d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
freebsd-nq/sys/dev
History
John Baldwin 7d23a9b3d5 - Retire acpi_pcib_resume(). It is has just been an alias for 
bus_generic_resume() since the pci_link(4) driver was added.
- Change the ACPI PCI-PCI bridge driver to inherit most of its methods
  from the generic PCI-PCI bridge driver.  In particular, this will now
  restore PCI config registers for ACPI PCI-PCI bridges.

Tested by:	Oleg Sharoyko  osharoiko of gmail
2010-08-05 16:10:12 +00:00
..
aac
Use enums in the aac_command_status_table rather than duplicating the same
2010-04-13 12:10:55 +00:00
acpi_support
Remove the acpi_aiboost driver. It has been replaced by aibs(4).
2010-07-25 17:55:57 +00:00
acpica
- Retire acpi_pcib_resume(). It is has just been an alias for
2010-08-05 16:10:12 +00:00
adb
…
adlink
…
advansys
…
ae
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
age
With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify
2010-04-19 22:10:40 +00:00
agp
Do not mention VM_ALLOC_RETRY in comment, and normalize the terminology
2010-07-08 08:39:02 +00:00
aha
…
ahb
…
ahci
Export PCI IDs of ATA/SATA controllers through CAM and ata(4) layers to
2010-07-25 15:43:52 +00:00
aic
…
aic7xxx
Correct logic bug in aicasm's undefined register bit access detection code.
2010-07-14 14:31:18 +00:00
alc
With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify
2010-04-19 22:10:40 +00:00
ale
It seems ale(4) controllers do not like to see TCP payload in the
2010-04-26 21:08:15 +00:00
amd
…
amdsbwd
amdsbwd: fix nonsensical timeout calculations
2010-05-31 09:07:23 +00:00
amdtemp
…
amr
Fix clang warning on empty statement.
2010-07-28 16:24:11 +00:00
an
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
arcmsr
Apply vendor version 1.20.00.17.
2010-07-21 18:50:24 +00:00
asmc
…
asr
MFp4: Large set of CAM inprovements.
2010-01-28 08:41:30 +00:00
ata
Export PCI IDs of ATA/SATA controllers through CAM and ata(4) layers to
2010-07-25 15:43:52 +00:00
ath
Extend the ath debugging a little to log the interface name.
2010-07-08 14:08:03 +00:00
atkbdc
On certain chipsets AT keyboard controller isn't present and is
2010-04-29 06:16:00 +00:00
auxio
…
bce
Fix an apparent typo.
2010-07-26 23:24:42 +00:00
bfe
…
bge
Use Miscellaneous Configuration Register bit definition instead of
2010-07-15 23:34:58 +00:00
bktr
Fix build on architectures where PAGE_SIZE is a long (sparc64, powerpc).
2010-07-13 19:27:20 +00:00
bm
…
buslogic
…
bwi
Fixes a page fault in bwi_pci_probe() because the array isn't terminated
2010-07-10 22:37:23 +00:00
bwn
Fixes a mistake to calculate CALC_COEFF2() value that tmp[3] is
2010-07-22 20:08:02 +00:00
cardbus
…
cas
KTR_CTx are long time aliased by existing classes so they can't serve
2010-07-21 10:05:07 +00:00
ce
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cfe
Create the "cfecons" tty directly using tty_makedev(). It is not clear what
2010-01-26 03:42:34 +00:00
cfi
Convert Freescale PowerPC platforms to FDT convention.
2010-07-11 21:08:29 +00:00
ciss
Initialize the callout structure earlier in attach before calling any
2010-04-28 18:49:45 +00:00
cm
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cmx
…
coretemp
Catch known CPUs before using IA32_TEMPERATURE_TARGET.
2010-08-04 00:25:13 +00:00
cp
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cpuctl
…
cpufreq
…
cs
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ct
…
ctau
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cx
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cxgb
- Change the warning about PCI-e links narrower than x8 to only apply to
2010-07-26 17:31:15 +00:00
cy
…
dc
…
dcons
…
de
…
digi
…
dpms
…
dpt
…
drm
Add support for ATI Radeon HD 4250.
2010-08-03 16:30:56 +00:00
e1000
Fix clang warning on empty statement.
