on demand with a cap of 1GB (specified in
spa_history_create_obj()).
PR: bin/186574
Submitted by: Andrew Childs <lorne cons org nz> (with changes)
MFC after: 2 weeks
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
New ZFS property volmode and sysctl vfs.zfs.vol.mode allow switching ZVOL
between three modes:
geom -- existing fully functional behavior (default);
dev -- exposing volumes only as raw disk device file in devfs;
none -- not exposing volumes outside ZFS.
The "dev" mode is less functional (can't be partitioned, mounted, etc),
but it is faster, and in some scenarios with untrusted consumers safer.
It can be useful for NAS, VM block storages, etc.
The "none" mode may be convenient for backup servers, etc. that don't
need direct data access.
Due to the way ZVOL is integrated with main ZFS code, those property
and sysctl are checked only during pool import and volume creation.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
4248 dtrace(1M) should never create DOF with empty probes section
4249 Only probes from the first DTrace object file will be included
Illumos Revision: 4a20ab41aadcb81c53e72fc65886e964e9add59
Reference:
https://www.illumos.org/issues/4248https://www.illumos.org/issues/4249
Obtained from: Illumos
MFC after: 1 month
Fix a memory leak in uu_avl_pool_create: pthread_mutex_init without
a corresponding pthread_mutex_destroy. It shows up, among other
places, when doing "zfs list".
MFC after: 3 weeks
Sponsored by: Spectra Logic Corporation
concatenates the DOF tables into one section. Previously, the USDT init
code in drti.o would only look at the first table in the DOF section; with
this change, it iterates over all the tables, passing each DOF table to
the kernel.
PR: 186821
Submitted by: Fedor Indutny <fedor@indutny.com>
MFC after: 1 month
illumos/illumos-gate@6fb4854bed
This fixes the tst.resize1.d and tst.resize2.d DTrace tests, which have
been failing since r261122 since they were causing dtrace(1) to attempt to
allocate and use large amounts of memory, and get killed by the OOM killer
as a result.
MFC after: 1 month
"Manpages should start a new sentence on a new line. This makes it easier
for translators to track changes." -jhb
Approved by: jhb
MFC after: 3 days
Sponsored by: SupraNet Communications, Inc
hot spares. This should be MFC'd to all STABLE branches.
Upon the availability of zfsd, the zpool manpage on relevant branches should
be updated to remove this caveat and document hot spare's reliance on zfsd.
Approved by: avg
MFC after: 1 week
Sponsored by: SupraNet Communications
The limitation was introduced in r178556 without any note or comment.
It seems pretty artificial and now it leads to problems like the following:
$ dtrace -x bufsize=17m -n ...
dtrace: processing aborted: Memory allocation failure
OpenSolaris and illumos never had this limitation.
Sponsored by: HybridCluster
emitting the DIE for the type of that member. ctfconvert can not
handle this properly and will calculate a wrong member bit offset.
Same struct/union type from different .o file will be treated as
different types when their member bit offsets are different, and
gets added/merged multiple times. This will in turn cause many other
structs/pointers/typedefs that refer to the duplicated struct/union
gets added/merged multiple times and eventually causes numerous
duplicated CTF types in the kernel.debug file.
The simple workaround here is to make use of DW_AT_byte_size attribute
of the member DIE to calculate the bits occupied by the member's type,
without actually resolving the type.
attributes generated by Clang 3.4.
* Document how different compilers generate DW_AT_data_member_location
attributes differently.
* Document the quirks about DW_FORM_data[48].
"__anon__". This hack is used to workaround a issue that compilers
like GCC could generate DW_TAG_base_type DIE without a name.
Note that we didn't need this before because the old libdwarf
internally set all the unnamed DIE's name to "__anon__".
4370 avoid transmitting holes during zfs send
4371 DMU code clean up
illumos/illumos-gate@43466aae47
NOTE: Make sure the boot code is updated if a zpool upgrade is
done on boot zpool.
MFC after: 2 weeks
3306 zdb should be able to issue reads in parallel
3321 'zpool reopen' command should be documented in the man page
and help message
illumos/illumos-gate@31d7e8fa33
FreeBSD porting notes: the kernel part of this changeset depends
on Solaris buf(9S) interfaces and are not really applicable for
our use. vdev_disk.c is patched as-is to reduce diverge from
upstream, but vdev_file.c is left intact.
MFC after: 2 weeks
SHT_RELA sections properly instead of assuming that the relocation section
is of type SHT_REL.
Submitted by: Prashanth Kumar <pra_udupi@yahoo.co.in> (original version)
MFC after: 1 month
4171 clean up spa_feature_*() interfaces
4172 implement extensible_dataset feature for use by other zpool
features
illumos/illumos-gate@2acef22db7
MFC after: 2 weeks
4168 ztest assertion failure in dbuf_undirty
4169 verbatim import causes zdb to segfa
4170 zhack leaves pool in ACTIVE state
illumos/illumos-gate@7fdd916c47
MFC after: 2 weeks
(64MB). Even if we would find one somehow, ZFS kernel code rejects such
devices. It is funny to look on attempts to read 4 256K vdev labels from
1.44MB floppy, though it is not very practical and quite slow.
expect the installed ksh binary to be named "ksh", which is not the case
when it's installed on FreeBSD via the shells/ksh93 port. Allow for it to be
"ksh93" as well so that the tests can actually pass.
4101 metaslab_debug should allow for fine-grained control
4102 space_maps should store more information about themselves
4103 space map object blocksize should be increased
4104 ::spa_space no longer works
4105 removing a mirrored log device results in a leaked object
4106 asynchronously load metaslab
illumos/illumos-gate@0713e232b7
Note that some tunables have been removed and some new tunables have
been added. Of particular note, FreeBSD-only knob
vfs.zfs.space_map_last_hope is removed as it was a nop for some time now
(after one of the previous merges from upstream).
MFC after: 11 days
Sponsored by: HybridCluster [merge]
illumos/illumos-gate@69962b5647
Please note the following changes:
- zio_ioctl has lost its priority parameter and now TRIM is executed
with 'now' priority
- some knobs are gone and some new knobs are added; not all of them are
exposed as tunables / sysctls yet
MFC after: 10 days
Sponsored by: HybridCluster [merge]
943 zio_interrupt ends up calling taskq_dispatch with TQ_SLEEP
illumos/illumos-gate@5aeb94743e
Essentially FreeBSD taskqueues already operate in a mode that
was added to Illumos with taskq_dispatch_ent change.
We even exposed the superior FreeBSD interface as taskq_dispatch_safe.
Now we just rename taskq_dispatch_safe to taskq_dispatch_ent and
struct struct ostask to taskq_ent_t, so that code differences will be
minimal.
After this change sys/cddl/compat/opensolaris/sys/taskq.h header is no
longer needed.
Note that this commit is not an MFV because the upstream change was not
individually committed to the vendor area.
