- General style(9) cleanup -- white space, braces, line wraps, etc.
- Annotate a lack of synchronization the global route cache if the input
routine is invoked with parallelism.
- Remove unused debugging code.
routing:
- style(9) cleanup -- white space, braces, etc.
- Make include guards consistent with our more general naming
convention.
- Rearrange and complete forward structure declarations in at_extern.h,
remove testing of guards of various other include files to protect
function declarations.
This leaves an ifdef _KERNEL in at_var.h, but from inspection it seems
likely that this file is not actually safe for inclusion in user space
still. However, since it's not included from within src/ so this does
not appear to be an issue (ifconfig, etc, have migrated to the generic
cross-protocol ioctls for address operations).
etc, changes.
Remove a small amount of #if !defined(__FreeBSD__) code.
Add missing include guard for _NETATALK_AARP_H_.
Remove unneeded (and conflicting) extern prototype for aarptfree().
call, its semantics were unintentionally changed. It went from
returning the time state to returning 0 or -1. Since 0 means time
normal, and non-zero effectively only shows up around leap seconds,
this went unnoticed until now. At least unnoticed until someone was
trying to run a binary they didn't have source for and it was
misbehaving...
Submitted by: Judah Levine
MFC After: 2 weeks
members right. However, it also said it was aligned(1), which meant
that gcc generated really bad code. Mark this as aligned(4). This
makes things a little faster on arm (a couple percent), but also saves
about 30k on the size of the kernel for arm.
I talked about doing this with bde, but didn't check with him before
the commit, so I'm hesitant say 'reviewed by: bde'.
- Use printf() and device_printf() instead of log() in ichsmb(4).
- Create the mutex sooner during ichsmb(4) attach.
- Attach the interrupt handler later during ichsmb(4) attach to avoid
races.
- Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus
driver does this already.
- Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and
viapm(4).
- Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values
into BARs, and the PCI bus layer will allocate resources now if needed.
- Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4)
attached to the PCI device and created an intsmb(4) child. Now,
intsmb(4) just attaches to PCI directly.
- Change several intsmb functions to take a softc instead of a device_t
to make things simpler.
KERNBASE for the first 1 MB of RAM instead of calling pmap_mapdev().
pmap_mapdev() knows how to handle the first 1 MB (and has known for a
while now) and properly maps the memory as UC to boot.
MFC after: 2 weeks
preemptions when adjusting the priority of a thread that is on a run
queue. This was only observed when FULL_PREEMPTION was enabled.
Reported by: kris
Diagnosed by: ups
MFC after: 1 week
that piggybacks on bce_tick() callout.
- Instead of unconditionally resetting the controller, try to
skip the reset in case we got a pause frame, like em(4) did.
- Lock bce_tick() using callout_init_mtx().
Discussed with/Reviewed by: glebius, scottl, davidch
we actually issue preemptions.
- Remove the #ifdef IPI_PREEMPTION so it is always compiled in. Leave
the option which optionally enables support in sched_4bsd. sched_ule.c
will soon use this functionality as a run time rather than compile time
option.
- Compare against the idlethread rather than the priority. There are some
idle prio tasks that we can preempt.
Discussed with: ups
Tested on: i386, amd64
allocations were made using improper flags in interrupt context.
Replace with a simple WITNESS warning call. This restores the
invariant that M_WAITOK allocations will always succeed or die
horribly trying, which is relied on by many UMA consumers.
MFC after: 3 weeks
Discussed with: jhb
NOTES though, as ofw_syscons(4) doesn't properly interface with
syscons(4) regarding loading the font specified with SC_DFLT_FONT,
causing a kernel with both options SC_OFWFB and SC_NO_MODE_CHANGE
to not link.
not needed if the proper ordering is done in attach and shutdown.
Remove usage of if_timer/watchdog and roll my own by piggybacking
off the tick() function.
Use the new usb system to allocate task queues instead of using
the system wide thread for taskqueues.
for usb. I hope that this will eventually be used for generic devices
that need full fledged blocking threads for event processing.
Create a taskqueue:
void usb_ether_task_init(device_t, int, struct usb_taskqueue *);
Enqueue a task:
void usb_ether_task_enqueue(struct usb_taskqueue *, struct task *);
Wait for all tasks queued to complete:
void usb_ether_task_drain(struct usb_taskqueue *, struct task *);
Destroy the taskqueue:
void usb_ether_task_destroy(struct usb_taskqueue *);
University of Washington copyrights, which include the
advertising clause. Move $NetBSD$ into standard location for
FreeBSD source files, and normalize formatting.
