2005-01-06 01:43:34 +00:00
|
|
|
/*-
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
|
|
|
|
|
* All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice unmodified, this list of conditions, and the following
|
|
|
|
|
* disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
|
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
|
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
|
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
|
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
|
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
|
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
|
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
|
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
*
|
1999-08-28 01:08:13 +00:00
|
|
|
* $FreeBSD$
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
*
|
|
|
|
|
*/
|
1994-10-12 02:25:03 +00:00
|
|
|
|
|
|
|
|
/*
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
* PCIM_xxx: mask to locate subfield in register
|
|
|
|
|
* PCIR_xxx: config register offset
|
|
|
|
|
* PCIC_xxx: device class
|
|
|
|
|
* PCIS_xxx: device subclass
|
|
|
|
|
* PCIP_xxx: device programming interface
|
|
|
|
|
* PCIV_xxx: PCI vendor ID (only required to fixup ancient devices)
|
|
|
|
|
* PCID_xxx: device ID
|
2003-08-28 20:59:31 +00:00
|
|
|
* PCIY_xxx: capability identification number
|
2010-09-08 17:53:34 +00:00
|
|
|
* PCIZ_xxx: extended capability identification number
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* some PCI bus constants */
|
2009-09-10 19:27:53 +00:00
|
|
|
#define PCI_DOMAINMAX 65535 /* highest supported domain number */
|
|
|
|
|
#define PCI_BUSMAX 255 /* highest supported bus number */
|
|
|
|
|
#define PCI_SLOTMAX 31 /* highest supported slot number */
|
|
|
|
|
#define PCI_FUNCMAX 7 /* highest supported function number */
|
|
|
|
|
#define PCI_REGMAX 255 /* highest supported config register addr. */
|
2009-09-24 07:11:23 +00:00
|
|
|
#define PCIE_REGMAX 4095 /* highest supported config register addr. */
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCI_MAXHDRTYPE 2
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
|
|
|
|
|
/* PCI config header registers for all devices */
|
|
|
|
|
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIR_DEVVENDOR 0x00
|
|
|
|
|
#define PCIR_VENDOR 0x00
|
|
|
|
|
#define PCIR_DEVICE 0x02
|
|
|
|
|
#define PCIR_COMMAND 0x04
|
|
|
|
|
#define PCIM_CMD_PORTEN 0x0001
|
|
|
|
|
#define PCIM_CMD_MEMEN 0x0002
|
|
|
|
|
#define PCIM_CMD_BUSMASTEREN 0x0004
|
|
|
|
|
#define PCIM_CMD_SPECIALEN 0x0008
|
|
|
|
|
#define PCIM_CMD_MWRICEN 0x0010
|
|
|
|
|
#define PCIM_CMD_PERRESPEN 0x0040