MFC after: 8 days
On some architectures (powerpc), char is unsigned by default, which means
comparisons against -1 always fail, so the programs get stuck in an
infinite loop.
MFC after: 1 week
to ILP32. Otherwise dtrace -G will attempt to use it on amd64 if it can't
determine which data model to use, which happens when -64 is omitted and
no object files are provided, e.g. with
# dtrace -G -n BEGIN
This would result in a linker error, but now works properly.
Also remove an unnecessary #ifdef.
MFC after: 2 weeks
The compiler will see the non-string literal arguments to the fprintf calls and
omit warnings for them. Quiese these warnings in contrib code:
cddl/contrib/opensolaris/lib/libnvpair/libnvpair.c:743:12: warning: format
string is not a string literal (potentially insecure) [-Wformat-security]
ARENDER(pctl, nvlist_array, nvl, name, val, nelem);
installed. Additionally, remove Solaris-specific sections and references,
and replace example outputs with output from lockstat on FreeBSD, since
lockstat's output contains stack traces.
This change also removes some examples that don't seem to work properly on
FreeBSD. The examples should be re-added when lockstat is fixed.
Reported by: avg
MFC after: 1 week
available under Oracle Solaris 11.
This includes an update to the ZFS(8) man page to reflect all the
available alias (snap, umount, and recv).
Initial changes obtained from ZFS On Linux + fixes for man page and cmd
help:
10b75496bbcf81b00a73
Obtained from: https://github.com/zfsonlinux/zfs
MFC after: 2 weeks
Sponsored by: Multiplay
null-separated strings to a single string. This can be used to print the
full arguments of a process using execsnoop (from the DTrace toolkit) or
with the following one-liner:
dtrace -n 'syscall::execve:return {trace(curpsinfo->pr_psargs);}'
Note that this relies on the process arguments being cached via the struct
proc, which means that it will not work for argvs longer than
kern.ps_arg_cache_limit. However, the following rather non-portable
script can be used to extract any argv at exec time:
fbt::kern_execve:entry
{
printf("%s", memstr(args[1]->begin_argv, ' ',
args[1]->begin_envv - args[1]->begin_argv));
}
The debug.dtrace.memstr_max sysctl limits the maximum argument size to
memstr(). Thanks to Brendan Gregg for helpful comments on freebsd-dtrace.
Tested by: Fabian Keil (earlier version)
MFC after: 2 weeks
don't make sense on FreeBSD. In particular,
- remove the ATTRIBUTES section,
- remove references to the Solaris Dynamic Tracing Guide, except in the
SEE ALSO section,
- update the description of the -A option for FreeBSD's implementation,
- remove references to Solaris-specific programs and configuration files,
and replace them with FreeBSD equivalents where possible.
The content has not changed aside from this.
Approved by: re (joel)
MFC after: 1 week
input path. These probes get some of the fields in host order, whereas the
output probes get them in network order, so a single translator isn't
enough. This workaround ensures that the problem is essentially invisble
to users: none of the probe arguments or their fields have changed.
Approved by: re (hrs)
Add support of Illumos dumps on zvol over RAID-Z.
Note that this only adds the features. FreeBSD would
still need more work to support dumping on zvols.
Illumos ZFS issues:
2932 support crash dumps to raidz, etc. pools
MFC after: 1 month
Approved by: re (ZFS blanket)
Illumos ZFS issues:
3582 zfs_delay() should support a variable resolution
3584 DTrace sdt probes for ZFS txg states
Provide a compatibility shim for Solaris's cv_timedwait_hires
to help aid future porting.
Approved by: re (ZFS blanket)
These programs and everything using libzpool rely on the embedded asserts to
verify the correctness of operations. Given that, the core dumps would be
useless without debug symbols.
2942 CTF tools need to handle files which legitimately lack data
2978 ctfconvert still needs to ignore legitimately dataless files on SPARC
Illumos Revisions: 13745:6b3106b4250f
13754:7231b684c18b
Reference:
https://www.illumos.org/issues/2942https://www.illumos.org/issues/2978
MFC after: 3 weeks
dynamic translation so that their arguments match the definitions for
these providers in Solaris and illumos. Thus, existing scripts for these
providers should work unmodified on FreeBSD.
Tested by: gnn, hiren
MFC after: 1 month
Don't treat the parameter as a number (pool GUID) when there is
error converting it from string, instead, treat it as the pool
name.
Illumos ZFS issues:
1765 assert triggered in libzfs_import.c trying to import pool
name beginning with a number
To quote original Illumos ticket:
libctf thinks that any ELF file containing more than 65536 sections is
corrupt, because it doesn't understand the SHN_XINDEX magic.
Illumos DTrace issues:
4005 libctf can't deal with extended sections
Illumos DTrace issues:
3089 want ::typedef
3094 libctf should support removing a dynamic type
3095 libctf does not validate arrays correctly
3096 libctf does not validate function types correctly
minimum allocation size for devices. Use this information to
automatically increase ZFS's minimum allocation size for new top-level
vdevs to a value that more closely matches the optimum device
allocation size.
Use GEOM's stripesize attribute, if set, as the physical sector
size of the GEOM.
Calculate the minimum blocksize of each metaslab class. Use the
calculated value instead of SPA_MINBLOCKSIZE (512b) when determining
the likelyhood of compression yeilding a reduction in physical space
usage.
Report devices with sub-optimal block size configuration in "zpool
status". Also properly fail attempts to attach devices with a
logical block size greater than 8kB, since this will cause corruption
to ZFS's label area.
Sponsored by: Spectra Logic Corporaion
MFC after: 2 weeks
Background
==========
Many modern devices use physical allocation units that are much
larger than the minimum logical allocation size accessible by
external commands. Two prevalent examples of this are 512e disk
drives (512b logical sector, 4K physical sector) and flash devices
(512b logical sector, 4K or larger allocation block size, and 128k
or larger erase block size). Operations that modify less than the
physical sector size result in a costly read-modify-write or garbage
collection sequence on these devices.
Simply exporting the true physical sector of the device to ZFS would
yield optimal performance, but has two serious drawbacks:
1) Existing pools created with devices that have different logical
and physical block sizes, but were configured to use the logical
block size (e.g. because the OS version used for pool construction
reported the logical block size instead of the physical block
size) will suddenly find that the vdev allocation size has
increased. This can be easily tolerated for active members of
the array, but ZFS would prevent replacement of a vdev with
another identical device because it now appears that the smaller
allocation size required by the pool is not supported by the new
device.
2) The device's physical block size may be too large to be supported
by ZFS. The optimal allocation size for the vdev may be quite
large. For example, a RAID controller may export a vdev that
requires read-modify-write cycles unless accessed using 64k
aligned/sized requests. ZFS currently has an 8k minimum block
size limit.
