freebsd-nq

a10

Stop including fdt_common.h from the arm code when it's unneeded.

2016-11-14 11:41:22 +00:00

a13

Add support for Allwinner A13.

2016-07-08 23:38:25 +00:00

a20

Stop including fdt_common.h from the arm code when it's unneeded.

2016-11-14 11:41:22 +00:00

a31

Remove the old Allwinner std.* files, these are not part of the common

2016-10-03 16:47:46 +00:00

a64

Add Allwinner A64 padconf settings.

2016-07-11 20:06:21 +00:00

a83t

Remove the old Allwinner std.* files, these are not part of the common

2016-10-03 16:47:46 +00:00

clk

PLL3 have a fractional mode where an explicit frequency (297Mhz or 270)

2016-11-26 10:36:48 +00:00

h3

Remove the old Allwinner std.* files, these are not part of the common

2016-10-03 16:47:46 +00:00

a10_ahci.c

ALLWINNER: ahci_devclass is local variable, don't export it.

2016-09-30 05:30:16 +00:00

a10_codec.c

Add support for Allwinner H3 audio codec.

2016-11-03 23:22:04 +00:00

a10_dmac.c

Register the device's xref handle at attach time.

2016-11-02 23:53:47 +00:00

a10_dmac.h

Add support for the Allwinner DMA controller. This will be used by the at

2016-02-15 19:56:35 +00:00

a10_ehci.c

Do not attempt to disable/release clock if it had not been enabled.

2016-11-23 01:44:28 +00:00

a10_fb.c

EXTRES: Add OF node as argument to all <foo>_get_by_ofw_<bar>() functions.

2016-07-10 18:28:15 +00:00

a10_gpio.c

Move including fdt_pinctrl.h after openfirm.h to get th edefinition of

2016-11-14 11:52:22 +00:00

a10_gpio.h

Rename a10_emac_gpio_config() to a10_gpio_ethernet_activate() to make the

2015-07-03 17:54:41 +00:00

a10_hdmi.c

Enable the SCL and SDA i2c line for DDC.

2016-11-24 01:24:26 +00:00

a10_hdmiaudio.c

Add Allwinner A20 HDMI support.

2016-02-25 20:17:18 +00:00

a10_mmc.c

On command error, reset only DMA and FIFO engines instead of the entire

2016-11-15 23:48:30 +00:00

a10_mmc.h

a10_mmc: Remove completly the PIO code now all access is done by DMA.

2016-09-10 17:45:35 +00:00

a10_sramc.c

Stop including fdt_common.h from the arm code when it's unneeded.

2016-11-14 11:41:22 +00:00

a10_sramc.h

Add function for mapping SRAM-D area to USB0 (OTG) controller. Use a lower

2016-04-08 10:54:59 +00:00

a31_dmac.c

Add support for the integrated DMA controller found in the Allwinner A31,

2016-11-02 23:58:10 +00:00

allwinner_pinctrl.h

Move the Allwinner kernels to use fdt_pinctrl. This will read the pin

2016-02-17 18:28:03 +00:00

aw_ccu.c

Stop including fdt_common.h from the arm code when it's unneeded.

2016-11-14 11:41:22 +00:00

aw_cir.c

Stop including fdt_common.h from the arm code when it's unneeded.

2016-11-14 11:41:22 +00:00

aw_if_dwc.c

Rename allwinner_machdep.{c.h} to aw_machdep.{c.h} as all allwinner source

2016-08-17 21:44:02 +00:00

aw_machdep.c

Use the platform_*_t typedefs to help check the platform function types are

2016-12-13 13:46:09 +00:00

aw_machdep.h

Rename allwinner_machdep.{c.h} to aw_machdep.{c.h} as all allwinner source

2016-08-17 21:44:02 +00:00

aw_mp.c

ARM: SEV/WFE instructions are implemented starting from ARMv6K,

2016-10-06 13:18:18 +00:00

aw_mp.h

Merge a20_mp_start_ap and a31_mp_start_ap into one function.

2016-05-10 18:00:37 +00:00

aw_nmi.c

Stop including fdt_common.h from the arm code when it's unneeded.

2016-11-14 11:41:22 +00:00

aw_reset.c

Attach hwreset resources at the same time as clock resources.

2016-04-08 23:07:16 +00:00

aw_rsb.c

allwinner: Add support for P2WI in RSB driver

2016-10-24 20:33:42 +00:00

aw_rtc.c

Remove dependency on allwinner_soc_family() as it is not available on arm64.

2016-08-25 10:14:56 +00:00

aw_sid.c

Add support for reading root key on A83T/A64.

2016-09-03 15:22:50 +00:00

aw_sid.h

Add support for the SID (Security ID Module) on Allwinner A10 and A20.

2016-07-20 11:23:06 +00:00

aw_thermal.c

On H3, initialize alarm and shutdown trip points and do temperature

2016-11-19 14:56:22 +00:00

aw_ts.c

Stop including fdt_common.h from the arm code when it's unneeded.

2016-11-14 11:41:22 +00:00

aw_usbphy.c

Add support for Allwinner A64 USB PHY.

2016-08-31 10:45:53 +00:00

aw_wdog.c

Add the missing void to function signatures in much of the arm code.

2016-12-13 13:43:22 +00:00

aw_wdog.h

Add support for the Allwinner A31 watchdog to the existing A10 watchdog

2016-02-25 16:50:36 +00:00

axp81x.c

Attach later so axp81x attaches after aw_nmi.

2016-09-07 01:09:25 +00:00

axp209.c

Add support for AXP221 Power Management Unit.

2016-11-04 20:02:52 +00:00

axp209reg.h

Add support for AXP221 Power Management Unit.

2016-11-04 20:02:52 +00:00

console.c

Switch to my freebsd.org emal address in copyright.

2014-03-25 08:31:47 +00:00

files.allwinner

Start to remove the old pre-INTRNG code from the arm platforms. These have

2016-11-08 12:15:57 +00:00

files.allwinner_up

Rename kernel config A10 into ALLWINNER_UP as it is intend to work with all

2016-08-17 20:32:08 +00:00

if_awg.c

Use the root key in the Security ID EFUSE (when valid) to generate a

2016-09-03 15:28:09 +00:00

if_awgreg.h

Allwinner Gigabit EMAC performance improvements.

2016-07-13 20:46:54 +00:00

if_emac.c

Test that the emac device is enabled in probe function

2016-11-23 18:07:44 +00:00

if_emacreg.h

Simplify the receiver code a bit.

2015-04-18 00:35:00 +00:00

std.allwinner

Split CPU_CORTEXA into CPU_CORTEXA8, for the Cortex-A8, and CPU_CORTEXA_MP,

2016-10-04 12:25:44 +00:00

std.allwinner_up

Split CPU_CORTEXA into CPU_CORTEXA8, for the Cortex-A8, and CPU_CORTEXA_MP,

2016-10-04 12:25:44 +00:00

sunxi_dma_if.m

Add support for the Allwinner DMA controller. This will be used by the at

2016-02-15 19:56:35 +00:00

timer.c

Stop including fdt_common.h from the arm code when it's unneeded.

2016-11-14 11:41:22 +00:00