|
|
|
|
|
#define PCIM_CMD_SERRESPEN 0x0100
|
|
|
|
|
#define PCIM_CMD_BACKTOBACK 0x0200
|
2009-03-02 19:00:41 +00:00
|
|
|
#define PCIM_CMD_INTxDIS 0x0400
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIR_STATUS 0x06
|
|
|
|
|
#define PCIM_STATUS_CAPPRESENT 0x0010
|
|
|
|
|
#define PCIM_STATUS_66CAPABLE 0x0020
|
|
|
|
|
#define PCIM_STATUS_BACKTOBACK 0x0080
|
2010-09-09 18:19:15 +00:00
|
|
|
#define PCIM_STATUS_MDPERR 0x0100
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIM_STATUS_SEL_FAST 0x0000
|
|
|
|
|
#define PCIM_STATUS_SEL_MEDIMUM 0x0200
|
|
|
|
|
#define PCIM_STATUS_SEL_SLOW 0x0400
|
|
|
|
|
#define PCIM_STATUS_SEL_MASK 0x0600
|
|
|
|
|
#define PCIM_STATUS_STABORT 0x0800
|
|
|
|
|
#define PCIM_STATUS_RTABORT 0x1000
|
|
|
|
|
#define PCIM_STATUS_RMABORT 0x2000
|
|
|
|
|
#define PCIM_STATUS_SERR 0x4000
|
|
|
|
|
#define PCIM_STATUS_PERR 0x8000
|
|
|
|
|
#define PCIR_REVID 0x08
|
|
|
|
|
#define PCIR_PROGIF 0x09
|
|
|
|
|
#define PCIR_SUBCLASS 0x0a
|
|
|
|
|
#define PCIR_CLASS 0x0b
|
|
|
|
|
#define PCIR_CACHELNSZ 0x0c
|
|
|
|
|
#define PCIR_LATTIMER 0x0d
|
|
|
|
|
#define PCIR_HDRTYPE 0x0e
|
|
|
|
|
#define PCIM_HDRTYPE 0x7f
|
|
|
|
|
#define PCIM_HDRTYPE_NORMAL 0x00
|
|
|
|
|
#define PCIM_HDRTYPE_BRIDGE 0x01
|
|
|
|
|
#define PCIM_HDRTYPE_CARDBUS 0x02
|
|
|
|
|
#define PCIM_MFDEV 0x80
|
|
|
|
|
#define PCIR_BIST 0x0f
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
|
2005-12-20 19:57:47 +00:00
|
|
|
/* Capability Register Offsets */
|
|
|
|
|
|
|
|
|
|
#define PCICAP_ID 0x0
|
|
|
|
|
#define PCICAP_NEXTPTR 0x1
|
|
|
|
|
|
2003-08-28 20:59:31 +00:00
|
|
|
/* Capability Identification Numbers */
|
|
|
|
|
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIY_PMG 0x01 /* PCI Power Management */
|
|
|
|
|
#define PCIY_AGP 0x02 /* AGP */
|
|
|
|
|
#define PCIY_VPD 0x03 /* Vital Product Data */
|
|
|
|
|
#define PCIY_SLOTID 0x04 /* Slot Identification */
|
|
|
|
|
#define PCIY_MSI 0x05 /* Message Signaled Interrupts */
|
|
|
|
|
#define PCIY_CHSWP 0x06 /* CompactPCI Hot Swap */
|
|
|
|
|
#define PCIY_PCIX 0x07 /* PCI-X */
|
|
|
|
|
#define PCIY_HT 0x08 /* HyperTransport */
|
|
|
|
|
#define PCIY_VENDOR 0x09 /* Vendor Unique */
|
|
|
|
|
#define PCIY_DEBUG 0x0a /* Debug port */
|
|
|
|
|
#define PCIY_CRES 0x0b /* CompactPCI central resource control */
|
|
|
|
|
#define PCIY_HOTPLUG 0x0c /* PCI Hot-Plug */
|
2007-01-16 17:04:42 +00:00
|
|
|
#define PCIY_SUBVENDOR 0x0d /* PCI-PCI bridge subvendor ID */
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIY_AGP8X 0x0e /* AGP 8x */
|
|
|
|
|
#define PCIY_SECDEV 0x0f /* Secure Device */
|
|
|
|
|