2010-07-28 16:24:06 +00:00
ed
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
eisa
…
en
…
ep
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
esp
Include <machine/ofw_machdep.h> for OF_getscsinitid().
2010-05-10 20:02:39 +00:00
et
Change copyright holder to author. We prefer using a real legal
2010-07-30 17:51:22 +00:00
ex
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
exca
…
fatm
…
fb
Initialize a variable before its use.
2010-07-13 19:58:06 +00:00
fdc
Fix a regression from r200554, which broke fdc(4) attachment to acpi(4).
2010-05-30 03:45:41 +00:00
fdt
Eliminate FDT_IMMR_VA define.
2010-07-19 18:47:18 +00:00
fe
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
firewire
Cast a bus_size_t to a (size_t) to use %zd specifier. Not quite the
2010-03-29 17:24:23 +00:00
flash
Fix naming to be consistent.
2010-07-19 21:50:43 +00:00
fxp
If controller received bad frames make sure to update newly added
2010-05-14 17:39:28 +00:00
gem
KTR_CTx are long time aliased by existing classes so they can't serve
2010-07-21 10:05:07 +00:00
glxsb
…
hatm
…
hifn
…
hme
KTR_CTx are long time aliased by existing classes so they can't serve
2010-07-21 10:05:07 +00:00
hptiop
Report transport type in XPT_PATH_INQ.
2010-06-19 13:41:17 +00:00
hptmv
Report transport type in XPT_PATH_INQ.
2010-06-19 13:42:14 +00:00
hptrr
MFp4: Large set of CAM inprovements.
2010-01-28 08:41:30 +00:00
hwpmc
Make sure that we clear the correct bits when we turn off
2010-07-29 17:52:23 +00:00
ic
…
ichsmb
…
ichwd
ichwd: correct range check for timeout value
2010-07-24 19:40:16 +00:00
ida
…
ie
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ieee488
GPIB overhaul, part #2: make the tnt4882 driver work with the newer
2010-02-01 21:21:10 +00:00
if_ndis
…
iicbus
Fix iicbus_get_addr() on 64-bit big-endian systems. The bus accessor
2010-07-08 14:19:52 +00:00
iir
…
io
- Extract the IODEV_PIO interface from ia64 and make it MI.
2010-04-28 15:38:01 +00:00
ipmi
Fix test for double-nul characters that terminate the string table at
2010-07-29 13:46:37 +00:00
ips
…
ipw
Enable 5.5 and 11Mbit TX rates.
2010-05-11 17:14:17 +00:00
iscsi/initiator
…
isp
Don't pass a buffer directly as a printflike format string.
2010-06-10 19:38:07 +00:00
ispfw
Don't spam dmesg with "registered firmware ..." when module is compiled
2010-03-05 03:37:42 +00:00
iwi
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
iwn
Handle RUN->ASSOC->RUN transition correctly, as in not trigger a
2010-07-15 11:52:20 +00:00
ixgb
…
ixgbe
Fix build
2010-07-01 05:03:24 +00:00
jme
Add TSO support on VLANs. jme(4) controllers do not require VLAN
2010-02-22 22:05:49 +00:00
joy
…
kbd
…
kbdmux
…
ksyms
…
le
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
led
…
lge
…
lindev
…
lmc
…
malo
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
mc146818
…
mca
…
mcd
…
md
- Remove some extra white space.
2010-07-26 10:37:14 +00:00
mem
…
mfi
Correct mfip module dependency on mfi. This allows mfip to be loaded as
2010-03-02 17:34:11 +00:00
mge
Convert Marvell ARM platforms to FDT convention.
2010-06-13 13:28:53 +00:00
mii
Add Marvell PHYG65G Gigabit PHY which is found on 88E8059 Yukon Optima.
2010-04-30 19:01:55 +00:00
mk48txx
…
mlx
…
mly
MFp4: Large set of CAM inprovements.
2010-01-28 08:41:30 +00:00
mmc
Report relative card address to NewBus as location string.
2010-05-23 09:44:48 +00:00
mn
…
mpt
Correct inverted parent DMA tag parameters.