MFC after: 3 days
the UCB license now excludes the advertising clause. I'm not
interested in it either, so move my copyright. This leaves
only a CGD copyright with the advertising clause.
MFC after: 3 days
the state machine clocks to INIT, node references are not reclaimed.
Add a new routine ieee80211_drain_ifq that does this and use it
instead of IF_DRAIN.
Submitted by: Sepherosa Ziehau
Obtained from: DragonFly
MFC after: 1 month
- Sort by date in license blocks, oldest copyright first.
- All rights reserved after all copyrights, not just the first.
- Use (c) to be consistent with other entries.
MFC after: 3 days
o add IEEE80211_F_JOIN flag to ieee80211_fix_rate to indicate a station
is joining a BSS; this is used to control whether or not we over-write
the basic rate bit in the calculated rate set
o fix ieee80211_fix_rate to honor IEEE80211_F_DODEL when IEEE80211_F_DONEGO
is not specified (e.g. when joining an ibss network)
o on sta join always delete unusable rates from the negotiated rate set,
this was being done only ibss networks but is also needed for 11g bss
with mixed stations
o on sta join delete unusable rates from the bss node's rate set, not the
scan table entry's rate set
o when calculating a rate set for new neighbors in an ibss caculate a
negotiated rate set so drivers are not presented with rates they should
not use
Submitted by: Sepherosa Ziehau (w/ modifications)
Obtained from: DragonFly
MFC after: 1 month
- Clear the PCI AFSR and status error bits as previous errors still
might be indicated.
- Set up the PCI control and diagnostic registers according to the
capabilities, workarounds, etc of/for specific revisions of the
supported bridges. This includes no longer setting Hummingbird-/
Sabre-specific bits in the PCI control register but preserving
what the firmware has initialized them to like OpenSolaris does.
Previously we were setting these bits according to the example in
the Sabre documentation, which I doubt is appropriate for all
Sabre based designs and especially not for Hummingbirds. This
also includes not enabling bus parking unless the firmware tells
us to.
- Set the PCI latency timer register as this isn't always done by
the firmware.
o Remove a redundant argument from psycho_set_intr() and in this
function check the return value of bus_setup_intr(). [2]
o Let psycho_setup_intr() return ENOMEM instead of 0 when it can't
allocate memory for the interrupt wrapper stub and EINVAL instead
of 0 if it can't find the interrupt vector in the interrupt map.
o Add a workaround for a bug of the Sabre-APB-combination where it
doesn't drain DMA write data for devices behind additional PCI-PCI
bridges underneath the APB PCI-PCI bridge. This workaround (do
things necessary in order to achieve a manual drain when coherency
is required) is currently implemented in psycho_setup_intr() and
psycho_intr_stub() (for easy MFC'ing) and therefore is only applied
for interrupt handlers. This should be moved to psycho(4)-specific
bus_dma_tag_create() and bus_dmamap_sync() methods, respectively,
once this driver is converted to make use of BUS_GET_DMA_TAG(), so
the workaround is also applied for polling(4) callbacks. [3]
o Fix some minor style issues.
Info from: OpenSolaris [1]
Info from: Linux, OpenBSD, OpenSolaris [3]
Suggested by: Coverity Prevent (CID 682) [2]
MFC after: 1 month
firmware (mainly 'pmu' and its 'lomp' dupe found in a couple of
later USII{e,i}-based machines) by checking whether a device with
the same triple of bus number, slot and function already has been
added. This is the simple yet effective approach introduced in
OpenBSD some time ago, but which has the flaw that it assumes
that the device and its dupe(s) found in the OFW device tree are
equal or at least the one encountered first is in some way the
more important one (this is the case with 'pmu' and 'lomp'; the
'pmu' node has couple of properties and children while the 'lomp'
one misses most of these). If there's ever a device/dupe pair
where we don't encounter the more important node first, we'll
probably need to introduce a quirk list in order to add the
desired device but prevent its dupe(s) from being added.
MFC after: 1 week
link state changes. Instead, build new speed/duplex/flow-control
settings from the values reported from PHY.
This should fix speed/duplex/flow-control mismatches between GMAC and
PHY which resulted in very poor Rx performance due to lots of
out-of-order packet delivery.
