d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
00e501d720
freebsd-skq/sys/dev/ath/if_ath_rx.c

1556 lines
44 KiB
C
Raw Normal View History

Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
/*-
sys/dev: further adoption of SPDX licensing ID tags. Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone - task. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts.
2017-11-27 14:52:40 +00:00
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
* redistribution must be conditioned upon including a substantially
* similar Disclaimer requirement for further binary redistribution.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Driver for the Atheros Wireless LAN controller.
*
* This software is derived from work of Atsushi Onoe; his contribution
* is greatly appreciated.
*/
#include "opt_inet.h"
#include "opt_ath.h"
/*
* This is needed for register operations which are performed
* by the driver - eg, calls to ath_hal_gettsf32().
*
* It's also required for any AH_DEBUG checks in here, eg the
* module dependencies.
*/
#include "opt_ah.h"
#include "opt_wlan.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sysctl.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/errno.h>
#include <sys/callout.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/kthread.h>
#include <sys/taskqueue.h>
#include <sys/priv.h>
#include <sys/module.h>
#include <sys/ktr.h>
#include <sys/smp.h> /* for mp_ncpus */
#include <machine/bus.h>
#include <net/if.h>
The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare to this event, adding if_var.h to files that do need it. Also, include all includes that now are included due to implicit pollution via if_var.h Sponsored by: Netflix Sponsored by: Nginx, Inc.
2013-10-26 17:58:36 +00:00
#include <net/if_var.h>
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <net/if_arp.h>
#include <net/ethernet.h>
#include <net/if_llc.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_regdomain.h>
#ifdef IEEE80211_SUPPORT_SUPERG
#include <net80211/ieee80211_superg.h>
#endif
#ifdef IEEE80211_SUPPORT_TDMA
#include <net80211/ieee80211_tdma.h>
#endif
#include <net/bpf.h>
#ifdef INET
#include <netinet/in.h>
#include <netinet/if_ether.h>
#endif
#include <dev/ath/if_athvar.h>
#include <dev/ath/ath_hal/ah_devid.h> /* XXX for softled */
#include <dev/ath/ath_hal/ah_diagcodes.h>
#include <dev/ath/if_ath_debug.h>
#include <dev/ath/if_ath_misc.h>
#include <dev/ath/if_ath_tsf.h>
#include <dev/ath/if_ath_tx.h>
#include <dev/ath/if_ath_sysctl.h>
#include <dev/ath/if_ath_led.h>
#include <dev/ath/if_ath_keycache.h>
#include <dev/ath/if_ath_rx.h>
Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c. There's some TX path TDMA code in if_ath_tx.c which should be migrated out, but first I should likely try and verify/fix/repair the TDMA support in 9.x and -HEAD.
2012-05-20 02:49:42 +00:00
#include <dev/ath/if_ath_beacon.h>
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
#include <dev/ath/if_athdfs.h>
[ath] migrate ioctl and busdma memory operations out into separate source files. This should be a big no-op pass; and reduces the size of if_ath.c. I'm hopefully soon going to take a whack at the USB support for ath(4) and this'll require some reuse of the busdma memory code.
2015-11-24 03:42:58 +00:00
#include <dev/ath/if_ath_descdma.h>
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
#ifdef ATH_TX99_DIAG
#include <dev/ath/ath_tx99/ath_tx99.h>
#endif
Add some hooks into the driver to attach, detach and record EDMA descriptor events. This is primarily for the TX EDMA and TX EDMA completion. I haven't yet tied it into the EDMA RX path or the legacy TX/RX path. Things that I don't quite like: * Make the pointer type 'void' in ath_softc and have if_ath_alq*() return a malloc'ed buffer. That would remove the need to include if_ath_alq.h in if_athvar.h. * The sysctl setup needs to be cleaned up.
2012-11-08 18:11:31 +00:00
#ifdef ATH_DEBUG_ALQ
#include <dev/ath/if_ath_alq.h>
#endif
Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver. The AR9485 chip and AR933x SoC both implement LNA diversity. There are a few extra things that need to happen before this can be flipped on for those chips (mostly to do with setting up the different bias values and LNA1/LNA2 RSSI differences) but the first stage is putting this code into the driver layer so it can be reused. This has the added benefit of making it easier to expose configuration options and diagnostic information via the ioctl API. That's not yet being done but it sure would be nice to do so. Tested: * AR9285, with LNA diversity enabled * AR9285, with LNA diversity disabled in EEPROM
2013-06-12 14:52:57 +00:00
#include <dev/ath/if_ath_lna_div.h>
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
/*
* Calculate the receive filter according to the
* operating mode and state:
*
* o always accept unicast, broadcast, and multicast traffic
* o accept PHY error frames when hardware doesn't have MIB support
* to count and we need them for ANI (sta mode only until recently)
* and we are not scanning (ANI is disabled)
* NB: older hal's add rx filter bits out of sight and we need to
* blindly preserve them
* o probe request frames are accepted only when operating in
* hostap, adhoc, mesh, or monitor modes
* o enable promiscuous mode
* - when in monitor mode
* - if interface marked PROMISC (assumes bridge setting is filtered)
* o accept beacons:
* - when operating in station mode for collecting rssi data when
* the station is otherwise quiet, or
* - when operating in adhoc mode so the 802.11 layer creates
* node table entries for peers,
* - when scanning
* - when doing s/w beacon miss (e.g. for ap+sta)
* - when operating in ap mode in 11g to detect overlapping bss that
* require protection
* - when operating in mesh mode to detect neighbors
* o accept control frames:
* - when in monitor mode
* XXX HT protection for 11n
*/
u_int32_t
ath_calcrxfilter(struct ath_softc *sc)
{
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
struct ieee80211com *ic = &sc->sc_ic;
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
u_int32_t rfilt;
rfilt = HAL_RX_FILTER_UCAST | HAL_RX_FILTER_BCAST | HAL_RX_FILTER_MCAST;
if (!sc->sc_needmib && !sc->sc_scanning)
rfilt |= HAL_RX_FILTER_PHYERR;
if (ic->ic_opmode != IEEE80211_M_STA)
rfilt |= HAL_RX_FILTER_PROBEREQ;
/* XXX ic->ic_monvaps != 0? */
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
if (ic->ic_opmode == IEEE80211_M_MONITOR || ic->ic_promisc > 0)
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
rfilt |= HAL_RX_FILTER_PROM;
Bring over some initial power save management support, reset path fixes and beacon programming / debugging into the ath(4) driver. The basic power save tracking: * Add some new code to track the current desired powersave state; and * Add some reference count tracking so we know when the NIC is awake; then * Add code in all the points where we're about to touch the hardware and push it to force-wake. Then, how things are moved into power save: * Only move into network-sleep during a RUN->SLEEP transition; * Force wake the hardware up everywhere that we're about to touch the hardware. The net80211 stack takes care of doing RUN<->SLEEP<->(other) state transitions so we don't have to do it in the driver. Next, when to wake things up: * In short - everywhere we touch the hardware. * The hardware will take care of staying awake if things are queued in the transmit queue(s); it'll then transit down to sleep if there's nothing left. This way we don't have to track the software / hardware transmit queue(s) and keep the hardware awake for those. Then, some transmit path fixes that aren't related but useful: * Force EAPOL frames to go out at the lowest rate. This improves reliability during the encryption handshake after 802.11 negotiation. Next, some reset path fixes! * Fix the overlap between reset and transmit pause so we don't transmit frames during a reset. * Some noisy environments will end up taking a lot longer to reset than normal, so extend the reset period and drop the raise the reset interval to be more realistic and give the hardware some time to finish calibration. * Skip calibration during the reset path. Tsk! Then, beacon fixes in station mode! * Add a _lot_ more debugging in the station beacon reset path. This is all quite fluid right now. * Modify the STA beacon programming code to try and take the TU gap between desired TSF and the target TU into account. (Lifted from QCA.) Tested: * AR5210 * AR5211 * AR5212 * AR5413 * AR5416 * AR9280 * AR9285 TODO: * More AP, IBSS, mesh, TDMA testing * Thorough AR9380 and later testing! * AR9160 and AR9287 testing Obtained from: QCA
2014-04-30 02:19:41 +00:00
/*
* Only listen to all beacons if we're scanning.
*
* Otherwise we only really need to hear beacons from
* our own BSSID.
[ath] listen to all beacons in IBSS and software beacon miss. I added MYBEACON support a while ago to listen to beacons that are only for your configured BSSID. For AR9380 and later NICs this results in a lot less chip wakeups in station mode as it then only shows you beacons that are destined to you. However in IBSS mode you really do want to hear all beacons so you can do IBSS merges. Oops. So only use MYBEACON for STA + not-scanning, and just use BEACON for the other modes it used to use BEACON for. This doesn't completely fix IBSS merges though - there are still some conditions to chase down and fix.
2015-11-25 18:24:49 +00:00
*
* IBSS? software beacon miss? Just receive all beacons.
* We need to hear beacons/probe requests from everyone so
* we can merge ibss.
Bring over some initial power save management support, reset path fixes and beacon programming / debugging into the ath(4) driver. The basic power save tracking: * Add some new code to track the current desired powersave state; and * Add some reference count tracking so we know when the NIC is awake; then * Add code in all the points where we're about to touch the hardware and push it to force-wake. Then, how things are moved into power save: * Only move into network-sleep during a RUN->SLEEP transition; * Force wake the hardware up everywhere that we're about to touch the hardware. The net80211 stack takes care of doing RUN<->SLEEP<->(other) state transitions so we don't have to do it in the driver. Next, when to wake things up: * In short - everywhere we touch the hardware. * The hardware will take care of staying awake if things are queued in the transmit queue(s); it'll then transit down to sleep if there's nothing left. This way we don't have to track the software / hardware transmit queue(s) and keep the hardware awake for those. Then, some transmit path fixes that aren't related but useful: * Force EAPOL frames to go out at the lowest rate. This improves reliability during the encryption handshake after 802.11 negotiation. Next, some reset path fixes! * Fix the overlap between reset and transmit pause so we don't transmit frames during a reset. * Some noisy environments will end up taking a lot longer to reset than normal, so extend the reset period and drop the raise the reset interval to be more realistic and give the hardware some time to finish calibration. * Skip calibration during the reset path. Tsk! Then, beacon fixes in station mode! * Add a _lot_ more debugging in the station beacon reset path. This is all quite fluid right now. * Modify the STA beacon programming code to try and take the TU gap between desired TSF and the target TU into account. (Lifted from QCA.) Tested: * AR5210 * AR5211 * AR5212 * AR5413 * AR5416 * AR9280 * AR9285 TODO: * More AP, IBSS, mesh, TDMA testing * Thorough AR9380 and later testing! * AR9160 and AR9287 testing Obtained from: QCA
2014-04-30 02:19:41 +00:00
*/
[ath] listen to all beacons in IBSS and software beacon miss. I added MYBEACON support a while ago to listen to beacons that are only for your configured BSSID. For AR9380 and later NICs this results in a lot less chip wakeups in station mode as it then only shows you beacons that are destined to you. However in IBSS mode you really do want to hear all beacons so you can do IBSS merges. Oops. So only use MYBEACON for STA + not-scanning, and just use BEACON for the other modes it used to use BEACON for. This doesn't completely fix IBSS merges though - there are still some conditions to chase down and fix.
2015-11-25 18:24:49 +00:00
if (ic->ic_opmode == IEEE80211_M_IBSS || sc->sc_swbmiss) {
rfilt |= HAL_RX_FILTER_BEACON;
} else if (ic->ic_opmode == IEEE80211_M_STA) {
Bring over some initial power save management support, reset path fixes and beacon programming / debugging into the ath(4) driver. The basic power save tracking: * Add some new code to track the current desired powersave state; and * Add some reference count tracking so we know when the NIC is awake; then * Add code in all the points where we're about to touch the hardware and push it to force-wake. Then, how things are moved into power save: * Only move into network-sleep during a RUN->SLEEP transition; * Force wake the hardware up everywhere that we're about to touch the hardware. The net80211 stack takes care of doing RUN<->SLEEP<->(other) state transitions so we don't have to do it in the driver. Next, when to wake things up: * In short - everywhere we touch the hardware. * The hardware will take care of staying awake if things are queued in the transmit queue(s); it'll then transit down to sleep if there's nothing left. This way we don't have to track the software / hardware transmit queue(s) and keep the hardware awake for those. Then, some transmit path fixes that aren't related but useful: * Force EAPOL frames to go out at the lowest rate. This improves reliability during the encryption handshake after 802.11 negotiation. Next, some reset path fixes! * Fix the overlap between reset and transmit pause so we don't transmit frames during a reset. * Some noisy environments will end up taking a lot longer to reset than normal, so extend the reset period and drop the raise the reset interval to be more realistic and give the hardware some time to finish calibration. * Skip calibration during the reset path. Tsk! Then, beacon fixes in station mode! * Add a _lot_ more debugging in the station beacon reset path. This is all quite fluid right now. * Modify the STA beacon programming code to try and take the TU gap between desired TSF and the target TU into account. (Lifted from QCA.) Tested: * AR5210 * AR5211 * AR5212 * AR5413 * AR5416 * AR9280 * AR9285 TODO: * More AP, IBSS, mesh, TDMA testing * Thorough AR9380 and later testing! * AR9160 and AR9287 testing Obtained from: QCA
2014-04-30 02:19:41 +00:00
if (sc->sc_do_mybeacon && ! sc->sc_scanning) {
rfilt |= HAL_RX_FILTER_MYBEACON;
} else { /* scanning, non-mybeacon chips */
rfilt |= HAL_RX_FILTER_BEACON;
}
}
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
/*
* NB: We don't recalculate the rx filter when
* ic_protmode changes; otherwise we could do
* this only when ic_protmode != NONE.
*/
if (ic->ic_opmode == IEEE80211_M_HOSTAP &&
IEEE80211_IS_CHAN_ANYG(ic->ic_curchan))
rfilt |= HAL_RX_FILTER_BEACON;
/*
* Enable hardware PS-POLL RX only for hostap mode;
* STA mode sends PS-POLL frames but never
* receives them.
*/
if (ath_hal_getcapability(sc->sc_ah, HAL_CAP_PSPOLL,
0, NULL) == HAL_OK &&
ic->ic_opmode == IEEE80211_M_HOSTAP)
rfilt |= HAL_RX_FILTER_PSPOLL;
if (sc->sc_nmeshvaps) {
rfilt |= HAL_RX_FILTER_BEACON;
if (sc->sc_hasbmatch)
rfilt |= HAL_RX_FILTER_BSSID;
else
rfilt |= HAL_RX_FILTER_PROM;
}
if (ic->ic_opmode == IEEE80211_M_MONITOR)
rfilt |= HAL_RX_FILTER_CONTROL;
/*
* Enable RX of compressed BAR frames only when doing
* 802.11n. Required for A-MPDU.
*/
if (IEEE80211_IS_CHAN_HT(ic->ic_curchan))
rfilt |= HAL_RX_FILTER_COMPBAR;
/*
* Enable radar PHY errors if requested by the
* DFS module.
*/
if (sc->sc_dodfs)
rfilt |= HAL_RX_FILTER_PHYRADAR;
If spectral scan is enabled, ensure radar report PHY errors are also enabled.
2013-01-08 22:12:45 +00:00
/*
* Enable spectral PHY errors if requested by the
* spectral module.
*/
if (sc->sc_dospectral)
rfilt |= HAL_RX_FILTER_PHYRADAR;
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
DPRINTF(sc, ATH_DEBUG_MODE, "%s: RX filter 0x%x, %s\n",
__func__, rfilt, ieee80211_opmode_name[ic->ic_opmode]);
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
return rfilt;
}
Begin abstracting out the RX path in preparation for RX EDMA support. The RX EDMA support requires a modified approach to the RX descriptor handling. Specifically: * There's now two RX queues - high and low priority; * The RX queues are implemented as FIFOs; they're now an array of pointers to buffers; * .. and the RX buffer and descriptor are in the same "buffer", rather than being separate. So to that end, this commit abstracts out most of the RX related functions from the bulk of the driver. Notably, the RX DMA/buffer allocation isn't updated, primarily because I haven't yet fleshed out what it should look like. Whilst I'm here, create a set of matching but mostly unimplemented EDMA stubs. Tested: * AR9280, station mode TODO: * Thorough AP and other mode testing for non-EDMA chips; * Figure out how to allocate RX buffers suitable for RX EDMA, including correctly setting the mbuf length to compensate for the RX descriptor and completion status area.
2012-07-03 06:59:12 +00:00
static int
ath_legacy_rxbuf_init(struct ath_softc *sc, struct ath_buf *bf)
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
{
struct ath_hal *ah = sc->sc_ah;
int error;
struct mbuf *m;
struct ath_desc *ds;
Modify the RX path to keep the previous RX descriptor around once it's used. It turns out that the RX DMA engine does the same last-descriptor-link- pointer-re-reading trick that the TX DMA engine. That is, the hardware re-reads the link pointer before it moves onto the next descriptor. Thus we can't free a descriptor before we move on; it's possible the hardware will need to re-read the link pointer before we overwrite it with a new one. Tested: * AR5416, STA mode TODO: * more thorough AP and STA mode testing! * test on other pre-AR9380 NICs, just to be sure. * Break out the RX descriptor grabbing bits from the RX completion bits, like what is done in the RX EDMA code, so .. * .. the RX lock can be held during ath_rx_proc(), but not across packet input.
2014-05-06 01:15:42 +00:00
/* XXX TODO: ATH_RX_LOCK_ASSERT(sc); */
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
m = bf->bf_m;
if (m == NULL) {
/*
* NB: by assigning a page to the rx dma buffer we
* implicitly satisfy the Atheros requirement that
* this buffer be cache-line-aligned and sized to be
* multiple of the cache line size. Not doing this
* causes weird stuff to happen (for the 5210 at least).
*/
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
if (m == NULL) {
DPRINTF(sc, ATH_DEBUG_ANY,
"%s: no mbuf/cluster\n", __func__);
sc->sc_stats.ast_rx_nombuf++;
return ENOMEM;
}
m->m_pkthdr.len = m->m_len = m->m_ext.ext_size;
error = bus_dmamap_load_mbuf_sg(sc->sc_dmat,
bf->bf_dmamap, m,
bf->bf_segs, &bf->bf_nseg,
BUS_DMA_NOWAIT);
if (error != 0) {
DPRINTF(sc, ATH_DEBUG_ANY,
"%s: bus_dmamap_load_mbuf_sg failed; error %d\n",
__func__, error);
sc->sc_stats.ast_rx_busdma++;
m_freem(m);
return error;
}
KASSERT(bf->bf_nseg == 1,
("multi-segment packet; nseg %u", bf->bf_nseg));
bf->bf_m = m;
}
bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_PREREAD);
/*
* Setup descriptors. For receive we always terminate
* the descriptor list with a self-linked entry so we'll
* not get overrun under high load (as can happen with a
* 5212 when ANI processing enables PHY error frames).
*
* To insure the last descriptor is self-linked we create
* each descriptor as self-linked and add it to the end. As
* each additional descriptor is added the previous self-linked
* entry is ``fixed'' naturally. This should be safe even
* if DMA is happening. When processing RX interrupts we
* never remove/process the last, self-linked, entry on the
* descriptor list. This insures the hardware always has
* someplace to write a new frame.
*/
/*
* 11N: we can no longer afford to self link the last descriptor.
* MAC acknowledges BA status as long as it copies frames to host
* buffer (or rx fifo). This can incorrectly acknowledge packets
* to a sender if last desc is self-linked.
*/
ds = bf->bf_desc;
if (sc->sc_rxslink)
ds->ds_link = bf->bf_daddr; /* link to self */
else
ds->ds_link = 0; /* terminate the list */
ds->ds_data = bf->bf_segs[0].ds_addr;
ath_hal_setuprxdesc(ah, ds
, m->m_len /* buffer size */
, 0
);
if (sc->sc_rxlink != NULL)
*sc->sc_rxlink = bf->bf_daddr;
sc->sc_rxlink = &ds->ds_link;
return 0;
}
/*
* Intercept management frames to collect beacon rssi data
* and to do ibss merges.
*/
void
ath_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m,
Begin plumbing ieee80211_rx_stats through the receive path. Smart NICs with firmware (eg wpi, iwn, the new atheros parts, the intel 7260 series, etc) support doing a lot of things in firmware. This includes but isn't limited to things like scanning, sending probe requests and receiving probe responses. However, net80211 doesn't know about any of this - it still drives the whole scan/probe infrastructure itself. In order to move towards suppoting smart NICs, the receive path needs to know about the channel/details for each received packet. In at least the iwn and 7260 firmware (and I believe wpi, but I haven't tried it yet) it will do the scanning, power-save and off-channel buffering for you - all you need to do is handle receiving beacons and probe responses on channels that aren't what you're currently on. However the whole receive path is peppered with ic->ic_curchan and manual scan/powersave handling. The beacon parsing code also checks ic->ic_curchan to determine if the received beacon is on the correct channel or not.[1] So: * add freq/ieee values to ieee80211_rx_stats; * change ieee80211_parse_beacon() to accept the 'current' channel as an argument; * modify the iv_input() and iv_recv_mgmt() methods to include the rx_stats; * add a new method - ieee80211_lookup_channel_rxstats() - that looks up a channel based on the contents of ieee80211_rx_stats; * if it exists, use it in the mgmt path to switch the current channel (which still defaults to ic->ic_curchan) over to something determined by rx_stats. This is enough to kick-start scan offload support in the Intel 7260 driver that Rui/I are working on. It also is a good start for scan offload support for a handful of existing NICs (wpi, iwn, some USB parts) and it'll very likely dramatically improve stability/performance there. It's not the whole thing - notably, we don't need to do powersave, we should not scan all channels, and we should leave probe request sending to the firmware and not do it ourselves. But, this allows for continued development on the above features whilst actually having a somewhat working NIC. TODO: * Finish tidying up how the net80211 input path works. Right now ieee80211_input / ieee80211_input_all act as the top-level that everything feeds into; it should change so the MIMO input routines are those and the legacy routines are phased out. * The band selection should be done by the driver, not by the net80211 layer. * ieee80211_lookup_channel_rxstats() only determines 11b or 11g channels for now - this is enough for scanning, but not 100% true in all cases. If we ever need to handle off-channel scan support for things like static-40MHz or static-80MHz, or turbo-G, or half/quarter rates, then we should extend this. [1] This is a side effect of frequency-hopping and CCK modes - you can receive beacons when you think you're on a different channel. In particular, CCK (which is used by the low 11b rates, eg beacons!) is decodable from adjacent channels - just at a low SNR. FH is a side effect of having the hardware/firmware do the frequency hopping - it may pick up beacons transmitted from other FH networks that are in a different phase of hopping frequencies.