2010-07-12 23:01:21 +00:00
mse
…
msk
When VLAN hardware tagging is disabled, make sure to disable VLAN
2010-05-04 22:24:19 +00:00
mvs
Export PCI IDs of ATA/SATA controllers through CAM and ata(4) layers to
2010-07-25 15:43:52 +00:00
mwl
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
mxge
Add interrupt descriptions for mxge's msi-x vectors
2010-05-21 15:57:24 +00:00
my
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ncv
…
nfe
With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify
2010-04-19 22:10:40 +00:00
nge
…
nmdm
…
nsp
…
null
…
nve
Initialize the ifnet before calling mii_phy_probe() as some phy drivers
2010-01-27 14:43:28 +00:00
nvram
…
nxge
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ofw
Missed a file in r209803: this header contains a definition of
2010-07-08 18:15:06 +00:00
patm
…
pbio
…
pccard
…
pccbb
…
pcf
…
pci
- Retire acpi_pcib_resume(). It is has just been an alias for
2010-08-05 16:10:12 +00:00
pcn
…
pdq
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
powermac_nvram
…
ppbus
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ppc
Add PCI ID for MCS9901's parallel port.
2010-03-23 20:08:18 +00:00
pst
…
pty
…
puc
Add support for the Perle Speed4 LE.
2010-05-20 13:16:42 +00:00
quicc
Convert Freescale PowerPC platforms to FDT convention.
2010-07-11 21:08:29 +00:00
ral
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
random
Use the fpu_kern_enter() interface to properly separate usermode FPU
2010-06-05 16:00:53 +00:00
rc
…
re
Don't change PCIe maximum read request size to 2048 on RTL810x
2010-05-07 23:05:27 +00:00
rndtest
…
rp
…
safe
…
sbni
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
scc
…
scd
…
sdhci
…
sec
Convert Freescale PowerPC platforms to FDT convention.
2010-07-11 21:08:29 +00:00
sf
…
sge
Remove enabling RX checksum offloading in RX filter setup. RX
2010-07-08 18:22:49 +00:00
si
…
siba
Revert r204992 and just wrap it all in ifdef INVARIANTS to fix the debug and
2010-03-11 08:03:56 +00:00
siis
Export PCI IDs of ATA/SATA controllers through CAM and ata(4) layers to
2010-07-25 15:43:52 +00:00
sio
…
sis
It's not necessary to reset the chip every time an input overflow event
2010-04-20 19:30:12 +00:00
sk
Some revision of Yukon controller generates corrupted frame when TX
2010-07-09 21:21:08 +00:00
smbus
…
smc
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
sn
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
snc
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
snp
…
sound
Do not free sc if attach failed, as it was allocated by the bus
2010-08-04 07:49:40 +00:00
speaker
…
spibus
…
ste
…
stg
…
stge
The NetBSD Foundation has granted permission to remove clause 3 and 4 from
2010-03-01 16:52:11 +00:00
streams
…
sym
- On sparc64 obtain the initiator ID from the Open Firmware device tree
2010-04-27 18:05:33 +00:00
syscons
Improve style slightly.
2010-07-19 20:31:04 +00:00
tdfx
…
ti
Neither the page lock nor the page queues lock is required to unwire and
2010-05-03 15:51:59 +00:00
tl
…
trm
MFp4: Large set of CAM inprovements.
2010-01-28 08:41:30 +00:00
tsec
Convert Freescale PowerPC platforms to FDT convention.
2010-07-11 21:08:29 +00:00
twa
Don't use pack() for structures that is used purely for software state.
2010-07-09 17:38:15 +00:00
twe
…
tx
…
txp
…
uart
Eliminate FDT_IMMR_VA define.
2010-07-19 18:47:18 +00:00
ubsec
Cast the bus_size_t to a intmax_t rather than assuming type-punning to
2010-03-29 17:26:24 +00:00
usb
Add quirk for Apacer HT202 USB 2.0 Flash Drive.
2010-07-28 18:56:01 +00:00
utopia
…
vge
…
vkbd
…
vr
…
vx
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
watchdog
…
wb
…
wds
…
wi
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
wl
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
wpi
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
xe
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
xen
A number of netfront fixes and stability improvements:
2010-06-08 03:13:26 +00:00
xl
…