Reported by: Arno J. Klaassen <arno AT heho DOT snv DOT jussieu DOT fr>
Tested by: Arno J. Klaassen <arno AT heho DOT snv DOT jussieu DOT fr>
modern dual-core systems as well.
- Parse the _CST packages for each cpu and track all the states individually,
on a per-cpu basis.
- Revert to generic FADT/P_BLK based Cx control if the _CST package
is not present on all cpus. In that case, the new driver will
still support per-cpu Cx state handling. The driver will determine the
highest Cx level that can be supported by all the cpus and configure the
available Cx state based on that.
- Fixed the case where multiple cpus in the system share the same
registers for Cx state handling. To do that, added a new flag
parameter to the acpi_PkgGas and acpi_bus_alloc_gas functions that
enable the caller to add the RF_SHAREABLE flag. This flag could also be
useful to other callers (acpi_throttle?) in the tree but this change is
not yet made.
- For Core Duo cpus, both cores seems to be taken out of C3 state when
any one of the cores need to transition out. This broke the short sleep
detection logic. It is disabled now if there is more than one cpu in
the system for now as it fixed it in my case. This quirk may need to
be re-enabled later differently.
- Added support to control cx_lowest on a per-cpu basis. There is still
a generic cx_lowest to enable changing cx_lowest for all cpus with a single
sysctl and for ease of use. Sample output for the new sysctl:
dev.cpu.0.cx_supported: C1/1 C2/1 C3/57
dev.cpu.0.cx_lowest: C3
dev.cpu.0.cx_usage: 0.00% 43.16% 56.83%
dev.cpu.1.cx_supported: C1/1 C2/1 C3/57
dev.cpu.1.cx_lowest: C3
dev.cpu.1.cx_usage: 0.00% 45.65% 54.34%
hw.acpi.cpu.cx_lowest: C3
This work was done by Stephane E. Potvin with some simple reworking by
myself. Thank you.
Submitted by: Stephane E. Potvin <sepotvin / videotron.ca>
MFC after: 2 weeks
recording enabled some programs (audio/audacity from ports) can't
correctly enumerate all /dev/dsp device.
Note: previous commit did not enable some debugging stuff, my eyes did
misread "#undef" as "#define".
Submitted by: Yuriy Tsibizov <Yuriy.Tsibizov@gfk.ru>
Now (ok it's been a while...) that FreeBSD has RLIMIT_AS too, we can use
it in the linuxolator instead of ignoring it.
This fixes a LTP test.
Submitted by: rdivacky
No need to lock prison in a case of linux_use26 because the int
setting is atomic and process cannot leave jail.
Submitted by: kib
Reviewed by: jhb
Requested by: rdivacky
Dont lock em in a case of just using em->shared->group_pid because
the group_pid never changes.
Submitted by: rdivacky
Reviewed by: kib
Glanced at by: jhb
(due to an early reset or the like), remember to unlock the socket lock.
This will not occur in 7-CURRENT, but could in theory occur in 6-STABLE.
MFC after: 1 week
do not call markvoldirty() until the mount has been flagged as read-write.
Due to the nature of the msdosfs code, this bug only seemed to appear for
FAT-16 and FAT-32.
This fixes the testcase:
#!/bin/sh
dd if=/dev/zero bs=1m count=1 oseek=119 of=image.msdos
mdconfig -a -t vnode -f image.msdos
newfs_msdos -F 16 /dev/md0 fd120m
mount_msdosfs -o ro /dev/md0 /mnt
mount | grep md0
mount -u -o rw /dev/md0; echo $?
mount | grep md0
umount /mnt
mdconfig -d -u 0
PR: 105412
Tested by: Eugene Grosbein <eugen grosbein pp ru>
revision 1.98 is NOT merged, because FreeBSD does not support this
syntax.
revision 1.99 is NOT merged, "const poisoning" part is not applicable
to FreeBSD. There is no variable shadowing, GCC can't find
this one (but there are others)
revision 1.100 is NOT merged, because it was null patch (no changes)
revision 1.101 is NOT merged, there is no BIT() macro in FreeBSD
revision 1.102 is merged
revision 1.103 is partially merged. There is no ai.ifaceh in FreeBSD
revision 1.104 is NOT merged
revision 1.105 is merged
revision 1.106 is not merged, because of rev. 1.107
revision 1.107 is a backuout of 1.106
Submitted by: Yuriy Tsibizov <Yuriy.Tsibizov@gfk.ru>
---snip---
New features:
1. Optional multichannel recording (32 channels on Live!, 64 channels
on Audigy).