2015-05-25 16:37:41 +00:00
int subtype, const struct ieee80211_rx_stats *rxs, int rssi, int nf)
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
{
struct ieee80211vap *vap = ni->ni_vap;
Remove most of the references of ifp->if_softc and replace with references to ic->ic_softc. This is in preparation for gleb's ifnet work. Tested: * ath(4), STA mode * ath(4), hostap mode * make universe
2015-08-17 02:04:11 +00:00
struct ath_softc *sc = vap->iv_ic->ic_softc;
Bring over some initial power save management support, reset path fixes and beacon programming / debugging into the ath(4) driver. The basic power save tracking: * Add some new code to track the current desired powersave state; and * Add some reference count tracking so we know when the NIC is awake; then * Add code in all the points where we're about to touch the hardware and push it to force-wake. Then, how things are moved into power save: * Only move into network-sleep during a RUN->SLEEP transition; * Force wake the hardware up everywhere that we're about to touch the hardware. The net80211 stack takes care of doing RUN<->SLEEP<->(other) state transitions so we don't have to do it in the driver. Next, when to wake things up: * In short - everywhere we touch the hardware. * The hardware will take care of staying awake if things are queued in the transmit queue(s); it'll then transit down to sleep if there's nothing left. This way we don't have to track the software / hardware transmit queue(s) and keep the hardware awake for those. Then, some transmit path fixes that aren't related but useful: * Force EAPOL frames to go out at the lowest rate. This improves reliability during the encryption handshake after 802.11 negotiation. Next, some reset path fixes! * Fix the overlap between reset and transmit pause so we don't transmit frames during a reset. * Some noisy environments will end up taking a lot longer to reset than normal, so extend the reset period and drop the raise the reset interval to be more realistic and give the hardware some time to finish calibration. * Skip calibration during the reset path. Tsk! Then, beacon fixes in station mode! * Add a _lot_ more debugging in the station beacon reset path. This is all quite fluid right now. * Modify the STA beacon programming code to try and take the TU gap between desired TSF and the target TU into account. (Lifted from QCA.) Tested: * AR5210 * AR5211 * AR5212 * AR5413 * AR5416 * AR9280 * AR9285 TODO: * More AP, IBSS, mesh, TDMA testing * Thorough AR9380 and later testing! * AR9160 and AR9287 testing Obtained from: QCA
2014-04-30 02:19:41 +00:00
uint64_t tsf_beacon_old, tsf_beacon;
uint64_t nexttbtt;
int64_t tsf_delta;
int32_t tsf_delta_bmiss;
int32_t tsf_remainder;
uint64_t tsf_beacon_target;
* Modify the beacon interval in debugging to be ni_intval, not 102400 * Be paranoid about avoiding divide-by-zero. Tested: * AR9380, STA mode
2014-04-30 02:44:07 +00:00
int tsf_intval;
Bring over some initial power save management support, reset path fixes and beacon programming / debugging into the ath(4) driver. The basic power save tracking: * Add some new code to track the current desired powersave state; and * Add some reference count tracking so we know when the NIC is awake; then * Add code in all the points where we're about to touch the hardware and push it to force-wake. Then, how things are moved into power save: * Only move into network-sleep during a RUN->SLEEP transition; * Force wake the hardware up everywhere that we're about to touch the hardware. The net80211 stack takes care of doing RUN<->SLEEP<->(other) state transitions so we don't have to do it in the driver. Next, when to wake things up: * In short - everywhere we touch the hardware. * The hardware will take care of staying awake if things are queued in the transmit queue(s); it'll then transit down to sleep if there's nothing left. This way we don't have to track the software / hardware transmit queue(s) and keep the hardware awake for those. Then, some transmit path fixes that aren't related but useful: * Force EAPOL frames to go out at the lowest rate. This improves reliability during the encryption handshake after 802.11 negotiation. Next, some reset path fixes! * Fix the overlap between reset and transmit pause so we don't transmit frames during a reset. * Some noisy environments will end up taking a lot longer to reset than normal, so extend the reset period and drop the raise the reset interval to be more realistic and give the hardware some time to finish calibration. * Skip calibration during the reset path. Tsk! Then, beacon fixes in station mode! * Add a _lot_ more debugging in the station beacon reset path. This is all quite fluid right now. * Modify the STA beacon programming code to try and take the TU gap between desired TSF and the target TU into account. (Lifted from QCA.) Tested: * AR5210 * AR5211 * AR5212 * AR5413 * AR5416 * AR9280 * AR9285 TODO: * More AP, IBSS, mesh, TDMA testing * Thorough AR9380 and later testing! * AR9160 and AR9287 testing Obtained from: QCA
2014-04-30 02:19:41 +00:00
net80211: replace internal LE_READ_*/LE_WRITE_* macro with system le*dec / le*enc functions. Replace net80211 specific macros with system-wide bytestream encoding/decoding functions: - LE_READ_2 -> le16dec - LE_READ_4 -> le32dec - LE_WRITE_2 -> le16enc - LE_WRITE_4 -> le32enc + drop ieee80211_input.h include, where it was included for these operations only. Reviewed by: adrian Differential Revision: https://reviews.freebsd.org/D6030
2016-04-20 18:29:30 +00:00
tsf_beacon_old = ((uint64_t) le32dec(ni->ni_tstamp.data + 4)) << 32;
tsf_beacon_old |= le32dec(ni->ni_tstamp.data);
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
* Modify the beacon interval in debugging to be ni_intval, not 102400 * Be paranoid about avoiding divide-by-zero. Tested: * AR9380, STA mode
2014-04-30 02:44:07 +00:00
#define TU_TO_TSF(_tu) (((u_int64_t)(_tu)) << 10)
tsf_intval = 1;
There's no need to be this paranoid - ni is deferenced before this point. Coverity ID: CID 1211937
2014-05-07 07:57:50 +00:00
if (ni->ni_intval > 0) {
* Modify the beacon interval in debugging to be ni_intval, not 102400 * Be paranoid about avoiding divide-by-zero. Tested: * AR9380, STA mode
2014-04-30 02:44:07 +00:00
tsf_intval = TU_TO_TSF(ni->ni_intval);
}
#undef TU_TO_TSF
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
/*
* Call up first so subsequent work can use information
* potentially stored in the node (e.g. for ibss merge).
*/
Begin plumbing ieee80211_rx_stats through the receive path. Smart NICs with firmware (eg wpi, iwn, the new atheros parts, the intel 7260 series, etc) support doing a lot of things in firmware. This includes but isn't limited to things like scanning, sending probe requests and receiving probe responses. However, net80211 doesn't know about any of this - it still drives the whole scan/probe infrastructure itself. In order to move towards suppoting smart NICs, the receive path needs to know about the channel/details for each received packet. In at least the iwn and 7260 firmware (and I believe wpi, but I haven't tried it yet) it will do the scanning, power-save and off-channel buffering for you - all you need to do is handle receiving beacons and probe responses on channels that aren't what you're currently on. However the whole receive path is peppered with ic->ic_curchan and manual scan/powersave handling. The beacon parsing code also checks ic->ic_curchan to determine if the received beacon is on the correct channel or not.[1] So: * add freq/ieee values to ieee80211_rx_stats; * change ieee80211_parse_beacon() to accept the 'current' channel as an argument; * modify the iv_input() and iv_recv_mgmt() methods to include the rx_stats; * add a new method - ieee80211_lookup_channel_rxstats() - that looks up a channel based on the contents of ieee80211_rx_stats; * if it exists, use it in the mgmt path to switch the current channel (which still defaults to ic->ic_curchan) over to something determined by rx_stats. This is enough to kick-start scan offload support in the Intel 7260 driver that Rui/I are working on. It also is a good start for scan offload support for a handful of existing NICs (wpi, iwn, some USB parts) and it'll very likely dramatically improve stability/performance there. It's not the whole thing - notably, we don't need to do powersave, we should not scan all channels, and we should leave probe request sending to the firmware and not do it ourselves. But, this allows for continued development on the above features whilst actually having a somewhat working NIC. TODO: * Finish tidying up how the net80211 input path works. Right now ieee80211_input / ieee80211_input_all act as the top-level that everything feeds into; it should change so the MIMO input routines are those and the legacy routines are phased out. * The band selection should be done by the driver, not by the net80211 layer. * ieee80211_lookup_channel_rxstats() only determines 11b or 11g channels for now - this is enough for scanning, but not 100% true in all cases. If we ever need to handle off-channel scan support for things like static-40MHz or static-80MHz, or turbo-G, or half/quarter rates, then we should extend this. [1] This is a side effect of frequency-hopping and CCK modes - you can receive beacons when you think you're on a different channel. In particular, CCK (which is used by the low 11b rates, eg beacons!) is decodable from adjacent channels - just at a low SNR. FH is a side effect of having the hardware/firmware do the frequency hopping - it may pick up beacons transmitted from other FH networks that are in a different phase of hopping frequencies.
2015-05-25 16:37:41 +00:00
ATH_VAP(vap)->av_recv_mgmt(ni, m, subtype, rxs, rssi, nf);
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
switch (subtype) {
case IEEE80211_FC0_SUBTYPE_BEACON:
[ath] [ath_rate] Fix ANI calibration during non-ACTIVE states; start poking at rate control These are some fun issues I've found with my upstairs wifi link at such a ridiculous low signal level (like, < 5dB.) * Add per-station tx/rx rssi statistics, in potential preparation to use that in the RX rate control. * Call the rate control on each received frame to let it potentially use it as a hint for what rates to potentially use. It's a no-op right now. * Do ANI calibration during scan as well. The ath_newstate() call was disabling the ANI timer and only re-enabling it during transitions to _RUN. This has the unfortunate side-effect that if ANI deafened the NIC because of interference and it disassociated, it wouldn't be reset and the scan would never hear beacons. The ANI configuration is stored at least globally on some HALs and per-channel on others. Because of this a NIC reset wouldn't help; the ANI parameters would simply be programmed back in. Now, I have a feeling I also need to do this during AUTH/ASSOC too and maybe, if I'm feeling clever, I need to reset the ANI parameters on a given channel during a transition through INIT or if the VAP is destroyed/re-created. However for now this gets me out of the immediate weeds with connectivity upstairs (and thus I /can/ commit); I'll keep chipping away at tidying this stuff up in subsequent commits. Tested: * AR9344 (Wasp), 2G STA mode
2019-05-05 04:56:37 +00:00
/*
* Always update the per-node beacon RSSI if we're hearing
* beacons from that node.
*/
ATH_RSSI_LPF(ATH_NODE(ni)->an_node_stats.ns_avgbrssi, rssi);
Bring over some initial power save management support, reset path fixes and beacon programming / debugging into the ath(4) driver. The basic power save tracking: * Add some new code to track the current desired powersave state; and * Add some reference count tracking so we know when the NIC is awake; then * Add code in all the points where we're about to touch the hardware and push it to force-wake. Then, how things are moved into power save: * Only move into network-sleep during a RUN->SLEEP transition; * Force wake the hardware up everywhere that we're about to touch the hardware. The net80211 stack takes care of doing RUN<->SLEEP<->(other) state transitions so we don't have to do it in the driver. Next, when to wake things up: * In short - everywhere we touch the hardware. * The hardware will take care of staying awake if things are queued in the transmit queue(s); it'll then transit down to sleep if there's nothing left. This way we don't have to track the software / hardware transmit queue(s) and keep the hardware awake for those. Then, some transmit path fixes that aren't related but useful: * Force EAPOL frames to go out at the lowest rate. This improves reliability during the encryption handshake after 802.11 negotiation. Next, some reset path fixes! * Fix the overlap between reset and transmit pause so we don't transmit frames during a reset. * Some noisy environments will end up taking a lot longer to reset than normal, so extend the reset period and drop the raise the reset interval to be more realistic and give the hardware some time to finish calibration. * Skip calibration during the reset path. Tsk! Then, beacon fixes in station mode! * Add a _lot_ more debugging in the station beacon reset path. This is all quite fluid right now. * Modify the STA beacon programming code to try and take the TU gap between desired TSF and the target TU into account. (Lifted from QCA.) Tested: * AR5210 * AR5211 * AR5212 * AR5413 * AR5416 * AR9280 * AR9285 TODO: * More AP, IBSS, mesh, TDMA testing * Thorough AR9380 and later testing! * AR9160 and AR9287 testing Obtained from: QCA
2014-04-30 02:19:41 +00:00
/*
[ath] Only process beacon frames for the IBSS/BSSID if appropriate. * Don't use arbitrary frames for the average RX RSSI - only frames from the current BSSID * Don't log / do the syncbeacon logic for another BSSID and definitely don't do the syncbeacon call if we miss beacons outside of STA mode. * Don't do the IBSS merge bits if the current node plainly won't ever match our current BSS (ie, the IBSS doesn't have to match, but all the same bits that we check in ieee80211_ibss_merge() have to match.) Tested: * ath(4), AR9380, IBSS mode, surrounded by a lot of IBSS 11ac networks. Sponsored by: Eva Automation, Inc.
2016-04-09 00:58:38 +00:00
* Only do the following processing if it's for
* the current BSS.
*
* In scan and IBSS mode we receive all beacons,
* which means we need to filter out stuff
* that isn't for us or we'll end up constantly
* trying to sync / merge to BSSes that aren't
* actually us.
Bring over some initial power save management support, reset path fixes and beacon programming / debugging into the ath(4) driver. The basic power save tracking: * Add some new code to track the current desired powersave state; and * Add some reference count tracking so we know when the NIC is awake; then * Add code in all the points where we're about to touch the hardware and push it to force-wake. Then, how things are moved into power save: * Only move into network-sleep during a RUN->SLEEP transition; * Force wake the hardware up everywhere that we're about to touch the hardware. The net80211 stack takes care of doing RUN<->SLEEP<->(other) state transitions so we don't have to do it in the driver. Next, when to wake things up: * In short - everywhere we touch the hardware. * The hardware will take care of staying awake if things are queued in the transmit queue(s); it'll then transit down to sleep if there's nothing left. This way we don't have to track the software / hardware transmit queue(s) and keep the hardware awake for those. Then, some transmit path fixes that aren't related but useful: * Force EAPOL frames to go out at the lowest rate. This improves reliability during the encryption handshake after 802.11 negotiation. Next, some reset path fixes! * Fix the overlap between reset and transmit pause so we don't transmit frames during a reset. * Some noisy environments will end up taking a lot longer to reset than normal, so extend the reset period and drop the raise the reset interval to be more realistic and give the hardware some time to finish calibration. * Skip calibration during the reset path. Tsk! Then, beacon fixes in station mode! * Add a _lot_ more debugging in the station beacon reset path. This is all quite fluid right now. * Modify the STA beacon programming code to try and take the TU gap between desired TSF and the target TU into account. (Lifted from QCA.) Tested: * AR5210 * AR5211 * AR5212 * AR5413 * AR5416 * AR9280 * AR9285 TODO: * More AP, IBSS, mesh, TDMA testing * Thorough AR9380 and later testing! * AR9160 and AR9287 testing Obtained from: QCA
2014-04-30 02:19:41 +00:00
*/
[if_ath] Don't update the beacon bits from beacon frames in hostapd mode. This logic is running the beacon receive bits in STA+AP mode on both the STA and AP side. The STA side sees its beacons from the BSS fine; the AP side is seeing other beacons on the same channel but with the BSS node for some odd reason. (I think it's a valid reason, but I currently forget what that valid reason is.) So, just to be cleaner about things, don't run the nexttbtt/etc bits at all if we're in hostap mode. If I ever get mesh working then maybe I'll make sure it works right on mesh+ap and mesh+sta modes. Whilst here, log the VAP i'm being called on to make it clearer what is going on. I may end up adding a VAP dprintf version of this at some point. Tested: * AR9380, STA (DWDS client) + hostap on the same NIC
2020-06-07 05:08:44 +00:00
if ((vap->iv_opmode != IEEE80211_M_HOSTAP) &&
IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid)) {
[ath] Only process beacon frames for the IBSS/BSSID if appropriate. * Don't use arbitrary frames for the average RX RSSI - only frames from the current BSSID * Don't log / do the syncbeacon logic for another BSSID and definitely don't do the syncbeacon call if we miss beacons outside of STA mode. * Don't do the IBSS merge bits if the current node plainly won't ever match our current BSS (ie, the IBSS doesn't have to match, but all the same bits that we check in ieee80211_ibss_merge() have to match.) Tested: * ath(4), AR9380, IBSS mode, surrounded by a lot of IBSS 11ac networks. Sponsored by: Eva Automation, Inc.
2016-04-09 00:58:38 +00:00
/* update rssi statistics for use by the hal */
/* XXX unlocked check against vap->iv_bss? */
ATH_RSSI_LPF(sc->sc_halstats.ns_avgbrssi, rssi);
Bring over some initial power save management support, reset path fixes and beacon programming / debugging into the ath(4) driver. The basic power save tracking: * Add some new code to track the current desired powersave state; and * Add some reference count tracking so we know when the NIC is awake; then * Add code in all the points where we're about to touch the hardware and push it to force-wake. Then, how things are moved into power save: * Only move into network-sleep during a RUN->SLEEP transition; * Force wake the hardware up everywhere that we're about to touch the hardware. The net80211 stack takes care of doing RUN<->SLEEP<->(other) state transitions so we don't have to do it in the driver. Next, when to wake things up: * In short - everywhere we touch the hardware. * The hardware will take care of staying awake if things are queued in the transmit queue(s); it'll then transit down to sleep if there's nothing left. This way we don't have to track the software / hardware transmit queue(s) and keep the hardware awake for those. Then, some transmit path fixes that aren't related but useful: * Force EAPOL frames to go out at the lowest rate. This improves reliability during the encryption handshake after 802.11 negotiation. Next, some reset path fixes! * Fix the overlap between reset and transmit pause so we don't transmit frames during a reset. * Some noisy environments will end up taking a lot longer to reset than normal, so extend the reset period and drop the raise the reset interval to be more realistic and give the hardware some time to finish calibration. * Skip calibration during the reset path. Tsk! Then, beacon fixes in station mode! * Add a _lot_ more debugging in the station beacon reset path. This is all quite fluid right now. * Modify the STA beacon programming code to try and take the TU gap between desired TSF and the target TU into account. (Lifted from QCA.) Tested: * AR5210 * AR5211 * AR5212 * AR5413 * AR5416 * AR9280 * AR9285 TODO: * More AP, IBSS, mesh, TDMA testing * Thorough AR9380 and later testing! * AR9160 and AR9287 testing Obtained from: QCA
2014-04-30 02:19:41 +00:00
net80211: replace internal LE_READ_*/LE_WRITE_* macro with system le*dec / le*enc functions. Replace net80211 specific macros with system-wide bytestream encoding/decoding functions: - LE_READ_2 -> le16dec - LE_READ_4 -> le32dec - LE_WRITE_2 -> le16enc - LE_WRITE_4 -> le32enc + drop ieee80211_input.h include, where it was included for these operations only. Reviewed by: adrian Differential Revision: https://reviews.freebsd.org/D6030
2016-04-20 18:29:30 +00:00
tsf_beacon = ((uint64_t) le32dec(ni->ni_tstamp.data + 4)) << 32;
tsf_beacon |= le32dec(ni->ni_tstamp.data);
Bring over some initial power save management support, reset path fixes and beacon programming / debugging into the ath(4) driver. The basic power save tracking: * Add some new code to track the current desired powersave state; and * Add some reference count tracking so we know when the NIC is awake; then * Add code in all the points where we're about to touch the hardware and push it to force-wake. Then, how things are moved into power save: * Only move into network-sleep during a RUN->SLEEP transition; * Force wake the hardware up everywhere that we're about to touch the hardware. The net80211 stack takes care of doing RUN<->SLEEP<->(other) state transitions so we don't have to do it in the driver. Next, when to wake things up: * In short - everywhere we touch the hardware. * The hardware will take care of staying awake if things are queued in the transmit queue(s); it'll then transit down to sleep if there's nothing left. This way we don't have to track the software / hardware transmit queue(s) and keep the hardware awake for those. Then, some transmit path fixes that aren't related but useful: * Force EAPOL frames to go out at the lowest rate. This improves reliability during the encryption handshake after 802.11 negotiation. Next, some reset path fixes! * Fix the overlap between reset and transmit pause so we don't transmit frames during a reset. * Some noisy environments will end up taking a lot longer to reset than normal, so extend the reset period and drop the raise the reset interval to be more realistic and give the hardware some time to finish calibration. * Skip calibration during the reset path. Tsk! Then, beacon fixes in station mode! * Add a _lot_ more debugging in the station beacon reset path. This is all quite fluid right now. * Modify the STA beacon programming code to try and take the TU gap between desired TSF and the target TU into account. (Lifted from QCA.) Tested: * AR5210 * AR5211 * AR5212 * AR5413 * AR5416 * AR9280 * AR9285 TODO: * More AP, IBSS, mesh, TDMA testing * Thorough AR9380 and later testing! * AR9160 and AR9287 testing Obtained from: QCA
2014-04-30 02:19:41 +00:00
[ath] Only process beacon frames for the IBSS/BSSID if appropriate. * Don't use arbitrary frames for the average RX RSSI - only frames from the current BSSID * Don't log / do the syncbeacon logic for another BSSID and definitely don't do the syncbeacon call if we miss beacons outside of STA mode. * Don't do the IBSS merge bits if the current node plainly won't ever match our current BSS (ie, the IBSS doesn't have to match, but all the same bits that we check in ieee80211_ibss_merge() have to match.) Tested: * ath(4), AR9380, IBSS mode, surrounded by a lot of IBSS 11ac networks. Sponsored by: Eva Automation, Inc.
2016-04-09 00:58:38 +00:00
nexttbtt = ath_hal_getnexttbtt(sc->sc_ah);
Bring over some initial power save management support, reset path fixes and beacon programming / debugging into the ath(4) driver. The basic power save tracking: * Add some new code to track the current desired powersave state; and * Add some reference count tracking so we know when the NIC is awake; then * Add code in all the points where we're about to touch the hardware and push it to force-wake. Then, how things are moved into power save: * Only move into network-sleep during a RUN->SLEEP transition; * Force wake the hardware up everywhere that we're about to touch the hardware. The net80211 stack takes care of doing RUN<->SLEEP<->(other) state transitions so we don't have to do it in the driver. Next, when to wake things up: * In short - everywhere we touch the hardware. * The hardware will take care of staying awake if things are queued in the transmit queue(s); it'll then transit down to sleep if there's nothing left. This way we don't have to track the software / hardware transmit queue(s) and keep the hardware awake for those. Then, some transmit path fixes that aren't related but useful: * Force EAPOL frames to go out at the lowest rate. This improves reliability during the encryption handshake after 802.11 negotiation. Next, some reset path fixes! * Fix the overlap between reset and transmit pause so we don't transmit frames during a reset. * Some noisy environments will end up taking a lot longer to reset than normal, so extend the reset period and drop the raise the reset interval to be more realistic and give the hardware some time to finish calibration. * Skip calibration during the reset path. Tsk! Then, beacon fixes in station mode! * Add a _lot_ more debugging in the station beacon reset path. This is all quite fluid right now. * Modify the STA beacon programming code to try and take the TU gap between desired TSF and the target TU into account. (Lifted from QCA.) Tested: * AR5210 * AR5211 * AR5212 * AR5413 * AR5416 * AR9280 * AR9285 TODO: * More AP, IBSS, mesh, TDMA testing * Thorough AR9380 and later testing! * AR9160 and AR9287 testing Obtained from: QCA
2014-04-30 02:19:41 +00:00
[ath] Only process beacon frames for the IBSS/BSSID if appropriate. * Don't use arbitrary frames for the average RX RSSI - only frames from the current BSSID * Don't log / do the syncbeacon logic for another BSSID and definitely don't do the syncbeacon call if we miss beacons outside of STA mode. * Don't do the IBSS merge bits if the current node plainly won't ever match our current BSS (ie, the IBSS doesn't have to match, but all the same bits that we check in ieee80211_ibss_merge() have to match.) Tested: * ath(4), AR9380, IBSS mode, surrounded by a lot of IBSS 11ac networks. Sponsored by: Eva Automation, Inc.
2016-04-09 00:58:38 +00:00
/*
* Let's calculate the delta and remainder, so we can see
* if the beacon timer from the AP is varying by more than
* a few TU. (Which would be a huge, huge problem.)
*/
tsf_delta = (long long) tsf_beacon - (long long) tsf_beacon_old;
tsf_delta_bmiss = tsf_delta / tsf_intval;
/*
* If our delta is greater than half the beacon interval,
* let's round the bmiss value up to the next beacon
* interval. Ie, we're running really, really early
* on the next beacon.
*/
if (tsf_delta % tsf_intval > (tsf_intval / 2))
tsf_delta_bmiss ++;
tsf_beacon_target = tsf_beacon_old +
(((unsigned long long) tsf_delta_bmiss) * (long long) tsf_intval);
Bring over some initial power save management support, reset path fixes and beacon programming / debugging into the ath(4) driver. The basic power save tracking: * Add some new code to track the current desired powersave state; and * Add some reference count tracking so we know when the NIC is awake; then * Add code in all the points where we're about to touch the hardware and push it to force-wake. Then, how things are moved into power save: * Only move into network-sleep during a RUN->SLEEP transition; * Force wake the hardware up everywhere that we're about to touch the hardware. The net80211 stack takes care of doing RUN<->SLEEP<->(other) state transitions so we don't have to do it in the driver. Next, when to wake things up: * In short - everywhere we touch the hardware. * The hardware will take care of staying awake if things are queued in the transmit queue(s); it'll then transit down to sleep if there's nothing left. This way we don't have to track the software / hardware transmit queue(s) and keep the hardware awake for those. Then, some transmit path fixes that aren't related but useful: * Force EAPOL frames to go out at the lowest rate. This improves reliability during the encryption handshake after 802.11 negotiation. Next, some reset path fixes! * Fix the overlap between reset and transmit pause so we don't transmit frames during a reset. * Some noisy environments will end up taking a lot longer to reset than normal, so extend the reset period and drop the raise the reset interval to be more realistic and give the hardware some time to finish calibration. * Skip calibration during the reset path. Tsk! Then, beacon fixes in station mode! * Add a _lot_ more debugging in the station beacon reset path. This is all quite fluid right now. * Modify the STA beacon programming code to try and take the TU gap between desired TSF and the target TU into account. (Lifted from QCA.) Tested: * AR5210 * AR5211 * AR5212 * AR5413 * AR5416 * AR9280 * AR9285 TODO: * More AP, IBSS, mesh, TDMA testing * Thorough AR9380 and later testing! * AR9160 and AR9287 testing Obtained from: QCA
2014-04-30 02:19:41 +00:00
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
/*
[ath] Only process beacon frames for the IBSS/BSSID if appropriate. * Don't use arbitrary frames for the average RX RSSI - only frames from the current BSSID * Don't log / do the syncbeacon logic for another BSSID and definitely don't do the syncbeacon call if we miss beacons outside of STA mode. * Don't do the IBSS merge bits if the current node plainly won't ever match our current BSS (ie, the IBSS doesn't have to match, but all the same bits that we check in ieee80211_ibss_merge() have to match.) Tested: * ath(4), AR9380, IBSS mode, surrounded by a lot of IBSS 11ac networks. Sponsored by: Eva Automation, Inc.
2016-04-09 00:58:38 +00:00
* The remainder using '%' is between 0 .. intval-1.
* If we're actually running too fast, then the remainder
* will be some large number just under intval-1.
* So we need to look at whether we're running
* before or after the target beacon interval
* and if we are, modify how we do the remainder
* calculation.
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
*/
[ath] Only process beacon frames for the IBSS/BSSID if appropriate. * Don't use arbitrary frames for the average RX RSSI - only frames from the current BSSID * Don't log / do the syncbeacon logic for another BSSID and definitely don't do the syncbeacon call if we miss beacons outside of STA mode. * Don't do the IBSS merge bits if the current node plainly won't ever match our current BSS (ie, the IBSS doesn't have to match, but all the same bits that we check in ieee80211_ibss_merge() have to match.) Tested: * ath(4), AR9380, IBSS mode, surrounded by a lot of IBSS 11ac networks. Sponsored by: Eva Automation, Inc.