Reporting both the logical and physical allocation sizes for vdevs
solves these problems. A device may be used so long as the logical
block size is compatible with the configuration. By comparing the
logical and physical block sizes, new configurations can be optimized
and administrators can be notified of any existing pools that are
sub-optimal.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/spa.h:
Add the SPA_ASHIFT constant. ZFS currently has a hard upper
limit of 13 (8k) for ashift and this constant is used to
both document and enforce this limit.
sys/cddl/contrib/opensolaris/uts/common/sys/fs/zfs.h:
Add the VDEV_AUX_ASHIFT_TOO_BIG error code.
Add fields for exporting the configured, logical, and
physical ashift to the vdev_stat_t structure.
Add VDEV_STAT_VALID() macro which can be used to verify the
presence of required vdev_stat_t fields in nvlist data.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c:
Provide a SYSCTL_PROC handler for "max_auto_ashift". Since
the limit is only referenced long after boot when a create
operation occurs, there's no compelling need for it to be
a boot time configurable tunable. This also allows the
validation code for the max_auto_ashift value to be contained
within the sysctl handler.
Populate the new fields in the vdev_stat_t structure.
Fail vdev opens if the vdev reports an ashift larger than
SPA_MAXASHIFT.
Propogate vdev_logical_ashift and vdev_physical_ashift between
child and parent vdevs as is done for vdev_ashift.
In vdev_open(), restore code that fails opens for devices
where vdev_ashift grows. This can only happen now if the
device's logical ashift grows, which means it really isn't
safe to use the device.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/vdev_impl.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_file.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_mirror.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_missing.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_raidz.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_root.c:
Update the vdev_open() API so that both logical (what was
just ashift before) and physical ashift are reported.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/vdev_impl.h:
Add two new fields, vdev_physical_ashift and vdev_logical_ashift,
to vdev_t.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/spa_config.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/spa.c:
Add vdev_ashift_optimize(). Call it anytime a new top-level
vdev is allocated.
cddl/contrib/opensolaris/cmd/zpool/zpool_main.c:
Add text for the VDEV_AUX_ASHIFT_TOO_BIG error.
For each sub-optimally configured leaf vdev, report configured
and native block sizes.
cddl/contrib/opensolaris/cmd/zpool/zpool_main.c:
cddl/contrib/opensolaris/lib/libzfs/common/libzfs.h:
cddl/contrib/opensolaris/lib/libzfs/common/libzfs_status.c:
Introduce a new zpool status: ZPOOL_STATUS_NON_NATIVE_ASHIFT.
This status is reported on healthy pools containing vdevs
configured to use a block size smaller than their reported
physical block size.
cddl/contrib/opensolaris/lib/libzfs/common/libzfs_status.c:
Update find_vdev_problem() and supporting functions to
provide the full vdev_stat_t structure to problem checking
routines, and to allow decent into replacing vdevs.
Add a vdev_non_native_ashift() validator which is used on
the full vdev tree to check for ZPOOL_STATUS_NON_NATIVE_ASHIFT.
cddl/contrib/opensolaris/lib/libzpool/common/kernel.c:
cddl/contrib/opensolaris/lib/libzpool/common/sys/zfs_context.h:
Enhance sysctl userland stubs now that a SYSCTL_PROC handler
is used in vdev.c.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/metaslab.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/metaslab_impl.h:
When the group membership of a metaslab class changes (i.e.
when a vdev is added or removed from a pool), walk the group
list to determine the smallest block size currently available
and record this in the metaslab class.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/metaslab.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/metaslab.c:
Add the metaslab_class_get_minblocksize() accessor.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zio_compress.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zio_compress.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/arc.c:
In zio_compress_data(), take the minimum blocksize as an
input parameter instead of assuming SPA_MINBLOCKSIZE.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/arc.c:
In l2arc_compress_buf(), pass SPA_MINBLOCKSIZE as the minimum
blocksize of the device. The l2arc code performs has it's own
code for deciding if compression is worth while, so this
effectively disables zio_compress_data() from second guessing
the original decision.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zio.c:
In zio_write_bp_init(), use the minimum blocksize of the
normal metaslab class when compressing data.
Illumos ZFS issues:
3957 ztest should update the cachefile before killing itself
3958 multiple scans can lead to partial resilvering
3959 ddt entries are not always resilvered
3960 dsl_scan can skip over dedup-ed blocks if
physical birth != logical birth
3961 freed gang blocks are not resilvered and can cause pool to suspend
3962 ztest should print out zfs debug buffer before exiting
Fix a regression introduced by fix for Illumos bug #3834. Quote from
Matthew Ahrens on the Illumos issue:
ztest fails this assertion because ztest_dmu_read_write() does
dmu_tx_hold_free(tx, bigobj, bigoff, bigsize);
and then
dmu_object_set_checksum(os, bigobj,
(enum zio_checksum)ztest_random_dsl_prop(ZFS_PROP_CHECKSUM), tx);
If the region to free is past the end of the file, the DMU assumes that there
will be nothing to do for this object. However, ztest does set_checksum(),
which must modify the dnode. The fix is for ztest to also call
dmu_tx_hold_bonus(tx, bigobj);
so we can account for the dirty data associated with setting the checksum
Illumos ZFS issues:
3955 ztest failure: assertion refcount_count(&tx->tx_space_written)
+ delta <= tx->tx_space_towrite
Merge vendor bugfix for ZFS test suite that triggers false positives.
Illumos ZFS issues:
3949 ztest fault injection should avoid resilvering devices
3950 ztest: deadman fires when we're doing a scan
3951 ztest hang when running dedup test
3952 ztest: ztest_reguid test and ztest_fault_inject don't place nice together
Fix zfs send -D hang after processing requiring a CTRL+C to interrupt due to
pthread_join prior to fd close.
This was introduced by r251646 (MFV r251644)
Illumos ZFS issue:
3909 "zfs send -D" does not work
MFC after: 1 day
Bring back some important fixes from Illumos:
3022 DTrace: keys should not affect the sort order when sorting by value
3023 it should be possible to dereference dynamic variables
3024 D integer narrowing needs some work
We particularly avoid the LD_NOLAZYLOAD changes that Illumos made
as those don't apply to FreeBSD and were causing problems in
interactive mode.
Illumos Revision: 13758:23432da34147
Reference:
https://www.illumos.org/issues/3022https://www.illumos.org/issues/3023https://www.illumos.org/issues/3024
MFC after: 1 month
Tested by: markj
GCC can generate bogus dwarf attributes with DW_AT_byte_size
set to 0xFFFFFFFF.
The issue was originaly detected in NetBSD but it has been
adapted for portability and to avoid compiler warnings.
Reference:
https://www.illumos.org/issues/3776
Obtained from: NetBSD
MFC after: 1 month
Restore a previous behavior before r251646, where when destructing
ZFS snapshot, the ioctl would return ENOENT when it hit any of
them in the errlist (the new behavior was only return ENOENT when
all returns error).