All channels are 16bit/48000Hz/mono, format is fixed.
Half of them are copied from sound output, another half can be
used to record any data from DSP. What should be recorded is
hardcoded in DSP code. In this version it records dummy data, but
can be used to record all DSP inputs, for example..
Because there are no support of more-than-stereo sound streams
multichannell stream is presented as one 32(64)*48000 Hz 16bit mono
stream.
Channel map:
SB Live! (4.0/5.1)
offset (words) substream
0x00 Front L
0x01 Front R
0x02 Digital Front L
0x03 Digital Front R
0x04 Digital Center
0x05 Digital Sub
0x06 Headphones L
0x07 Headphones R
0x08 Rear L
0x09 Rear R
0x0A ADC (multi-rate recording) L
0x0B ADC (multi-rate recording) R
0x0C unused
0x0D unused
0x0E unused
0x0F unused
0x10 Analog Center (Live! 5.1) / dummy (Live! 4.0)
0x11 Analog Sub (Live! 5.1) / dummy (Live! 4.0)
0x12..-0x1F dummy
Audigy / Audigy 2 / Audigy 2 Value / Audigy 4
offset (words) substream
0x00 Digital Front L
0x01 Digital Front R
0x02 Digital Center
0x03 Digital Sub
0x04 Digital Side L (7.1 cards) / Headphones L (5.1 cards)
0x05 Digital Side R (7.1 cards) / Headphones R (5.1 cards)
0x06 Digital Rear L
0x07 Digital Rear R
0x08 Front L
0x09 Front R
0x0A Center
0x0B Sub
0x0C Side L
0x0D Side R
0x0E Rear L
0x0F Rear R
0x10 output to AC97 input L (muted)
0x11 output to AC97 input R (muted)
0x12 unused
0x13 unused
0x14 unused
0x15 unused
0x16 ADC (multi-rate recording) L
0x17 ADC (multi-rate recording) R
0x18 unused
0x19 unused
0x1A unused
0x1B unused
0x1C unused
0x1D unused
0x1E unused
0x1F unused
0x20..0x3F dummy
Fixes:
1. Do not assign negative values to variables used to index emu_cards
array. This array was never accessed when index is negative, but
Alexander (netchild@) told me that Coverity does not like it.
After this change emu_cards[0] should never be used to identify
valid sound card.
2. Fix off-by-one errors in interrupt manager. Add more checks there.
3. Fixes to sound buffering code now allows driver to use large playback
buffers.
4. Fix memory allocation bug when multichannel recording is not
enabled.
5. Fix interrupt timeout when recording with low bitrate (8kHz).
Hardware:
1. Add one more known Audigy ZS card to list. Add two cards with
PCI IDs betwen old known cards and new one.
Other changes:
1. Do not use ALL CAPS in messages.
Incomplete code:
1. Automute S/PDIF when S/PDIF signal is lost.
Tested on i386 only, gcc 3.4.6 & gcc41/gcc42 (syntax only).
---snip---
This commits enables a little bit of debugging output when the driver is
loaded as a module. I did a cross-build test for amd64.
The code has some style issues, this will be addressed later.
The multichannel recording part is some work in progress to allow playing
around with it until the generic sound code is better able to handle
multichannel streams.
This is supposed to fix
CID: 171187
Found by: Coverity Prevent
Submitted by: Yuriy Tsibizov <Yuriy.Tsibizov@gfk.ru>
Bring the linux mmap code more into line with how linux (2.4.x) behaves.
Tested by: Scot Hetzel <swhetzel@gmail.com> on amd64 without PROT_EXEC
Additionally to the i386 version always use PROT_EXEC in the mapping like the
previous version of the amd64 code did. We need to examinate this further to
decide what the right thing to do is. For now this fixes several problems in
the LTP test runs and should behave regarding PROT_EXEC like before.
of max() when computing the divisor in SCHED_TICK_PRI(). This prevents
cases where rounding down would allow the quotient to exceed
SCHED_PRI_RANGE.
- Garbage collect some unused flags and fields.
- Replace TDF_HOLD with sched_pin_td()/sched_unpin_td() since it simply
duplicated this functionality.
- Re-enable the rebalancer by default and fix the sysctl so it can be
modified.
marked idle, thus breaking cpu load balancing.