2016-04-09 00:58:38 +00:00
if (tsf_beacon < tsf_beacon_target) {
tsf_remainder =
-(tsf_intval - ((tsf_beacon - tsf_beacon_old) % tsf_intval));
} else {
tsf_remainder = (tsf_beacon - tsf_beacon_old) % tsf_intval;
}
[if_ath] Don't update the beacon bits from beacon frames in hostapd mode. This logic is running the beacon receive bits in STA+AP mode on both the STA and AP side. The STA side sees its beacons from the BSS fine; the AP side is seeing other beacons on the same channel but with the BSS node for some odd reason. (I think it's a valid reason, but I currently forget what that valid reason is.) So, just to be cleaner about things, don't run the nexttbtt/etc bits at all if we're in hostap mode. If I ever get mesh working then maybe I'll make sure it works right on mesh+ap and mesh+sta modes. Whilst here, log the VAP i'm being called on to make it clearer what is going on. I may end up adding a VAP dprintf version of this at some point. Tested: * AR9380, STA (DWDS client) + hostap on the same NIC
2020-06-07 05:08:44 +00:00
DPRINTF(sc, ATH_DEBUG_BEACON, "%s: %s: old_tsf=%llu (%u), new_tsf=%llu (%u), target_tsf=%llu (%u), delta=%lld, bmiss=%d, remainder=%d\n",
[ath] Only process beacon frames for the IBSS/BSSID if appropriate. * Don't use arbitrary frames for the average RX RSSI - only frames from the current BSSID * Don't log / do the syncbeacon logic for another BSSID and definitely don't do the syncbeacon call if we miss beacons outside of STA mode. * Don't do the IBSS merge bits if the current node plainly won't ever match our current BSS (ie, the IBSS doesn't have to match, but all the same bits that we check in ieee80211_ibss_merge() have to match.) Tested: * ath(4), AR9380, IBSS mode, surrounded by a lot of IBSS 11ac networks. Sponsored by: Eva Automation, Inc.
2016-04-09 00:58:38 +00:00
__func__,
[if_ath] Don't update the beacon bits from beacon frames in hostapd mode. This logic is running the beacon receive bits in STA+AP mode on both the STA and AP side. The STA side sees its beacons from the BSS fine; the AP side is seeing other beacons on the same channel but with the BSS node for some odd reason. (I think it's a valid reason, but I currently forget what that valid reason is.) So, just to be cleaner about things, don't run the nexttbtt/etc bits at all if we're in hostap mode. If I ever get mesh working then maybe I'll make sure it works right on mesh+ap and mesh+sta modes. Whilst here, log the VAP i'm being called on to make it clearer what is going on. I may end up adding a VAP dprintf version of this at some point. Tested: * AR9380, STA (DWDS client) + hostap on the same NIC
2020-06-07 05:08:44 +00:00
ieee80211_get_vap_ifname(vap),
[ath] Only process beacon frames for the IBSS/BSSID if appropriate. * Don't use arbitrary frames for the average RX RSSI - only frames from the current BSSID * Don't log / do the syncbeacon logic for another BSSID and definitely don't do the syncbeacon call if we miss beacons outside of STA mode. * Don't do the IBSS merge bits if the current node plainly won't ever match our current BSS (ie, the IBSS doesn't have to match, but all the same bits that we check in ieee80211_ibss_merge() have to match.) Tested: * ath(4), AR9380, IBSS mode, surrounded by a lot of IBSS 11ac networks. Sponsored by: Eva Automation, Inc.
2016-04-09 00:58:38 +00:00
(unsigned long long) tsf_beacon_old,
[ath] include logging of TU versions of the TSF values. The beacon programming side of things deals in TUs and 1/8th TUs, so it's good to se the TU value here when debugging beaconing issues.
2016-11-28 02:51:55 +00:00
(unsigned int) (tsf_beacon_old >> 10),
[ath] Only process beacon frames for the IBSS/BSSID if appropriate. * Don't use arbitrary frames for the average RX RSSI - only frames from the current BSSID * Don't log / do the syncbeacon logic for another BSSID and definitely don't do the syncbeacon call if we miss beacons outside of STA mode. * Don't do the IBSS merge bits if the current node plainly won't ever match our current BSS (ie, the IBSS doesn't have to match, but all the same bits that we check in ieee80211_ibss_merge() have to match.) Tested: * ath(4), AR9380, IBSS mode, surrounded by a lot of IBSS 11ac networks. Sponsored by: Eva Automation, Inc.
2016-04-09 00:58:38 +00:00
(unsigned long long) tsf_beacon,
[ath] include logging of TU versions of the TSF values. The beacon programming side of things deals in TUs and 1/8th TUs, so it's good to se the TU value here when debugging beaconing issues.
2016-11-28 02:51:55 +00:00
(unsigned int ) (tsf_beacon >> 10),
[ath] Only process beacon frames for the IBSS/BSSID if appropriate. * Don't use arbitrary frames for the average RX RSSI - only frames from the current BSSID * Don't log / do the syncbeacon logic for another BSSID and definitely don't do the syncbeacon call if we miss beacons outside of STA mode. * Don't do the IBSS merge bits if the current node plainly won't ever match our current BSS (ie, the IBSS doesn't have to match, but all the same bits that we check in ieee80211_ibss_merge() have to match.) Tested: * ath(4), AR9380, IBSS mode, surrounded by a lot of IBSS 11ac networks. Sponsored by: Eva Automation, Inc.
2016-04-09 00:58:38 +00:00
(unsigned long long) tsf_beacon_target,
[ath] include logging of TU versions of the TSF values. The beacon programming side of things deals in TUs and 1/8th TUs, so it's good to se the TU value here when debugging beaconing issues.
2016-11-28 02:51:55 +00:00
(unsigned int) (tsf_beacon_target >> 10),
[ath] Only process beacon frames for the IBSS/BSSID if appropriate. * Don't use arbitrary frames for the average RX RSSI - only frames from the current BSSID * Don't log / do the syncbeacon logic for another BSSID and definitely don't do the syncbeacon call if we miss beacons outside of STA mode. * Don't do the IBSS merge bits if the current node plainly won't ever match our current BSS (ie, the IBSS doesn't have to match, but all the same bits that we check in ieee80211_ibss_merge() have to match.) Tested: * ath(4), AR9380, IBSS mode, surrounded by a lot of IBSS 11ac networks. Sponsored by: Eva Automation, Inc.
2016-04-09 00:58:38 +00:00
(long long) tsf_delta,
tsf_delta_bmiss,
tsf_remainder);
[if_ath] Don't update the beacon bits from beacon frames in hostapd mode. This logic is running the beacon receive bits in STA+AP mode on both the STA and AP side. The STA side sees its beacons from the BSS fine; the AP side is seeing other beacons on the same channel but with the BSS node for some odd reason. (I think it's a valid reason, but I currently forget what that valid reason is.) So, just to be cleaner about things, don't run the nexttbtt/etc bits at all if we're in hostap mode. If I ever get mesh working then maybe I'll make sure it works right on mesh+ap and mesh+sta modes. Whilst here, log the VAP i'm being called on to make it clearer what is going on. I may end up adding a VAP dprintf version of this at some point. Tested: * AR9380, STA (DWDS client) + hostap on the same NIC
2020-06-07 05:08:44 +00:00
DPRINTF(sc, ATH_DEBUG_BEACON, "%s: %s: ni=%6D bssid=%6D tsf=%llu (%u), nexttbtt=%llu (%u), delta=%d\n",
[ath] Only process beacon frames for the IBSS/BSSID if appropriate. * Don't use arbitrary frames for the average RX RSSI - only frames from the current BSSID * Don't log / do the syncbeacon logic for another BSSID and definitely don't do the syncbeacon call if we miss beacons outside of STA mode. * Don't do the IBSS merge bits if the current node plainly won't ever match our current BSS (ie, the IBSS doesn't have to match, but all the same bits that we check in ieee80211_ibss_merge() have to match.) Tested: * ath(4), AR9380, IBSS mode, surrounded by a lot of IBSS 11ac networks. Sponsored by: Eva Automation, Inc.
2016-04-09 00:58:38 +00:00
__func__,
[if_ath] Don't update the beacon bits from beacon frames in hostapd mode. This logic is running the beacon receive bits in STA+AP mode on both the STA and AP side. The STA side sees its beacons from the BSS fine; the AP side is seeing other beacons on the same channel but with the BSS node for some odd reason. (I think it's a valid reason, but I currently forget what that valid reason is.) So, just to be cleaner about things, don't run the nexttbtt/etc bits at all if we're in hostap mode. If I ever get mesh working then maybe I'll make sure it works right on mesh+ap and mesh+sta modes. Whilst here, log the VAP i'm being called on to make it clearer what is going on. I may end up adding a VAP dprintf version of this at some point. Tested: * AR9380, STA (DWDS client) + hostap on the same NIC
2020-06-07 05:08:44 +00:00
ieee80211_get_vap_ifname(vap),
ni->ni_bssid, ":",
vap->iv_bss->ni_bssid, ":",
[ath] Only process beacon frames for the IBSS/BSSID if appropriate. * Don't use arbitrary frames for the average RX RSSI - only frames from the current BSSID * Don't log / do the syncbeacon logic for another BSSID and definitely don't do the syncbeacon call if we miss beacons outside of STA mode. * Don't do the IBSS merge bits if the current node plainly won't ever match our current BSS (ie, the IBSS doesn't have to match, but all the same bits that we check in ieee80211_ibss_merge() have to match.) Tested: * ath(4), AR9380, IBSS mode, surrounded by a lot of IBSS 11ac networks. Sponsored by: Eva Automation, Inc.
2016-04-09 00:58:38 +00:00
(unsigned long long) tsf_beacon,
[ath] include logging of TU versions of the TSF values. The beacon programming side of things deals in TUs and 1/8th TUs, so it's good to se the TU value here when debugging beaconing issues.
2016-11-28 02:51:55 +00:00
(unsigned int) (tsf_beacon >> 10),
[ath] Only process beacon frames for the IBSS/BSSID if appropriate. * Don't use arbitrary frames for the average RX RSSI - only frames from the current BSSID * Don't log / do the syncbeacon logic for another BSSID and definitely don't do the syncbeacon call if we miss beacons outside of STA mode. * Don't do the IBSS merge bits if the current node plainly won't ever match our current BSS (ie, the IBSS doesn't have to match, but all the same bits that we check in ieee80211_ibss_merge() have to match.) Tested: * ath(4), AR9380, IBSS mode, surrounded by a lot of IBSS 11ac networks. Sponsored by: Eva Automation, Inc.
2016-04-09 00:58:38 +00:00
(unsigned long long) nexttbtt,
[ath] include logging of TU versions of the TSF values. The beacon programming side of things deals in TUs and 1/8th TUs, so it's good to se the TU value here when debugging beaconing issues.
2016-11-28 02:51:55 +00:00
(unsigned int) (nexttbtt >> 10),
[ath] Only process beacon frames for the IBSS/BSSID if appropriate. * Don't use arbitrary frames for the average RX RSSI - only frames from the current BSSID * Don't log / do the syncbeacon logic for another BSSID and definitely don't do the syncbeacon call if we miss beacons outside of STA mode. * Don't do the IBSS merge bits if the current node plainly won't ever match our current BSS (ie, the IBSS doesn't have to match, but all the same bits that we check in ieee80211_ibss_merge() have to match.) Tested: * ath(4), AR9380, IBSS mode, surrounded by a lot of IBSS 11ac networks. Sponsored by: Eva Automation, Inc.
2016-04-09 00:58:38 +00:00
(int32_t) tsf_beacon - (int32_t) nexttbtt + tsf_intval);
[ath] Don't re-program the beacon timers if we miss a beacon in software-beacon STA mode. This is something I added a few years ago to handle resyncing the beacon if we miss a beacon or need to sync after association/reassociation/powersave. However, if we're doing STA+AP mode (eg DWDS) then we don't want to reprogram the beacons here; this may upset normal AP operation. I missed checking for the sc->sc_swbmiss flag so I was reinitialising the beacon timers after every beacon miss / TSFOOR option, and that isn't likely good. This plus ensuring that STA's are created with "-beacon" to disable BMISS/TSFOOR processing will hopefully quieten some of the issues I've seen with missed beacons / TSFOOR (out of range) interrupts coming in when operating in STA mode. Tested: * AR9380/AR9580, STA+AP modes
2020-06-01 06:10:25 +00:00
/*
* We only do syncbeacon on STA VAPs; not on IBSS;
* but don't do it with swbmiss enabled or we
* may end up overwriting AP mode beacon config.
*
* The driver (and net80211) should be smarter about
* this..
*/
[ath] Only process beacon frames for the IBSS/BSSID if appropriate. * Don't use arbitrary frames for the average RX RSSI - only frames from the current BSSID * Don't log / do the syncbeacon logic for another BSSID and definitely don't do the syncbeacon call if we miss beacons outside of STA mode. * Don't do the IBSS merge bits if the current node plainly won't ever match our current BSS (ie, the IBSS doesn't have to match, but all the same bits that we check in ieee80211_ibss_merge() have to match.) Tested: * ath(4), AR9380, IBSS mode, surrounded by a lot of IBSS 11ac networks. Sponsored by: Eva Automation, Inc.
2016-04-09 00:58:38 +00:00
if (vap->iv_opmode == IEEE80211_M_STA &&
sc->sc_syncbeacon &&
[ath] Don't re-program the beacon timers if we miss a beacon in software-beacon STA mode. This is something I added a few years ago to handle resyncing the beacon if we miss a beacon or need to sync after association/reassociation/powersave. However, if we're doing STA+AP mode (eg DWDS) then we don't want to reprogram the beacons here; this may upset normal AP operation. I missed checking for the sc->sc_swbmiss flag so I was reinitialising the beacon timers after every beacon miss / TSFOOR option, and that isn't likely good. This plus ensuring that STA's are created with "-beacon" to disable BMISS/TSFOOR processing will hopefully quieten some of the issues I've seen with missed beacons / TSFOOR (out of range) interrupts coming in when operating in STA mode. Tested: * AR9380/AR9580, STA+AP modes
2020-06-01 06:10:25 +00:00
(!sc->sc_swbmiss) &&
[ath] Only process beacon frames for the IBSS/BSSID if appropriate. * Don't use arbitrary frames for the average RX RSSI - only frames from the current BSSID * Don't log / do the syncbeacon logic for another BSSID and definitely don't do the syncbeacon call if we miss beacons outside of STA mode. * Don't do the IBSS merge bits if the current node plainly won't ever match our current BSS (ie, the IBSS doesn't have to match, but all the same bits that we check in ieee80211_ibss_merge() have to match.) Tested: * ath(4), AR9380, IBSS mode, surrounded by a lot of IBSS 11ac networks. Sponsored by: Eva Automation, Inc.
2016-04-09 00:58:38 +00:00
ni == vap->iv_bss &&
(vap->iv_state == IEEE80211_S_RUN || vap->iv_state == IEEE80211_S_SLEEP)) {
DPRINTF(sc, ATH_DEBUG_BEACON,
"%s: syncbeacon=1; syncing\n",
__func__);
/*
* Resync beacon timers using the tsf of the beacon
* frame we just received.
*/
ath_beacon_config(sc, vap);
sc->sc_syncbeacon = 0;
}
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
}
Bring over some initial power save management support, reset path fixes and beacon programming / debugging into the ath(4) driver. The basic power save tracking: * Add some new code to track the current desired powersave state; and * Add some reference count tracking so we know when the NIC is awake; then * Add code in all the points where we're about to touch the hardware and push it to force-wake. Then, how things are moved into power save: * Only move into network-sleep during a RUN->SLEEP transition; * Force wake the hardware up everywhere that we're about to touch the hardware. The net80211 stack takes care of doing RUN<->SLEEP<->(other) state transitions so we don't have to do it in the driver. Next, when to wake things up: * In short - everywhere we touch the hardware. * The hardware will take care of staying awake if things are queued in the transmit queue(s); it'll then transit down to sleep if there's nothing left. This way we don't have to track the software / hardware transmit queue(s) and keep the hardware awake for those. Then, some transmit path fixes that aren't related but useful: * Force EAPOL frames to go out at the lowest rate. This improves reliability during the encryption handshake after 802.11 negotiation. Next, some reset path fixes! * Fix the overlap between reset and transmit pause so we don't transmit frames during a reset. * Some noisy environments will end up taking a lot longer to reset than normal, so extend the reset period and drop the raise the reset interval to be more realistic and give the hardware some time to finish calibration. * Skip calibration during the reset path. Tsk! Then, beacon fixes in station mode! * Add a _lot_ more debugging in the station beacon reset path. This is all quite fluid right now. * Modify the STA beacon programming code to try and take the TU gap between desired TSF and the target TU into account. (Lifted from QCA.) Tested: * AR5210 * AR5211 * AR5212 * AR5413 * AR5416 * AR9280 * AR9285 TODO: * More AP, IBSS, mesh, TDMA testing * Thorough AR9380 and later testing! * AR9160 and AR9287 testing Obtained from: QCA
2014-04-30 02:19:41 +00:00
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
/* fall thru... */
case IEEE80211_FC0_SUBTYPE_PROBE_RESP:
if (vap->iv_opmode == IEEE80211_M_IBSS &&
[ath] Only process beacon frames for the IBSS/BSSID if appropriate. * Don't use arbitrary frames for the average RX RSSI - only frames from the current BSSID * Don't log / do the syncbeacon logic for another BSSID and definitely don't do the syncbeacon call if we miss beacons outside of STA mode. * Don't do the IBSS merge bits if the current node plainly won't ever match our current BSS (ie, the IBSS doesn't have to match, but all the same bits that we check in ieee80211_ibss_merge() have to match.) Tested: * ath(4), AR9380, IBSS mode, surrounded by a lot of IBSS 11ac networks. Sponsored by: Eva Automation, Inc.
2016-04-09 00:58:38 +00:00
vap->iv_state == IEEE80211_S_RUN &&
ieee80211_ibss_merge_check(ni)) {
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
uint32_t rstamp = sc->sc_lastrs->rs_tstamp;
uint64_t tsf = ath_extend_tsf(sc, rstamp,
ath_hal_gettsf64(sc->sc_ah));
/*
* Handle ibss merge as needed; check the tsf on the
* frame before attempting the merge. The 802.11 spec
* says the station should change it's bssid to match
* the oldest station with the same ssid, where oldest
* is determined by the tsf. Note that hardware
* reconfiguration happens through callback to
* ath_newstate as the state machine will go from
* RUN -> RUN when this happens.
*/
if (le64toh(ni->ni_tstamp.tsf) >= tsf) {
DPRINTF(sc, ATH_DEBUG_STATE,
"ibss merge, rstamp %u tsf %ju "
"tstamp %ju\n", rstamp, (uintmax_t)tsf,
(uintmax_t)ni->ni_tstamp.tsf);
(void) ieee80211_ibss_merge(ni);
}
}
break;
}
}
Introduce an optional ath(4) radiotap vendor extension. This includes a few new fields in each RXed frame: * per chain RX RSSI (ctl and ext); * current RX chainmask; * EVM information; * PHY error code; * basic RX status bits (CRC error, PHY error, etc). This is primarily to allow me to do some userland PHY error processing for radar and spectral scan data. However since EVM and per-chain RSSI is provided, others may find it useful for a variety of tasks. The default is to not compile in the radiotap vendor extensions, primarily because tcpdump doesn't seem to handle the particular vendor extension layout I'm using, and I'd rather not break existing code out there that may be (badly) parsing the radiotap data. Instead, add the option 'ATH_ENABLE_RADIOTAP_VENDOR_EXT' to your kernel configuration file to enable these options.
2012-06-24 07:01:49 +00:00
#ifdef ATH_ENABLE_RADIOTAP_VENDOR_EXT
static void
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
ath_rx_tap_vendor(struct ath_softc *sc, struct mbuf *m,
Introduce an optional ath(4) radiotap vendor extension. This includes a few new fields in each RXed frame: * per chain RX RSSI (ctl and ext); * current RX chainmask; * EVM information; * PHY error code; * basic RX status bits (CRC error, PHY error, etc). This is primarily to allow me to do some userland PHY error processing for radar and spectral scan data. However since EVM and per-chain RSSI is provided, others may find it useful for a variety of tasks. The default is to not compile in the radiotap vendor extensions, primarily because tcpdump doesn't seem to handle the particular vendor extension layout I'm using, and I'd rather not break existing code out there that may be (badly) parsing the radiotap data. Instead, add the option 'ATH_ENABLE_RADIOTAP_VENDOR_EXT' to your kernel configuration file to enable these options.
2012-06-24 07:01:49 +00:00
const struct ath_rx_status *rs, u_int64_t tsf, int16_t nf)
{
/* Fill in the extension bitmap */
sc->sc_rx_th.wr_ext_bitmap = htole32(1 << ATH_RADIOTAP_VENDOR_HEADER);
/* Fill in the vendor header */
sc->sc_rx_th.wr_vh.vh_oui[0] = 0x7f;
sc->sc_rx_th.wr_vh.vh_oui[1] = 0x03;
sc->sc_rx_th.wr_vh.vh_oui[2] = 0x00;
/* XXX what should this be? */
sc->sc_rx_th.wr_vh.vh_sub_ns = 0;
sc->sc_rx_th.wr_vh.vh_skip_len =
htole16(sizeof(struct ath_radiotap_vendor_hdr));
/* General version info */
sc->sc_rx_th.wr_v.vh_version = 1;
sc->sc_rx_th.wr_v.vh_rx_chainmask = sc->sc_rxchainmask;
/* rssi */
sc->sc_rx_th.wr_v.rssi_ctl[0] = rs->rs_rssi_ctl[0];
sc->sc_rx_th.wr_v.rssi_ctl[1] = rs->rs_rssi_ctl[1];
sc->sc_rx_th.wr_v.rssi_ctl[2] = rs->rs_rssi_ctl[2];
sc->sc_rx_th.wr_v.rssi_ext[0] = rs->rs_rssi_ext[0];
sc->sc_rx_th.wr_v.rssi_ext[1] = rs->rs_rssi_ext[1];
sc->sc_rx_th.wr_v.rssi_ext[2] = rs->rs_rssi_ext[2];
/* evm */
sc->sc_rx_th.wr_v.evm[0] = rs->rs_evm0;
sc->sc_rx_th.wr_v.evm[1] = rs->rs_evm1;
sc->sc_rx_th.wr_v.evm[2] = rs->rs_evm2;
Add three-stream EVM values.
2013-03-11 04:19:10 +00:00
/* These are only populated from the AR9300 or later */
sc->sc_rx_th.wr_v.evm[3] = rs->rs_evm3;
sc->sc_rx_th.wr_v.evm[4] = rs->rs_evm4;
Introduce an optional ath(4) radiotap vendor extension. This includes a few new fields in each RXed frame: * per chain RX RSSI (ctl and ext); * current RX chainmask; * EVM information; * PHY error code; * basic RX status bits (CRC error, PHY error, etc). This is primarily to allow me to do some userland PHY error processing for radar and spectral scan data. However since EVM and per-chain RSSI is provided, others may find it useful for a variety of tasks. The default is to not compile in the radiotap vendor extensions, primarily because tcpdump doesn't seem to handle the particular vendor extension layout I'm using, and I'd rather not break existing code out there that may be (badly) parsing the radiotap data. Instead, add the option 'ATH_ENABLE_RADIOTAP_VENDOR_EXT' to your kernel configuration file to enable these options.
2012-06-24 07:01:49 +00:00
Add a few new fields to the RX vendor radiotap header: * a flags field that lets me know what's going on; * the hardware ratecode, unmolested by conversion to a bitrate; * the HAL rs_flags field, useful for debugging; * specifically mark aggregate sub-frames. This stuff sorely needs tidying up - it's missing some important stuff (eg numdelims) and it would be nice to put the flags at the beginning rather than at the end. Tested: * AR9380, STA mode, 2x2 HT40, monitoring RSSI and EVM values
2013-03-11 06:54:58 +00:00
/* direction */
sc->sc_rx_th.wr_v.vh_flags = ATH_VENDOR_PKT_RX;
/* RX rate */
sc->sc_rx_th.wr_v.vh_rx_hwrate = rs->rs_rate;
/* RX flags */
sc->sc_rx_th.wr_v.vh_rs_flags = rs->rs_flags;
if (rs->rs_isaggr)
sc->sc_rx_th.wr_v.vh_flags |= ATH_VENDOR_PKT_ISAGGR;
if (rs->rs_moreaggr)
sc->sc_rx_th.wr_v.vh_flags |= ATH_VENDOR_PKT_MOREAGGR;
Introduce an optional ath(4) radiotap vendor extension. This includes a few new fields in each RXed frame: * per chain RX RSSI (ctl and ext); * current RX chainmask; * EVM information; * PHY error code; * basic RX status bits (CRC error, PHY error, etc). This is primarily to allow me to do some userland PHY error processing for radar and spectral scan data. However since EVM and per-chain RSSI is provided, others may find it useful for a variety of tasks. The default is to not compile in the radiotap vendor extensions, primarily because tcpdump doesn't seem to handle the particular vendor extension layout I'm using, and I'd rather not break existing code out there that may be (badly) parsing the radiotap data. Instead, add the option 'ATH_ENABLE_RADIOTAP_VENDOR_EXT' to your kernel configuration file to enable these options.