Illumos ZFS issues:
3829 fix for 3740 changed behavior of zfs destroy/hold/release ioctl
MFC after: 1 week
zpool create should treat -O mountpoint and -m the same
Illumos ZFS issues:
3745 zpool create should treat -O mountpoint and -m the same
MFC after: 2 weeks
seven arguments.
The original test uses Solaris' uadmin system call to trigger the test
probe; this change adds a sysctl to the dtrace_test module and gets the test
program to trigger the test probe via the sysctl handler.
The test is currently failing on amd64 because of some bugs in the way that
probe arguments beyond the first five are obtained - these bugs will be
fixed in a separate change.
dt_cg_ptrsize() and generally cleans up some of the error handling around
register allocation.
This change corresponds to part of illumos-gate commit e5803b76927480:
3025 register leak in D code generation
Reviewed by: pfg
Obtained from: illumos
MFC after: 1 month
FreeBSD. In the IPv6 case, try each interface before returning an error;
each IPv6-enabled interface will have a link-local address even if the link
isn't up.
MFC after: 1 week
users to guarantee that the output of DTrace scripts will be time-ordered.
This option is enabled by adding the line
#pragma D option temporal
to the beginning of a script, or by adding '-x temporal' to the arguments of
dtrace(1).
This change fixes a bug in the original port of the temporal option. This
bug was causing some assertions to fail, so they had been disabled; in this
revision the assertions are working properly and are enabled.
The DTrace version number has been bumped from 1.9.0 to 1.9.1 to reflect
the language change that's being introduced.
This change corresponds to part of illumos-gate commit e5803b76927480:
3021 option for time-ordered output from dtrace(1M)
Reviewed by: pfg
Obtained from: illumos
MFC after: 1 month
not be installed in /usr/lib32 on systems with compat-32 support.
This fix has two parts. First, the build is forced by linking drti.o
into a dummy internal library. Second, the object file is installed
manually in the LIBRARIES_ONLY case.
MFC after: 3 days
USDT probes are advertised to kernel by initialization code with
atrribute((constructor))). It seems that on Solaris the .init-ish code
of the main object is executed before RD_PREINIT point is hit. On
FreeBSD that is not the case. And because on FreeBSD there is no other
well-defined point between RD_PREINIT and main() we have to parse a
DTrace script when main is hit, for time being.
A footnote: currently we actually post RD_POSTINIT event, but that's a
bug because the event is triggered by hitting r_debug_state which
happens before any init code is executed.
Reported by: markj
snapshot.
Related illumos ZFS issue:
3699 zfs hold or release of a non-existent snapshot does not output error
Reported by: Steven Hartland <smh@FreeBSD.org>
MFC after: 3 days
The following change from illumos brought caused DTrace to
pause in an interactive environment:
3026 libdtrace should set LD_NOLAZYLOAD=1 to help the pid provider
This was not detected during testing because it doesn't
affect scripts.
We shouldn't be changing the environment, especially since the
LD_NOLAZYLOAD option doesn't apply to our (GNU) ld.
Unfortunately the change from upstream was made in such a way
that it is very difficult to separate this change from the
others so, at least for now, it's better to just revert
everything.
Reference:
https://www.illumos.org/issues/3026
Reported by: Navdeep Parhar and Mark Johnston
Merge changes from illumos:
3675 DTrace print() should try to resolve function pointers
3676 dt_print_enum hardcodes a value of zero
Illumos Revision: b1fa6326238973aeaf12c34fcda75985b6c06be1
Reference:
https://www.illumos.org/issues/3675https://www.illumos.org/issues/3676
Obtained from: Illumos
MFC after: 1 month
Merge change from illumos:
1731 DTrace NFS translators should be split into client/server pieces
Illumos Revision: 13523:6763769941d2
This code seems to be currently unused on FreeBSD.
Reference:
https://www.illumos.org/issues/1731
Obtained from: Illumos
MFC after: 1 week
Merge changes from illumos:
3021 option for time-ordered output from dtrace(1M)
3022 DTrace: keys should not affect the sort order when sorting by value
3023 it should be possible to dereference dynamic variables
3024 D integer narrowing needs some work
3025 register leak in D code generation
3026 libdtrace should set LD_NOLAZYLOAD=1 to help the pid provider
This brings yet another feature implemented in upstream DTrace.
A complete description is available here:
http://dtrace.org/blogs/ahl/2012/07/28/my-new-dtrace-favorite/
This change bumps the DT_VERS_* number to 1.9.1 in
accordance to what is done in illumos.
This change was somewhat complicated because upstream is mixed many
changes in an individual commit and some of the tests don't really
apply to us.
There are also appear to be differences in timestamping with Solaris
so we had to workaround some assertions making sure no regression
happened.
Special thanks to Fabian Keil for changes and testing.
Illumos Revisions: 13758:23432da34147
Reference:
https://www.illumos.org/issues/3021https://www.illumos.org/issues/3022https://www.illumos.org/issues/3023https://www.illumos.org/issues/3024https://www.illumos.org/issues/3025https://www.illumos.org/issues/1694
Tested by: Fabian Keil
Obtained from: Illumos
MFC after: 1 months
release a non-existing snapshot of a existing dataset. In recursive case
error is reported if no snapshots with the requested name have been found.
Problem and proposed solution reported to illumos:
3699 zfs hold or release of a non-existent snapshot does not output error
MFC after: 8 days
doesn't copyout in this case.
To solve this issue a new struct zfs_iocparm_t is introduced consisting of:
- zfs_ioctl_version (future backwards compatibility purposes)
- user space pointer to zfs_cmd_t (copyin and copyout)
- size of zfs_cmd_t (verification purposes)
The copyin and copyout of zfs_cmd_t is now done the illumos (vendor) way
what makes porting of new changes easier and ensures correct behavior if
returning an error.
MFC after: 10 days
Merge change from vendor to reduce diff only.
ZFS dtrace probes are not supported on FreeBSD yet.
Illumos ZFS issues:
3598 want to dtrace when errors are generated in zfs
MFC after: 3 weeks
only other case where STT_FILE symbols are used, in symit_next() in
cddl/contrib/opensolaris/tools/ctf/cvt/input.c, save the basename of the
symbol, instead of the full pathname.
Reported by: avg
Tested by: avg, jimharris
MFC after: 1 week
Merge change from illumos:
1368 enablings on defunct providers prevent providers from unregistering
We try to address some underlying differences between the Solaris
and FreeBSD implementations: dtrace_attach() / dtrace_detach() are
currently unimplemented in FreeBSD but the new code from illumos
makes use of taskq so some adaptations were made to dtrace_open()
and dtrace_close() to handle them appropriately.
