Bill Paul 325931c901 Make pcn_miibus_readreg() latch onto the first PHY that it finds (as ...

a result of mii_phy_probe()) and use that rather than hardcoding a
constant. The hardcoded way was too specific to the particular card
I had and caused PHY probing to fail on at least one laptop with a
built-in AMD chip.

Reported by: rjk@grauel.com (Richard J Kuhns)

2000-09-22 03:49:12 +00:00

..

agp_ali.c

A driver for programming the AGP hardware. This is only very lightly

2000-06-09 16:04:30 +00:00

agp_amd.c

Release resources properly in detach.

2000-06-10 17:53:20 +00:00

agp_i810.c

Add support for Intel's i810 chipset with integrated graphics. An

2000-07-12 10:13:07 +00:00

agp_if.m

A driver for programming the AGP hardware. This is only very lightly

2000-06-09 16:04:30 +00:00

agp_intel.c

A driver for programming the AGP hardware. This is only very lightly

2000-06-09 16:04:30 +00:00

agp_sis.c

A driver for programming the AGP hardware. This is only very lightly

2000-06-09 16:04:30 +00:00

agp_via.c

A driver for programming the AGP hardware. This is only very lightly

2000-06-09 16:04:30 +00:00

agp.c

Add support for Intel's i810 chipset with integrated graphics. An

2000-07-12 10:13:07 +00:00

agppriv.h

Add support for Intel's i810 chipset with integrated graphics. An

2000-07-12 10:13:07 +00:00

agpreg.h

Add support for Intel's i810 chipset with integrated graphics. An

2000-07-12 10:13:07 +00:00

agpvar.h

A driver for programming the AGP hardware. This is only very lightly

2000-06-09 16:04:30 +00:00

alpm.c

Remove ~25 unneeded #include <sys/conf.h>

2000-04-19 14:58:28 +00:00

amd.c

Remove ~25 unneeded #include <sys/conf.h>

2000-04-19 14:58:28 +00:00

amd.h

Back out the previous change to the queue(3) interface.

2000-05-26 02:09:24 +00:00

cy_pci.c

Make LINT compile again.

2000-09-16 18:46:05 +00:00

cy_pcireg.h

$Id$ -> $FreeBSD$

1999-08-28 01:08:13 +00:00

dc21040reg.h

s/Id/FreeBSD/

1999-08-09 12:52:49 +00:00

ide_pcireg.h

$Id$ -> $FreeBSD$

1999-08-28 01:08:13 +00:00

if_ar_p.c

Ahhrggg. Put the test for the compat shims AFTER the file that includes

2000-03-27 20:24:02 +00:00

if_dc.c

If this is a Davicom DM9102A and we're enabling the homePNA link, force

2000-09-20 00:59:17 +00:00

if_dcreg.h

Special-case the LED twiddling code so that it doesn't do anything

2000-09-07 18:51:04 +00:00

if_de.c

Make all Ethernet drivers attach using ether_ifattach() and detach using

2000-07-13 22:54:34 +00:00

if_devar.h

Use bus_space for all register accesses.

2000-05-13 18:47:24 +00:00

if_en_pci.c

Ahhrggg. Put the test for the compat shims AFTER the file that includes

2000-03-27 20:24:02 +00:00

if_fxp.c

Add the PCI device ID for the on-board ethernet controllers on the

2000-09-21 20:01:57 +00:00

if_fxpreg.h

Add the PCI device ID for the on-board ethernet controllers on the

2000-09-21 20:01:57 +00:00

if_fxpvar.h

Removed NetBSD support, which bit-rotted long ago.

2000-09-18 21:12:19 +00:00

if_mn.c

Register resources in a more opportune order for the hardware.

2000-09-05 21:08:48 +00:00

if_pcn.c

Make pcn_miibus_readreg() latch onto the first PHY that it finds (as

2000-09-22 03:49:12 +00:00

if_pcnreg.h

Make pcn_miibus_readreg() latch onto the first PHY that it finds (as

2000-09-22 03:49:12 +00:00

if_rl.c

Make all Ethernet drivers attach using ether_ifattach() and detach using

2000-07-13 22:54:34 +00:00

if_rlreg.h

Make some tweaks to the RealTek driver:

1999-10-21 19:42:03 +00:00

if_sf.c

Close PR# 19904: remember to call sf_setmulti() when initializing the

2000-07-14 19:11:02 +00:00

if_sfreg.h

Modify the Adaptec "starfire" driver to reset the PHY on the MII bus

1999-12-05 20:02:45 +00:00

if_sis.c

Fix up the sis driver, largely to improve the NatSemi DP83815 support:

2000-08-22 23:26:51 +00:00

if_sisreg.h

Fix up the sis driver, largely to improve the NatSemi DP83815 support:

2000-08-22 23:26:51 +00:00

if_sk.c

Replace the mbuf external reference counting code with something

2000-08-19 08:32:59 +00:00

if_skreg.h

Replace the mbuf external reference counting code with something

2000-08-19 08:32:59 +00:00

if_sr_p.c

Ahhrggg. Put the test for the compat shims AFTER the file that includes

2000-03-27 20:24:02 +00:00

if_ste.c

Make all Ethernet drivers attach using ether_ifattach() and detach using

2000-07-13 22:54:34 +00:00

if_stereg.h

Spruce up the Sundance ST201 driver:

1999-12-07 20:14:42 +00:00

if_ti.c

* Completely rewrite the alpha busspace to hide the implementation from

2000-08-28 21:48:13 +00:00

if_tireg.h

Replace the mbuf external reference counting code with something

2000-08-19 08:32:59 +00:00

if_tl.c

Make all Ethernet drivers attach using ether_ifattach() and detach using

2000-07-13 22:54:34 +00:00

if_tlreg.h

Make some small performance tweaks to the tl driver. This should hopefully

1999-09-19 22:39:24 +00:00

if_tx.c

Make all Ethernet drivers attach using ether_ifattach() and detach using

2000-07-13 22:54:34 +00:00

if_txvar.h

Added support for SMC9432BTX cards.