2012-06-24 07:01:49 +00:00
/* phyerr info */
Add a few new fields to the RX vendor radiotap header: * a flags field that lets me know what's going on; * the hardware ratecode, unmolested by conversion to a bitrate; * the HAL rs_flags field, useful for debugging; * specifically mark aggregate sub-frames. This stuff sorely needs tidying up - it's missing some important stuff (eg numdelims) and it would be nice to put the flags at the beginning rather than at the end. Tested: * AR9380, STA mode, 2x2 HT40, monitoring RSSI and EVM values
2013-03-11 06:54:58 +00:00
if (rs->rs_status & HAL_RXERR_PHY) {
Introduce an optional ath(4) radiotap vendor extension. This includes a few new fields in each RXed frame: * per chain RX RSSI (ctl and ext); * current RX chainmask; * EVM information; * PHY error code; * basic RX status bits (CRC error, PHY error, etc). This is primarily to allow me to do some userland PHY error processing for radar and spectral scan data. However since EVM and per-chain RSSI is provided, others may find it useful for a variety of tasks. The default is to not compile in the radiotap vendor extensions, primarily because tcpdump doesn't seem to handle the particular vendor extension layout I'm using, and I'd rather not break existing code out there that may be (badly) parsing the radiotap data. Instead, add the option 'ATH_ENABLE_RADIOTAP_VENDOR_EXT' to your kernel configuration file to enable these options.
2012-06-24 07:01:49 +00:00
sc->sc_rx_th.wr_v.vh_phyerr_code = rs->rs_phyerr;
Add a few new fields to the RX vendor radiotap header: * a flags field that lets me know what's going on; * the hardware ratecode, unmolested by conversion to a bitrate; * the HAL rs_flags field, useful for debugging; * specifically mark aggregate sub-frames. This stuff sorely needs tidying up - it's missing some important stuff (eg numdelims) and it would be nice to put the flags at the beginning rather than at the end. Tested: * AR9380, STA mode, 2x2 HT40, monitoring RSSI and EVM values
2013-03-11 06:54:58 +00:00
sc->sc_rx_th.wr_v.vh_flags |= ATH_VENDOR_PKT_RXPHYERR;
} else {
Introduce an optional ath(4) radiotap vendor extension. This includes a few new fields in each RXed frame: * per chain RX RSSI (ctl and ext); * current RX chainmask; * EVM information; * PHY error code; * basic RX status bits (CRC error, PHY error, etc). This is primarily to allow me to do some userland PHY error processing for radar and spectral scan data. However since EVM and per-chain RSSI is provided, others may find it useful for a variety of tasks. The default is to not compile in the radiotap vendor extensions, primarily because tcpdump doesn't seem to handle the particular vendor extension layout I'm using, and I'd rather not break existing code out there that may be (badly) parsing the radiotap data. Instead, add the option 'ATH_ENABLE_RADIOTAP_VENDOR_EXT' to your kernel configuration file to enable these options.
2012-06-24 07:01:49 +00:00
sc->sc_rx_th.wr_v.vh_phyerr_code = 0xff;
Add a few new fields to the RX vendor radiotap header: * a flags field that lets me know what's going on; * the hardware ratecode, unmolested by conversion to a bitrate; * the HAL rs_flags field, useful for debugging; * specifically mark aggregate sub-frames. This stuff sorely needs tidying up - it's missing some important stuff (eg numdelims) and it would be nice to put the flags at the beginning rather than at the end. Tested: * AR9380, STA mode, 2x2 HT40, monitoring RSSI and EVM values
2013-03-11 06:54:58 +00:00
}
Introduce an optional ath(4) radiotap vendor extension. This includes a few new fields in each RXed frame: * per chain RX RSSI (ctl and ext); * current RX chainmask; * EVM information; * PHY error code; * basic RX status bits (CRC error, PHY error, etc). This is primarily to allow me to do some userland PHY error processing for radar and spectral scan data. However since EVM and per-chain RSSI is provided, others may find it useful for a variety of tasks. The default is to not compile in the radiotap vendor extensions, primarily because tcpdump doesn't seem to handle the particular vendor extension layout I'm using, and I'd rather not break existing code out there that may be (badly) parsing the radiotap data. Instead, add the option 'ATH_ENABLE_RADIOTAP_VENDOR_EXT' to your kernel configuration file to enable these options.
2012-06-24 07:01:49 +00:00
sc->sc_rx_th.wr_v.vh_rs_status = rs->rs_status;
sc->sc_rx_th.wr_v.vh_rssi = rs->rs_rssi;
}
#endif /* ATH_ENABLE_RADIOTAP_VENDOR_EXT */
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
static void
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
ath_rx_tap(struct ath_softc *sc, struct mbuf *m,
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
const struct ath_rx_status *rs, u_int64_t tsf, int16_t nf)
{
#define CHAN_HT20 htole32(IEEE80211_CHAN_HT20)
#define CHAN_HT40U htole32(IEEE80211_CHAN_HT40U)
#define CHAN_HT40D htole32(IEEE80211_CHAN_HT40D)
#define CHAN_HT (CHAN_HT20|CHAN_HT40U|CHAN_HT40D)
const HAL_RATE_TABLE *rt;
uint8_t rix;
rt = sc->sc_currates;
KASSERT(rt != NULL, ("no rate table, mode %u", sc->sc_curmode));
rix = rt->rateCodeToIndex[rs->rs_rate];
sc->sc_rx_th.wr_rate = sc->sc_hwmap[rix].ieeerate;
sc->sc_rx_th.wr_flags = sc->sc_hwmap[rix].rxflags;
[ath] [ath_hal] retire AH_SUPPORT_AR5416 changing anything. Yes, the memory bloat is large, but it's 2017 and I'll fix it later by making it runtime configurable / per-chip configurable if I ever need to.
2017-05-25 04:26:26 +00:00
/* 802.11 specific flags */
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
sc->sc_rx_th.wr_chan_flags &= ~CHAN_HT;
For PHY error frames, populate the configured channel flags rather than based on the received frame. PHY errors don't have the relevant HT or 40MHz MCS flag set.
2013-01-04 06:28:34 +00:00
if (rs->rs_status & HAL_RXERR_PHY) {
/*
* PHY error - make sure the channel flags
* reflect the actual channel configuration,
* not the received frame.
*/
Work around some rather unfortunate race conditions inside net80211. Right now, ic_curchan seems to be updated rather quickly (ie, during the ioctl) and before the driver gets notified of what's going on. So what I was seeing was: * NIC was in channel X; * It generates PHY errors for channel X; * an ioctl comes along from userland and changes things to channel Y; * .. this updates ic_curchan, but hasn't yet reset the hardware; * in parallel, RX is occuring and it looks at ic_curchan; * .. which is channel Y, so events get stamped with that now. Sigh.
2013-01-31 00:14:25 +00:00
if (IEEE80211_IS_CHAN_HT40U(sc->sc_curchan))
For PHY error frames, populate the configured channel flags rather than based on the received frame. PHY errors don't have the relevant HT or 40MHz MCS flag set.
2013-01-04 06:28:34 +00:00
sc->sc_rx_th.wr_chan_flags |= CHAN_HT40U;
Work around some rather unfortunate race conditions inside net80211. Right now, ic_curchan seems to be updated rather quickly (ie, during the ioctl) and before the driver gets notified of what's going on. So what I was seeing was: * NIC was in channel X; * It generates PHY errors for channel X; * an ioctl comes along from userland and changes things to channel Y; * .. this updates ic_curchan, but hasn't yet reset the hardware; * in parallel, RX is occuring and it looks at ic_curchan; * .. which is channel Y, so events get stamped with that now. Sigh.
2013-01-31 00:14:25 +00:00
else if (IEEE80211_IS_CHAN_HT40D(sc->sc_curchan))
For PHY error frames, populate the configured channel flags rather than based on the received frame. PHY errors don't have the relevant HT or 40MHz MCS flag set.
2013-01-04 06:28:34 +00:00
sc->sc_rx_th.wr_chan_flags |= CHAN_HT40D;
Work around some rather unfortunate race conditions inside net80211. Right now, ic_curchan seems to be updated rather quickly (ie, during the ioctl) and before the driver gets notified of what's going on. So what I was seeing was: * NIC was in channel X; * It generates PHY errors for channel X; * an ioctl comes along from userland and changes things to channel Y; * .. this updates ic_curchan, but hasn't yet reset the hardware; * in parallel, RX is occuring and it looks at ic_curchan; * .. which is channel Y, so events get stamped with that now. Sigh.
2013-01-31 00:14:25 +00:00
else if (IEEE80211_IS_CHAN_HT20(sc->sc_curchan))
For PHY error frames, populate the configured channel flags rather than based on the received frame. PHY errors don't have the relevant HT or 40MHz MCS flag set.
2013-01-04 06:28:34 +00:00
sc->sc_rx_th.wr_chan_flags |= CHAN_HT20;
} else if (sc->sc_rx_th.wr_rate & IEEE80211_RATE_MCS) { /* HT rate */
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
struct ieee80211com *ic = &sc->sc_ic;
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
if ((rs->rs_flags & HAL_RX_2040) == 0)
sc->sc_rx_th.wr_chan_flags |= CHAN_HT20;
else if (IEEE80211_IS_CHAN_HT40U(ic->ic_curchan))
sc->sc_rx_th.wr_chan_flags |= CHAN_HT40U;
else
sc->sc_rx_th.wr_chan_flags |= CHAN_HT40D;
[ath] fix short-GI wireshark flag. Yes, HAL_RX_GI means "short guard interval."
2017-05-26 00:48:21 +00:00
if (rs->rs_flags & HAL_RX_GI)
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
sc->sc_rx_th.wr_flags |= IEEE80211_RADIOTAP_F_SHORTGI;
}
For PHY error frames, populate the configured channel flags rather than based on the received frame. PHY errors don't have the relevant HT or 40MHz MCS flag set.
2013-01-04 06:28:34 +00:00
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
sc->sc_rx_th.wr_tsf = htole64(ath_extend_tsf(sc, rs->rs_tstamp, tsf));
if (rs->rs_status & HAL_RXERR_CRC)
sc->sc_rx_th.wr_flags |= IEEE80211_RADIOTAP_F_BADFCS;
/* XXX propagate other error flags from descriptor */
sc->sc_rx_th.wr_antnoise = nf;
sc->sc_rx_th.wr_antsignal = nf + rs->rs_rssi;
sc->sc_rx_th.wr_antenna = rs->rs_antenna;
#undef CHAN_HT
#undef CHAN_HT20
#undef CHAN_HT40U
#undef CHAN_HT40D
}
static void
ath_handle_micerror(struct ieee80211com *ic,
struct ieee80211_frame *wh, int keyix)
{
struct ieee80211_node *ni;
/* XXX recheck MIC to deal w/ chips that lie */
/* XXX discard MIC errors on !data frames */
ni = ieee80211_find_rxnode(ic, (const struct ieee80211_frame_min *) wh);
if (ni != NULL) {
ieee80211_notify_michael_failure(ni->ni_vap, wh, keyix);
ieee80211_free_node(ni);
}
}
Fix the busdma logic to work with EDMA chipsets when using bounce buffers (ie, >4GB on amd64.) The underlying problem was that PREREAD doesn't sync the mbuf with the DMA memory (ie, bounce buffer), so the bounce buffer may have had stale information. Thus it was always considering the buffer completed and things just went off the rails. This change does the following: * Make ath_rx_pkt() always consume the mbuf somehow; it no longer passes error mbufs (eg CRC errors, crypt errors, etc) back up to the RX path to recycle. This means that a new mbuf is always allocated each time, but it's cleaner. * Push the RX buffer map/unmap to occur in the RX path, not ath_rx_pkt(). Thus, ath_rx_pkt() now assumes (a) it has to consume the mbuf somehow, and (b) that it's already been unmapped and synced. * For the legacy path, the descriptor isn't mapped, it comes out of coherent, DMA memory anyway. So leave it there. * For the EDMA path, the RX descriptor has to be cleared before its passed to the hardware, so that when we check with a POSTREAD sync, we actually get either a blank (not finished) or a filled out descriptor (finished.) Otherwise we get stale data in the DMA memory. * .. so, for EDMA RX path, we need PREREAD|PREWRITE to sync the data -> DMA memory, then POSTREAD|POSTWRITE to finish syncing the DMA memory -> data. * Whilst we're here, make sure that in EDMA buffer setup (ie, bzero'ing the descriptor part) is done before the mbuf is map/synched. NOTE: there's been a lot of commits besides this one with regards to tidying up the busdma handling in ath(4). Please check the recent commit history. Discussed with and thanks to: scottl Tested: * AR5416 (non-EDMA) on i386, with the DMA tag for the driver set to 2^^30, not 2^^32, STA * AR9580 (EDMA) on i386, as above, STA * User - tested AR9380 on amd64 with 32GB RAM. PR: kern/177530
2013-04-04 08:21:56 +00:00
/*
* Process a single packet.
*
* The mbuf must already be synced, unmapped and removed from bf->bf_m
* by this stage.
*
* The mbuf must be consumed by this routine - either passed up the
* net80211 stack, put on the holding queue, or freed.
*/
Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code. Prepare ath_rx_pkt() to handle multiple RX queues, and default the legacy RX queue to use the HP queue.
2012-07-10 00:02:19 +00:00
int
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
ath_rx_pkt(struct ath_softc *sc, struct ath_rx_status *rs, HAL_STATUS status,
Fix the busdma logic to work with EDMA chipsets when using bounce buffers (ie, >4GB on amd64.) The underlying problem was that PREREAD doesn't sync the mbuf with the DMA memory (ie, bounce buffer), so the bounce buffer may have had stale information. Thus it was always considering the buffer completed and things just went off the rails. This change does the following: * Make ath_rx_pkt() always consume the mbuf somehow; it no longer passes error mbufs (eg CRC errors, crypt errors, etc) back up to the RX path to recycle. This means that a new mbuf is always allocated each time, but it's cleaner. * Push the RX buffer map/unmap to occur in the RX path, not ath_rx_pkt(). Thus, ath_rx_pkt() now assumes (a) it has to consume the mbuf somehow, and (b) that it's already been unmapped and synced. * For the legacy path, the descriptor isn't mapped, it comes out of coherent, DMA memory anyway. So leave it there. * For the EDMA path, the RX descriptor has to be cleared before its passed to the hardware, so that when we check with a POSTREAD sync, we actually get either a blank (not finished) or a filled out descriptor (finished.) Otherwise we get stale data in the DMA memory. * .. so, for EDMA RX path, we need PREREAD|PREWRITE to sync the data -> DMA memory, then POSTREAD|POSTWRITE to finish syncing the DMA memory -> data. * Whilst we're here, make sure that in EDMA buffer setup (ie, bzero'ing the descriptor part) is done before the mbuf is map/synched. NOTE: there's been a lot of commits besides this one with regards to tidying up the busdma handling in ath(4). Please check the recent commit history. Discussed with and thanks to: scottl Tested: * AR5416 (non-EDMA) on i386, with the DMA tag for the driver set to 2^^30, not 2^^32, STA * AR9580 (EDMA) on i386, as above, STA * User - tested AR9380 on amd64 with 32GB RAM. PR: kern/177530
2013-04-04 08:21:56 +00:00
uint64_t tsf, int nf, HAL_RX_QUEUE qtype, struct ath_buf *bf,
struct mbuf *m)
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
{
uint64_t rstamp;
[ath] add the MIMO per-chain RSSI and noise floor information. This is a long time coming. The general pieces have been floating around in a local repo since circa 2012 when I dropped the net80211 support into the tree. This allows the per-chain RSSI and NF to show up in 'ifconfig wlanX list sta'. I haven't yet implemented the EVM hookups so that'll show up; that'll come later. Thanks to Susie Hellings <susie@susie.id.au> who did the original work on this a looong time ago for a company we both worked at.
2016-11-03 23:05:39 +00:00
/* XXX TODO: make this an mbuf tag? */
struct ieee80211_rx_stats rxs;
int len, type, i;
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
struct ieee80211com *ic = &sc->sc_ic;
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
struct ieee80211_node *ni;
int is_good = 0;
Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code. Prepare ath_rx_pkt() to handle multiple RX queues, and default the legacy RX queue to use the HP queue.
2012-07-10 00:02:19 +00:00
struct ath_rx_edma *re = &sc->sc_rxedma[qtype];
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
[ath] Attempt to fix epoch handling. The epoch stuff with taskqueues works fine if the driver never calls the receive path in other contexts, but this driver does. If there was a chip reset during active receive then part of the reset will call the receive path to flush out any active packets before reinitialising the receive queue and that needs to be done with the epoch held. So: * make the receive task a normal task again * explicitly call epoch enter/exit around the legacy and newer DMA receive paths * add a couple of epoch asserts to ensure that the receive packet path itself is called with epoch held. This fixes it on my Atom eeepc laptop (circa 2010!) that I did all of my initial 802.11n work in this driver and net80211. Tested: * AR9285, STA mode TODO: * Test on EDMA chipset (AR9380) * Test in AP/adhoc modes, just to be sure (eg for beacon receive processing in particular.)
2020-02-20 07:12:43 +00:00
NET_EPOCH_ASSERT();
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
/*
* Calculate the correct 64 bit TSF given
* the TSF64 register value and rs_tstamp.
*/
rstamp = ath_extend_tsf(sc, rs->rs_tstamp, tsf);
[ath] [ath_hal] retire AH_SUPPORT_AR5416 changing anything. Yes, the memory bloat is large, but it's 2017 and I'll fix it later by making it runtime configurable / per-chip configurable if I ever need to.
2017-05-25 04:26:26 +00:00
/* 802.11 return codes - These aren't specifically errors */
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
if (rs->rs_flags & HAL_RX_GI)
sc->sc_stats.ast_rx_halfgi++;
if (rs->rs_flags & HAL_RX_2040)
sc->sc_stats.ast_rx_2040++;
if (rs->rs_flags & HAL_RX_DELIM_CRC_PRE)
sc->sc_stats.ast_rx_pre_crc_err++;
if (rs->rs_flags & HAL_RX_DELIM_CRC_POST)
sc->sc_stats.ast_rx_post_crc_err++;
if (rs->rs_flags & HAL_RX_DECRYPT_BUSY)
sc->sc_stats.ast_rx_decrypt_busy_err++;
if (rs->rs_flags & HAL_RX_HI_RX_CHAIN)
sc->sc_stats.ast_rx_hi_rx_chain++;
Implement STBC receive frame statistics. The AR9280 and later can receive STBC. This adds some statistics tracking to count these frames. A patch to athstats will be forthcoming.
2013-05-08 01:11:25 +00:00
if (rs->rs_flags & HAL_RX_STBC)
sc->sc_stats.ast_rx_stbc++;
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
if (rs->rs_status != 0) {
if (rs->rs_status & HAL_RXERR_CRC)
sc->sc_stats.ast_rx_crcerr++;
if (rs->rs_status & HAL_RXERR_FIFO)
sc->sc_stats.ast_rx_fifoerr++;
if (rs->rs_status & HAL_RXERR_PHY) {
sc->sc_stats.ast_rx_phyerr++;
/* Process DFS radar events */
if ((rs->rs_phyerr == HAL_PHYERR_RADAR) ||
(rs->rs_phyerr == HAL_PHYERR_FALSE_RADAR_EXT)) {
/* Now pass it to the radar processing code */
Change the ath_dfs_process_phy_err() method to take an mbuf rather than a buffer pointer. For large radar pulses, the AR9130 and later will return a series of FFT results for software processing. These can overflow a single 2KB buffer on longer pulses. This would result in undefined buffer behaviour.
2012-06-24 08:09:06 +00:00
ath_dfs_process_phy_err(sc, m, rstamp, rs);
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
}
[ath] Don't use hard-coded values in the sanity check. Don't use hard-coded values in the phy error and receive antenna checks.
2020-12-08 17:27:24 +00:00
/*
* Be suitably paranoid about receiving phy errors
* out of the stats array bounds
*/
if (rs->rs_phyerr < ATH_IOCTL_STATS_NUM_RX_PHYERR)
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
sc->sc_stats.ast_rx_phy[rs->rs_phyerr]++;
goto rx_error; /* NB: don't count in ierrors */
}
if (rs->rs_status & HAL_RXERR_DECRYPT) {
/*
* Decrypt error. If the error occurred
* because there was no hardware key, then
* let the frame through so the upper layers
* can process it. This is necessary for 5210
* parts which have no way to setup a ``clear''
* key cache entry.
*
* XXX do key cache faulting
*/
if (rs->rs_keyix == HAL_RXKEYIX_INVALID)
goto rx_accept;
sc->sc_stats.ast_rx_badcrypt++;
}
Handle RX Keymiss events. The AR9003 series NICs implement a separate RX error to signal that a Keycache miss occured. The earlier NICs would not set the key index valid bit. I'll dig into the difference between "no key index bit set" and "keycache miss".
2012-07-15 20:51:41 +00:00
/*
* Similar as above - if the failure was a keymiss
* just punt it up to the upper layers for now.
*/
if (rs->rs_status & HAL_RXERR_KEYMISS) {
sc->sc_stats.ast_rx_keymiss++;
goto rx_accept;
}
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
if (rs->rs_status & HAL_RXERR_MIC) {
sc->sc_stats.ast_rx_badmic++;
/*
* Do minimal work required to hand off
* the 802.11 header for notification.
*/
/* XXX frag's and qos frames */
len = rs->rs_datalen;
if (len >= sizeof (struct ieee80211_frame)) {
ath_handle_micerror(ic,
mtod(m, struct ieee80211_frame *),
sc->sc_splitmic ?
rs->rs_keyix-32 : rs->rs_keyix);
}
}
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
counter_u64_add(ic->ic_ierrors, 1);
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
rx_error:
/*
* Cleanup any pending partial frame.
*/
Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code. Prepare ath_rx_pkt() to handle multiple RX queues, and default the legacy RX queue to use the HP queue.
2012-07-10 00:02:19 +00:00
if (re->m_rxpending != NULL) {
m_freem(re->m_rxpending);
re->m_rxpending = NULL;
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
}
/*
* When a tap is present pass error frames
* that have been requested. By default we
* pass decrypt+mic errors but others may be
* interesting (e.g. crc).
*/
if (ieee80211_radiotap_active(ic) &&
(rs->rs_status & sc->sc_monpass)) {
/* NB: bpf needs the mbuf length setup */
len = rs->rs_datalen;
m->m_pkthdr.len = m->m_len = len;
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
ath_rx_tap(sc, m, rs, rstamp, nf);
Introduce an optional ath(4) radiotap vendor extension. This includes a few new fields in each RXed frame: * per chain RX RSSI (ctl and ext); * current RX chainmask; * EVM information; * PHY error code; * basic RX status bits (CRC error, PHY error, etc). This is primarily to allow me to do some userland PHY error processing for radar and spectral scan data. However since EVM and per-chain RSSI is provided, others may find it useful for a variety of tasks. The default is to not compile in the radiotap vendor extensions, primarily because tcpdump doesn't seem to handle the particular vendor extension layout I'm using, and I'd rather not break existing code out there that may be (badly) parsing the radiotap data. Instead, add the option 'ATH_ENABLE_RADIOTAP_VENDOR_EXT' to your kernel configuration file to enable these options.
2012-06-24 07:01:49 +00:00
#ifdef ATH_ENABLE_RADIOTAP_VENDOR_EXT
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
ath_rx_tap_vendor(sc, m, rs, rstamp, nf);
Introduce an optional ath(4) radiotap vendor extension. This includes a few new fields in each RXed frame: * per chain RX RSSI (ctl and ext); * current RX chainmask; * EVM information; * PHY error code; * basic RX status bits (CRC error, PHY error, etc). This is primarily to allow me to do some userland PHY error processing for radar and spectral scan data. However since EVM and per-chain RSSI is provided, others may find it useful for a variety of tasks. The default is to not compile in the radiotap vendor extensions, primarily because tcpdump doesn't seem to handle the particular vendor extension layout I'm using, and I'd rather not break existing code out there that may be (badly) parsing the radiotap data. Instead, add the option 'ATH_ENABLE_RADIOTAP_VENDOR_EXT' to your kernel configuration file to enable these options.
2012-06-24 07:01:49 +00:00
#endif /* ATH_ENABLE_RADIOTAP_VENDOR_EXT */
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
ieee80211_radiotap_rx_all(ic, m);
}
/* XXX pass MIC errors up for s/w reclaculation */
Fix the busdma logic to work with EDMA chipsets when using bounce buffers (ie, >4GB on amd64.) The underlying problem was that PREREAD doesn't sync the mbuf with the DMA memory (ie, bounce buffer), so the bounce buffer may have had stale information. Thus it was always considering the buffer completed and things just went off the rails. This change does the following: * Make ath_rx_pkt() always consume the mbuf somehow; it no longer passes error mbufs (eg CRC errors, crypt errors, etc) back up to the RX path to recycle. This means that a new mbuf is always allocated each time, but it's cleaner. * Push the RX buffer map/unmap to occur in the RX path, not ath_rx_pkt(). Thus, ath_rx_pkt() now assumes (a) it has to consume the mbuf somehow, and (b) that it's already been unmapped and synced. * For the legacy path, the descriptor isn't mapped, it comes out of coherent, DMA memory anyway. So leave it there. * For the EDMA path, the RX descriptor has to be cleared before its passed to the hardware, so that when we check with a POSTREAD sync, we actually get either a blank (not finished) or a filled out descriptor (finished.) Otherwise we get stale data in the DMA memory. * .. so, for EDMA RX path, we need PREREAD|PREWRITE to sync the data -> DMA memory, then POSTREAD|POSTWRITE to finish syncing the DMA memory -> data. * Whilst we're here, make sure that in EDMA buffer setup (ie, bzero'ing the descriptor part) is done before the mbuf is map/synched. NOTE: there's been a lot of commits besides this one with regards to tidying up the busdma handling in ath(4). Please check the recent commit history. Discussed with and thanks to: scottl Tested: * AR5416 (non-EDMA) on i386, with the DMA tag for the driver set to 2^^30, not 2^^32, STA * AR9580 (EDMA) on i386, as above, STA * User - tested AR9380 on amd64 with 32GB RAM. PR: kern/177530
2013-04-04 08:21:56 +00:00
m_freem(m); m = NULL;
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
goto rx_next;
}
rx_accept:
len = rs->rs_datalen;
m->m_len = len;
if (rs->rs_more) {
/*
* Frame spans multiple descriptors; save
* it for the next completed descriptor, it
* will be used to construct a jumbogram.