Illumos Revision: r13430:8e6add739e38
Reference:
https://www.illumos.org/issues/1368
Reviewed by: gnn
Tested by: Fabian Keil
Obtained from: Illumos
MFC after: 3 weeks
for and loading dependent modules. This addresses a bug seen with
io.d where it was being doubly included.
PR: 171678
Submitted by: Mark Johnston
MFC after: 2 weeks
Merge change from illumos:
1694 Add type-aware print() action
This is a very nice feature implemented in upstream Dtrace.
A complete description is available here:
http://dtrace.org/blogs/eschrock/2011/10/26/your-mdb-fell-into-my-dtrace/
This change bumps the DT_VERS_* number to 1.9.0 in
accordance to what is done in illumos.
While here also include some minor cleanups to ease further merging
and appease clang with a fix by Fabian Keil.
Illumos Revisions: 13501:c3a7090dbc16
13483:f413e6c5d297
Reference:
https://www.illumos.org/issues/1560https://www.illumos.org/issues/1694
Tested by: Fabian Keil
Obtained from: Illumos
MFC after: 1 month
Merge changes from illumos:
1451 DTrace needs toupper()/tolower() subroutines
1457 lltostr() D subroutine should take an optional base
This change bumps the DT_VERS_* number to 1.8.1 in
accordance to what is done in illumos.
The test suite we currently include is outdated and
doesnt support some updates in tst.subr.d which had to
be left out for now.
Illumos Revisions: r13458 5e394d8db762
r13459 c3454574dd1a
Reference:
https://www.illumos.org/issues/1451https://www.illumos.org/issues/1457
Tested by: Fabian Keil
Obtained from: Illumos
MFC after: 1 month
Merge change from illumos:
1455 DTrace tracemem() should take an optional size argument
Our local enhancements to dt_print_bytes were equivalent to
those in illumos but we made it match the illumos version
to ease further code merges.
For now leave out tst.smallsize.d and tst.smallsize.d.out
since those don't seem to work cleanly on FreeBSD.
This change bumps the DT_VERS_* number to 1.7.1 in accordance
to what is done in illumos.
Illumos Revision: 13457:571b0355c2e3
Reference:
https://www.illumos.org/issues/1455
Tested by: Fabian Keil
Obtained from: Illumos
MFC after: 1 month
It is not guaranteed that a program has a symbol table entry for main
and thus that it would be possible to set a breakpoint on it.
Reviewed by: rpaulo
Discussed with: rpaulo
MFC after: 13 days
includes MFV 238590, 238592, 247580
MFV 238590, 238592:
In the first zfs ioctl restructuring phase, the libzfs_core library was
introduced. It is a new thin library that wraps around kernel ioctl's.
The idea is to provide a forward-compatible way of dealing with new
features. Arguments are passed in nvlists and not random zfs_cmd fields,
new-style ioctls are logged to pool history using a new method of
history logging.
http://blog.delphix.com/matt/2012/01/17/the-future-of-libzfs/
MFV 247580 [1]:
To address issues of several deadlocks and race conditions the locking
code around dsl_dataset was rewritten and the interface to synctasks
was changed.
User-Visible Changes:
"zfs snapshot" can create more arbitrary snapshots at once (atomically)
"zfs destroy" destroys multiple snapshots at once
"zfs recv" has improved performance
Backward Compatibility:
I have extended the compatibility layer to support full backward
compatibility by remapping or rewriting the responsible ioctl arguments.
Old utilities are fully supported by the new kernel module.
Forward Compatibility:
New utilities work with old kernels with the following restrictions:
- creating, destroying, holding and releasing of multiple snapshots
at once is not supported, this includes recursive (-r) commands
Illumos ZFS issues:
2882 implement libzfs_core
2900 "zfs snapshot" should be able to create multiple,
arbitrary snapshots at once
3464 zfs synctask code needs restructuring
References:
https://www.illumos.org/issues/2882https://www.illumos.org/issues/2900https://www.illumos.org/issues/3464 [1]
MFC after: 1 month
Sponsored by: Hybrid Logic Inc. [1]
- provide complete backwards compatibility (old utility, new kernel)
- add zfs_cmd_t compatibility mapping in both directions
- determine ioctl address in zfs_ioctl_compat.c
Import minor ZFS changes from vendor
Illumos ZFS issues:
3604 zdb should print bpobjs more verbosely (fix zdb hang)
3606 zpool status -x shouldn't warn about old on-disk format
MFC after: 3 days
puts the full original source filename in the STT_FILE entry of the ELF
symbol table, while gcc saves only the basename.
Since the DWARF DW_AT_name attribute contains the full source filename,
both for clang and gcc, ctfconvert takes just the basename of it, for
matching with the STT_FILE entry. So when attempting to match with such
an entry, use its basename, if necessary.
Reported by: avg
MFC after: 1 week
Merge new read-only zfs properties from vendor (illumos)
Illumos ZFS issues:
3588 provide zfs properties for logical (uncompressed) space used and
referenced
References:
https://www.illumos.org/issues/3588
MFC after: 2 weeks
in r247265 (ZFS deadman thread). Both new utilities now support the old
kernel and new kernel properly detects old utilities.
For future backwards compatibility, the vfs.zfs.version.ioctl read-only
sysctl has been introduced. With this sysctl zfs utilities will be able
to detect the ioctl interface version of the currently loaded zfs module.
As a side effect, the zfs utilities between r247265 and this revision don't
support the old kernel module. If you are using HEAD newer or equal than
r247265, install the new kernel module (or whole kernel) first.
MFC after: 10 days
Merge the ZFS I/O deadman thread from vendor (illumos).
This feature panics the system on hanging ZFS I/O, helps debugging
and resumes failed service.
The panic behavior can be controlled with the loader-only tunables:
vfs.zfs.deadman_enabled (enable or disable panic on stalled ZFS I/O)
vfs.zfs.deadman_synctime (expiration time for stalled ZFS I/O)
By default, ZFS I/O deadman is enabled by default on amd64 and i386
excluding virtual guest machines.
Illumos ZFS issues:
3246 ZFS I/O deadman thread
References:
https://www.illumos.org/issues/3246
MFC after: 2 weeks
kernel. Properly restore, continue, and detach from processes
being DTraced when DTrace exits with an error so the program
being inspected is not terminated.
cddl/contrib/opensolaris/cmd/dtrace/dtrace.c:
In fatal(), the generic error handler, close the DTrace
handle as is done in the "probe/script" error handler
dfatal(). fatal() can be invoked after DTrace attaches
to processes (e.g. a script specified by command line
argument can't be found) and closing the handle will
release them.
Submitted by: Spectra Logic Corporation
Reviewed by: rpaulo, gnn
* Illumos zfs issue #3035 [1] LZ4 compression support in ZFS.
LZ4 is a new high-speed BSD-licensed compression algorithm created
by Yann Collet that delivers very high compression and decompression
performance compared to lzjb (>50% faster on compression, >80% faster
on decompression and around 3x faster on compression of incompressible
data), while giving better compression ratio [1].