#define PCIY_EXPRESS 0x10 /* PCI Express */
|
|
|
|
|
#define PCIY_MSIX 0x11 /* MSI-X */
|
2009-02-15 09:49:21 +00:00
|
|
|
#define PCIY_SATA 0x12 /* SATA */
|
|
|
|
|
#define PCIY_PCIAF 0x13 /* PCI Advanced Features */
|
2003-08-28 20:59:31 +00:00
|
|
|
|
2010-09-08 17:53:34 +00:00
|
|
|
/* Extended Capability Register Fields */
|
|
|
|
|
|
|
|
|
|
#define PCIR_EXTCAP 0x100
|
|
|
|
|
#define PCIM_EXTCAP_ID 0x0000ffff
|
|
|
|
|
#define PCIM_EXTCAP_VER 0x000f0000
|
|
|
|
|
#define PCIM_EXTCAP_NEXTPTR 0xfff00000
|
|
|
|
|
#define PCI_EXTCAP_ID(ecap) ((ecap) & PCIM_EXTCAP_ID)
|
|
|
|
|
#define PCI_EXTCAP_VER(ecap) (((ecap) & PCIM_EXTCAP_VER) >> 16)
|
|
|
|
|
#define PCI_EXTCAP_NEXTPTR(ecap) (((ecap) & PCIM_EXTCAP_NEXTPTR) >> 20)
|
|
|
|
|
|
|
|
|
|
/* Extended Capability Identification Numbers */
|
|
|
|
|
|
|
|
|
|
#define PCIZ_AER 0x0001 /* Advanced Error Reporting */
|
|
|
|
|
#define PCIZ_VC 0x0002 /* Virtual Channel */
|
|
|
|
|
#define PCIZ_SERNUM 0x0003 /* Device Serial Number */
|
|
|
|
|
#define PCIZ_PWRBDGT 0x0004 /* Power Budgeting */
|
|
|
|
|
#define PCIZ_VENDOR 0x000b /* Vendor Unique */
|
|
|
|
|
#define PCIZ_ACS 0x000d /* Access Control Services */
|
|
|
|
|
#define PCIZ_ARI 0x000e /* Alternative Routing-ID Interpretation */
|
|
|
|
|
#define PCIZ_ATS 0x000f /* Address Translation Services */
|
|
|
|
|
#define PCIZ_SRIOV 0x0010 /* Single Root IO Virtualization */
|
|
|
|
|
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
/* config registers for header type 0 devices */
|
|
|
|
|
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIR_BARS 0x10
|
2007-05-16 18:42:38 +00:00
|
|
|
#define PCIR_BAR(x) (PCIR_BARS + (x) * 4)
|
2009-02-02 19:54:16 +00:00
|
|
|
#define PCIR_MAX_BAR_0 5
|
2007-05-16 18:42:38 +00:00
|
|
|
#define PCI_RID2BAR(rid) (((rid) - PCIR_BARS) / 4)
|
2007-03-31 21:39:02 +00:00
|
|
|
#define PCI_BAR_IO(x) (((x) & PCIM_BAR_SPACE) == PCIM_BAR_IO_SPACE)
|
|
|
|
|
#define PCI_BAR_MEM(x) (((x) & PCIM_BAR_SPACE) == PCIM_BAR_MEM_SPACE)
|
|
|
|
|
#define PCIM_BAR_SPACE 0x00000001
|
|
|
|
|
#define PCIM_BAR_MEM_SPACE 0
|
|
|
|
|
#define PCIM_BAR_IO_SPACE 1
|
|
|
|
|
#define PCIM_BAR_MEM_TYPE 0x00000006
|
|
|
|
|
#define PCIM_BAR_MEM_32 0
|
|
|
|
|
#define PCIM_BAR_MEM_1MB 2 /* Locate below 1MB in PCI <= 2.1 */
|
|
|
|
|
#define PCIM_BAR_MEM_64 4
|
|
|
|
|
#define PCIM_BAR_MEM_PREFETCH 0x00000008
|
2009-03-05 15:33:04 +00:00
|
|
|
#define PCIM_BAR_MEM_BASE 0xfffffffffffffff0ULL
|
2007-03-31 21:39:02 +00:00
|
|
|
#define PCIM_BAR_IO_RESERVED 0x00000002
|
|
|
|
|
#define PCIM_BAR_IO_BASE 0xfffffffc
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIR_CIS 0x28
|
2008-11-03 15:38:45 +00:00