*/
Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code. Prepare ath_rx_pkt() to handle multiple RX queues, and default the legacy RX queue to use the HP queue.
2012-07-10 00:02:19 +00:00
if (re->m_rxpending != NULL) {
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
/* NB: max frame size is currently 2 clusters */
sc->sc_stats.ast_rx_toobig++;
Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code. Prepare ath_rx_pkt() to handle multiple RX queues, and default the legacy RX queue to use the HP queue.
2012-07-10 00:02:19 +00:00
m_freem(re->m_rxpending);
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
}
m->m_pkthdr.len = len;
Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code. Prepare ath_rx_pkt() to handle multiple RX queues, and default the legacy RX queue to use the HP queue.
2012-07-10 00:02:19 +00:00
re->m_rxpending = m;
Fix the busdma logic to work with EDMA chipsets when using bounce buffers (ie, >4GB on amd64.) The underlying problem was that PREREAD doesn't sync the mbuf with the DMA memory (ie, bounce buffer), so the bounce buffer may have had stale information. Thus it was always considering the buffer completed and things just went off the rails. This change does the following: * Make ath_rx_pkt() always consume the mbuf somehow; it no longer passes error mbufs (eg CRC errors, crypt errors, etc) back up to the RX path to recycle. This means that a new mbuf is always allocated each time, but it's cleaner. * Push the RX buffer map/unmap to occur in the RX path, not ath_rx_pkt(). Thus, ath_rx_pkt() now assumes (a) it has to consume the mbuf somehow, and (b) that it's already been unmapped and synced. * For the legacy path, the descriptor isn't mapped, it comes out of coherent, DMA memory anyway. So leave it there. * For the EDMA path, the RX descriptor has to be cleared before its passed to the hardware, so that when we check with a POSTREAD sync, we actually get either a blank (not finished) or a filled out descriptor (finished.) Otherwise we get stale data in the DMA memory. * .. so, for EDMA RX path, we need PREREAD|PREWRITE to sync the data -> DMA memory, then POSTREAD|POSTWRITE to finish syncing the DMA memory -> data. * Whilst we're here, make sure that in EDMA buffer setup (ie, bzero'ing the descriptor part) is done before the mbuf is map/synched. NOTE: there's been a lot of commits besides this one with regards to tidying up the busdma handling in ath(4). Please check the recent commit history. Discussed with and thanks to: scottl Tested: * AR5416 (non-EDMA) on i386, with the DMA tag for the driver set to 2^^30, not 2^^32, STA * AR9580 (EDMA) on i386, as above, STA * User - tested AR9380 on amd64 with 32GB RAM. PR: kern/177530
2013-04-04 08:21:56 +00:00
m = NULL;
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
goto rx_next;
Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code. Prepare ath_rx_pkt() to handle multiple RX queues, and default the legacy RX queue to use the HP queue.
2012-07-10 00:02:19 +00:00
} else if (re->m_rxpending != NULL) {
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
/*
* This is the second part of a jumbogram,
* chain it to the first mbuf, adjust the
* frame length, and clear the rxpending state.
*/
Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code. Prepare ath_rx_pkt() to handle multiple RX queues, and default the legacy RX queue to use the HP queue.
2012-07-10 00:02:19 +00:00
re->m_rxpending->m_next = m;
re->m_rxpending->m_pkthdr.len += len;
m = re->m_rxpending;
re->m_rxpending = NULL;
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
} else {
/*
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
* Normal single-descriptor receive; setup packet length.
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
*/
m->m_pkthdr.len = len;
}
/*
* Validate rs->rs_antenna.
*
* Some users w/ AR9285 NICs have reported crashes
* here because rs_antenna field is bogusly large.
* Let's enforce the maximum antenna limit of 8
* (and it shouldn't be hard coded, but that's a
* separate problem) and if there's an issue, print
* out an error and adjust rs_antenna to something
* sensible.
*
* This code should be removed once the actual
* root cause of the issue has been identified.
* For example, it may be that the rs_antenna
dev/ath: minor spelling fixes in comments. No functional change. Reviewed by: adrian
2016-05-02 19:56:48 +00:00
* field is only valid for the last frame of
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
* an aggregate and it just happens that it is
* "mostly" right. (This is a general statement -
* the majority of the statistics are only valid
* for the last frame in an aggregate.
*/
[ath] Don't use hard-coded values in the sanity check. Don't use hard-coded values in the phy error and receive antenna checks.
2020-12-08 17:27:24 +00:00
if (rs->rs_antenna >= ATH_IOCTL_STATS_NUM_RX_ANTENNA) {
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
device_printf(sc->sc_dev, "%s: rs_antenna > 7 (%d)\n",
__func__, rs->rs_antenna);
#ifdef ATH_DEBUG
ath_printrxbuf(sc, bf, 0, status == HAL_OK);
#endif /* ATH_DEBUG */
rs->rs_antenna = 0; /* XXX better than nothing */
}
Implement a bit of a hack to store the AR9285/AR9485 RX LNA configuration in the RX antenna field. The AR9285/AR9485 use an LNA mixer to determine how to combine the signals from the two antennas. This is encoded in the RSSI fields (ctl/ext) for chain 2. So, let's use that here. This maps RX antennas 0->3 to the RX mixer configuration used to receive a frame. There's more that can be done but this is good enough to diagnose if the hardware is doing "odd" things like trying to receive frames on LNA2 (ie, antenna 2 or "alt" antenna) when there's only one antenna connected. Tested: * AR9285, STA mode
2013-06-05 00:45:19 +00:00
/*
* If this is an AR9285/AR9485, then the receive and LNA
* configuration is stored in RSSI[2] / EXTRSSI[2].
* We can extract this out to build a much better
* receive antenna profile.
*
* Yes, this just blurts over the above RX antenna field
* for now. It's fine, the AR9285 doesn't really use
* that.
*
* Later on we should store away the fine grained LNA
* information and keep separate counters just for
* that. It'll help when debugging the AR9285/AR9485
* combined diversity code.
*/
if (sc->sc_rx_lnamixer) {
rs->rs_antenna = 0;
/* Bits 0:1 - the LNA configuration used */
rs->rs_antenna |=
((rs->rs_rssi_ctl[2] & HAL_RX_LNA_CFG_USED)
>> HAL_RX_LNA_CFG_USED_S);
/* Bit 2 - the external RX antenna switch */
if (rs->rs_rssi_ctl[2] & HAL_RX_LNA_EXTCFG)
rs->rs_antenna |= 0x4;
}
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
sc->sc_stats.ast_ant_rx[rs->rs_antenna]++;
/*
* Populate the rx status block. When there are bpf
* listeners we do the additional work to provide
* complete status. Otherwise we fill in only the
* material required by ieee80211_input. Note that
* noise setting is filled in above.
*/
Introduce an optional ath(4) radiotap vendor extension. This includes a few new fields in each RXed frame: * per chain RX RSSI (ctl and ext); * current RX chainmask; * EVM information; * PHY error code; * basic RX status bits (CRC error, PHY error, etc). This is primarily to allow me to do some userland PHY error processing for radar and spectral scan data. However since EVM and per-chain RSSI is provided, others may find it useful for a variety of tasks. The default is to not compile in the radiotap vendor extensions, primarily because tcpdump doesn't seem to handle the particular vendor extension layout I'm using, and I'd rather not break existing code out there that may be (badly) parsing the radiotap data. Instead, add the option 'ATH_ENABLE_RADIOTAP_VENDOR_EXT' to your kernel configuration file to enable these options.
2012-06-24 07:01:49 +00:00
if (ieee80211_radiotap_active(ic)) {
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
ath_rx_tap(sc, m, rs, rstamp, nf);
Introduce an optional ath(4) radiotap vendor extension. This includes a few new fields in each RXed frame: * per chain RX RSSI (ctl and ext); * current RX chainmask; * EVM information; * PHY error code; * basic RX status bits (CRC error, PHY error, etc). This is primarily to allow me to do some userland PHY error processing for radar and spectral scan data. However since EVM and per-chain RSSI is provided, others may find it useful for a variety of tasks. The default is to not compile in the radiotap vendor extensions, primarily because tcpdump doesn't seem to handle the particular vendor extension layout I'm using, and I'd rather not break existing code out there that may be (badly) parsing the radiotap data. Instead, add the option 'ATH_ENABLE_RADIOTAP_VENDOR_EXT' to your kernel configuration file to enable these options.
2012-06-24 07:01:49 +00:00
#ifdef ATH_ENABLE_RADIOTAP_VENDOR_EXT
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
ath_rx_tap_vendor(sc, m, rs, rstamp, nf);
Introduce an optional ath(4) radiotap vendor extension. This includes a few new fields in each RXed frame: * per chain RX RSSI (ctl and ext); * current RX chainmask; * EVM information; * PHY error code; * basic RX status bits (CRC error, PHY error, etc). This is primarily to allow me to do some userland PHY error processing for radar and spectral scan data. However since EVM and per-chain RSSI is provided, others may find it useful for a variety of tasks. The default is to not compile in the radiotap vendor extensions, primarily because tcpdump doesn't seem to handle the particular vendor extension layout I'm using, and I'd rather not break existing code out there that may be (badly) parsing the radiotap data. Instead, add the option 'ATH_ENABLE_RADIOTAP_VENDOR_EXT' to your kernel configuration file to enable these options.
2012-06-24 07:01:49 +00:00
#endif /* ATH_ENABLE_RADIOTAP_VENDOR_EXT */
}
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
/*
* From this point on we assume the frame is at least
* as large as ieee80211_frame_min; verify that.
*/
if (len < IEEE80211_MIN_LEN) {
if (!ieee80211_radiotap_active(ic)) {
DPRINTF(sc, ATH_DEBUG_RECV,
"%s: short packet %d\n", __func__, len);
sc->sc_stats.ast_rx_tooshort++;
} else {
/* NB: in particular this captures ack's */
ieee80211_radiotap_rx_all(ic, m);
}
Fix the busdma logic to work with EDMA chipsets when using bounce buffers (ie, >4GB on amd64.) The underlying problem was that PREREAD doesn't sync the mbuf with the DMA memory (ie, bounce buffer), so the bounce buffer may have had stale information. Thus it was always considering the buffer completed and things just went off the rails. This change does the following: * Make ath_rx_pkt() always consume the mbuf somehow; it no longer passes error mbufs (eg CRC errors, crypt errors, etc) back up to the RX path to recycle. This means that a new mbuf is always allocated each time, but it's cleaner. * Push the RX buffer map/unmap to occur in the RX path, not ath_rx_pkt(). Thus, ath_rx_pkt() now assumes (a) it has to consume the mbuf somehow, and (b) that it's already been unmapped and synced. * For the legacy path, the descriptor isn't mapped, it comes out of coherent, DMA memory anyway. So leave it there. * For the EDMA path, the RX descriptor has to be cleared before its passed to the hardware, so that when we check with a POSTREAD sync, we actually get either a blank (not finished) or a filled out descriptor (finished.) Otherwise we get stale data in the DMA memory. * .. so, for EDMA RX path, we need PREREAD|PREWRITE to sync the data -> DMA memory, then POSTREAD|POSTWRITE to finish syncing the DMA memory -> data. * Whilst we're here, make sure that in EDMA buffer setup (ie, bzero'ing the descriptor part) is done before the mbuf is map/synched. NOTE: there's been a lot of commits besides this one with regards to tidying up the busdma handling in ath(4). Please check the recent commit history. Discussed with and thanks to: scottl Tested: * AR5416 (non-EDMA) on i386, with the DMA tag for the driver set to 2^^30, not 2^^32, STA * AR9580 (EDMA) on i386, as above, STA * User - tested AR9380 on amd64 with 32GB RAM. PR: kern/177530
2013-04-04 08:21:56 +00:00
m_freem(m); m = NULL;
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
goto rx_next;
}
if (IFF_DUMPPKTS(sc, ATH_DEBUG_RECV)) {
const HAL_RATE_TABLE *rt = sc->sc_currates;
uint8_t rix = rt->rateCodeToIndex[rs->rs_rate];
ieee80211_dump_pkt(ic, mtod(m, caddr_t), len,
sc->sc_hwmap[rix].ieeerate, rs->rs_rssi);
}
m_adj(m, -IEEE80211_CRC_LEN);
/*
* Locate the node for sender, track state, and then
* pass the (referenced) node up to the 802.11 layer
* for its use.
*/
ni = ieee80211_find_rxnode_withkey(ic,
mtod(m, const struct ieee80211_frame_min *),
rs->rs_keyix == HAL_RXKEYIX_INVALID ?
IEEE80211_KEYIX_NONE : rs->rs_keyix);
sc->sc_lastrs = rs;
if (rs->rs_isaggr)
sc->sc_stats.ast_rx_agg++;
[ath] add the MIMO per-chain RSSI and noise floor information. This is a long time coming. The general pieces have been floating around in a local repo since circa 2012 when I dropped the net80211 support into the tree. This allows the per-chain RSSI and NF to show up in 'ifconfig wlanX list sta'. I haven't yet implemented the EVM hookups so that'll show up; that'll come later. Thanks to Susie Hellings <susie@susie.id.au> who did the original work on this a looong time ago for a company we both worked at.
2016-11-03 23:05:39 +00:00
/*
* Populate the per-chain RSSI values where appropriate.
*/
bzero(&rxs, sizeof(rxs));
rxs.r_flags |= IEEE80211_R_NF | IEEE80211_R_RSSI |
IEEE80211_R_C_CHAIN |
IEEE80211_R_C_NF |
IEEE80211_R_C_RSSI |
IEEE80211_R_TSF64 |
IEEE80211_R_TSF_START; /* XXX TODO: validate */
rxs.c_rssi = rs->rs_rssi;
rxs.c_nf = nf;
rxs.c_chain = 3; /* XXX TODO: check */
rxs.c_rx_tsf = rstamp;
for (i = 0; i < 3; i++) {
rxs.c_rssi_ctl[i] = rs->rs_rssi_ctl[i];
rxs.c_rssi_ext[i] = rs->rs_rssi_ext[i];
/*
* XXX note: we currently don't track
* per-chain noisefloor.
*/
rxs.c_nf_ctl[i] = nf;
rxs.c_nf_ext[i] = nf;
}
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
if (ni != NULL) {
/*
* Only punt packets for ampdu reorder processing for
* 11n nodes; net80211 enforces that M_AMPDU is only
* set for 11n nodes.
*/
if (ni->ni_flags & IEEE80211_NODE_HT)
m->m_flags |= M_AMPDU;
[ath] [ath_rate] Fix ANI calibration during non-ACTIVE states; start poking at rate control These are some fun issues I've found with my upstairs wifi link at such a ridiculous low signal level (like, < 5dB.) * Add per-station tx/rx rssi statistics, in potential preparation to use that in the RX rate control. * Call the rate control on each received frame to let it potentially use it as a hint for what rates to potentially use. It's a no-op right now. * Do ANI calibration during scan as well. The ath_newstate() call was disabling the ANI timer and only re-enabling it during transitions to _RUN. This has the unfortunate side-effect that if ANI deafened the NIC because of interference and it disassociated, it wouldn't be reset and the scan would never hear beacons. The ANI configuration is stored at least globally on some HALs and per-channel on others. Because of this a NIC reset wouldn't help; the ANI parameters would simply be programmed back in. Now, I have a feeling I also need to do this during AUTH/ASSOC too and maybe, if I'm feeling clever, I need to reset the ANI parameters on a given channel during a transition through INIT or if the VAP is destroyed/re-created. However for now this gets me out of the immediate weeds with connectivity upstairs (and thus I /can/ commit); I'll keep chipping away at tidying this stuff up in subsequent commits. Tested: * AR9344 (Wasp), 2G STA mode
2019-05-05 04:56:37 +00:00
/*
* Inform rate control about the received RSSI.
* It can then use this information to potentially drastically
* alter the available rate based on the RSSI estimate.
*
* This is super important when associating to a far away station;
* you don't want to waste time trying higher rates at some low
* packet exchange rate (like during DHCP) just to establish
* that higher MCS rates aren't available.
*/
ATH_RSSI_LPF(ATH_NODE(ni)->an_node_stats.ns_avgrssi,
rs->rs_rssi);
ath_rate_update_rx_rssi(sc, ATH_NODE(ni),
ATH_RSSI(ATH_NODE(ni)->an_node_stats.ns_avgrssi));
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
/*
* Sending station is known, dispatch directly.
*/
[ath] add the MIMO per-chain RSSI and noise floor information. This is a long time coming. The general pieces have been floating around in a local repo since circa 2012 when I dropped the net80211 support into the tree. This allows the per-chain RSSI and NF to show up in 'ifconfig wlanX list sta'. I haven't yet implemented the EVM hookups so that'll show up; that'll come later. Thanks to Susie Hellings <susie@susie.id.au> who did the original work on this a looong time ago for a company we both worked at.
2016-11-03 23:05:39 +00:00
(void) ieee80211_add_rx_params(m, &rxs);
type = ieee80211_input_mimo(ni, m);
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
ieee80211_free_node(ni);
Fix the busdma logic to work with EDMA chipsets when using bounce buffers (ie, >4GB on amd64.) The underlying problem was that PREREAD doesn't sync the mbuf with the DMA memory (ie, bounce buffer), so the bounce buffer may have had stale information. Thus it was always considering the buffer completed and things just went off the rails. This change does the following: * Make ath_rx_pkt() always consume the mbuf somehow; it no longer passes error mbufs (eg CRC errors, crypt errors, etc) back up to the RX path to recycle. This means that a new mbuf is always allocated each time, but it's cleaner. * Push the RX buffer map/unmap to occur in the RX path, not ath_rx_pkt(). Thus, ath_rx_pkt() now assumes (a) it has to consume the mbuf somehow, and (b) that it's already been unmapped and synced. * For the legacy path, the descriptor isn't mapped, it comes out of coherent, DMA memory anyway. So leave it there. * For the EDMA path, the RX descriptor has to be cleared before its passed to the hardware, so that when we check with a POSTREAD sync, we actually get either a blank (not finished) or a filled out descriptor (finished.) Otherwise we get stale data in the DMA memory. * .. so, for EDMA RX path, we need PREREAD|PREWRITE to sync the data -> DMA memory, then POSTREAD|POSTWRITE to finish syncing the DMA memory -> data. * Whilst we're here, make sure that in EDMA buffer setup (ie, bzero'ing the descriptor part) is done before the mbuf is map/synched. NOTE: there's been a lot of commits besides this one with regards to tidying up the busdma handling in ath(4). Please check the recent commit history. Discussed with and thanks to: scottl Tested: * AR5416 (non-EDMA) on i386, with the DMA tag for the driver set to 2^^30, not 2^^32, STA * AR9580 (EDMA) on i386, as above, STA * User - tested AR9380 on amd64 with 32GB RAM. PR: kern/177530
2013-04-04 08:21:56 +00:00
m = NULL;
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
/*
* Arrange to update the last rx timestamp only for
* frames from our ap when operating in station mode.
* This assumes the rx key is always setup when
* associated.
*/
if (ic->ic_opmode == IEEE80211_M_STA &&
rs->rs_keyix != HAL_RXKEYIX_INVALID)
is_good = 1;
} else {
[ath] add the MIMO per-chain RSSI and noise floor information. This is a long time coming. The general pieces have been floating around in a local repo since circa 2012 when I dropped the net80211 support into the tree. This allows the per-chain RSSI and NF to show up in 'ifconfig wlanX list sta'. I haven't yet implemented the EVM hookups so that'll show up; that'll come later. Thanks to Susie Hellings <susie@susie.id.au> who did the original work on this a looong time ago for a company we both worked at.
2016-11-03 23:05:39 +00:00
(void) ieee80211_add_rx_params(m, &rxs);
type = ieee80211_input_mimo_all(ic, m);
Fix the busdma logic to work with EDMA chipsets when using bounce buffers (ie, >4GB on amd64.) The underlying problem was that PREREAD doesn't sync the mbuf with the DMA memory (ie, bounce buffer), so the bounce buffer may have had stale information. Thus it was always considering the buffer completed and things just went off the rails. This change does the following: * Make ath_rx_pkt() always consume the mbuf somehow; it no longer passes error mbufs (eg CRC errors, crypt errors, etc) back up to the RX path to recycle. This means that a new mbuf is always allocated each time, but it's cleaner. * Push the RX buffer map/unmap to occur in the RX path, not ath_rx_pkt(). Thus, ath_rx_pkt() now assumes (a) it has to consume the mbuf somehow, and (b) that it's already been unmapped and synced. * For the legacy path, the descriptor isn't mapped, it comes out of coherent, DMA memory anyway. So leave it there. * For the EDMA path, the RX descriptor has to be cleared before its passed to the hardware, so that when we check with a POSTREAD sync, we actually get either a blank (not finished) or a filled out descriptor (finished.) Otherwise we get stale data in the DMA memory. * .. so, for EDMA RX path, we need PREREAD|PREWRITE to sync the data -> DMA memory, then POSTREAD|POSTWRITE to finish syncing the DMA memory -> data. * Whilst we're here, make sure that in EDMA buffer setup (ie, bzero'ing the descriptor part) is done before the mbuf is map/synched. NOTE: there's been a lot of commits besides this one with regards to tidying up the busdma handling in ath(4). Please check the recent commit history. Discussed with and thanks to: scottl Tested: * AR5416 (non-EDMA) on i386, with the DMA tag for the driver set to 2^^30, not 2^^32, STA * AR9580 (EDMA) on i386, as above, STA * User - tested AR9380 on amd64 with 32GB RAM. PR: kern/177530
2013-04-04 08:21:56 +00:00
m = NULL;
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
}
Fix the busdma logic to work with EDMA chipsets when using bounce buffers (ie, >4GB on amd64.) The underlying problem was that PREREAD doesn't sync the mbuf with the DMA memory (ie, bounce buffer), so the bounce buffer may have had stale information. Thus it was always considering the buffer completed and things just went off the rails. This change does the following: * Make ath_rx_pkt() always consume the mbuf somehow; it no longer passes error mbufs (eg CRC errors, crypt errors, etc) back up to the RX path to recycle. This means that a new mbuf is always allocated each time, but it's cleaner. * Push the RX buffer map/unmap to occur in the RX path, not ath_rx_pkt(). Thus, ath_rx_pkt() now assumes (a) it has to consume the mbuf somehow, and (b) that it's already been unmapped and synced. * For the legacy path, the descriptor isn't mapped, it comes out of coherent, DMA memory anyway. So leave it there. * For the EDMA path, the RX descriptor has to be cleared before its passed to the hardware, so that when we check with a POSTREAD sync, we actually get either a blank (not finished) or a filled out descriptor (finished.) Otherwise we get stale data in the DMA memory. * .. so, for EDMA RX path, we need PREREAD|PREWRITE to sync the data -> DMA memory, then POSTREAD|POSTWRITE to finish syncing the DMA memory -> data. * Whilst we're here, make sure that in EDMA buffer setup (ie, bzero'ing the descriptor part) is done before the mbuf is map/synched. NOTE: there's been a lot of commits besides this one with regards to tidying up the busdma handling in ath(4). Please check the recent commit history. Discussed with and thanks to: scottl Tested: * AR5416 (non-EDMA) on i386, with the DMA tag for the driver set to 2^^30, not 2^^32, STA * AR9580 (EDMA) on i386, as above, STA * User - tested AR9380 on amd64 with 32GB RAM. PR: kern/177530
2013-04-04 08:21:56 +00:00
/*
* At this point we have passed the frame up the stack; thus
* the mbuf is no longer ours.
*/
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
/*
[ath] [ath_rate] Fix ANI calibration during non-ACTIVE states; start poking at rate control These are some fun issues I've found with my upstairs wifi link at such a ridiculous low signal level (like, < 5dB.) * Add per-station tx/rx rssi statistics, in potential preparation to use that in the RX rate control. * Call the rate control on each received frame to let it potentially use it as a hint for what rates to potentially use. It's a no-op right now. * Do ANI calibration during scan as well. The ath_newstate() call was disabling the ANI timer and only re-enabling it during transitions to _RUN. This has the unfortunate side-effect that if ANI deafened the NIC because of interference and it disassociated, it wouldn't be reset and the scan would never hear beacons. The ANI configuration is stored at least globally on some HALs and per-channel on others. Because of this a NIC reset wouldn't help; the ANI parameters would simply be programmed back in. Now, I have a feeling I also need to do this during AUTH/ASSOC too and maybe, if I'm feeling clever, I need to reset the ANI parameters on a given channel during a transition through INIT or if the VAP is destroyed/re-created. However for now this gets me out of the immediate weeds with connectivity upstairs (and thus I /can/ commit); I'll keep chipping away at tidying this stuff up in subsequent commits. Tested: * AR9344 (Wasp), 2G STA mode
2019-05-05 04:56:37 +00:00
* Track legacy station RX rssi and do any rx antenna management.
