d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1f009e2f39
freebsd-nq/sys/dev
History
Pyun YongHyeon 1f009e2f39 Rework link state tracking and TX/RX MAC configuration. 
o Do not report link status if driver is not running.
 o TX/RX MAC configuration should be done with resolved speed,
   duplex and flow control after establishing a link so it can't
   be done in driver initialization routine.
   Move the configuration to miibus_statchg callback which will be
   called whenever any link state change is detected.
   At this moment, flow-control is not enabled yet mainly because
   I was not able to set correct flow control parameters to
   generate TX pause frames.
 o Now TX/RX MAC is enabled only when a valid link is detected.
   Rearragnge hardware initialization routine a bit to leave
   enabling MAC to miibus_statchg callback.  In order to that,
   TX/RX DMA engine is enabled in et_init_locked().
 o Introduce ET_FLAG_LINK flag to track current link state.
 o Introduce ET_FLAG_FASTETHER flag to mark whether controller is
   fast ethernet.  This flag is checked in miibus_statchg callback
   to know whether PHY established a valid link.
 o In et_stop(), TX/RX MAC is explicitly disabled instead of
   relying on et_reset().  And move et_reset() from et_stop() to
   controller initialization.  Controler reset is not required here
   and it would also clear critial registers(i.e station address,
   RX filter configuration, WOL etc) that are required to make WOL
   work.
 o Switching to current media is done in et_init_locked() after
   setting IFF_DRV_RUNNING flag.  This should ensure reliable
   auto-negotiation/manual link establishment.
 o In et_start_locked(), check whether driver got a valid link
   before trying to send frames.
 o Remove checking a link in et_tick() as this is done by
   miibus_statchg callback.
2011-12-07 21:29:51 +00:00
..
aac - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
acpi_support - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
acpica Prevent a division by zero with some broken batteries 2011-11-26 13:43:50 +00:00
adb Add support for special keys (volume/brightness/eject) on Apple laptops with 2011-10-16 21:01:42 +00:00
adlink Remove an unnecessary INTR_MPSAFE and a comment suggesting it was 2011-01-06 21:02:14 +00:00
advansys Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
ae To send a frame, controller requires a prepended TX header and 2011-11-11 19:15:32 +00:00
age Close a race where SIOCGIFMEDIA ioctl get inconsistent link status. 2011-10-17 19:49:00 +00:00
agp Do a sweep of the tree replacing calls to pci_find_extcap() with calls to 2011-03-23 13:10:15 +00:00
aha
ahb
ahci Add hw.ahci.force tunable to control whether AHCI drivers should attach 2011-12-02 12:52:33 +00:00
aic
aic7xxx Improve portability #defines for compiling aicasm on other systems. 2011-07-15 00:36:47 +00:00
alc Close a race where SIOCGIFMEDIA ioctl get inconsistent link status. 2011-10-17 19:49:00 +00:00
ale Close a race where SIOCGIFMEDIA ioctl get inconsistent link status. 2011-10-17 19:49:00 +00:00
amdsbwd amdsbwd: update to support SB8xx southbridges 2011-06-07 06:18:02 +00:00
amdtemp
amr - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
an Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. 2011-11-07 15:43:11 +00:00
arcmsr - Just use cam_calc_geometry(9) on newer version of FreeBSD rather than 2011-11-23 21:43:51 +00:00
asmc
asr Merge from r225950: 2011-10-13 20:06:19 +00:00
ata Add hw.ahci.force tunable to control whether AHCI drivers should attach 2011-12-02 12:52:33 +00:00
ath Re-lock the ath lock after ath_reset() has been called. 2011-11-23 07:12:26 +00:00
atkbdc Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. 2011-11-07 15:43:11 +00:00
auxio
bce - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
bfe - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
bge - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
bktr Remove a few bits of FreeBSD 2.x compatibility code. 2011-11-14 18:21:27 +00:00
bm - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
buslogic Remove some always-true comparisons. 2011-01-18 15:23:16 +00:00
bwi Fix an incorrect use of sizeof(). 2011-10-10 02:54:58 +00:00
bwn s,KOBJMETHOD_END,DEVMETHOD_END,g in order to fully hide the explicit mention 2011-11-22 21:55:40 +00:00
bxe - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
cardbus Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. 2011-11-07 15:43:11 +00:00
cas - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
ce Revert r213793. 2010-10-13 17:38:23 +00:00
cesa - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
cfe Follow up to r225203 refining break-to-debugger run-time configuration 2011-08-27 14:24:27 +00:00
cfi Merge r221614,221696,221737,221840 from largeSMP project branch: 2011-05-22 20:55:54 +00:00
ciss Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs. 2011-11-07 06:44:47 +00:00
cm
cmx
coretemp #PROCHOT assertion is sticky after reading the MSR (accordingly with 2011-09-19 10:58:30 +00:00
cp Revert r213793. 2010-10-13 17:38:23 +00:00
cpuctl
cpufreq
cs Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. 2011-11-07 15:43:11 +00:00
ct
ctau Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
cx
cxgb - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
cxgbe - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
cy
dc Use DEVMETHOD_END. 2011-11-23 20:27:26 +00:00
dcons Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. 2011-11-07 15:43:11 +00:00
de
digi
dpms
dpt