|
|
|
#define PCIM_CIS_ASI_MASK 0x00000007
|
2007-05-16 18:42:38 +00:00
|
|
|
#define PCIM_CIS_ASI_CONFIG 0
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIM_CIS_ASI_BAR0 1
|
|
|
|
|
#define PCIM_CIS_ASI_BAR1 2
|
|
|
|
|
#define PCIM_CIS_ASI_BAR2 3
|
|
|
|
|
#define PCIM_CIS_ASI_BAR3 4
|
|
|
|
|
#define PCIM_CIS_ASI_BAR4 5
|
|
|
|
|
#define PCIM_CIS_ASI_BAR5 6
|
|
|
|
|
#define PCIM_CIS_ASI_ROM 7
|
|
|
|
|
#define PCIM_CIS_ADDR_MASK 0x0ffffff8
|
|
|
|
|
#define PCIM_CIS_ROM_MASK 0xf0000000
|
2007-05-16 18:42:38 +00:00
|
|
|
#define PCIM_CIS_CONFIG_MASK 0xff
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIR_SUBVEND_0 0x2c
|
|
|
|
|
#define PCIR_SUBDEV_0 0x2e
|
|
|
|
|
#define PCIR_BIOS 0x30
|
|
|
|
|
#define PCIM_BIOS_ENABLE 0x01
|
|
|
|
|
#define PCIM_BIOS_ADDR_MASK 0xfffff800
|
2000-12-20 14:36:52 +00:00
|
|
|
#define PCIR_CAP_PTR 0x34
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIR_INTLINE 0x3c
|
|
|
|
|
#define PCIR_INTPIN 0x3d
|
|
|
|
|
#define PCIR_MINGNT 0x3e
|
|
|
|
|
#define PCIR_MAXLAT 0x3f
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
|
2005-03-26 20:31:09 +00:00
|
|
|
/* config registers for header type 1 (PCI-to-PCI bridge) devices */
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
|
2009-02-02 19:54:16 +00:00
|
|
|
#define PCIR_MAX_BAR_1 1
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIR_SECSTAT_1 0x1e
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIR_PRIBUS_1 0x18
|
|
|
|
|
#define PCIR_SECBUS_1 0x19
|
|
|
|
|
#define PCIR_SUBBUS_1 0x1a
|
|
|
|
|
#define PCIR_SECLAT_1 0x1b
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIR_IOBASEL_1 0x1c
|
|
|
|
|
#define PCIR_IOLIMITL_1 0x1d
|
|
|
|
|
#define PCIR_IOBASEH_1 0x30
|
|
|
|
|
#define PCIR_IOLIMITH_1 0x32
|
|
|
|
|
#define PCIM_BRIO_16 0x0
|
|
|
|
|
#define PCIM_BRIO_32 0x1
|
|
|
|
|
#define PCIM_BRIO_MASK 0xf
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIR_MEMBASE_1 0x20
|
|
|
|
|
#define PCIR_MEMLIMIT_1 0x22
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIR_PMBASEL_1 0x24
|
|
|
|
|
#define PCIR_PMLIMITL_1 0x26
|
|
|
|
|
#define PCIR_PMBASEH_1 0x28
|
|
|
|
|
#define PCIR_PMLIMITH_1 0x2c
|
2008-08-20 18:29:59 +00:00
|
|
|
#define PCIM_BRPM_32 0x0
|
|
|
|
|
#define PCIM_BRPM_64 0x1
|
|
|
|
|
#define PCIM_BRPM_MASK 0xf
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
|
2011-03-31 13:22:12 +00:00
|
|
|
#define PCIR_BIOS_1 0x38
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIR_BRIDGECTL_1 0x3e
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
|
2005-03-26 20:31:09 +00:00
|
|
|
/* config registers for header type 2 (CardBus) devices */
