freebsd-nq

at91_aicreg.h

…

at91_cfata.c

…

at91_machdep.c

Call cpu_setup() from the initarm() routine on platforms that don't use

2013-11-21 01:08:10 +00:00

at91_mci.c

Remove #include <machine/frame.h> from all the arm code that doesn't

2013-10-27 01:34:10 +00:00

at91_mcireg.h

…

at91_pdcreg.h

…

at91_pio_sam9g20.h

…

at91_pio_sam9g45.h

Add support for the Atmel AT91SAM9G45 CPU.

2012-07-26 08:01:25 +00:00

at91_pio.c

Fix regression issue after r248910.

2013-04-07 13:03:57 +00:00

at91_pioreg.h

…

at91_piovar.h

Fix regression issue after r248910.

2013-04-07 13:03:57 +00:00

at91_pit.c

at91pit->at91_pit for consistnecy with other drivers.

2012-07-11 17:11:54 +00:00

at91_pitreg.h

at91pit->at91_pit for consistnecy with other drivers.

2012-07-11 17:11:54 +00:00

at91_pmc.c

Remove #include <machine/frame.h> from all the arm code that doesn't

2013-10-27 01:34:10 +00:00

at91_pmcreg.h

Add charge pump current register.

2012-08-10 04:47:20 +00:00

at91_pmcvar.h

Correct the PLLA setting functions and centralize.

2012-08-11 05:45:19 +00:00

at91_reset.S

Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way

2012-07-10 02:14:50 +00:00

at91_rst.c

at91$DEV->at91_$DEV to match other Atmel drivers. Also, export

2012-07-11 17:11:07 +00:00

at91_rstreg.h

at91$DEV->at91_$DEV to match other Atmel drivers. Also, export

2012-07-11 17:11:07 +00:00

at91_rtc.c

Loop reading the RTC registers until the same values are obtained

2012-10-07 20:36:46 +00:00

at91_rtcreg.h

Use the RTC unit to get the time. This works on all known AT91SAM9*

2012-10-07 01:58:32 +00:00

at91_spi.c

Fetch the chip select in the bridge driver, like all the other spi

2012-08-23 22:38:37 +00:00

at91_spireg.h

…

at91_ssc.c

…

at91_sscreg.h

…

at91_st.c

Make the SoC stuff a little more modular, and start to move away from

2012-07-11 20:17:14 +00:00

at91_streg.h

Make the SoC stuff a little more modular, and start to move away from

2012-07-11 20:17:14 +00:00

at91_twi.c

…

at91_twiio.h

…

at91_twireg.h

…

at91_usartreg.h

…

at91_wdt.c

…

at91_wdtreg.h

…

at91.c

Move remaining code and data related to static device mapping into the

2013-11-04 22:45:26 +00:00

at91board.h

…

at91reg.h

The system IRQ is always IRQ 1. Make it so.

2012-07-10 02:39:03 +00:00

at91rm92reg.h

Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way

2012-07-10 02:14:50 +00:00

at91rm9200_devices.c

Fix a typo: the RXD0 pin is PA18, not PA19.

2013-03-29 18:06:54 +00:00

at91rm9200.c

Fix a typo in the CF device driver name that prevented instantiation.

2013-03-31 12:51:56 +00:00

at91rm9200var.h

Configure the peripheral pins for MCI devices. Eliminate the now-unused

2012-07-15 05:41:43 +00:00

at91sam9g20.c

Correct the PLLA setting functions and centralize.

2012-08-11 05:45:19 +00:00

at91sam9g20reg.h

Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way

2012-07-10 02:14:50 +00:00

at91sam9g45.c

Correct the PLLA setting functions and centralize.

2012-08-11 05:45:19 +00:00

at91sam9g45reg.h

Add support for the Atmel AT91SAM9G45 CPU.

2012-07-26 08:01:25 +00:00

at91sam9x5.c

Correct the PLLA setting functions and centralize.