This version of LZ4 corresponds to upstream's [2] revision 85.
Please note that for obvious reasons this is not backward read
compatible. This means once a pool have LZ4 compressed data, these
data can no longer be read by older ZFS implementations.
Local changes:
- On-stack hash table disabled and using kernel slab allocator
instead, at this time. This requires larger kernel thread stack
for zio workers. This may change in the future should we adjusted
the zio workers' thread stack size.
- likely and unlikely will be undefined if they are already defined,
this is required for i386 XEN build.
- Removed De Bruijn sequence based __builtin_ctz family of builtins
in favor of the latter. Both GCC and clang supports these builtins.
- Changed the way the LZ4 code detects endianness.
- Manual pages modifications to mention the feature based on Illumos
counterpart.
- Boot loader changes to make it support LZ4 decompression.
[1] https://www.illumos.org/issues/3035
[2] http://code.google.com/p/lz4/source/list
Obtained from: Illumos (13921:9d721847e469)
Tested on: FreeBSD/amd64
MFC after: 1 month
of files other than the actual libraries.
Use LIBRARIES_ONLY to supress the inclusion of files in the lib32
distribution that are duplicates of files in base.
Sponsored by: DARPA, AFRL
Reviewed by: emaste
the underlying zap_count() to return no errors. However, it is possible
that the pool reaches to such a state where zap_count would return error,
leading to panics when a pool is imported.
This commit changes the ddt_zap_count to return error returned from
zap_count and handle the error appropriately. With this change, it's now
possible to let zpool rollback damaged transaction groups and import the
pool.
Obtained from: ZFS on Linux github (e8fd45a0f9)
MFC after: 1 month
random order instead of creation order.
Eliminates needless filesystem renames caused by removed parent snapshots
which subsequently causes many more errors.
PR: kern/172259
Submitted by: Steven Hartland
Reviewed by: pjd (mentor)
Approved by: pjd (mentor)
MFC after: 2 weeks
Introduce a new dataset aclmode setting "restricted" to protect ACL's
being destroyed or corrupted by a drive-by chmod.
illumos-gate 13889:a67716f16746
3254 add support in zfs for aclmode=restricted
References:
https://www.illumos.org/issues/3254
MFC after: 2 weeks
Import the zio nop-write improvement from Illumos. To reduce I/O,
nop-write omits overwriting data if the checksum (cryptographically
secure) of new data matches the checksum of existing data.
It also saves space if snapshots are in use.
It currently works only on datasets with enabled compression, disabled
deduplication and sha256 checksums.
IllumOS 13887:196932ec9e6a and 13888:7204b3392a58
3236 zio nop-write
References:
https://www.illumos.org/issues/3236
MFC after: 2 weeks
Illumos 13886:e3261d03efbf
3349 zpool upgrade -V bumps the on disk version number, but leaves
the in core version
References:
https://www.illumos.org/issues/3349
MFC after: 1 week
Illumos r13840:97fd5cdf328a:
3145 single-copy arc
3212 ztest: race condition between vdev_online() and spa_vdev_remove()
Illumos r13849:3468a95b27cd:
3258 ztest's use of file descriptors is unstable
There is one known issue: Some probes will display an error message along the
lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different
binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect
problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.
The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.
Conducted and reviewed by: attilio
Tested by: pho
doesn't exist on a dataset we are starting from. For example if we
have the following configuration:
tank
tank/foo
tank/foo@snap
tank/bar
tank/bar@snap
We can execute:
# zfs destroy -t tank@snap
eventhough tank@snap doesn't exit.
Unfortunately it is not possible to do the same with recursive rename:
# zfs rename -r tank@snap tank@pans
cannot open 'tank@snap': dataset does not exist
...until now. This change allows to recursively rename snapshots even if
snapshot doesn't exist on the starting dataset.
Sponsored by: rsync.net
MFC after: 2 weeks
The code builds a map of regions that were freed. On every write the
code consults the map and eventually removes ranges that were freed
before, but are now overwritten.
Freed blocks are not TRIMed immediately. There is a tunable that defines
how many txg we should wait with TRIMming freed blocks (64 by default).
There is a low priority thread that TRIMs ranges when the time comes.
During TRIM we keep in-flight ranges on a list to detect colliding
writes - we have to delay writes that collide with in-flight TRIMs in
case something will be reordered and write will reached the disk before
the TRIM. We don't have to do the same for in-flight writes, as
colliding writes just remove ranges to TRIM.
Sponsored by: multiplay.co.uk
This work includes some important fixes and some improvements obtained
from the zfsonlinux project, including TRIMming entire vdevs on pool
create/add/attach and on pool import for spare and cache vdevs.
Obtained from: zfsonlinux
Submitted by: Etienne Dechamps <etienne.dechamps@ovh.net>
impatient if we sent more than 2 INT signals. This fixes a bug where
we wouldn't see aggregations print on the command line if we Ctrl-C'd
a dtrace script or command line invocation.
MFC after: 2 weeks
Merge changes from illumos
906 dtrace depends_on pragma should search all library paths, not just the
current one
949 dtrace should only include the first instance of a library found on
its library path
Illumos Revisions: 13353:936a1e45726c
13354:2b2c36a81512
Reference:
https://www.illumos.org/issues/906https://www.illumos.org/issues/949
Tested by: Fabian Keil
Obtained from: Illumos
MFC after: 3 weeks
These probes are most useful when looking into the structures
they provide, which are listed in io.d. For example:
dtrace -n 'io:genunix::start { printf("%d\n", args[0]->bio_bcount); }'
Note that the I/O systems in FreeBSD and Solaris/Illumos are sufficiently
different that there is not a 1:1 mapping from scripts that work
with one to the other.
MFC after: 1 month
Bryan Cantrill implemented the equivalent of semi-log graph
paper for Dtrace so llquantize will use one logarithmic and
one linear scale.
Special thanks to Mark Peek for providing fix to an
assertion and to Fabian Keill for testing the port.
Illumos Revision: 13355:15b74a2a9a9d
Reference:
https://www.illumos/issues/905
Obtained from: Illumos
Tested by: Fabian Keill, mp
MFC after: 4 days
1948 zpool list should show more detailed pool information
Display per-vdev information with "zpool list -v".
The added expandsize property has currently no value on FreeBSD.
This changeset allows adding expansion support to individual vdevs
in the future.
References:
https://www.illumos.org/issues/1948
Obtained from: illumos (issue #1948)
MFC after: 2 weeks
2703 add mechanism to report ZFS send progress
If the zfs send command is used with the -v flag, the amount of bytes
transmitted is reported in per second updates.