drm Fix display of the drm sysctls. 2011-04-23 23:11:44 +00:00
e1000 add netmap support for "em", "lem", "igb" and "re". 2011-12-05 15:33:13 +00:00
ed Fix off by one error in mbuf access. Previously it caused panic. 2011-12-05 18:10:43 +00:00
eisa - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
en Remove duplicate header includes 2011-06-28 08:36:48 +00:00
ep Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
esp s,KOBJMETHOD_END,DEVMETHOD_END,g in order to fully hide the explicit mention 2011-11-22 21:55:40 +00:00
et Rework link state tracking and TX/RX MAC configuration. 2011-12-07 21:29:51 +00:00
ex
exca
fatm Specify a CTLTYPE_FOO so that a future sysctl(8) change does not need 2011-01-18 21:14:23 +00:00
fb - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
fdc Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. 2011-11-07 15:43:11 +00:00
fdt Fix OF_finddevice error return value in case of FDT. 2011-12-02 15:24:39 +00:00
fe
firewire - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
flash Modify the spi flash driver to allow smaller read IO sizes, but enforce 2011-02-16 20:07:44 +00:00
fxp - Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY 2011-10-08 12:33:10 +00:00
gem - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
glxiic Fix breakage on pc98 by redefining DEBUG(). 2011-05-15 19:04:08 +00:00
glxsb
gpio Modify the GPIO i2c bus code to allow for arbitrary data/clock 2011-12-04 12:10:24 +00:00
hatm
hifn - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
hme - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
hptiop - Just use cam_calc_geometry(9) on newer version of FreeBSD rather than 2011-11-23 21:43:51 +00:00
hptmv - Just use cam_calc_geometry(9) on newer version of FreeBSD rather than 2011-11-23 21:43:51 +00:00
hptrr - Just use cam_calc_geometry(9) on newer version of FreeBSD rather than 2011-11-23 21:43:51 +00:00
hwpmc Update Westmere uncore event exception list. 2011-12-02 10:02:49 +00:00
ic
ichsmb - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
ichwd Fix a bug in ichwd(4) which prevents it from beig enabled if the new 2011-09-02 17:06:50 +00:00
ida - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
ie
ieee488 Implement more of __ibsta: END and SRQI status bits (taken out of the 2010-12-10 22:20:11 +00:00
if_ndis - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
iicbus Allow the i2c node requirements to be slightly relaxed. 2011-12-04 11:55:33 +00:00
iir Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs. 2011-11-07 06:44:47 +00:00
io
ipmi Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. 2011-11-07 15:43:11 +00:00
ips
ipw Add module version to iwi/ipw/wpi and iwn. 2011-05-31 19:08:25 +00:00
iscsi/initiator Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs. 2011-11-07 06:44:47 +00:00
isp Was chasing down a failure to load f/w on a 2400. It turns out that the card 2011-11-16 02:52:24 +00:00
ispfw Update firmware to more recent versions. 2011-01-05 23:15:22 +00:00
iwi Add module version to iwi/ipw/wpi and iwn. 2011-05-31 19:08:25 +00:00
iwn The DC calibration result obtained during initialization can't be 2011-11-21 22:19:12 +00:00
ixgb Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
ixgbe 1. Fix the handling of link reset while in netmap more. 2011-12-05 12:06:53 +00:00
jme - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
joy
kbd Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. 2011-11-07 15:43:11 +00:00
kbdmux Restore binary compatibility for GIO_KEYMAP and PIO_KEYMAP. 2011-07-17 08:19:19 +00:00
ksyms Get rid of D_PSEUDO. 2011-10-18 08:09:44 +00:00
le Make sparc64 compatible with NEW_PCIB and enable it: 2011-10-02 23:22:38 +00:00
led MFgraid/head r218174: 2011-03-24 08:56:12 +00:00
lge - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
lindev
lmc In r191367 the need for if_free_type() was removed and a new member 2011-11-11 22:57:52 +00:00
malo Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. 2011-11-07 15:43:11 +00:00
mc146818
mca - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
mcd
md Add information about MD_READONLY and MD_COMPRESS flags to the 2011-10-31 10:53:27 +00:00
mem Add reader/writer lock around mem_range_attr_get() and mem_range_attr_set(). 2011-01-17 22:58:28 +00:00
mfi - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
mge Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
mii - In mii_attach(9) just set the driver for a newly added miibus(4) instance 2011-12-05 21:38:45 +00:00
mk48txx Add support for MK48T37. 2011-05-15 13:17:08 +00:00
mlx - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
mly Add descriptor sense support to CAM, and honor sense residuals properly in 2011-10-03 20:32:55 +00:00
mmc Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. 2011-11-07 15:43:11 +00:00
mn
mps - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
mpt Increase the IOC port initialization timeouts by ten times to what the 2011-11-01 18:28:33 +00:00
mse
msk - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
mvs Rename device_delete_all_children() into device_delete_children(). 2011-11-22 21:56:55 +00:00
mwl Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. 2011-11-07 15:43:11 +00:00
mxge Update mxge(4) firmware to the latest version available from 2011-07-12 15:07:17 +00:00
my Remove duplicate header includes 2011-06-28 08:36:48 +00:00
ncv
netmap revise the implementation of the rings connected to the host stack 2011-12-05 15:21:21 +00:00
nfe - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