- Change sched_interact_update() to fix cases where the stored history
has expanded significantly rather than handling them in the callers. This
fixes a case where sched_priority() could compute a bad value.
- Add a sysctl to disable the global load balancer for experimentation.
server.
Don't complain about a hard loop id of 0xffff- we get this in
point-to-point topologies with the 2300 and 2K Login firmware.
Up the timeout on register FC4 types commands.
- Rename confusing AGP_INTEL_I845_MCHCFG to AGP_INTEL_I845_AGPM.
- Move E7205 and E7505 from i8x5 to i8x0 family. It probably worked
because the actual offset is the same.
In fact, all three families have the bit at the exact same place. Only
differences are name and width of the registers, i.e., NBXCFG (0x50, dword),
RDCR (0x51, byte), AGPM (0x51, byte), MCHCFG (0x50, word) depending on
the family of the chipsets.
sysctl and socket teardown by adding a reference count to the UNIX domain
pcb object and fixing the sysctl that enumerates unpcbs to grab a
reference on each unpcb while it builds the list to copy out to userland.
- Close a race between UNIX domain pcb garbage collection (unp_gc()) and
file descriptor teardown (fdrop()) by adding a new garbage collection
flag FWAIT. unp_gc() sets FWAIT while it walks the message buffers
in a UNIX domain socket looking for nested file descriptor references
and clears the flag when it is finished. fdrop() checks to see if the
flag is set on a file descriptor whose refcount just dropped to 0 and
waits for unp_gc() to clear the flag before completely destroying the
file descriptor.
MFC after: 1 week
Reviewed by: rwatson
Submitted by: ups
Hopefully makes the panics go away: mx1
- Add a printf in swp_pager_meta_build() to warn if the swapzone becomes
exhausted so that there's at least a warning before a box that runs out
of swapzone space before running out of swap space deadlocks.
MFC after: 1 week
Reviwed by: alc
functions now more closely resemble similar functions in nullfs.
This also eliminates some errors.
Submitted by: daichi, Masanori OZAWA <ozawa ongs co jp>
setting ftick = ltick = ticks in schedinit().
- Update the priority when we are pulled off of the run queue and when we
are inserted onto the run queue so that it more accurately reflects our
present status. This is important for efficient priority propagation
functioning.
- Move the frequency test into sched_pctcpu_update() so we don't repeat it
each time we'd like to call it.
- Put some temporary work-around code in sched_priority() in case the tick
mechanism produces a bad priority. Eventually this should revert to an
assert again.
a spin mutex since it doesn't have an INTR_FAST interrupt handler.
Beyond that the driver is still under Giant anyway.
- Remove unneeded locking during attach across operations that can't be
called with locks held (such as bus_dma_tag_create()).
MFC after: 1 week
Not objected to by: scottl
the most recently chosen index. This significantly improves nice
behavior. This allows a lower priority thread to run some multiple of
times before the higher priority thread makes it to the front of
the queue. A nice +20 cpu hog now only gets ~5% of the cpu when running
with a nice 0 cpu hog and about 1.5% with a nice -20 hog. A nice
difference of 1 makes a 4% difference in cpu usage between two hogs.
- Track a seperate insert and removal index. When the removal index is
empty it is updated to point at the current insert index.
- Don't remove and re-add a thread to the runq when it is being adjusted
down in priority.
- Pull some conditional code out of sched_tick(). It's looking a bit
large now.
- Remove the double queue mechanism for timeshare threads. It was slow
due to excess cache lines in play, caused suboptimal scheduling behavior
with niced and other non-interactive processes, complicated priority
lending, etc.
- Use a circular queue with a floating starting index for timeshare threads.
Enforces fairness by moving the insertion point closer to threads with
worse priorities over time.
- Give interactive timeshare threads real-time user-space priorities and
place them on the realtime/ithd queue.
- Select non-interactive timeshare thread priorities based on their cpu
utilization over the last 10 seconds combined with the nice value. This
gives us more sane priorities and behavior in a loaded system as
compared to the old method of using the interactivity score. The
interactive score quickly hit a ceiling if threads were non-interactive
and penalized new hog threads.
- Use one slice size for all threads. The slice is not currently
dynamically set to adjust scheduling behavior of different threads.
- Add some new sysctls for scheduling parameters.
Bug fixes/Clean up:
- Fix zeroing of td_sched after initialization in sched_fork_thread() caused
by recent ksegrp removal.