References:
https://www.illumos.org/issues/2703
Obtained from: illumos (issue #2703)
MFC after: 2 weeks
in the system-wide version of <stdlib.h> by wrapping the #include_next
<stdlib.h> within the scope of its own header protection. On FreeBSD this has
no effect, since both header protections are equivalent. However the GNU version
of <stdlib.h> implements a special header protection mechanism which allows it
to be included multiple times (in different modes).
Simply by moving the #include_next off the header protection, we allow
system-wide <stdlib.h> to implement its own protection policy, whichever that
may be.
to follow the example of OpenSolaris and its descendants, which implemented
cpu as an inline that took a value out of curthread. At certain points in
the FreeBSD scheduler curthread->td_oncpu will no longer be valid (in
particukar, just before the thread gets descheduled) so instead I have
implemented this as its own built-in variable.
Sponsored by: Sandvine Inc.
MFC after: 1 week
CTF format is not cross-platform by design, e.g. it is not guaranteed
that data generated by ctfconvert/ctfmerge on one architecture will
be successfuly read on another. CTF structures are saved/restored
using naive approach. Roughly it looks like:
write(fd, &ctf_struct, sizeof(ctf_struct))
read(fd, &ctf_struct, sizeof(ctf_struct))
By sheer luck memory layout of all type-related CTF structures is the same
on amd64/i386/mips32/mips64. It's different on ARM though. sparc, ia64,
powerpc, and powerpc64 were not tested. So in order to get file compatible
with dtrace on ARM it should be compiled on ARM. Alternative solution would
be to have "signatures" for every platform and ctfmerge should convert host's
reperesentation of CTF structure to target's one using "signature" as template.
This patch checks byte order of ELF files used for generating CTF record
and makes sure that byte order of data written to resulting files is the same
as target's byte order.
allow.mount.zfs:
allow mounting the zfs filesystem inside a jail
This way the permssions for mounting all current VFCF_JAIL filesystems
inside a jail are controlled wia allow.mount.* jail parameters.
Update sysctl descriptions.
Update jail(8) and zfs(8) manpages.
TODO: document the connection of allow.mount.* and VFCF_JAIL for kernel
developers
MFC after: 10 days
add support for "-t <datatype>" argument to zfs get
References:
https://www.illumos.org/issues/1936
Update zfs(8) manpage in respect of [1].
Fix typo in zfs(8) manpage.
Obtained from: illumos (issue #1936)
MFC after: 1 week
happen to have a .exe extension.
While here fix the shebang of a shell script that
was looking for /bin/bash.
Reviewed by: gnn
Approved by: jhb (mentor)
MFC after: 2 weeks
names and wants to sort them by name, ie. when executes:
# zfs list -t snapshot -o name -s name
Because only name is needed we don't have to read all snapshot properties.
Below you can find how long does it take to list 34509 snapshots from a single
disk pool before and after this change with cold and warm cache:
before:
# time zfs list -t snapshot -o name -s name > /dev/null
cold cache: 525s
warm cache: 218s
after:
# time zfs list -t snapshot -o name -s name > /dev/null
cold cache: 1.7s
warm cache: 1.1s
MFC after: 1 week
uint64_t values are snprintf'd using %llx. On amd64, uint64_t is
typedef'd as unsigned long, so cast the values to u_longlong_t, as is
done similarly in the rest of the file.
MFC after: 1 week
uint64_t values are snprintf'd using %llx. On amd64, uint64_t is
typedef'd as unsigned long, so cast the values to u_longlong_t, as is
done similarly in the rest of the file.
MFC after: 1 week
dt_popc() function assumes that either _ILP32 or _LP64 is defined,
otherwise it has no suitable implementation.
However, the _ILP32 and _LP64 macros come from isa_defs.h, which is not
included in this file. Add the include now, to get the macros defined.
MFC after: 1 week
This code only runs on i386 and amd64, so there should be no problems if
buf + sec->dofs_offset is not aligned (which is unlikely anyway).
MFC after: 1 week
bsd.prog.mk -- we need to compile PIC, which requires a library build.
With this change, USDT (userspace DTrace probes) work from within
shared libraries.
PR: kern/159046
Submitted by: Alex Samorukov <samm at os2.kiev.ua>
Comments by: Scott Lystig Fritchie <slfritchie at snookles.com>
MFC after: 3 days
The zfs(8) and zpool(8) manual pages now match the state of the ZFS module
and have been customized for FreeBSD.
The new texts of the "Deduplication" subsection in zfs(8), the zpool "split"
command, the zfs "dedup" property and several other missing parts have been
added from illumos or OpenSolaris snv_134 (CDDL-licensed).
The mdoc(7) reimplementation of whole manual pages, the descriptions of the
zpool "readonly" property, "zfs diff" command and descriptions of several
other missing command flags and/or options were authored by myself.
MFC after: 1 week
Manual pages from OpenSolaris svn_134 are still properly CDDL licensed
but I have been informed that the parts from s11ex are uncertain even
if they contain a CDDL header.
Improved alignment for a maximum width of 80 characters.
Mark unsupported parts as such.
Reported to vendor: Illumos issue #1801
References:
https://www.illumos.org/issues/1801
Obtained from: OpenSolaris CDDL manual pages (snv_134, s11express) [1]
MFC after: 4 days
- synchronized to match new vendor code [1]
- removed ATTRIBUTES sections
- updated SEE ALSO sections
- properly updated copyright information (required by CDDL)
- remove empty lines via MANFILTER
Obtained from: Illumos [1]
MFC after: 5 days
- synchronized to match new vendor code (Illumos rev. 13513) [1]
- removed references to sun commands (replaced with FreeBSD commands)
- removed ATTRIBUTES sections
- updated SEE ALSO sections
- properly updated copyright information (required by CDDL)
- remove empty lines via MANFILTER
zfs(8) only:
- replaced "Zones" section with new "Jails" section
- removed misleading "ZFS Volumes as Swap or Dump Devices" section
- updated shareiscsi and sharesmb option information (not supported on FreeBSD)
- replace zoned property with jailed property
zpool(8) only:
- updated device names in examples
Obtained from: Illumos (as of rev. 13513:f84d4672fdbd) [1]
MFC after: 1 week
952 separate intent logs should be obvious in 'zpool iostat' output
1337 `zpool status -D' should tell if there are no DDT entries
References:
https://www.illumos.org/issues/952https://www.illumos.org/issues/1337
Obtained from: Illumos (issues 952, 1337; changesets 13384, 13432)
MFC after: 1 week
are linked with libraries they don't use:
- zinject doesn't use libavl
- ztest doesn't use libz
- zdb uses neither libavl nor libz
- zfs uses neither libbsdxml nor libm, nor libsbuf
- zpool uses neither libbsdxml nor libm, nor libsbuf
In addition, libzfs needs libm because it uses pow(), however it isn't
linked with -lm. This went unnoticed because all its users had -lm before.
Reviewed by: pjd, mm
Approved by: kib (mentor)
MFC after: 1 week
non-legacy mountpoints. It is better to be able to rename such file systems and
let them be mounted in old places until next reboot than using live CD, etc. to
rename with remount.