2000-06-21 19:19:49 +00:00

if_vr.c

Make all Ethernet drivers attach using ether_ifattach() and detach using

2000-07-13 22:54:34 +00:00

if_vrreg.h

Close PR# 19617: add support for VIA VT6102 NICs to VIA Rhine driver.

2000-07-05 21:37:21 +00:00

if_wb.c

Replace the mbuf external reference counting code with something

2000-08-19 08:32:59 +00:00

if_wbreg.h

Convert the Adaptec and Winbond drivers to miibus.

1999-08-30 23:08:32 +00:00

if_wx.c

Make all Ethernet drivers attach using ether_ifattach() and detach using

2000-07-13 22:54:34 +00:00

if_wxreg.h

Fix this driver to (finally) work with switches. Some more black

2000-06-16 06:28:31 +00:00

if_wxvar.h

Fix this driver to (finally) work with switches. Some more black

2000-06-16 06:28:31 +00:00

if_xl.c

Add support for the 3Com 556 and 556B mini-pci adapters used on some

2000-08-28 20:40:03 +00:00

if_xlreg.h

Add support for the 3Com 556 and 556B mini-pci adapters used on some

2000-08-28 20:40:03 +00:00

intpm.c

Fix some leakage from inside #ifdef PCI_COMPAT (the FreeBSD 2.2 compat

2000-05-28 16:17:18 +00:00

intpmreg.h

$Id$ -> $FreeBSD$

1999-08-28 01:08:13 +00:00

isp_pci.c

some copyright cleanups

2000-09-21 20:16:04 +00:00

locate.pl

use warnings

2000-06-27 22:41:12 +00:00

meteor_reg.h

Add $FreeBSD$

2000-05-01 20:32:07 +00:00

meteor.c

Ahhrggg. Put the test for the compat shims AFTER the file that includes

2000-03-27 20:24:02 +00:00

ncr.c

ncr.c is no longer a COMPAT_OLDPCI device - remove the warning.

2000-05-28 10:45:06 +00:00

ncrreg.h

$Id$ -> $FreeBSD$

1999-08-28 01:08:13 +00:00

ohci_pci.c

Only display the 'Disable PNP-OS BIOS option' message on the i386 arch.

2000-05-11 20:17:28 +00:00

pccbb.c

Initial import of cardbus bridge driver (cbb) from the latest

1999-11-18 07:14:54 +00:00

pccbbreg.h

Initial import of cardbus bridge driver (cbb) from the latest

1999-11-18 07:14:54 +00:00

pccbbvar.h

Initial import of cardbus bridge driver (cbb) from the latest

1999-11-18 07:14:54 +00:00

pci_compat.c

- Remove the inthand2_t type and use the equivalent driver_intr_t type from

2000-09-13 18:33:25 +00:00

pci_if.m

* Factor out the object system from new-bus so that it can be used by

2000-04-08 14:17:18 +00:00

pci.c

When dumping the 'found devices' list in verbose mode, actually show the

2000-09-05 00:32:19 +00:00

pcib_if.m

* Completely rewrite the alpha busspace to hide the implementation from

2000-08-28 21:48:13 +00:00

pcic_p.c

Add a detach method to allow this device to be unloaded.

2000-08-30 06:57:38 +00:00

pcic_p.h

Add TI-1031 id. It doesn't work yet, but it is nice to have it.

2000-08-29 04:40:17 +00:00

pcireg.h

Add PCIM_CMD_MWRICEN, the bit in the command register in PCI space

2000-09-16 20:06:13 +00:00

pcisupport.c

Clean up the VIA id's a bit and add the K[TX]133 chipsets

2000-09-20 07:05:44 +00:00

pcivar.h

* Completely rewrite the alpha busspace to hide the implementation from

2000-08-28 21:48:13 +00:00

scsiiom.c

Add $FreeBSD$

2000-05-01 20:32:07 +00:00

simos.c

Separate the struct bio related stuff out of <sys/buf.h> into

2000-05-05 09:59:14 +00:00

simos.h

$Id$ -> $FreeBSD$

1999-08-28 01:08:13 +00:00

ti_fw2.h

Use a custom Tigon 2 firmware image, hopefully temporarily. This is

2000-07-26 23:55:34 +00:00

ti_fw.h

Update the Tigon driver to support 1000baseTX gigE over copper AceNIC

2000-07-20 22:24:43 +00:00

uhci_pci.c

Add 440MX chipset.

2000-05-24 02:24:38 +00:00

xmaciireg.h

Reoganize/update the SysKonnect driver:

2000-04-22 02:16:41 +00:00

xrpu.c

Do not depend on FreeBSD 2.2 compatability defines.

2000-05-28 16:18:58 +00:00