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
*/
ATH_RSSI_LPF(sc->sc_halstats.ns_avgrssi, rs->rs_rssi);
if (sc->sc_diversity) {
/*
* When using fast diversity, change the default rx
* antenna if diversity chooses the other antenna 3
* times in a row.
*/
if (sc->sc_defant != rs->rs_antenna) {
if (++sc->sc_rxotherant >= 3)
ath_setdefantenna(sc, rs->rs_antenna);
} else
sc->sc_rxotherant = 0;
}
Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver. The AR9485 chip and AR933x SoC both implement LNA diversity. There are a few extra things that need to happen before this can be flipped on for those chips (mostly to do with setting up the different bias values and LNA1/LNA2 RSSI differences) but the first stage is putting this code into the driver layer so it can be reused. This has the added benefit of making it easier to expose configuration options and diagnostic information via the ioctl API. That's not yet being done but it sure would be nice to do so. Tested: * AR9285, with LNA diversity enabled * AR9285, with LNA diversity disabled in EEPROM
2013-06-12 14:52:57 +00:00
/* Handle slow diversity if enabled */
if (sc->sc_dolnadiv) {
ath_lna_rx_comb_scan(sc, rs, ticks, hz);
}
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
if (sc->sc_softled) {
/*
* Blink for any data frame. Otherwise do a
* heartbeat-style blink when idle. The latter
* is mainly for station mode where we depend on
* periodic beacon frames to trigger the poll event.
*/
if (type == IEEE80211_FC0_TYPE_DATA) {
const HAL_RATE_TABLE *rt = sc->sc_currates;
ath_led_event(sc,
rt->rateCodeToIndex[rs->rs_rate]);
} else if (ticks - sc->sc_ledevent >= sc->sc_ledidle)
ath_led_event(sc, 0);
}
rx_next:
Fix the busdma logic to work with EDMA chipsets when using bounce buffers (ie, >4GB on amd64.) The underlying problem was that PREREAD doesn't sync the mbuf with the DMA memory (ie, bounce buffer), so the bounce buffer may have had stale information. Thus it was always considering the buffer completed and things just went off the rails. This change does the following: * Make ath_rx_pkt() always consume the mbuf somehow; it no longer passes error mbufs (eg CRC errors, crypt errors, etc) back up to the RX path to recycle. This means that a new mbuf is always allocated each time, but it's cleaner. * Push the RX buffer map/unmap to occur in the RX path, not ath_rx_pkt(). Thus, ath_rx_pkt() now assumes (a) it has to consume the mbuf somehow, and (b) that it's already been unmapped and synced. * For the legacy path, the descriptor isn't mapped, it comes out of coherent, DMA memory anyway. So leave it there. * For the EDMA path, the RX descriptor has to be cleared before its passed to the hardware, so that when we check with a POSTREAD sync, we actually get either a blank (not finished) or a filled out descriptor (finished.) Otherwise we get stale data in the DMA memory. * .. so, for EDMA RX path, we need PREREAD|PREWRITE to sync the data -> DMA memory, then POSTREAD|POSTWRITE to finish syncing the DMA memory -> data. * Whilst we're here, make sure that in EDMA buffer setup (ie, bzero'ing the descriptor part) is done before the mbuf is map/synched. NOTE: there's been a lot of commits besides this one with regards to tidying up the busdma handling in ath(4). Please check the recent commit history. Discussed with and thanks to: scottl Tested: * AR5416 (non-EDMA) on i386, with the DMA tag for the driver set to 2^^30, not 2^^32, STA * AR9580 (EDMA) on i386, as above, STA * User - tested AR9380 on amd64 with 32GB RAM. PR: kern/177530
2013-04-04 08:21:56 +00:00
/*
* Debugging - complain if we didn't NULL the mbuf pointer
* here.
*/
if (m != NULL) {
device_printf(sc->sc_dev,
"%s: mbuf %p should've been freed!\n",
__func__,
m);
}
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
return (is_good);
}
Break the RX processing up into smaller chunks of 128 frames each. Right now processing a full 512 frame queue takes quite a while (measured on the order of milliseconds.) Because of this, the TX processing ends up sometimes preempting the taskqueue: * userland sends a frame * it goes in through net80211 and out to ath_start() * ath_start() will end up either direct dispatching or software queuing a frame. If TX had to wait for RX to finish, it would add quite a few ms of additional latency to the packet transmission. This in the past has caused issues with TCP throughput. Now, as part of my attempt to bring sanity to the TX/RX paths, the first step is to make the RX processing happen in smaller 'parts'. That way when TX is pushed into the ath taskqueue, there won't be so much latency in the way of things. The bigger scale change (which will come much later) is to actually process the frames in the ath_intr taskqueue but process _frames_ in the ath driver taskqueue. That would reduce the latency between processing and requeuing new descriptors. But that'll come later. The actual work: * Add ATH_RX_MAX at 128 (static for now); * break out of the processing loop if npkts reaches ATH_RX_MAX; * if we processed ATH_RX_MAX or more frames during the processing loop, immediately reschedule another RX taskqueue run. This will handle the further frames in the taskqueue. This should have very minimal impact on the general throughput case, unless the scheduler is being very very strange or the ath taskqueue ends up spending a lot of time on non-RX operations (such as TX completion.)
2012-10-14 20:31:38 +00:00
#define ATH_RX_MAX 128
Modify the RX path to keep the previous RX descriptor around once it's used. It turns out that the RX DMA engine does the same last-descriptor-link- pointer-re-reading trick that the TX DMA engine. That is, the hardware re-reads the link pointer before it moves onto the next descriptor. Thus we can't free a descriptor before we move on; it's possible the hardware will need to re-read the link pointer before we overwrite it with a new one. Tested: * AR5416, STA mode TODO: * more thorough AP and STA mode testing! * test on other pre-AR9380 NICs, just to be sure. * Break out the RX descriptor grabbing bits from the RX completion bits, like what is done in the RX EDMA code, so .. * .. the RX lock can be held during ath_rx_proc(), but not across packet input.
2014-05-06 01:15:42 +00:00
/*
* XXX TODO: break out the "get buffers" from "call ath_rx_pkt()" like
* the EDMA code does.
*
* XXX TODO: then, do all of the RX list management stuff inside
* ATH_RX_LOCK() so we don't end up potentially racing. The EDMA
* code is doing it right.
*/
Begin abstracting out the RX path in preparation for RX EDMA support. The RX EDMA support requires a modified approach to the RX descriptor handling. Specifically: * There's now two RX queues - high and low priority; * The RX queues are implemented as FIFOs; they're now an array of pointers to buffers; * .. and the RX buffer and descriptor are in the same "buffer", rather than being separate. So to that end, this commit abstracts out most of the RX related functions from the bulk of the driver. Notably, the RX DMA/buffer allocation isn't updated, primarily because I haven't yet fleshed out what it should look like. Whilst I'm here, create a set of matching but mostly unimplemented EDMA stubs. Tested: * AR9280, station mode TODO: * Thorough AP and other mode testing for non-EDMA chips; * Figure out how to allocate RX buffers suitable for RX EDMA, including correctly setting the mbuf length to compensate for the RX descriptor and completion status area.
2012-07-03 06:59:12 +00:00
static void
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
ath_rx_proc(struct ath_softc *sc, int resched)
{
#define PA2DESC(_sc, _pa) \
((struct ath_desc *)((caddr_t)(_sc)->sc_rxdma.dd_desc + \
((_pa) - (_sc)->sc_rxdma.dd_desc_paddr)))
struct ath_buf *bf;
struct ath_hal *ah = sc->sc_ah;
Re-add 'ic' and properly wrap it in the SUPERG macro.
2012-05-21 17:51:26 +00:00
#ifdef IEEE80211_SUPPORT_SUPERG
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
struct ieee80211com *ic = &sc->sc_ic;
Re-add 'ic' and properly wrap it in the SUPERG macro.
2012-05-21 17:51:26 +00:00
#endif
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
struct ath_desc *ds;
struct ath_rx_status *rs;
struct mbuf *m;
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
int ngood;
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
HAL_STATUS status;
int16_t nf;
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
u_int64_t tsf;
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
int npkts = 0;
If we're doing a kickpcu, make sure we flush the whole RX list rather than stopping after 128 frames. Whilst here, add in some code that lets me optionally flip back to the original behaviour of calling ath_startrecv().
2013-01-13 22:41:58 +00:00
int kickpcu = 0;
Modify the RX path to keep the previous RX descriptor around once it's used. It turns out that the RX DMA engine does the same last-descriptor-link- pointer-re-reading trick that the TX DMA engine. That is, the hardware re-reads the link pointer before it moves onto the next descriptor. Thus we can't free a descriptor before we move on; it's possible the hardware will need to re-read the link pointer before we overwrite it with a new one. Tested: * AR5416, STA mode TODO: * more thorough AP and STA mode testing! * test on other pre-AR9380 NICs, just to be sure. * Break out the RX descriptor grabbing bits from the RX completion bits, like what is done in the RX EDMA code, so .. * .. the RX lock can be held during ath_rx_proc(), but not across packet input.
2014-05-06 01:15:42 +00:00
int ret;
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
[ath] Attempt to fix epoch handling. The epoch stuff with taskqueues works fine if the driver never calls the receive path in other contexts, but this driver does. If there was a chip reset during active receive then part of the reset will call the receive path to flush out any active packets before reinitialising the receive queue and that needs to be done with the epoch held. So: * make the receive task a normal task again * explicitly call epoch enter/exit around the legacy and newer DMA receive paths * add a couple of epoch asserts to ensure that the receive packet path itself is called with epoch held. This fixes it on my Atom eeepc laptop (circa 2010!) that I did all of my initial 802.11n work in this driver and net80211. Tested: * AR9285, STA mode TODO: * Test on EDMA chipset (AR9380) * Test in AP/adhoc modes, just to be sure (eg for beacon receive processing in particular.)
2020-02-20 07:12:43 +00:00
NET_EPOCH_ASSERT();
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
/* XXX we must not hold the ATH_LOCK here */
ATH_UNLOCK_ASSERT(sc);
ATH_PCU_UNLOCK_ASSERT(sc);
ATH_PCU_LOCK(sc);
sc->sc_rxproc_cnt++;
If we're doing a kickpcu, make sure we flush the whole RX list rather than stopping after 128 frames. Whilst here, add in some code that lets me optionally flip back to the original behaviour of calling ath_startrecv().
2013-01-13 22:41:58 +00:00
kickpcu = sc->sc_kickpcu;
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
ATH_PCU_UNLOCK(sc);
Bring over some initial power save management support, reset path fixes and beacon programming / debugging into the ath(4) driver. The basic power save tracking: * Add some new code to track the current desired powersave state; and * Add some reference count tracking so we know when the NIC is awake; then * Add code in all the points where we're about to touch the hardware and push it to force-wake. Then, how things are moved into power save: * Only move into network-sleep during a RUN->SLEEP transition; * Force wake the hardware up everywhere that we're about to touch the hardware. The net80211 stack takes care of doing RUN<->SLEEP<->(other) state transitions so we don't have to do it in the driver. Next, when to wake things up: * In short - everywhere we touch the hardware. * The hardware will take care of staying awake if things are queued in the transmit queue(s); it'll then transit down to sleep if there's nothing left. This way we don't have to track the software / hardware transmit queue(s) and keep the hardware awake for those. Then, some transmit path fixes that aren't related but useful: * Force EAPOL frames to go out at the lowest rate. This improves reliability during the encryption handshake after 802.11 negotiation. Next, some reset path fixes! * Fix the overlap between reset and transmit pause so we don't transmit frames during a reset. * Some noisy environments will end up taking a lot longer to reset than normal, so extend the reset period and drop the raise the reset interval to be more realistic and give the hardware some time to finish calibration. * Skip calibration during the reset path. Tsk! Then, beacon fixes in station mode! * Add a _lot_ more debugging in the station beacon reset path. This is all quite fluid right now. * Modify the STA beacon programming code to try and take the TU gap between desired TSF and the target TU into account. (Lifted from QCA.) Tested: * AR5210 * AR5211 * AR5212 * AR5413 * AR5416 * AR9280 * AR9285 TODO: * More AP, IBSS, mesh, TDMA testing * Thorough AR9380 and later testing! * AR9160 and AR9287 testing Obtained from: QCA
2014-04-30 02:19:41 +00:00
ATH_LOCK(sc);
ath_power_set_power_state(sc, HAL_PM_AWAKE);
ATH_UNLOCK(sc);
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
DPRINTF(sc, ATH_DEBUG_RX_PROC, "%s: called\n", __func__);
ngood = 0;
nf = ath_hal_getchannoise(ah, sc->sc_curchan);
sc->sc_stats.ast_rx_noise = nf;
tsf = ath_hal_gettsf64(ah);
do {
Break the RX processing up into smaller chunks of 128 frames each. Right now processing a full 512 frame queue takes quite a while (measured on the order of milliseconds.) Because of this, the TX processing ends up sometimes preempting the taskqueue: * userland sends a frame * it goes in through net80211 and out to ath_start() * ath_start() will end up either direct dispatching or software queuing a frame. If TX had to wait for RX to finish, it would add quite a few ms of additional latency to the packet transmission. This in the past has caused issues with TCP throughput. Now, as part of my attempt to bring sanity to the TX/RX paths, the first step is to make the RX processing happen in smaller 'parts'. That way when TX is pushed into the ath taskqueue, there won't be so much latency in the way of things. The bigger scale change (which will come much later) is to actually process the frames in the ath_intr taskqueue but process _frames_ in the ath driver taskqueue. That would reduce the latency between processing and requeuing new descriptors. But that'll come later. The actual work: * Add ATH_RX_MAX at 128 (static for now); * break out of the processing loop if npkts reaches ATH_RX_MAX; * if we processed ATH_RX_MAX or more frames during the processing loop, immediately reschedule another RX taskqueue run. This will handle the further frames in the taskqueue. This should have very minimal impact on the general throughput case, unless the scheduler is being very very strange or the ath taskqueue ends up spending a lot of time on non-RX operations (such as TX completion.)
2012-10-14 20:31:38 +00:00
/*
* Don't process too many packets at a time; give the
* TX thread time to also run - otherwise the TX
* latency can jump by quite a bit, causing throughput
* degredation.
*/
If we're doing a kickpcu, make sure we flush the whole RX list rather than stopping after 128 frames. Whilst here, add in some code that lets me optionally flip back to the original behaviour of calling ath_startrecv().
2013-01-13 22:41:58 +00:00
if (!kickpcu && npkts >= ATH_RX_MAX)
Break the RX processing up into smaller chunks of 128 frames each. Right now processing a full 512 frame queue takes quite a while (measured on the order of milliseconds.) Because of this, the TX processing ends up sometimes preempting the taskqueue: * userland sends a frame * it goes in through net80211 and out to ath_start() * ath_start() will end up either direct dispatching or software queuing a frame. If TX had to wait for RX to finish, it would add quite a few ms of additional latency to the packet transmission. This in the past has caused issues with TCP throughput. Now, as part of my attempt to bring sanity to the TX/RX paths, the first step is to make the RX processing happen in smaller 'parts'. That way when TX is pushed into the ath taskqueue, there won't be so much latency in the way of things. The bigger scale change (which will come much later) is to actually process the frames in the ath_intr taskqueue but process _frames_ in the ath driver taskqueue. That would reduce the latency between processing and requeuing new descriptors. But that'll come later. The actual work: * Add ATH_RX_MAX at 128 (static for now); * break out of the processing loop if npkts reaches ATH_RX_MAX; * if we processed ATH_RX_MAX or more frames during the processing loop, immediately reschedule another RX taskqueue run. This will handle the further frames in the taskqueue. This should have very minimal impact on the general throughput case, unless the scheduler is being very very strange or the ath taskqueue ends up spending a lot of time on non-RX operations (such as TX completion.)
2012-10-14 20:31:38 +00:00
break;
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
bf = TAILQ_FIRST(&sc->sc_rxbuf);
if (sc->sc_rxslink && bf == NULL) { /* NB: shouldn't happen */
Use device_printf() instead of if_printf(). No functional changes.
2015-05-29 14:35:16 +00:00
device_printf(sc->sc_dev, "%s: no buffer!\n", __func__);
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
break;
} else if (bf == NULL) {
/*
* End of List:
* this can happen for non-self-linked RX chains
*/
sc->sc_stats.ast_rx_hitqueueend++;
break;
}
m = bf->bf_m;
if (m == NULL) { /* NB: shouldn't happen */
/*
* If mbuf allocation failed previously there
* will be no mbuf; try again to re-populate it.
*/
/* XXX make debug msg */
Use device_printf() instead of if_printf(). No functional changes.
2015-05-29 14:35:16 +00:00
device_printf(sc->sc_dev, "%s: no mbuf!\n", __func__);
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
TAILQ_REMOVE(&sc->sc_rxbuf, bf, bf_list);
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
goto rx_proc_next;
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
}
ds = bf->bf_desc;
if (ds->ds_link == bf->bf_daddr) {
/* NB: never process the self-linked entry at the end */
sc->sc_stats.ast_rx_hitqueueend++;
break;
}
/* XXX sync descriptor memory */
/*
* Must provide the virtual address of the current
* descriptor, the physical address, and the virtual
* address of the next descriptor in the h/w chain.
* This allows the HAL to look ahead to see if the
* hardware is done with a descriptor by checking the
* done bit in the following descriptor and the address
* of the current descriptor the DMA engine is working
* on. All this is necessary because of our use of
* a self-linked list to avoid rx overruns.
*/
rs = &bf->bf_status.ds_rxstat;
status = ath_hal_rxprocdesc(ah, ds,
bf->bf_daddr, PA2DESC(sc, ds->ds_link), rs);
#ifdef ATH_DEBUG
if (sc->sc_debug & ATH_DEBUG_RECV_DESC)
ath_printrxbuf(sc, bf, 0, status == HAL_OK);
#endif
ALQ logging enhancements: * upon setup, tell the alq code what the chip information is. * add TX/RX path logging for legacy chips. * populate the tx/rx descriptor length fields with a best-estimate. It's overly big (96 bytes when AH_SUPPORT_AR5416 is enabled) but it'll do for now. Whilst I'm here, add CURVNET_RESTORE() here during probe/attach as a partial solution to fixing crashes during attach when the attach fails. There are other attach failures that I have to deal with; those'll come later.
2012-11-16 19:57:16 +00:00
#ifdef ATH_DEBUG_ALQ
if (if_ath_alq_checkdebug(&sc->sc_alq, ATH_ALQ_EDMA_RXSTATUS))
if_ath_alq_post(&sc->sc_alq, ATH_ALQ_EDMA_RXSTATUS,
sc->sc_rx_statuslen, (char *) ds);
#endif /* ATH_DEBUG_ALQ */
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
if (status == HAL_EINPROGRESS)
break;
TAILQ_REMOVE(&sc->sc_rxbuf, bf, bf_list);
npkts++;
/*
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
* Process a single frame.
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
*/
Fix the busdma logic to work with EDMA chipsets when using bounce buffers (ie, >4GB on amd64.) The underlying problem was that PREREAD doesn't sync the mbuf with the DMA memory (ie, bounce buffer), so the bounce buffer may have had stale information. Thus it was always considering the buffer completed and things just went off the rails. This change does the following: * Make ath_rx_pkt() always consume the mbuf somehow; it no longer passes error mbufs (eg CRC errors, crypt errors, etc) back up to the RX path to recycle. This means that a new mbuf is always allocated each time, but it's cleaner. * Push the RX buffer map/unmap to occur in the RX path, not ath_rx_pkt(). Thus, ath_rx_pkt() now assumes (a) it has to consume the mbuf somehow, and (b) that it's already been unmapped and synced. * For the legacy path, the descriptor isn't mapped, it comes out of coherent, DMA memory anyway. So leave it there. * For the EDMA path, the RX descriptor has to be cleared before its passed to the hardware, so that when we check with a POSTREAD sync, we actually get either a blank (not finished) or a filled out descriptor (finished.) Otherwise we get stale data in the DMA memory. * .. so, for EDMA RX path, we need PREREAD|PREWRITE to sync the data -> DMA memory, then POSTREAD|POSTWRITE to finish syncing the DMA memory -> data. * Whilst we're here, make sure that in EDMA buffer setup (ie, bzero'ing the descriptor part) is done before the mbuf is map/synched. NOTE: there's been a lot of commits besides this one with regards to tidying up the busdma handling in ath(4). Please check the recent commit history. Discussed with and thanks to: scottl Tested: * AR5416 (non-EDMA) on i386, with the DMA tag for the driver set to 2^^30, not 2^^32, STA * AR9580 (EDMA) on i386, as above, STA * User - tested AR9380 on amd64 with 32GB RAM. PR: kern/177530
2013-04-04 08:21:56 +00:00
bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap);
bf->bf_m = NULL;
if (ath_rx_pkt(sc, rs, status, tsf, nf, HAL_RX_QUEUE_HP, bf, m))
Migrate the per-frame code out from ath_rx_proc() to ath_rx_pkt(). This will (eventually) be used by the EDMA RX path used by the AR93xx and later NICs.
2012-05-20 06:35:22 +00:00
ngood++;
rx_proc_next:
Modify the RX path to keep the previous RX descriptor around once it's used. It turns out that the RX DMA engine does the same last-descriptor-link- pointer-re-reading trick that the TX DMA engine. That is, the hardware re-reads the link pointer before it moves onto the next descriptor. Thus we can't free a descriptor before we move on; it's possible the hardware will need to re-read the link pointer before we overwrite it with a new one. Tested: * AR5416, STA mode TODO: * more thorough AP and STA mode testing! * test on other pre-AR9380 NICs, just to be sure. * Break out the RX descriptor grabbing bits from the RX completion bits, like what is done in the RX EDMA code, so .. * .. the RX lock can be held during ath_rx_proc(), but not across packet input.
2014-05-06 01:15:42 +00:00
/*
* If there's a holding buffer, insert that onto
* the RX list; the hardware is now definitely not pointing
* to it now.
*/
ret = 0;
if (sc->sc_rxedma[HAL_RX_QUEUE_HP].m_holdbf != NULL) {
TAILQ_INSERT_TAIL(&sc->sc_rxbuf,
sc->sc_rxedma[HAL_RX_QUEUE_HP].m_holdbf,
bf_list);
ret = ath_rxbuf_init(sc,
sc->sc_rxedma[HAL_RX_QUEUE_HP].m_holdbf);
}
/*
* Next, throw our buffer into the holding entry. The hardware
* may use the descriptor to read the link pointer before
* DMAing the next descriptor in to write out a packet.
*/
sc->sc_rxedma[HAL_RX_QUEUE_HP].m_holdbf = bf;
} while (ret == 0);
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
/* rx signal state monitoring */
ath_hal_rxmonitor(ah, &sc->sc_halstats, sc->sc_curchan);
if (ngood)
sc->sc_lastrx = tsf;
Migrate the ath(4) KTR logging to use an ATH_KTR() macro. This should eventually be unified with ATH_DEBUG() so I can get both from one macro; that may take some time. Add some new probes for TX and TX completion.
2012-09-24 20:35:56 +00:00
ATH_KTR(sc, ATH_KTR_RXPROC, 2, "ath_rx_proc: npkts=%d, ngood=%d", npkts, ngood);
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
/* Queue DFS tasklet if needed */
if (resched && ath_dfs_tasklet_needed(sc, sc->sc_curchan))
taskqueue_enqueue(sc->sc_tq, &sc->sc_dfstask);
/*
* Now that all the RX frames were handled that
* need to be handled, kick the PCU if there's
* been an RXEOL condition.
*/
* Reduce the PCU lock overhead a little by only re-acquiring it if we actually do have to reinitialise the RX side of things after an RX descriptor EOL error. * Revert a change of mine from quite a while ago - don't shortcut the RX initialisation path. There's a RX FIFO bug in the earlier chips (I'm not sure when it was fixed in this series, but it's fixed with the AR9380 and later) which causes the same RX descriptor to be written to over and over. This causes the descriptor to be marked as "done", and this ends up causing the whole RX path to go very strange. This should fixed the "kickpcu; handled X packets" message spam where "X" is consistently small.
2013-02-16 19:11:57 +00:00
if (resched && kickpcu) {
ATH_PCU_LOCK(sc);
Migrate the ath(4) KTR logging to use an ATH_KTR() macro. This should eventually be unified with ATH_DEBUG() so I can get both from one macro; that may take some time. Add some new probes for TX and TX completion.
2012-09-24 20:35:56 +00:00
ATH_KTR(sc, ATH_KTR_ERROR, 0, "ath_rx_proc: kickpcu");
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
device_printf(sc->sc_dev, "%s: kickpcu; handled %d packets\n",
__func__, npkts);
* Reduce the PCU lock overhead a little by only re-acquiring it if we actually do have to reinitialise the RX side of things after an RX descriptor EOL error. * Revert a change of mine from quite a while ago - don't shortcut the RX initialisation path. There's a RX FIFO bug in the earlier chips (I'm not sure when it was fixed in this series, but it's fixed with the AR9380 and later) which causes the same RX descriptor to be written to over and over. This causes the descriptor to be marked as "done", and this ends up causing the whole RX path to go very strange. This should fixed the "kickpcu; handled X packets" message spam where "X" is consistently small.
2013-02-16 19:11:57 +00:00
/*
* Go through the process of fully tearing down
* the RX buffers and reinitialising them.
*
* There's a hardware bug that causes the RX FIFO
* to get confused under certain conditions and
* constantly write over the same frame, leading
* the RX driver code here to get heavily confused.