This is implemented by adding -u option to 'zfs rename'. If file system's
mountpoint property is set to 'legacy' or 'none', there is no need to specify -u.
Update zfs(8) manual page to reflect this addition.
MFC after: 2 weeks
It is possible for file systems with 'mountpoint' preperty set to 'legacy'
or 'none' - we don't have to change mount directory for them.
Currently such file systems are unmounted on rename and not even mounted back.
This introduces layering violation, as we need to update 'f_mntfromname'
field in statfs structure related to mountpoint (for the dataset we are
renaming and all its children).
In my opinion it is worth it, as it allow to update FreeBSD in even cleaner
way - in ZFS-only configuration root file system is ZFS file system with
'mountpoint' property set to 'legacy'. If root dataset is named system/rootfs,
we can snapshot it (system/rootfs@upgrade), clone it (system/oldrootfs),
update FreeBSD and if it doesn't boot we can boot back from system/oldrootfs
and rename it back to system/rootfs while it is mounted as /. Before it was
not possible, because unmounting / was not possible.
MFC after: 2 weeks
or mountpoint=legacy that have children datasets. This also fixes dataset
rename when receiving incremental snapshots as reported on freebsd-fs@
This assertion was made triggerable by opensolaris change #10196.
PR: bin/160400
Reviewed by: pjd
MFC after: 1 week
in the case of a held dataset during remount.
Detailed description is available at:
https://www.illumos.org/issues/883
illumos-gate revision: 13380:161b964a0e10
Reviewed by: pjd
Approved by: re (kib)
Obtained from: Illumos (Bug #883)
MFC after: 3 days
devices are imbalanced zfs will lots of CPU searching for space on devices
which tend to be pretty full. It should instead fail quickly on the full
devices and move onto devices which have more availability.
New loader tunable: vfs.zfs.mg_alloc_failures (min = 8)
Illumos-gate changeset: 13379:4df42cc92254
Obtained from: Illumos (Bug #1051)
MFC after: 2 weeks
cddl/contrib/opensolaris/cmd/zpool/zpool.8:
cddl/contrib/opensolaris/lib/libzfs/common/libzfs_import.c:
Add the "zpool labelclear" command. This command can be
used to wipe the label data from a drive that is not
active in a pool. The optional "-f" argument can be
used to treat an exported or foreign vdev as "inactive"
thus allowing its label information to be cleared.
perform pool actions is always displayed.
cddl/contrib/opensolaris/cmd/zpool/zpool_main.c:
The "zpool status" command reports the "last seen at"
device node path when the vdev name is being reported
by GUID. Augment this code to assume a GUID is reported
when a device goes missing after initial boot in addition
to the previous behavior of doing this for devices that
aren't seen at boot.
cddl/contrib/opensolaris/lib/libzfs/common/libzfs_pool.c:
In zpool_vdev_name(), report recently missing devices
by GUID. There is no guarantee they will return at
their previous location.
cddl/contrib/opensolaris/lib/libzfs/common/libzfs_pool.c:
o Add zpool_pool_state_to_name() API to libzfs which converts a
pool_state_t into a user consumable string.
o While here, correct constness of make zpool_state_to_name()
and zpool_label_disk().
MFD after: 1 week
For snapshots, this is the same as COMPRESSRATIO, but for
filesystems/volumes, the COMPRESSRATIO is based on the data "USED" (ie,
includes blocks in children, but not blocks shared with the origin).
This is needed to figure out how much space a filesystem would use if it
were not compressed (ignoring snapshots).
Illumos-gate revision: 13387
Obtained from: Illumos (Feature #1092)
MFC after: 2 weeks
but just have a comment that this is broken.
This is just a bandaid until somebody can fix this correctly. The code
is just a broken as it was before r223262 - now buildworld just doesn't
fail.
Tested by: i386 + amd64 buildworld
With hat: benl co-mentor
OpenSolaris and ZFS header files. These changes are sufficient
to allow a C++ program to use the libzfs library.
Note: The majority of these files already included 'extern "C"'
declarations, so the intention of providing C++ compatibility
already existed even if it wasn't provided.
cddl/compat/opensolaris/include/assert.h:
Wrap our compatibility assert implementation in
'extern "C"'. Since this is a compatibility header
I matched the Solaris style of doing this explicitly
rather than rely on FreeBSD's __BEGIN/END_DECLS macro.
sys/cddl/compat/opensolaris/sys/kstat.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/arc.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_pool.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/ddt.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/spa.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zio.h:
Rename parameters in function declarations that conflict
with C++ keywords. This was the solution preferred by
members of the Illumos community.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zfs_ioctl.h:
In C, nested structures are visible in the global namespace,
but in C++, they take on the namespace of the structure in
which they are contained. Flatten nested structure
definitions within struct zfs_cmd so these structures are
visible in the global namespace when compiled in both
languages.
Sponsored by: Spectra Logic Corporation
Few new things available from now on:
- Data deduplication.
- Triple parity RAIDZ (RAIDZ3).
- zfs diff.
- zpool split.
- Snapshot holds.
- zpool import -F. Allows to rewind corrupted pool to earlier
transaction group.
- Possibility to import pool in read-only mode.
MFC after: 1 month
have an executable stack, due to linking in hand-assembled .S or .s
files, that have no .GNU-stack sections:
RWX --- --- /lib/libcrypto.so.6
RWX --- --- /lib/libmd.so.5
RWX --- --- /lib/libz.so.6
RWX --- --- /lib/libzpool.so.2
RWX --- --- /usr/lib/liblzma.so.5
These were found using scanelf, from the sysutils/pax-utils port.
Reviewed by: kib
if creating a mirror by attaching a new vdev to a root pool.
Reported by: James R. Van Artsdalen (on freebsd-fs@freebsd.org)
Approved by: delphij (mentor)
MFC after: 3 days
Retry IO once with ZIO_FLAG_TRYHARD before declaring a pool faulted
OpenSolaris revision and Bug IDs:
9725:0bf7402e8022
6843014 ZFS B_FAILFAST handling is broken
Approved by: delphij (mentor)
Obtained from: OpenSolaris (Bug ID 6843014)
MFC after: 3 weeks
OpenSolaris revision and Bug IDs:
9701:cc5b64682e64
6803605 should be able to offline log devices
6726045 vdev_deflate_ratio is not set when offlining a log device
6599442 zpool import has faults in the display
Approved by: delphij (mentor)
Obtained from: OpenSolaris (Bug ID 6803605, 6726045, 6599442)
MFC after: 3 weeks
linking process. This is needed because we change the source object
files and the second this dtrace -G is run, no probes will be found.
This hack allows us to build postgres with DTrace probes enabled. I'll
try to find a way to fix this without needing this hack.
Sponsored by: The FreeBSD Foundation