- Fix KSE interactivity issues related to frequent forking and exiting of
kse threads. We simply disable the penalty for thread creation and exit
for kse threads.
- Cleanup the cpu estimator by using tickincr here as well. Keep ticks and
ltick/ftick in the same frequency. Previously ticks were stathz and
others were hz.
- Lots of new and updated comments.
- Many many others.
Tested on: up x86/amd64, 8way amd64.
- runq_add_pri allows the caller to position the thread at any rqindex
regardless of priority.
- runq_choose_from() chooses the lowest priority thread starting from a given
index. The index is updated with the rqindex of the chosen thread. This
routine is used to pick the lowest priority relative to a given index.
- runq_remove_idx() updates the index if the run queue that held the removed
thread is now empty.
start working with third party usb modules, where sometimes it
is not easy to set the inclusion order so that there are no multiple
inclusions, yet you want to compile with high WARNS levels).
I am not sure if there is a standard for having a leading and/or trailing _
in the macro name, the usb code seems to use both.
There are still several unprotected headers here so it might be useful
to do the same thing on other files as well as the need arises.
MFC After: 3 days
check length of the pathname in the range 0<=n<=NFS_MAXPATHLEN,
not 0<n<=NFS_MAXPATHLEN. This fixes a minor interoperability problem
that the FreeBSD NFS server did not allow a symlink pointing the empty
pathname.
MFC after: 1 week
mbuf. First moves toward being able to cope better with having layer 2 (or
other encapsulation data) before the IP header in the packet being examined.
More commits to come to round out this functionality. This commit should
have no practical effect but clears the way for what is coming.
Revirewed by: luigi, yar
MFC After: 2 weeks
been introduced to the MAC framework:
mpo_associate_nfsd_label
mpo_create_mbuf_from_firewall
mpo_check_system_nfsd
mpo_check_vnode_mmap_downgrade
mpo_check_vnode_mprotect
mpo_init_syncache_label
mpo_destroy_syncache_label
mpo_init_syncache_from_inpcb
mpo_create_mbuf_from_syncache
MFC after: 2 weeks [1]
[1] The syncache related entry points will NOT be MFCed as the changes in
the syncache subsystem are not present in RELENG_6 yet.
exclusive access if there is at least one thread waiting for it to
become available. This may significantly reduce overhead by reducing
the number of unnecessary wakeups issued whenever the framework becomes
idle.
Annotate that we still signal the CV more than necessary and should
fix this.
Obtained from: TrustedBSD Project
Reviewed by: csjp
Tested by: csjp
Redo the checking for 2.6 emulation. We now cache the value of
use26 and replace calls to linux_get_osrelease() + parsing with
a call to linux_use26(). Typical path is lockless now.
Pointed out by: kib
This allows to ship RELENG_7_0 with a default osrelease of 2.4.2 and the
possibility to enable 2.6.x emulation without the possible performance
impact of the previous version of the check.
Submitted by: rdivacky
- Micro-optimize the addition of an 802.1q header to match the removal code.
- Consistently check for interfaces being up and running.
- Consistently use NULL instead of 0 with pointers.
With the second (and last) part of my previous Summer of Code work, we get:
-ipfw's in kernel nat
-redirect_* and LSNAT support
General information about nat syntax and some examples are available
in the ipfw (8) man page. The redirect and LSNAT syntax are identical
to natd, so please refer to natd (8) man page.
To enable in kernel nat in rc.conf, two options were added:
o firewall_nat_enable: equivalent to natd_enable
o firewall_nat_interface: equivalent to natd_interface
Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet
to continue being checked by the firewall ruleset after being
(de)aliased.
NOTA BENE: due to some problems with libalias architecture, in kernel
nat won't work with TSO enabled nic, thus you have to disable TSO via
ifconfig (ifconfig foo0 -tso).
Approved by: glebius (mentor)
access plus timers. This makes the code
more portable and able to change out the
mbuf or timer system used more easily ;-)
b) removal of all use of pkt-hdr's until only
the places we need them (before ip_output routines).
c) remove a bunch of code not needed due to <b> aka
worrying about pkthdr's :-)
d) There was one last reorder problem it looks where
if a restart occur's and we release and relock (at
the point where we setup our alias vtag) we would
end up possibly getting the wrong TSN in place. The
code that fixed the TSN's just needed to be shifted
around BEFORE the release of the lock.. also code that
set the state (since this also could contribute).
Approved by: gnn