*/
Modify the RX path to keep the previous RX descriptor around once it's used. It turns out that the RX DMA engine does the same last-descriptor-link- pointer-re-reading trick that the TX DMA engine. That is, the hardware re-reads the link pointer before it moves onto the next descriptor. Thus we can't free a descriptor before we move on; it's possible the hardware will need to re-read the link pointer before we overwrite it with a new one. Tested: * AR5416, STA mode TODO: * more thorough AP and STA mode testing! * test on other pre-AR9380 NICs, just to be sure. * Break out the RX descriptor grabbing bits from the RX completion bits, like what is done in the RX EDMA code, so .. * .. the RX lock can be held during ath_rx_proc(), but not across packet input.
2014-05-06 01:15:42 +00:00
/*
* XXX Has RX DMA stopped enough here to just call
* ath_startrecv()?
* XXX Do we need to use the holding buffer to restart
* RX DMA by appending entries to the final
* descriptor? Quite likely.
*/
* Reduce the PCU lock overhead a little by only re-acquiring it if we actually do have to reinitialise the RX side of things after an RX descriptor EOL error. * Revert a change of mine from quite a while ago - don't shortcut the RX initialisation path. There's a RX FIFO bug in the earlier chips (I'm not sure when it was fixed in this series, but it's fixed with the AR9380 and later) which causes the same RX descriptor to be written to over and over. This causes the descriptor to be marked as "done", and this ends up causing the whole RX path to go very strange. This should fixed the "kickpcu; handled X packets" message spam where "X" is consistently small.
2013-02-16 19:11:57 +00:00
#if 1
If we're doing a kickpcu, make sure we flush the whole RX list rather than stopping after 128 frames. Whilst here, add in some code that lets me optionally flip back to the original behaviour of calling ath_startrecv().
2013-01-13 22:41:58 +00:00
ath_startrecv(sc);
#else
* Reduce the PCU lock overhead a little by only re-acquiring it if we actually do have to reinitialise the RX side of things after an RX descriptor EOL error. * Revert a change of mine from quite a while ago - don't shortcut the RX initialisation path. There's a RX FIFO bug in the earlier chips (I'm not sure when it was fixed in this series, but it's fixed with the AR9380 and later) which causes the same RX descriptor to be written to over and over. This causes the descriptor to be marked as "done", and this ends up causing the whole RX path to go very strange. This should fixed the "kickpcu; handled X packets" message spam where "X" is consistently small.
2013-02-16 19:11:57 +00:00
/*
* Disabled for now - it'd be nice to be able to do
* this in order to limit the amount of CPU time spent
* reinitialising the RX side (and thus minimise RX
* drops) however there's a hardware issue that
* causes things to get too far out of whack.
*/
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
/*
* XXX can we hold the PCU lock here?
* Are there any net80211 buffer calls involved?
*/
bf = TAILQ_FIRST(&sc->sc_rxbuf);
Extend the RX HAL API to include the RX queue identifier. The AR93xx and later chips support two RX FIFO queues - a high and low priority queue. For legacy chips, just assume the queues are high priority. This is inspired by the reference driver but is a reimplementation of the API and code.
2012-07-09 07:19:11 +00:00
ath_hal_putrxbuf(ah, bf->bf_daddr, HAL_RX_QUEUE_HP);
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
ath_hal_rxena(ah); /* enable recv descriptors */
ath_mode_init(sc); /* set filters, etc. */
[ath] [ath_hal] [ath_hal_9300] Extend the start PCU receive to handle resetting ANI. One of the fun issues with scanning has been how the existing ANI values were programmed into the hardware when channels were changed. If you're on a really crappy channel and ANI has made you deaf then when you scan you continue to be deaf on all channels. This code passes in a flag to startpcureceive which in AR5416 and later is also used to enable ANI. This allows it to know if it's a normal operation or a scan operation. This fixes my situation at home where a temporary spot of a device going deaf due to interference starts scanning and .. can't hear anything until I restart. Now, this isn't the full fix - ideally: (a) all the ANI config and per-channel information would be migrated to the shared HAL stuff and enabled for all of the NICs; (b) when a station reassociates and some other error conditions (like missed beacons, NF calibration failures, etc) a knob to reset ANI parameters would likely help recovery. But hey, I'm committing bits of code again! woo! Tested: * AR9344 (2G), STA operation
2019-04-21 02:36:01 +00:00
ath_hal_startpcurecv(ah, (!! sc->sc_scanning)); /* re-enable PCU/DMA engine */
If we're doing a kickpcu, make sure we flush the whole RX list rather than stopping after 128 frames. Whilst here, add in some code that lets me optionally flip back to the original behaviour of calling ath_startrecv().
2013-01-13 22:41:58 +00:00
#endif
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
ath_hal_intrset(ah, sc->sc_imask);
sc->sc_kickpcu = 0;
* Reduce the PCU lock overhead a little by only re-acquiring it if we actually do have to reinitialise the RX side of things after an RX descriptor EOL error. * Revert a change of mine from quite a while ago - don't shortcut the RX initialisation path. There's a RX FIFO bug in the earlier chips (I'm not sure when it was fixed in this series, but it's fixed with the AR9380 and later) which causes the same RX descriptor to be written to over and over. This causes the descriptor to be marked as "done", and this ends up causing the whole RX path to go very strange. This should fixed the "kickpcu; handled X packets" message spam where "X" is consistently small.
2013-02-16 19:11:57 +00:00
ATH_PCU_UNLOCK(sc);
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
}
#ifdef IEEE80211_SUPPORT_SUPERG
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
if (resched)
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
ieee80211_ff_age_all(ic, 100);
#endif
Bring over some initial power save management support, reset path fixes and beacon programming / debugging into the ath(4) driver. The basic power save tracking: * Add some new code to track the current desired powersave state; and * Add some reference count tracking so we know when the NIC is awake; then * Add code in all the points where we're about to touch the hardware and push it to force-wake. Then, how things are moved into power save: * Only move into network-sleep during a RUN->SLEEP transition; * Force wake the hardware up everywhere that we're about to touch the hardware. The net80211 stack takes care of doing RUN<->SLEEP<->(other) state transitions so we don't have to do it in the driver. Next, when to wake things up: * In short - everywhere we touch the hardware. * The hardware will take care of staying awake if things are queued in the transmit queue(s); it'll then transit down to sleep if there's nothing left. This way we don't have to track the software / hardware transmit queue(s) and keep the hardware awake for those. Then, some transmit path fixes that aren't related but useful: * Force EAPOL frames to go out at the lowest rate. This improves reliability during the encryption handshake after 802.11 negotiation. Next, some reset path fixes! * Fix the overlap between reset and transmit pause so we don't transmit frames during a reset. * Some noisy environments will end up taking a lot longer to reset than normal, so extend the reset period and drop the raise the reset interval to be more realistic and give the hardware some time to finish calibration. * Skip calibration during the reset path. Tsk! Then, beacon fixes in station mode! * Add a _lot_ more debugging in the station beacon reset path. This is all quite fluid right now. * Modify the STA beacon programming code to try and take the TU gap between desired TSF and the target TU into account. (Lifted from QCA.) Tested: * AR5210 * AR5211 * AR5212 * AR5413 * AR5416 * AR9280 * AR9285 TODO: * More AP, IBSS, mesh, TDMA testing * Thorough AR9380 and later testing! * AR9160 and AR9287 testing Obtained from: QCA
2014-04-30 02:19:41 +00:00
/*
* Put the hardware to sleep again if we're done with it.
*/
ATH_LOCK(sc);
ath_power_restore_power_state(sc);
ATH_UNLOCK(sc);
Break the RX processing up into smaller chunks of 128 frames each. Right now processing a full 512 frame queue takes quite a while (measured on the order of milliseconds.) Because of this, the TX processing ends up sometimes preempting the taskqueue: * userland sends a frame * it goes in through net80211 and out to ath_start() * ath_start() will end up either direct dispatching or software queuing a frame. If TX had to wait for RX to finish, it would add quite a few ms of additional latency to the packet transmission. This in the past has caused issues with TCP throughput. Now, as part of my attempt to bring sanity to the TX/RX paths, the first step is to make the RX processing happen in smaller 'parts'. That way when TX is pushed into the ath taskqueue, there won't be so much latency in the way of things. The bigger scale change (which will come much later) is to actually process the frames in the ath_intr taskqueue but process _frames_ in the ath driver taskqueue. That would reduce the latency between processing and requeuing new descriptors. But that'll come later. The actual work: * Add ATH_RX_MAX at 128 (static for now); * break out of the processing loop if npkts reaches ATH_RX_MAX; * if we processed ATH_RX_MAX or more frames during the processing loop, immediately reschedule another RX taskqueue run. This will handle the further frames in the taskqueue. This should have very minimal impact on the general throughput case, unless the scheduler is being very very strange or the ath taskqueue ends up spending a lot of time on non-RX operations (such as TX completion.)
2012-10-14 20:31:38 +00:00
/*
* If we hit the maximum number of frames in this round,
* reschedule for another immediate pass. This gives
* the TX and TX completion routines time to run, which
* will reduce latency.
*/
if (npkts >= ATH_RX_MAX)
Break out the RX completion path into "FIFO check / refill" and "complete RX frames." The 128 entry RX FIFO is really easy to fill up and miss refilling when it's done in the ath taskq - as that gets blocked up doing RX completion, TX completion and other random things. So the 128 entry RX FIFO now gets emptied and refilled in the ath_intr() task (and it grabs / releases locks, so now ath_intr() can't just be a FAST handler yet!) but the locks aren't held for very long. The completion part is done in the ath taskqueue context. Details: * Create a new completed frame list - sc->sc_rx_rxlist; * Split the EDMA RX process queue into two halves - one that processes the RX FIFO and refills it with new frames; another that completes the completed frame list; * When tearing down the driver, flush whatever is in the deferred queue as well as what's in the FIFO; * Create two new RX methods - one that processes all RX queues, one that processes the given RX queue. When MSI is implemented, we get told which RX queue the interrupt came in on so we can specifically schedule that. (And I can do that with the non-MSI path too; I'll figure that out later.) * Convert the legacy code over to use these new RX methods; * Replace all the instances of the RX taskqueue enqueue with a call to a relevant RX method to enqueue one or all RX queues. Tested: * AR9380, STA * AR9580, STA * AR5413, STA
2013-03-19 19:32:28 +00:00
sc->sc_rx.recv_sched(sc, resched);
Break the RX processing up into smaller chunks of 128 frames each. Right now processing a full 512 frame queue takes quite a while (measured on the order of milliseconds.) Because of this, the TX processing ends up sometimes preempting the taskqueue: * userland sends a frame * it goes in through net80211 and out to ath_start() * ath_start() will end up either direct dispatching or software queuing a frame. If TX had to wait for RX to finish, it would add quite a few ms of additional latency to the packet transmission. This in the past has caused issues with TCP throughput. Now, as part of my attempt to bring sanity to the TX/RX paths, the first step is to make the RX processing happen in smaller 'parts'. That way when TX is pushed into the ath taskqueue, there won't be so much latency in the way of things. The bigger scale change (which will come much later) is to actually process the frames in the ath_intr taskqueue but process _frames_ in the ath driver taskqueue. That would reduce the latency between processing and requeuing new descriptors. But that'll come later. The actual work: * Add ATH_RX_MAX at 128 (static for now); * break out of the processing loop if npkts reaches ATH_RX_MAX; * if we processed ATH_RX_MAX or more frames during the processing loop, immediately reschedule another RX taskqueue run. This will handle the further frames in the taskqueue. This should have very minimal impact on the general throughput case, unless the scheduler is being very very strange or the ath taskqueue ends up spending a lot of time on non-RX operations (such as TX completion.)
2012-10-14 20:31:38 +00:00
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
ATH_PCU_LOCK(sc);
sc->sc_rxproc_cnt--;
ATH_PCU_UNLOCK(sc);
}
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
#undef PA2DESC
Break the RX processing up into smaller chunks of 128 frames each. Right now processing a full 512 frame queue takes quite a while (measured on the order of milliseconds.) Because of this, the TX processing ends up sometimes preempting the taskqueue: * userland sends a frame * it goes in through net80211 and out to ath_start() * ath_start() will end up either direct dispatching or software queuing a frame. If TX had to wait for RX to finish, it would add quite a few ms of additional latency to the packet transmission. This in the past has caused issues with TCP throughput. Now, as part of my attempt to bring sanity to the TX/RX paths, the first step is to make the RX processing happen in smaller 'parts'. That way when TX is pushed into the ath taskqueue, there won't be so much latency in the way of things. The bigger scale change (which will come much later) is to actually process the frames in the ath_intr taskqueue but process _frames_ in the ath driver taskqueue. That would reduce the latency between processing and requeuing new descriptors. But that'll come later. The actual work: * Add ATH_RX_MAX at 128 (static for now); * break out of the processing loop if npkts reaches ATH_RX_MAX; * if we processed ATH_RX_MAX or more frames during the processing loop, immediately reschedule another RX taskqueue run. This will handle the further frames in the taskqueue. This should have very minimal impact on the general throughput case, unless the scheduler is being very very strange or the ath taskqueue ends up spending a lot of time on non-RX operations (such as TX completion.)
2012-10-14 20:31:38 +00:00
#undef ATH_RX_MAX
Begin abstracting out the RX path in preparation for RX EDMA support. The RX EDMA support requires a modified approach to the RX descriptor handling. Specifically: * There's now two RX queues - high and low priority; * The RX queues are implemented as FIFOs; they're now an array of pointers to buffers; * .. and the RX buffer and descriptor are in the same "buffer", rather than being separate. So to that end, this commit abstracts out most of the RX related functions from the bulk of the driver. Notably, the RX DMA/buffer allocation isn't updated, primarily because I haven't yet fleshed out what it should look like. Whilst I'm here, create a set of matching but mostly unimplemented EDMA stubs. Tested: * AR9280, station mode TODO: * Thorough AP and other mode testing for non-EDMA chips; * Figure out how to allocate RX buffers suitable for RX EDMA, including correctly setting the mbuf length to compensate for the RX descriptor and completion status area.
2012-07-03 06:59:12 +00:00
/*
* Only run the RX proc if it's not already running.
* Since this may get run as part of the reset/flush path,
* the task can't clash with an existing, running tasklet.
*/
static void
ath_legacy_rx_tasklet(void *arg, int npending)
{
struct ath_softc *sc = arg;
[ath] Attempt to fix epoch handling. The epoch stuff with taskqueues works fine if the driver never calls the receive path in other contexts, but this driver does. If there was a chip reset during active receive then part of the reset will call the receive path to flush out any active packets before reinitialising the receive queue and that needs to be done with the epoch held. So: * make the receive task a normal task again * explicitly call epoch enter/exit around the legacy and newer DMA receive paths * add a couple of epoch asserts to ensure that the receive packet path itself is called with epoch held. This fixes it on my Atom eeepc laptop (circa 2010!) that I did all of my initial 802.11n work in this driver and net80211. Tested: * AR9285, STA mode TODO: * Test on EDMA chipset (AR9380) * Test in AP/adhoc modes, just to be sure (eg for beacon receive processing in particular.)
2020-02-20 07:12:43 +00:00
struct epoch_tracker et;
Begin abstracting out the RX path in preparation for RX EDMA support. The RX EDMA support requires a modified approach to the RX descriptor handling. Specifically: * There's now two RX queues - high and low priority; * The RX queues are implemented as FIFOs; they're now an array of pointers to buffers; * .. and the RX buffer and descriptor are in the same "buffer", rather than being separate. So to that end, this commit abstracts out most of the RX related functions from the bulk of the driver. Notably, the RX DMA/buffer allocation isn't updated, primarily because I haven't yet fleshed out what it should look like. Whilst I'm here, create a set of matching but mostly unimplemented EDMA stubs. Tested: * AR9280, station mode TODO: * Thorough AP and other mode testing for non-EDMA chips; * Figure out how to allocate RX buffers suitable for RX EDMA, including correctly setting the mbuf length to compensate for the RX descriptor and completion status area.
2012-07-03 06:59:12 +00:00
Migrate the ath(4) KTR logging to use an ATH_KTR() macro. This should eventually be unified with ATH_DEBUG() so I can get both from one macro; that may take some time. Add some new probes for TX and TX completion.
2012-09-24 20:35:56 +00:00
ATH_KTR(sc, ATH_KTR_RXPROC, 1, "ath_rx_proc: pending=%d", npending);
Begin abstracting out the RX path in preparation for RX EDMA support. The RX EDMA support requires a modified approach to the RX descriptor handling. Specifically: * There's now two RX queues - high and low priority; * The RX queues are implemented as FIFOs; they're now an array of pointers to buffers; * .. and the RX buffer and descriptor are in the same "buffer", rather than being separate. So to that end, this commit abstracts out most of the RX related functions from the bulk of the driver. Notably, the RX DMA/buffer allocation isn't updated, primarily because I haven't yet fleshed out what it should look like. Whilst I'm here, create a set of matching but mostly unimplemented EDMA stubs. Tested: * AR9280, station mode TODO: * Thorough AP and other mode testing for non-EDMA chips; * Figure out how to allocate RX buffers suitable for RX EDMA, including correctly setting the mbuf length to compensate for the RX descriptor and completion status area.
2012-07-03 06:59:12 +00:00
DPRINTF(sc, ATH_DEBUG_RX_PROC, "%s: pending %u\n", __func__, npending);
ATH_PCU_LOCK(sc);
if (sc->sc_inreset_cnt > 0) {
device_printf(sc->sc_dev,
"%s: sc_inreset_cnt > 0; skipping\n", __func__);
ATH_PCU_UNLOCK(sc);
return;
}
ATH_PCU_UNLOCK(sc);
[ath] Attempt to fix epoch handling. The epoch stuff with taskqueues works fine if the driver never calls the receive path in other contexts, but this driver does. If there was a chip reset during active receive then part of the reset will call the receive path to flush out any active packets before reinitialising the receive queue and that needs to be done with the epoch held. So: * make the receive task a normal task again * explicitly call epoch enter/exit around the legacy and newer DMA receive paths * add a couple of epoch asserts to ensure that the receive packet path itself is called with epoch held. This fixes it on my Atom eeepc laptop (circa 2010!) that I did all of my initial 802.11n work in this driver and net80211. Tested: * AR9285, STA mode TODO: * Test on EDMA chipset (AR9380) * Test in AP/adhoc modes, just to be sure (eg for beacon receive processing in particular.)
2020-02-20 07:12:43 +00:00
NET_EPOCH_ENTER(et);
Begin abstracting out the RX path in preparation for RX EDMA support. The RX EDMA support requires a modified approach to the RX descriptor handling. Specifically: * There's now two RX queues - high and low priority; * The RX queues are implemented as FIFOs; they're now an array of pointers to buffers; * .. and the RX buffer and descriptor are in the same "buffer", rather than being separate. So to that end, this commit abstracts out most of the RX related functions from the bulk of the driver. Notably, the RX DMA/buffer allocation isn't updated, primarily because I haven't yet fleshed out what it should look like. Whilst I'm here, create a set of matching but mostly unimplemented EDMA stubs. Tested: * AR9280, station mode TODO: * Thorough AP and other mode testing for non-EDMA chips; * Figure out how to allocate RX buffers suitable for RX EDMA, including correctly setting the mbuf length to compensate for the RX descriptor and completion status area.
2012-07-03 06:59:12 +00:00
ath_rx_proc(sc, 1);
[ath] Attempt to fix epoch handling. The epoch stuff with taskqueues works fine if the driver never calls the receive path in other contexts, but this driver does. If there was a chip reset during active receive then part of the reset will call the receive path to flush out any active packets before reinitialising the receive queue and that needs to be done with the epoch held. So: * make the receive task a normal task again * explicitly call epoch enter/exit around the legacy and newer DMA receive paths * add a couple of epoch asserts to ensure that the receive packet path itself is called with epoch held. This fixes it on my Atom eeepc laptop (circa 2010!) that I did all of my initial 802.11n work in this driver and net80211. Tested: * AR9285, STA mode TODO: * Test on EDMA chipset (AR9380) * Test in AP/adhoc modes, just to be sure (eg for beacon receive processing in particular.)
2020-02-20 07:12:43 +00:00
NET_EPOCH_EXIT(et);
Begin abstracting out the RX path in preparation for RX EDMA support. The RX EDMA support requires a modified approach to the RX descriptor handling. Specifically: * There's now two RX queues - high and low priority; * The RX queues are implemented as FIFOs; they're now an array of pointers to buffers; * .. and the RX buffer and descriptor are in the same "buffer", rather than being separate. So to that end, this commit abstracts out most of the RX related functions from the bulk of the driver. Notably, the RX DMA/buffer allocation isn't updated, primarily because I haven't yet fleshed out what it should look like. Whilst I'm here, create a set of matching but mostly unimplemented EDMA stubs. Tested: * AR9280, station mode TODO: * Thorough AP and other mode testing for non-EDMA chips; * Figure out how to allocate RX buffers suitable for RX EDMA, including correctly setting the mbuf length to compensate for the RX descriptor and completion status area.
2012-07-03 06:59:12 +00:00
}
static void
ath_legacy_flushrecv(struct ath_softc *sc)
{
[ath] Attempt to fix epoch handling. The epoch stuff with taskqueues works fine if the driver never calls the receive path in other contexts, but this driver does. If there was a chip reset during active receive then part of the reset will call the receive path to flush out any active packets before reinitialising the receive queue and that needs to be done with the epoch held. So: * make the receive task a normal task again * explicitly call epoch enter/exit around the legacy and newer DMA receive paths * add a couple of epoch asserts to ensure that the receive packet path itself is called with epoch held. This fixes it on my Atom eeepc laptop (circa 2010!) that I did all of my initial 802.11n work in this driver and net80211. Tested: * AR9285, STA mode TODO: * Test on EDMA chipset (AR9380) * Test in AP/adhoc modes, just to be sure (eg for beacon receive processing in particular.)
2020-02-20 07:12:43 +00:00
struct epoch_tracker et;
NET_EPOCH_ENTER(et);
Begin abstracting out the RX path in preparation for RX EDMA support. The RX EDMA support requires a modified approach to the RX descriptor handling. Specifically: * There's now two RX queues - high and low priority; * The RX queues are implemented as FIFOs; they're now an array of pointers to buffers; * .. and the RX buffer and descriptor are in the same "buffer", rather than being separate. So to that end, this commit abstracts out most of the RX related functions from the bulk of the driver. Notably, the RX DMA/buffer allocation isn't updated, primarily because I haven't yet fleshed out what it should look like. Whilst I'm here, create a set of matching but mostly unimplemented EDMA stubs. Tested: * AR9280, station mode TODO: * Thorough AP and other mode testing for non-EDMA chips; * Figure out how to allocate RX buffers suitable for RX EDMA, including correctly setting the mbuf length to compensate for the RX descriptor and completion status area.
2012-07-03 06:59:12 +00:00
ath_rx_proc(sc, 0);
[ath] Attempt to fix epoch handling. The epoch stuff with taskqueues works fine if the driver never calls the receive path in other contexts, but this driver does. If there was a chip reset during active receive then part of the reset will call the receive path to flush out any active packets before reinitialising the receive queue and that needs to be done with the epoch held. So: * make the receive task a normal task again * explicitly call epoch enter/exit around the legacy and newer DMA receive paths * add a couple of epoch asserts to ensure that the receive packet path itself is called with epoch held. This fixes it on my Atom eeepc laptop (circa 2010!) that I did all of my initial 802.11n work in this driver and net80211. Tested: * AR9285, STA mode TODO: * Test on EDMA chipset (AR9380) * Test in AP/adhoc modes, just to be sure (eg for beacon receive processing in particular.)
2020-02-20 07:12:43 +00:00
NET_EPOCH_EXIT(et);
Begin abstracting out the RX path in preparation for RX EDMA support. The RX EDMA support requires a modified approach to the RX descriptor handling. Specifically: * There's now two RX queues - high and low priority; * The RX queues are implemented as FIFOs; they're now an array of pointers to buffers; * .. and the RX buffer and descriptor are in the same "buffer", rather than being separate. So to that end, this commit abstracts out most of the RX related functions from the bulk of the driver. Notably, the RX DMA/buffer allocation isn't updated, primarily because I haven't yet fleshed out what it should look like. Whilst I'm here, create a set of matching but mostly unimplemented EDMA stubs. Tested: * AR9280, station mode TODO: * Thorough AP and other mode testing for non-EDMA chips; * Figure out how to allocate RX buffers suitable for RX EDMA, including correctly setting the mbuf length to compensate for the RX descriptor and completion status area.
2012-07-03 06:59:12 +00:00
}
Modify the RX path to keep the previous RX descriptor around once it's used. It turns out that the RX DMA engine does the same last-descriptor-link- pointer-re-reading trick that the TX DMA engine. That is, the hardware re-reads the link pointer before it moves onto the next descriptor. Thus we can't free a descriptor before we move on; it's possible the hardware will need to re-read the link pointer before we overwrite it with a new one. Tested: * AR5416, STA mode TODO: * more thorough AP and STA mode testing! * test on other pre-AR9380 NICs, just to be sure. * Break out the RX descriptor grabbing bits from the RX completion bits, like what is done in the RX EDMA code, so .. * .. the RX lock can be held during ath_rx_proc(), but not across packet input.