2012-08-11 05:45:19 +00:00

at91sam9x5reg.h

These files will support the whole at91sam9x5 family when done,

2012-07-30 21:30:43 +00:00

at91sam9260.c

Update comments about setting PLLA and refernce the tables in the

2012-08-11 05:12:46 +00:00

at91sam9260reg.h

Missed one of the special AT91SAM9xxx_BASE defines. This should be

2012-07-10 02:44:15 +00:00

at91soc.c

Make the SoC stuff a little more modular, and start to move away from

2012-07-11 20:17:14 +00:00

at91soc.h

Make the SoC stuff a little more modular, and start to move away from

2012-07-11 20:17:14 +00:00

at91var.h

Remember where we found the DBGU and use that for our console.

2012-07-12 19:11:37 +00:00

board_bwct.c

Configure the peripheral pins for MCI devices. Eliminate the now-unused

2012-07-15 05:41:43 +00:00

board_eb9200.c

Preliminary Embest ATEB9200 support.

2012-08-16 05:03:59 +00:00

board_ethernut5.c

uboot should be telling us it is an ETHERNUT5 for this board. Tag it

2012-07-14 06:00:37 +00:00

board_hl200.c

Configure the peripheral pins for MCI devices. Eliminate the now-unused

2012-07-15 05:41:43 +00:00

board_hl201.c

…

board_kb920x.c

Configure the peripheral pins for MCI devices. Eliminate the now-unused

2012-07-15 05:41:43 +00:00

board_qila9g20.c

…

board_sam9g20ek.c

…

board_sam9x25ek.c

…

board_sam9260ek.c

Turns out the ETHERNUT5 isn't anything like the SAM9260-EK. Make this

2012-07-27 05:33:55 +00:00

board_sn9g45.c

Add new at91sam9g45 support and sn9g45 board to the ATMEL kernel.

2012-07-27 16:38:02 +00:00

board_tsc4370.c

Configure the peripheral pins for MCI devices. Eliminate the now-unused

2012-07-15 05:41:43 +00:00

files.at91

Unbreak building a kernel with EHCI: there's no ehci_atmelarm.c.

2012-11-26 23:30:47 +00:00

if_ate.c

Sweep up a bit of arm-land fallout after r257244; include necessary

2013-10-28 15:20:17 +00:00

if_atereg.h

…

if_macb.c

Mechanically substitute flags from historic mbuf allocator with

2012-12-05 08:04:20 +00:00

if_macbreg.h

…

if_macbvar.h

…

std.at91

Set machine correctly on ARM. This allows universe to use the correct world

2012-08-18 05:48:19 +00:00

std.at91sam9

Set machine correctly on ARM. This allows universe to use the correct world

2012-08-18 05:48:19 +00:00

std.at91sam9g45

Set machine correctly on ARM. This allows universe to use the correct world

2012-08-18 05:48:19 +00:00

std.atmel

Set machine correctly on ARM. This allows universe to use the correct world

2012-08-18 05:48:19 +00:00

std.bwct

…

std.eb9200

Preliminary Embest ATEB9200 support.

2012-08-16 05:03:59 +00:00

std.ethernut5

…

std.hl200

…

std.hl201

…

std.kb920x

…

std.qila9g20

…

std.sam9g20ek

…

std.sam9x25ek

These files will support the whole at91sam9x5 family when done,

2012-07-30 21:30:43 +00:00

std.sam9260ek

Add preliminary support for Atmel SAM9260-EK evaluation kit.

2012-07-14 06:13:23 +00:00

std.sn9g45

Add support for the DesignA Electronics Snapper9g45 System on Module.

2012-07-26 08:05:28 +00:00

std.tsc4370

…

uart_bus_at91usart.c

Some models have 6 USARTS + DBGU. Set a consistent name.

2012-07-26 05:46:56 +00:00

uart_cpu_at91usart.c

This file is no longer AT91RM9200 specific, but now is generic to all

2012-07-12 19:15:38 +00:00

uart_dev_at91usart.c

Enable hardware flow control and high speed bulk data transfer in at91 uarts.

2013-04-01 00:00:10 +00:00