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
|
2009-02-02 19:54:16 +00:00
|
|
|
#define PCIR_MAX_BAR_2 0
|
2005-10-29 05:49:06 +00:00
|
|
|
#define PCIR_CAP_PTR_2 0x14
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIR_SECSTAT_2 0x16
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIR_PRIBUS_2 0x18
|
|
|
|
|
#define PCIR_SECBUS_2 0x19
|
|
|
|
|
#define PCIR_SUBBUS_2 0x1a
|
|
|
|
|
#define PCIR_SECLAT_2 0x1b
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIR_MEMBASE0_2 0x1c
|
|
|
|
|
#define PCIR_MEMLIMIT0_2 0x20
|
|
|
|
|
#define PCIR_MEMBASE1_2 0x24
|
|
|
|
|
#define PCIR_MEMLIMIT1_2 0x28
|
|
|
|
|
#define PCIR_IOBASE0_2 0x2c
|
|
|
|
|
#define PCIR_IOLIMIT0_2 0x30
|
|
|
|
|
#define PCIR_IOBASE1_2 0x34
|
|
|
|
|
#define PCIR_IOLIMIT1_2 0x38
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIR_BRIDGECTL_2 0x3e
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIR_SUBVEND_2 0x40
|
|
|
|
|
#define PCIR_SUBDEV_2 0x42
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIR_PCCARDIF_2 0x44
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
|
|
|
|
|
/* PCI device class, subclass and programming interface definitions */
|
|
|
|
|
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIC_OLD 0x00
|
|
|
|
|
#define PCIS_OLD_NONVGA 0x00
|
|
|
|
|
#define PCIS_OLD_VGA 0x01
|
|
|
|
|
|
|
|
|
|
#define PCIC_STORAGE 0x01
|
|
|
|
|
#define PCIS_STORAGE_SCSI 0x00
|
|
|
|
|
#define PCIS_STORAGE_IDE 0x01
|
|
|
|
|
#define PCIP_STORAGE_IDE_MODEPRIM 0x01
|
|
|
|
|
#define PCIP_STORAGE_IDE_PROGINDPRIM 0x02
|
|
|
|
|
#define PCIP_STORAGE_IDE_MODESEC 0x04
|
|
|
|
|
#define PCIP_STORAGE_IDE_PROGINDSEC 0x08
|
|
|
|
|
#define PCIP_STORAGE_IDE_MASTERDEV 0x80
|
|
|
|
|
#define PCIS_STORAGE_FLOPPY 0x02
|
|
|
|
|
#define PCIS_STORAGE_IPI 0x03
|
|
|
|
|
#define PCIS_STORAGE_RAID 0x04
|
2007-03-31 20:41:00 +00:00
|
|
|
#define PCIS_STORAGE_ATA_ADMA 0x05
|
|
|
|
|
#define PCIS_STORAGE_SATA 0x06
|
|
|
|
|
#define PCIP_STORAGE_SATA_AHCI_1_0 0x01
|
|
|
|
|
#define PCIS_STORAGE_SAS 0x07
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIS_STORAGE_OTHER 0x80
|
|
|
|
|
|
|
|
|
|
#define PCIC_NETWORK 0x02
|
|
|
|
|
#define PCIS_NETWORK_ETHERNET 0x00
|
|
|
|
|
#define PCIS_NETWORK_TOKENRING 0x01
|
|
|
|
|
#define PCIS_NETWORK_FDDI 0x02
|
|
|
|
|
#define PCIS_NETWORK_ATM 0x03
|
|
|
|
|
#define PCIS_NETWORK_ISDN 0x04
|
2007-03-31 20:41:00 +00:00
|
|
|
#define PCIS_NETWORK_WORLDFIP 0x05
|
|
|
|
|
#define PCIS_NETWORK_PICMG 0x06
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIS_NETWORK_OTHER 0x80
|
|
|
|
|
|
|
|
|
|
#define PCIC_DISPLAY 0x03
|
|
|
|
|
#define PCIS_DISPLAY_VGA 0x00
|
|
|
|
|
#define PCIS_DISPLAY_XGA 0x01
|
