Warner Losh 6f4f8f233c Set the SoC name for the atmelbus name.		2013-12-30 18:10:04 +00:00
..
at91_aicreg.h
at91_cfata.c
at91_machdep.c	Although not strictly required to boot a 64MB board, bump	2013-12-06 18:41:16 +00:00
at91_mci.c	Remove #include <machine/frame.h> from all the arm code that doesn't	2013-10-27 01:34:10 +00:00
at91_mcireg.h
at91_pdcreg.h
at91_pio_sam9g20.h
at91_pio_sam9g45.h	Add support for the Atmel AT91SAM9G45 CPU.	2012-07-26 08:01:25 +00:00
at91_pio.c	Fix regression issue after r248910.	2013-04-07 13:03:57 +00:00
at91_pioreg.h	Add definitions for the additional PIO pins found on recent AT91 SoCs.	2013-12-02 02:33:03 +00:00
at91_piovar.h	Fix regression issue after r248910.	2013-04-07 13:03:57 +00:00
at91_pit.c	at91pit->at91_pit for consistnecy with other drivers.	2012-07-11 17:11:54 +00:00
at91_pitreg.h	at91pit->at91_pit for consistnecy with other drivers.	2012-07-11 17:11:54 +00:00
at91_pmc.c	Remove #include <machine/frame.h> from all the arm code that doesn't	2013-10-27 01:34:10 +00:00
at91_pmcreg.h	Add charge pump current register.	2012-08-10 04:47:20 +00:00
at91_pmcvar.h	Correct the PLLA setting functions and centralize.	2012-08-11 05:45:19 +00:00
at91_reset.S
at91_rst.c	at91$DEV->at91_$DEV to match other Atmel drivers. Also, export	2012-07-11 17:11:07 +00:00
at91_rstreg.h	at91$DEV->at91_$DEV to match other Atmel drivers. Also, export	2012-07-11 17:11:07 +00:00
at91_rtc.c	Loop reading the RTC registers until the same values are obtained	2012-10-07 20:36:46 +00:00
at91_rtcreg.h	Use the RTC unit to get the time. This works on all known AT91SAM9*	2012-10-07 01:58:32 +00:00
at91_spi.c	Fetch the chip select in the bridge driver, like all the other spi	2012-08-23 22:38:37 +00:00
at91_spireg.h
at91_ssc.c
at91_sscreg.h
at91_st.c	Make the SoC stuff a little more modular, and start to move away from	2012-07-11 20:17:14 +00:00
at91_streg.h	Make the SoC stuff a little more modular, and start to move away from	2012-07-11 20:17:14 +00:00
at91_twi.c
at91_twiio.h
at91_twireg.h
at91_usartreg.h
at91_wdt.c
at91_wdtreg.h
at91.c	Set the SoC name for the atmelbus name.	2013-12-30 18:10:04 +00:00
at91board.h
at91reg.h
at91rm92reg.h
at91rm9200_devices.c	Fix a typo: the RXD0 pin is PA18, not PA19.	2013-03-29 18:06:54 +00:00
at91rm9200.c	Fix a typo in the CF device driver name that prevented instantiation.	2013-03-31 12:51:56 +00:00
at91rm9200var.h	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
at91sam9g20.c	Correct the PLLA setting functions and centralize.	2012-08-11 05:45:19 +00:00
at91sam9g20reg.h
at91sam9g45.c	Correct the PLLA setting functions and centralize.	2012-08-11 05:45:19 +00:00
at91sam9g45reg.h	Add support for the Atmel AT91SAM9G45 CPU.	2012-07-26 08:01:25 +00:00
at91sam9x5.c	Correct the PLLA setting functions and centralize.	2012-08-11 05:45:19 +00:00
at91sam9x5reg.h	These files will support the whole at91sam9x5 family when done,	2012-07-30 21:30:43 +00:00
at91sam9260.c	Update comments about setting PLLA and refernce the tables in the	2012-08-11 05:12:46 +00:00
at91sam9260reg.h
at91soc.c	Make the SoC stuff a little more modular, and start to move away from	2012-07-11 20:17:14 +00:00
at91soc.h	Make the SoC stuff a little more modular, and start to move away from	2012-07-11 20:17:14 +00:00
at91var.h	Remember where we found the DBGU and use that for our console.	2012-07-12 19:11:37 +00:00
board_bwct.c	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
board_eb9200.c	Preliminary Embest ATEB9200 support.	2012-08-16 05:03:59 +00:00
board_ethernut5.c	uboot should be telling us it is an ETHERNUT5 for this board. Tag it	2012-07-14 06:00:37 +00:00
board_hl200.c	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
board_hl201.c
board_kb920x.c	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
board_qila9g20.c
board_sam9g20ek.c
board_sam9x25ek.c
board_sam9260ek.c	Turns out the ETHERNUT5 isn't anything like the SAM9260-EK. Make this	2012-07-27 05:33:55 +00:00
board_sn9g45.c	Add new at91sam9g45 support and sn9g45 board to the ATMEL kernel.	2012-07-27 16:38:02 +00:00
board_tsc4370.c	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
files.at91	Add a nand flash controller driver for Atmel at91 family. Tested only	2013-12-02 03:52:40 +00:00
if_ate.c	Loose -> Lose so this sentence makes sense.	2013-12-11 15:32:28 +00:00
if_atereg.h
if_macb.c	Mechanically substitute flags from historic mbuf allocator with	2012-12-05 08:04:20 +00:00
if_macbreg.h
if_macbvar.h	Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this	2013-11-30 22:17:27 +00:00
std.at91	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.at91sam9	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.at91sam9g45	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.atmel	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.bwct
std.eb9200	Preliminary Embest ATEB9200 support.	2012-08-16 05:03:59 +00:00
std.ethernut5
std.hl200
std.hl201
std.kb920x
std.qila9g20
std.sam9g20ek
std.sam9x25ek	These files will support the whole at91sam9x5 family when done,	2012-07-30 21:30:43 +00:00
std.sam9260ek	Add preliminary support for Atmel SAM9260-EK evaluation kit.	2012-07-14 06:13:23 +00:00
std.sn9g45	Add support for the DesignA Electronics Snapper9g45 System on Module.	2012-07-26 08:05:28 +00:00
std.tsc4370
uart_bus_at91usart.c	Some models have 6 USARTS + DBGU. Set a consistent name.	2012-07-26 05:46:56 +00:00
uart_cpu_at91usart.c	This file is no longer AT91RM9200 specific, but now is generic to all	2012-07-12 19:15:38 +00:00
uart_dev_at91usart.c	Plumb the cn_grab and cn_ungrab routines down into the uart	2013-12-21 16:23:31 +00:00