Warner Losh 3f0fd37320 Make USB work on the KB9202{,A,B} boards. This has been in p4 for about ... 7 months. You must have JP6 in the 1-2 position to supply power to the USB devices, but I've used uftdi, uplcom and umass successfully. If you have it in 2-3, then nothing will show up. Also, if you have the FQPA packaging for the AT91RM9200 (like the KN9202 boards have), you will get the following message uhub0: device problem (IOERROR), disabling port 2 due to a hardware erratum. It is safe to ignore as it is about pins that aren't brought out on the FQPA package and aren't proeprly terminated either. Alas, there's no register to read to tell the FQPA from the BGA versions. Submitted by: Daan Vreeken Approved by: re (kensmith)		2007-07-31 17:43:18 +00:00
..
at91_mci.c	o break newbus api: add a new argument of type driver_filter_t to	2007-02-23 12:19:07 +00:00
at91_mcireg.h	MMC/SD bridge driver (host adapter) for AT91RM9200's MCI interface.	2006-10-20 06:44:04 +00:00
at91_pdcreg.h	Get this to compile :	2006-05-11 14:30:28 +00:00
at91_pio_rm9200.h	Add support for configuring pins to be one of {GPIO, PERIPHERAL A or	2006-07-02 03:50:44 +00:00
at91_pio.c	o break newbus api: add a new argument of type driver_filter_t to	2007-02-23 12:19:07 +00:00
at91_pioreg.h	Merge from FreeBSD-tsf-6 by way of p4:	2007-01-01 00:46:54 +00:00
at91_piovar.h	MFp4:	2006-07-14 22:22:57 +00:00
at91_pmc.c	MFp4: BWCT boards are using an 16MHz xtal	2007-01-05 01:14:14 +00:00
at91_pmcreg.h	Add the sekelton of support for the Power Management Controller.	2006-03-24 07:37:56 +00:00
at91_pmcvar.h	Add the sekelton of support for the Power Management Controller.	2006-03-24 07:37:56 +00:00
at91_rtc.c	Correct return code (int) for at91_rtc_intr() prototype.	2007-02-27 13:39:34 +00:00
at91_rtcreg.h	MFp4:	2006-07-14 22:06:01 +00:00
at91_spi.c	Use tsleep() rather than msleep() with a NULL mtx.	2007-02-27 17:15:39 +00:00
at91_spireg.h	MFp4: Fix bit name for SPI SR register	2007-01-01 00:50:25 +00:00
at91_ssc.c	o break newbus api: add a new argument of type driver_filter_t to	2007-02-23 12:19:07 +00:00
at91_sscreg.h	MFp4: Status register bits	2006-10-25 07:58:18 +00:00
at91_st.c	Revisit the watchdogs: Resetting the error to EINVAL after failing to set the	2007-03-27 21:03:37 +00:00
at91_streg.h
at91_twi.c	MFp4: A bunch of patches from myself and Tisco to improve the	2007-03-23 22:57:24 +00:00
at91_twiio.h
at91_twireg.h	MFp4: A bunch of patches from myself and Tisco to improve the	2007-03-23 22:57:24 +00:00
at91_usartreg.h	Remove unused bit definitions.	2006-04-06 04:29:24 +00:00
at91.c	o substitute INTR_FAST with FILTER in a panic message.	2007-03-06 10:55:57 +00:00
at91rm92reg.h	Make USB work on the KB9202{,A,B} boards. This has been in p4 for about	2007-07-31 17:43:18 +00:00
at91var.h
files.at91	MFp4: Make at91_rtc optional to allow other RTC choices	2007-01-05 02:06:53 +00:00
files.kb920x
hints.at91rm9200
hints.at91sam9261
if_ate.c	Fix a spacing nit.	2007-06-11 19:36:37 +00:00
if_atereg.h	MFp4: berndt pointed me at an errata that shows that the stat register	2006-09-07 21:50:01 +00:00
kb920x_machdep.c	Make USB work on the KB9202{,A,B} boards. This has been in p4 for about	2007-07-31 17:43:18 +00:00
ohci_atmelarm.c	Make USB work on the KB9202{,A,B} boards. This has been in p4 for about	2007-07-31 17:43:18 +00:00
std.at91	MFp4: Move the parameters that are basically dictated by the AT91	2006-10-25 08:00:11 +00:00
std.kb920x	MFp4: Move the parameters that are basically dictated by the AT91	2006-10-25 08:00:11 +00:00
uart_bus_at91usart.c	Resurrect Skyeye support :	2006-05-13 23:41:16 +00:00
uart_cpu_at91rm9200usart.c	Revert to the previous version where the return value of uart_getenv()	2007-06-04 17:53:42 +00:00
uart_dev_at91usart.c	Don't expose the uart_ops structure directly, but instead have	2007-04-02 22:00:22 +00:00