nge - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
nmdm Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs. 2011-11-07 06:44:47 +00:00
nsp
null Move the ZERO_REGION_SIZE to a machine-dependent file, as on many 2011-05-13 19:35:01 +00:00
nve - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
nvram
nvram2env Import nvram2env, a device driver which imports various NVRAM-style 2011-04-03 11:55:48 +00:00
nxge Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
ofw Fix OF_finddevice error return value in case of FDT. 2011-12-02 15:24:39 +00:00
patm Fix a few more SYSCTL_PROC() that were missing a CTLFLAG type specifier. 2011-01-19 00:57:58 +00:00
pbio
pccard Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. 2011-11-07 15:43:11 +00:00
pccbb - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
pcf
pci Add a constant for the Advisory Non-Fatal Error bit in AER corrected error 2011-11-30 18:33:23 +00:00
pcn - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
pdq
powermac_nvram
ppbus Rename device_delete_all_children() into device_delete_children(). 2011-11-22 21:56:55 +00:00
ppc Rename device_delete_all_children() into device_delete_children(). 2011-11-22 21:56:55 +00:00
pst
pty Fix whitespace inconsistencies in the TTY layer and its drivers owned by me. 2011-06-26 18:26:20 +00:00
puc - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
qlxgb The maximum TSO frame size should be: 2011-11-16 02:00:55 +00:00
quicc - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
ral Don't hardcode assumptions about basic rates, similar to what the rt2661 2011-04-09 14:45:50 +00:00
random Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
rc
re add netmap support for "em", "lem", "igb" and "re". 2011-12-05 15:33:13 +00:00
rndtest Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. 2011-11-07 15:43:11 +00:00
rp
rt - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
safe - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
sbni
scc - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
scd
sdhci Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. 2011-11-07 15:43:11 +00:00
sec - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
sf - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
sfxge sfxge: Add $FreeBSD$ tags to common code files. 2011-11-28 17:19:05 +00:00
sge - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
si
siba Rename device_delete_all_children() into device_delete_children(). 2011-11-22 21:56:55 +00:00
siis Rename device_delete_all_children() into device_delete_children(). 2011-11-22 21:56:55 +00:00
sio - add support for Broadcom 802.11bg/EDGE/GPRS CardBus (Serial) 2011-11-15 17:15:09 +00:00
sis - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
sk - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
smbus - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
smc - Import the common MII bitbang'ing code from NetBSD and convert drivers to 2011-11-01 16:13:59 +00:00
sn
snc
snp Second-to-last commit implementing Capsicum capabilities in the FreeBSD 2011-08-11 12:30:23 +00:00
sound - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
speaker
spibus - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
ste - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
stg
stge s,KOBJMETHOD_END,DEVMETHOD_END,g in order to fully hide the explicit mention 2011-11-22 21:55:40 +00:00
streams Add the fo_chown and fo_chmod methods to struct fileops and use them 2011-08-16 20:07:47 +00:00
sym Merge from r225950: 2011-10-07 08:59:54 +00:00
syscons Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. 2011-11-07 15:43:11 +00:00
tdfx Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs. 2011-11-07 06:44:47 +00:00
ti Overhaul bus_dma(9) usage in driver: 2011-11-14 20:38:14 +00:00
tl - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
tpm
trm
tsec - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
twa - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
twe - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
tws - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
tx - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
txp Do a sweep of the tree replacing calls to pci_find_extcap() with calls to 2011-03-23 13:10:15 +00:00
uart Fix OF_finddevice error return value in case of FDT. 2011-12-02 15:24:39 +00:00
ubsec - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
usb Correct some bInterval USB template descriptor values. 2011-12-06 08:08:52 +00:00
utopia
vge - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
virtio Catch up with Bryan Venteicher's virtio Hg repo: 2011-12-06 06:28:32 +00:00
vkbd Get rid of D_PSEUDO. 2011-10-18 08:09:44 +00:00
vr Announce flow control capability to PHY drivers and enable flow 2011-11-28 19:03:59 +00:00
vte Remove unused variable mii. 2011-11-23 05:34:01 +00:00
vx Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
vxge - change "is is" to "is" or "it is" 2011-10-16 14:30:28 +00:00
watchdog - Add the possibility to reuse the already last used timeout when patting 2011-04-27 16:43:03 +00:00
wb - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
wds
wi Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. 2011-11-07 15:43:11 +00:00
wl
wpi Add module version to iwi/ipw/wpi and iwn. 2011-05-31 19:08:25 +00:00
xe Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. 2011-11-07 15:43:11 +00:00
xen - There's no need to overwrite the default device method with the default 2011-11-22 21:28:20 +00:00
xl Use DEVMETHOD_END. 2011-11-23 20:27:26 +00:00