2014-05-06 01:15:42 +00:00
static void
ath_legacy_flush_rxpending(struct ath_softc *sc)
{
/* XXX ATH_RX_LOCK_ASSERT(sc); */
if (sc->sc_rxedma[HAL_RX_QUEUE_LP].m_rxpending != NULL) {
m_freem(sc->sc_rxedma[HAL_RX_QUEUE_LP].m_rxpending);
sc->sc_rxedma[HAL_RX_QUEUE_LP].m_rxpending = NULL;
}
if (sc->sc_rxedma[HAL_RX_QUEUE_HP].m_rxpending != NULL) {
m_freem(sc->sc_rxedma[HAL_RX_QUEUE_HP].m_rxpending);
sc->sc_rxedma[HAL_RX_QUEUE_HP].m_rxpending = NULL;
}
}
static int
ath_legacy_flush_rxholdbf(struct ath_softc *sc)
{
struct ath_buf *bf;
/* XXX ATH_RX_LOCK_ASSERT(sc); */
/*
* If there are RX holding buffers, free them here and return
* them to the list.
*
* XXX should just verify that bf->bf_m is NULL, as it must
* be at this point!
*/
bf = sc->sc_rxedma[HAL_RX_QUEUE_HP].m_holdbf;
if (bf != NULL) {
if (bf->bf_m != NULL)
m_freem(bf->bf_m);
bf->bf_m = NULL;
TAILQ_INSERT_TAIL(&sc->sc_rxbuf, bf, bf_list);
(void) ath_rxbuf_init(sc, bf);
}
sc->sc_rxedma[HAL_RX_QUEUE_HP].m_holdbf = NULL;
bf = sc->sc_rxedma[HAL_RX_QUEUE_LP].m_holdbf;
if (bf != NULL) {
if (bf->bf_m != NULL)
m_freem(bf->bf_m);
bf->bf_m = NULL;
TAILQ_INSERT_TAIL(&sc->sc_rxbuf, bf, bf_list);
(void) ath_rxbuf_init(sc, bf);
}
sc->sc_rxedma[HAL_RX_QUEUE_LP].m_holdbf = NULL;
return (0);
}
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
/*
* Disable the receive h/w in preparation for a reset.
*/
Begin abstracting out the RX path in preparation for RX EDMA support. The RX EDMA support requires a modified approach to the RX descriptor handling. Specifically: * There's now two RX queues - high and low priority; * The RX queues are implemented as FIFOs; they're now an array of pointers to buffers; * .. and the RX buffer and descriptor are in the same "buffer", rather than being separate. So to that end, this commit abstracts out most of the RX related functions from the bulk of the driver. Notably, the RX DMA/buffer allocation isn't updated, primarily because I haven't yet fleshed out what it should look like. Whilst I'm here, create a set of matching but mostly unimplemented EDMA stubs. Tested: * AR9280, station mode TODO: * Thorough AP and other mode testing for non-EDMA chips; * Figure out how to allocate RX buffers suitable for RX EDMA, including correctly setting the mbuf length to compensate for the RX descriptor and completion status area.
2012-07-03 06:59:12 +00:00
static void
ath_legacy_stoprecv(struct ath_softc *sc, int dodelay)
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
{
#define PA2DESC(_sc, _pa) \
((struct ath_desc *)((caddr_t)(_sc)->sc_rxdma.dd_desc + \
((_pa) - (_sc)->sc_rxdma.dd_desc_paddr)))
struct ath_hal *ah = sc->sc_ah;
Modify the RX path to keep the previous RX descriptor around once it's used. It turns out that the RX DMA engine does the same last-descriptor-link- pointer-re-reading trick that the TX DMA engine. That is, the hardware re-reads the link pointer before it moves onto the next descriptor. Thus we can't free a descriptor before we move on; it's possible the hardware will need to re-read the link pointer before we overwrite it with a new one. Tested: * AR5416, STA mode TODO: * more thorough AP and STA mode testing! * test on other pre-AR9380 NICs, just to be sure. * Break out the RX descriptor grabbing bits from the RX completion bits, like what is done in the RX EDMA code, so .. * .. the RX lock can be held during ath_rx_proc(), but not across packet input.
2014-05-06 01:15:42 +00:00
ATH_RX_LOCK(sc);
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
ath_hal_stoppcurecv(ah); /* disable PCU */
ath_hal_setrxfilter(ah, 0); /* clear recv filter */
ath_hal_stopdmarecv(ah); /* disable DMA engine */
/*
* TODO: see if this particular DELAY() is required; it may be
* masking some missing FIFO flush or DMA sync.
*/
#if 0
if (dodelay)
#endif
DELAY(3000); /* 3ms is long enough for 1 frame */
#ifdef ATH_DEBUG
if (sc->sc_debug & (ATH_DEBUG_RESET | ATH_DEBUG_FATAL)) {
struct ath_buf *bf;
u_int ix;
device_printf(sc->sc_dev,
"%s: rx queue %p, link %p\n",
__func__,
Extend the RX HAL API to include the RX queue identifier. The AR93xx and later chips support two RX FIFO queues - a high and low priority queue. For legacy chips, just assume the queues are high priority. This is inspired by the reference driver but is a reimplementation of the API and code.
2012-07-09 07:19:11 +00:00
(caddr_t)(uintptr_t) ath_hal_getrxbuf(ah, HAL_RX_QUEUE_HP),
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
sc->sc_rxlink);
ix = 0;
TAILQ_FOREACH(bf, &sc->sc_rxbuf, bf_list) {
struct ath_desc *ds = bf->bf_desc;
struct ath_rx_status *rs = &bf->bf_status.ds_rxstat;
HAL_STATUS status = ath_hal_rxprocdesc(ah, ds,
bf->bf_daddr, PA2DESC(sc, ds->ds_link), rs);
if (status == HAL_OK || (sc->sc_debug & ATH_DEBUG_FATAL))
ath_printrxbuf(sc, bf, ix, status == HAL_OK);
ix++;
}
}
#endif
Modify the RX path to keep the previous RX descriptor around once it's used. It turns out that the RX DMA engine does the same last-descriptor-link- pointer-re-reading trick that the TX DMA engine. That is, the hardware re-reads the link pointer before it moves onto the next descriptor. Thus we can't free a descriptor before we move on; it's possible the hardware will need to re-read the link pointer before we overwrite it with a new one. Tested: * AR5416, STA mode TODO: * more thorough AP and STA mode testing! * test on other pre-AR9380 NICs, just to be sure. * Break out the RX descriptor grabbing bits from the RX completion bits, like what is done in the RX EDMA code, so .. * .. the RX lock can be held during ath_rx_proc(), but not across packet input.
2014-05-06 01:15:42 +00:00
(void) ath_legacy_flush_rxpending(sc);
(void) ath_legacy_flush_rxholdbf(sc);
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
sc->sc_rxlink = NULL; /* just in case */
Modify the RX path to keep the previous RX descriptor around once it's used. It turns out that the RX DMA engine does the same last-descriptor-link- pointer-re-reading trick that the TX DMA engine. That is, the hardware re-reads the link pointer before it moves onto the next descriptor. Thus we can't free a descriptor before we move on; it's possible the hardware will need to re-read the link pointer before we overwrite it with a new one. Tested: * AR5416, STA mode TODO: * more thorough AP and STA mode testing! * test on other pre-AR9380 NICs, just to be sure. * Break out the RX descriptor grabbing bits from the RX completion bits, like what is done in the RX EDMA code, so .. * .. the RX lock can be held during ath_rx_proc(), but not across packet input.
2014-05-06 01:15:42 +00:00
ATH_RX_UNLOCK(sc);
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
#undef PA2DESC
}
Modify the RX path to keep the previous RX descriptor around once it's used. It turns out that the RX DMA engine does the same last-descriptor-link- pointer-re-reading trick that the TX DMA engine. That is, the hardware re-reads the link pointer before it moves onto the next descriptor. Thus we can't free a descriptor before we move on; it's possible the hardware will need to re-read the link pointer before we overwrite it with a new one. Tested: * AR5416, STA mode TODO: * more thorough AP and STA mode testing! * test on other pre-AR9380 NICs, just to be sure. * Break out the RX descriptor grabbing bits from the RX completion bits, like what is done in the RX EDMA code, so .. * .. the RX lock can be held during ath_rx_proc(), but not across packet input.
2014-05-06 01:15:42 +00:00
/*
* XXX TODO: something was calling startrecv without calling
* stoprecv. Let's figure out what/why. It was showing up
* as a mbuf leak (rxpending) and ath_buf leak (holdbf.)
*/
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
/*
* Enable the receive h/w following a reset.
*/
Begin abstracting out the RX path in preparation for RX EDMA support. The RX EDMA support requires a modified approach to the RX descriptor handling. Specifically: * There's now two RX queues - high and low priority; * The RX queues are implemented as FIFOs; they're now an array of pointers to buffers; * .. and the RX buffer and descriptor are in the same "buffer", rather than being separate. So to that end, this commit abstracts out most of the RX related functions from the bulk of the driver. Notably, the RX DMA/buffer allocation isn't updated, primarily because I haven't yet fleshed out what it should look like. Whilst I'm here, create a set of matching but mostly unimplemented EDMA stubs. Tested: * AR9280, station mode TODO: * Thorough AP and other mode testing for non-EDMA chips; * Figure out how to allocate RX buffers suitable for RX EDMA, including correctly setting the mbuf length to compensate for the RX descriptor and completion status area.
2012-07-03 06:59:12 +00:00
static int
ath_legacy_startrecv(struct ath_softc *sc)
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
{
struct ath_hal *ah = sc->sc_ah;
struct ath_buf *bf;
Modify the RX path to keep the previous RX descriptor around once it's used. It turns out that the RX DMA engine does the same last-descriptor-link- pointer-re-reading trick that the TX DMA engine. That is, the hardware re-reads the link pointer before it moves onto the next descriptor. Thus we can't free a descriptor before we move on; it's possible the hardware will need to re-read the link pointer before we overwrite it with a new one. Tested: * AR5416, STA mode TODO: * more thorough AP and STA mode testing! * test on other pre-AR9380 NICs, just to be sure. * Break out the RX descriptor grabbing bits from the RX completion bits, like what is done in the RX EDMA code, so .. * .. the RX lock can be held during ath_rx_proc(), but not across packet input.
2014-05-06 01:15:42 +00:00
ATH_RX_LOCK(sc);
/*
* XXX should verify these are already all NULL!
*/
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
sc->sc_rxlink = NULL;
Modify the RX path to keep the previous RX descriptor around once it's used. It turns out that the RX DMA engine does the same last-descriptor-link- pointer-re-reading trick that the TX DMA engine. That is, the hardware re-reads the link pointer before it moves onto the next descriptor. Thus we can't free a descriptor before we move on; it's possible the hardware will need to re-read the link pointer before we overwrite it with a new one. Tested: * AR5416, STA mode TODO: * more thorough AP and STA mode testing! * test on other pre-AR9380 NICs, just to be sure. * Break out the RX descriptor grabbing bits from the RX completion bits, like what is done in the RX EDMA code, so .. * .. the RX lock can be held during ath_rx_proc(), but not across packet input.
2014-05-06 01:15:42 +00:00
(void) ath_legacy_flush_rxpending(sc);
(void) ath_legacy_flush_rxholdbf(sc);
/*
* Re-chain all of the buffers in the RX buffer list.
*/
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
TAILQ_FOREACH(bf, &sc->sc_rxbuf, bf_list) {
int error = ath_rxbuf_init(sc, bf);
if (error != 0) {
DPRINTF(sc, ATH_DEBUG_RECV,
"%s: ath_rxbuf_init failed %d\n",
__func__, error);
return error;
}
}
bf = TAILQ_FIRST(&sc->sc_rxbuf);
Extend the RX HAL API to include the RX queue identifier. The AR93xx and later chips support two RX FIFO queues - a high and low priority queue. For legacy chips, just assume the queues are high priority. This is inspired by the reference driver but is a reimplementation of the API and code.
2012-07-09 07:19:11 +00:00
ath_hal_putrxbuf(ah, bf->bf_daddr, HAL_RX_QUEUE_HP);
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
ath_hal_rxena(ah); /* enable recv descriptors */
ath_mode_init(sc); /* set filters, etc. */
[ath] [ath_hal] [ath_hal_9300] Extend the start PCU receive to handle resetting ANI. One of the fun issues with scanning has been how the existing ANI values were programmed into the hardware when channels were changed. If you're on a really crappy channel and ANI has made you deaf then when you scan you continue to be deaf on all channels. This code passes in a flag to startpcureceive which in AR5416 and later is also used to enable ANI. This allows it to know if it's a normal operation or a scan operation. This fixes my situation at home where a temporary spot of a device going deaf due to interference starts scanning and .. can't hear anything until I restart. Now, this isn't the full fix - ideally: (a) all the ANI config and per-channel information would be migrated to the shared HAL stuff and enabled for all of the NICs; (b) when a station reassociates and some other error conditions (like missed beacons, NF calibration failures, etc) a knob to reset ANI parameters would likely help recovery. But hey, I'm committing bits of code again! woo! Tested: * AR9344 (2G), STA operation
2019-04-21 02:36:01 +00:00
ath_hal_startpcurecv(ah, (!! sc->sc_scanning)); /* re-enable PCU/DMA engine */
Modify the RX path to keep the previous RX descriptor around once it's used. It turns out that the RX DMA engine does the same last-descriptor-link- pointer-re-reading trick that the TX DMA engine. That is, the hardware re-reads the link pointer before it moves onto the next descriptor. Thus we can't free a descriptor before we move on; it's possible the hardware will need to re-read the link pointer before we overwrite it with a new one. Tested: * AR5416, STA mode TODO: * more thorough AP and STA mode testing! * test on other pre-AR9380 NICs, just to be sure. * Break out the RX descriptor grabbing bits from the RX completion bits, like what is done in the RX EDMA code, so .. * .. the RX lock can be held during ath_rx_proc(), but not across packet input.
2014-05-06 01:15:42 +00:00
ATH_RX_UNLOCK(sc);
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch]. * migrate the rx processing out into if_ath_rx.c * migrate the TSF functions into if_ath_tsf.h, as inlines This is in prepration for supporting the EDMA RX routines, required to support the AR93xx series NICs. TODO: * ath_start() shouldn't be private, but it's called as part of the RX path. I should likely migrate ath_rx_tasklet() back into if_ath.c and then return this to be 'static'. The RX code really shouldn't need to see TX routines (and vice versa.) * ath_beacon_* should be in if_ath_beacon.[ch]. * ath_tdma_* should be in if_ath_tdma.[ch] ...
2012-05-20 02:05:10 +00:00
return 0;
}
Begin abstracting out the RX path in preparation for RX EDMA support. The RX EDMA support requires a modified approach to the RX descriptor handling. Specifically: * There's now two RX queues - high and low priority; * The RX queues are implemented as FIFOs; they're now an array of pointers to buffers; * .. and the RX buffer and descriptor are in the same "buffer", rather than being separate. So to that end, this commit abstracts out most of the RX related functions from the bulk of the driver. Notably, the RX DMA/buffer allocation isn't updated, primarily because I haven't yet fleshed out what it should look like. Whilst I'm here, create a set of matching but mostly unimplemented EDMA stubs. Tested: * AR9280, station mode TODO: * Thorough AP and other mode testing for non-EDMA chips; * Figure out how to allocate RX buffers suitable for RX EDMA, including correctly setting the mbuf length to compensate for the RX descriptor and completion status area.
2012-07-03 06:59:12 +00:00
Further preparations for the RX EDMA support. Break out the DMA descriptor setup/teardown code into a method. The EDMA RX code doesn't allocate descriptors, just ath_buf entries.
2012-07-09 08:37:59 +00:00
static int
ath_legacy_dma_rxsetup(struct ath_softc *sc)
{
int error;
error = ath_descdma_setup(sc, &sc->sc_rxdma, &sc->sc_rxbuf,
Modify ath_descdma_setup() to take a descriptor size parameter. The AR9300 and later descriptors are 128 bytes, however I'd like to make sure that isn't used for earlier chips. * Populate the TX descriptor length field in the softc with sizeof(ath_desc) * Use this field when allocating the TX descriptors * Pre-AR93xx TX/RX descriptors will use the ath_desc size; newer ones will query the HAL for these sizes.
2012-07-23 23:40:13 +00:00
"rx", sizeof(struct ath_desc), ath_rxbuf, 1);
Further preparations for the RX EDMA support. Break out the DMA descriptor setup/teardown code into a method. The EDMA RX code doesn't allocate descriptors, just ath_buf entries.
2012-07-09 08:37:59 +00:00
if (error != 0)
return (error);
return (0);
}
static int
ath_legacy_dma_rxteardown(struct ath_softc *sc)
{
if (sc->sc_rxdma.dd_desc_len != 0)
ath_descdma_cleanup(sc, &sc->sc_rxdma, &sc->sc_rxbuf);
return (0);
}
Begin abstracting out the RX path in preparation for RX EDMA support. The RX EDMA support requires a modified approach to the RX descriptor handling. Specifically: * There's now two RX queues - high and low priority; * The RX queues are implemented as FIFOs; they're now an array of pointers to buffers; * .. and the RX buffer and descriptor are in the same "buffer", rather than being separate. So to that end, this commit abstracts out most of the RX related functions from the bulk of the driver. Notably, the RX DMA/buffer allocation isn't updated, primarily because I haven't yet fleshed out what it should look like. Whilst I'm here, create a set of matching but mostly unimplemented EDMA stubs. Tested: * AR9280, station mode TODO: * Thorough AP and other mode testing for non-EDMA chips; * Figure out how to allocate RX buffers suitable for RX EDMA, including correctly setting the mbuf length to compensate for the RX descriptor and completion status area.
2012-07-03 06:59:12 +00:00
Break out the RX completion path into "FIFO check / refill" and "complete RX frames." The 128 entry RX FIFO is really easy to fill up and miss refilling when it's done in the ath taskq - as that gets blocked up doing RX completion, TX completion and other random things. So the 128 entry RX FIFO now gets emptied and refilled in the ath_intr() task (and it grabs / releases locks, so now ath_intr() can't just be a FAST handler yet!) but the locks aren't held for very long. The completion part is done in the ath taskqueue context. Details: * Create a new completed frame list - sc->sc_rx_rxlist; * Split the EDMA RX process queue into two halves - one that processes the RX FIFO and refills it with new frames; another that completes the completed frame list; * When tearing down the driver, flush whatever is in the deferred queue as well as what's in the FIFO; * Create two new RX methods - one that processes all RX queues, one that processes the given RX queue. When MSI is implemented, we get told which RX queue the interrupt came in on so we can specifically schedule that. (And I can do that with the non-MSI path too; I'll figure that out later.) * Convert the legacy code over to use these new RX methods; * Replace all the instances of the RX taskqueue enqueue with a call to a relevant RX method to enqueue one or all RX queues. Tested: * AR9380, STA * AR9580, STA * AR5413, STA
2013-03-19 19:32:28 +00:00
static void
ath_legacy_recv_sched(struct ath_softc *sc, int dosched)
{
taskqueue_enqueue(sc->sc_tq, &sc->sc_rxtask);
}
static void
ath_legacy_recv_sched_queue(struct ath_softc *sc, HAL_RX_QUEUE q,
int dosched)
{
taskqueue_enqueue(sc->sc_tq, &sc->sc_rxtask);
}
Begin abstracting out the RX path in preparation for RX EDMA support. The RX EDMA support requires a modified approach to the RX descriptor handling. Specifically: * There's now two RX queues - high and low priority; * The RX queues are implemented as FIFOs; they're now an array of pointers to buffers; * .. and the RX buffer and descriptor are in the same "buffer", rather than being separate. So to that end, this commit abstracts out most of the RX related functions from the bulk of the driver. Notably, the RX DMA/buffer allocation isn't updated, primarily because I haven't yet fleshed out what it should look like. Whilst I'm here, create a set of matching but mostly unimplemented EDMA stubs. Tested: * AR9280, station mode TODO: * Thorough AP and other mode testing for non-EDMA chips; * Figure out how to allocate RX buffers suitable for RX EDMA, including correctly setting the mbuf length to compensate for the RX descriptor and completion status area.
2012-07-03 06:59:12 +00:00
void
ath_recv_setup_legacy(struct ath_softc *sc)
{
Modify ath_descdma_setup() to take a descriptor size parameter. The AR9300 and later descriptors are 128 bytes, however I'd like to make sure that isn't used for earlier chips. * Populate the TX descriptor length field in the softc with sizeof(ath_desc) * Use this field when allocating the TX descriptors * Pre-AR93xx TX/RX descriptors will use the ath_desc size; newer ones will query the HAL for these sizes.
2012-07-23 23:40:13 +00:00
/* Sensible legacy defaults */
ALQ logging enhancements: * upon setup, tell the alq code what the chip information is. * add TX/RX path logging for legacy chips. * populate the tx/rx descriptor length fields with a best-estimate. It's overly big (96 bytes when AH_SUPPORT_AR5416 is enabled) but it'll do for now. Whilst I'm here, add CURVNET_RESTORE() here during probe/attach as a partial solution to fixing crashes during attach when the attach fails. There are other attach failures that I have to deal with; those'll come later.
2012-11-16 19:57:16 +00:00
/*
* XXX this should be changed to properly support the
* exact RX descriptor size for each HAL.
*/
sc->sc_rx_statuslen = sizeof(struct ath_desc);
Modify ath_descdma_setup() to take a descriptor size parameter. The AR9300 and later descriptors are 128 bytes, however I'd like to make sure that isn't used for earlier chips. * Populate the TX descriptor length field in the softc with sizeof(ath_desc) * Use this field when allocating the TX descriptors * Pre-AR93xx TX/RX descriptors will use the ath_desc size; newer ones will query the HAL for these sizes.
2012-07-23 23:40:13 +00:00
Begin abstracting out the RX path in preparation for RX EDMA support. The RX EDMA support requires a modified approach to the RX descriptor handling. Specifically: * There's now two RX queues - high and low priority; * The RX queues are implemented as FIFOs; they're now an array of pointers to buffers; * .. and the RX buffer and descriptor are in the same "buffer", rather than being separate. So to that end, this commit abstracts out most of the RX related functions from the bulk of the driver. Notably, the RX DMA/buffer allocation isn't updated, primarily because I haven't yet fleshed out what it should look like. Whilst I'm here, create a set of matching but mostly unimplemented EDMA stubs. Tested: * AR9280, station mode TODO: * Thorough AP and other mode testing for non-EDMA chips; * Figure out how to allocate RX buffers suitable for RX EDMA, including correctly setting the mbuf length to compensate for the RX descriptor and completion status area.
2012-07-03 06:59:12 +00:00
sc->sc_rx.recv_start = ath_legacy_startrecv;
sc->sc_rx.recv_stop = ath_legacy_stoprecv;
sc->sc_rx.recv_flush = ath_legacy_flushrecv;
sc->sc_rx.recv_tasklet = ath_legacy_rx_tasklet;
sc->sc_rx.recv_rxbuf_init = ath_legacy_rxbuf_init;
Further preparations for the RX EDMA support. Break out the DMA descriptor setup/teardown code into a method. The EDMA RX code doesn't allocate descriptors, just ath_buf entries.
2012-07-09 08:37:59 +00:00
sc->sc_rx.recv_setup = ath_legacy_dma_rxsetup;
sc->sc_rx.recv_teardown = ath_legacy_dma_rxteardown;
Break out the RX completion path into "FIFO check / refill" and "complete RX frames." The 128 entry RX FIFO is really easy to fill up and miss refilling when it's done in the ath taskq - as that gets blocked up doing RX completion, TX completion and other random things. So the 128 entry RX FIFO now gets emptied and refilled in the ath_intr() task (and it grabs / releases locks, so now ath_intr() can't just be a FAST handler yet!) but the locks aren't held for very long. The completion part is done in the ath taskqueue context. Details: * Create a new completed frame list - sc->sc_rx_rxlist; * Split the EDMA RX process queue into two halves - one that processes the RX FIFO and refills it with new frames; another that completes the completed frame list; * When tearing down the driver, flush whatever is in the deferred queue as well as what's in the FIFO; * Create two new RX methods - one that processes all RX queues, one that processes the given RX queue. When MSI is implemented, we get told which RX queue the interrupt came in on so we can specifically schedule that. (And I can do that with the non-MSI path too; I'll figure that out later.) * Convert the legacy code over to use these new RX methods; * Replace all the instances of the RX taskqueue enqueue with a call to a relevant RX method to enqueue one or all RX queues. Tested: * AR9380, STA * AR9580, STA * AR5413, STA
2013-03-19 19:32:28 +00:00
sc->sc_rx.recv_sched = ath_legacy_recv_sched;
sc->sc_rx.recv_sched_queue = ath_legacy_recv_sched_queue;
Begin abstracting out the RX path in preparation for RX EDMA support. The RX EDMA support requires a modified approach to the RX descriptor handling. Specifically: * There's now two RX queues - high and low priority; * The RX queues are implemented as FIFOs; they're now an array of pointers to buffers; * .. and the RX buffer and descriptor are in the same "buffer", rather than being separate. So to that end, this commit abstracts out most of the RX related functions from the bulk of the driver. Notably, the RX DMA/buffer allocation isn't updated, primarily because I haven't yet fleshed out what it should look like. Whilst I'm here, create a set of matching but mostly unimplemented EDMA stubs. Tested: * AR9280, station mode TODO: * Thorough AP and other mode testing for non-EDMA chips; * Figure out how to allocate RX buffers suitable for RX EDMA, including correctly setting the mbuf length to compensate for the RX descriptor and completion status area.
2012-07-03 06:59:12 +00:00
}
Reference in New Issue Copy Permalink