|
|
|
|
#define PCIS_DISPLAY_3D 0x02
|
|
|
|
|
#define PCIS_DISPLAY_OTHER 0x80
|
|
|
|
|
|
|
|
|
|
#define PCIC_MULTIMEDIA 0x04
|
|
|
|
|
#define PCIS_MULTIMEDIA_VIDEO 0x00
|
|
|
|
|
#define PCIS_MULTIMEDIA_AUDIO 0x01
|
|
|
|
|
#define PCIS_MULTIMEDIA_TELE 0x02
|
2008-10-21 21:53:55 +00:00
|
|
|
#define PCIS_MULTIMEDIA_HDA 0x03
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIS_MULTIMEDIA_OTHER 0x80
|
|
|
|
|
|
|
|
|
|
#define PCIC_MEMORY 0x05
|
|
|
|
|
#define PCIS_MEMORY_RAM 0x00
|
|
|
|
|
#define PCIS_MEMORY_FLASH 0x01
|
|
|
|
|
#define PCIS_MEMORY_OTHER 0x80
|
|
|
|
|
|
|
|
|
|
#define PCIC_BRIDGE 0x06
|
|
|
|
|
#define PCIS_BRIDGE_HOST 0x00
|
|
|
|
|
#define PCIS_BRIDGE_ISA 0x01
|
|
|
|
|
#define PCIS_BRIDGE_EISA 0x02
|
|
|
|
|
#define PCIS_BRIDGE_MCA 0x03
|
|
|
|
|
#define PCIS_BRIDGE_PCI 0x04
|
2007-03-31 20:41:00 +00:00
|
|
|
#define PCIP_BRIDGE_PCI_SUBTRACTIVE 0x01
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIS_BRIDGE_PCMCIA 0x05
|
|
|
|
|
#define PCIS_BRIDGE_NUBUS 0x06
|
|
|
|
|
#define PCIS_BRIDGE_CARDBUS 0x07
|
|
|
|
|
#define PCIS_BRIDGE_RACEWAY 0x08
|
2007-03-31 20:41:00 +00:00
|
|
|
#define PCIS_BRIDGE_PCI_TRANSPARENT 0x09
|
|
|
|
|
#define PCIS_BRIDGE_INFINIBAND 0x0a
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIS_BRIDGE_OTHER 0x80
|
|
|
|
|
|
|
|
|
|
#define PCIC_SIMPLECOMM 0x07
|
|
|
|
|
#define PCIS_SIMPLECOMM_UART 0x00
|
2007-03-05 16:18:31 +00:00
|
|
|
#define PCIP_SIMPLECOMM_UART_8250 0x00
|
|
|
|
|
#define PCIP_SIMPLECOMM_UART_16450A 0x01
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIP_SIMPLECOMM_UART_16550A 0x02
|
2007-03-05 16:18:31 +00:00
|
|
|
#define PCIP_SIMPLECOMM_UART_16650A 0x03
|
|
|
|
|
#define PCIP_SIMPLECOMM_UART_16750A 0x04
|
|
|
|
|
#define PCIP_SIMPLECOMM_UART_16850A 0x05
|
|
|
|
|
#define PCIP_SIMPLECOMM_UART_16950A 0x06
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIS_SIMPLECOMM_PAR 0x01
|
|
|
|
|
#define PCIS_SIMPLECOMM_MULSER 0x02
|
|
|
|
|
#define PCIS_SIMPLECOMM_MODEM 0x03
|
2007-03-31 20:41:00 +00:00
|
|
|
#define PCIS_SIMPLECOMM_GPIB 0x04
|
|
|
|
|
#define PCIS_SIMPLECOMM_SMART_CARD 0x05
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIS_SIMPLECOMM_OTHER 0x80
|
|
|
|
|
|
|
|
|
|
#define PCIC_BASEPERIPH 0x08
|
|
|
|
|
#define PCIS_BASEPERIPH_PIC 0x00
|
2007-03-05 16:18:31 +00:00
|
|
|
#define PCIP_BASEPERIPH_PIC_8259A 0x00
|
|
|
|
|
#define PCIP_BASEPERIPH_PIC_ISA 0x01
|
|
|
|
|
#define PCIP_BASEPERIPH_PIC_EISA 0x02
|
|
|
|
|
#define PCIP_BASEPERIPH_PIC_IO_APIC 0x10
|
|
|
|
|
#define PCIP_BASEPERIPH_PIC_IOX_APIC 0x20
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIS_BASEPERIPH_DMA 0x01
|
|
|
|
|
#define PCIS_BASEPERIPH_TIMER 0x02
|
|
|
|
|
#define PCIS_BASEPERIPH_RTC 0x03
|
|
|
|
|
#define PCIS_BASEPERIPH_PCIHOT 0x04
|
|
|
|
|
#define PCIS_BASEPERIPH_SDHC 0x05
|
|
|
|
|
#define PCIS_BASEPERIPH_OTHER 0x80
|
|
|
|
|
|
|
|
|
|
#define PCIC_INPUTDEV 0x09
|
|
|
|
|
#define PCIS_INPUTDEV_KEYBOARD 0x00
|
|
|
|
|
#define PCIS_INPUTDEV_DIGITIZER 0x01
|
|
|
|
|
#define PCIS_INPUTDEV_MOUSE 0x02
|
|
|
|
|
#define PCIS_INPUTDEV_SCANNER 0x03
|
|
|
|
|
#define PCIS_INPUTDEV_GAMEPORT 0x04
|
|
|
|
|
#define PCIS_INPUTDEV_OTHER 0x80
|
|
|
|
|
|
|
|
|
|
#define PCIC_DOCKING 0x0a
|
|
|
|
|
#define PCIS_DOCKING_GENERIC 0x00
|
|
|
|
|
#define PCIS_DOCKING_OTHER 0x80
|
|
|
|
|
|
|
|
|
|
#define PCIC_PROCESSOR 0x0b
|
|
|
|
|
#define PCIS_PROCESSOR_386 0x00
|
|
|
|
|
#define PCIS_PROCESSOR_486 0x01
|
|
|
|
|
#define PCIS_PROCESSOR_PENTIUM 0x02
|
|
|
|
|
#define PCIS_PROCESSOR_ALPHA 0x10
|
|
|
|
|
#define PCIS_PROCESSOR_POWERPC 0x20
|
|
|
|
|
#define PCIS_PROCESSOR_MIPS 0x30
|
|
|
|
|
#define PCIS_PROCESSOR_COPROC 0x40
|
|
|
|
|
|
|
|
|
|
#define PCIC_SERIALBUS 0x0c
|
|
|
|
|
#define PCIS_SERIALBUS_FW 0x00
|
|
|
|
|
#define PCIS_SERIALBUS_ACCESS 0x01
|
|
|
|
|
#define PCIS_SERIALBUS_SSA 0x02
|
|
|
|
|
#define PCIS_SERIALBUS_USB 0x03
|
2007-03-31 20:41:00 +00:00
|
|
|
#define PCIP_SERIALBUS_USB_UHCI 0x00
|
|
|
|
|
#define PCIP_SERIALBUS_USB_OHCI 0x10
|
|
|
|
|
#define PCIP_SERIALBUS_USB_EHCI 0x20
|
2011-05-17 11:23:43 +00:00
|
|
|
#define PCIP_SERIALBUS_USB_XHCI 0x30
|
2007-03-31 20:41:00 +00:00
|
|
|
#define PCIP_SERIALBUS_USB_DEVICE 0xfe
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIS_SERIALBUS_FC 0x04
|
|
|
|
|
#define PCIS_SERIALBUS_SMBUS 0x05
|
2007-03-31 20:41:00 +00:00
|
|
|
#define PCIS_SERIALBUS_INFINIBAND 0x06
|
|
|
|
|
#define PCIS_SERIALBUS_IPMI 0x07
|
|
|
|
|
#define PCIP_SERIALBUS_IPMI_SMIC 0x00
|
|
|
|
|
#define PCIP_SERIALBUS_IPMI_KCS 0x01
|
|
|
|
|
#define PCIP_SERIALBUS_IPMI_BT 0x02
|
|
|
|
|
#define PCIS_SERIALBUS_SERCOS 0x08
|
|
|
|
|
#define PCIS_SERIALBUS_CANBUS 0x09
|
2006-12-14 16:53:48 +00:00
|
|
|
|
|
|
|
|
#define PCIC_WIRELESS 0x0d
|
|
|
|
|
#define PCIS_WIRELESS_IRDA 0x00
|
|
|
|
|
#define PCIS_WIRELESS_IR 0x01
|
|
|
|
|
#define PCIS_WIRELESS_RF 0x10
|
2007-03-31 20:41:00 +00:00
|
|
|
#define PCIS_WIRELESS_BLUETOOTH 0x11
|
|
|
|
|
#define PCIS_WIRELESS_BROADBAND 0x12
|
|
|
|
|
#define PCIS_WIRELESS_80211A 0x20
|
|
|
|
|
#define PCIS_WIRELESS_80211B 0x21
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIS_WIRELESS_OTHER 0x80
|
|
|
|
|
|
|
|
|
|
#define PCIC_INTELLIIO 0x0e
|
|
|
|
|
#define PCIS_INTELLIIO_I2O 0x00
|
|
|
|
|
|
|
|
|
|
#define PCIC_SATCOM 0x0f
|
|
|
|
|
#define PCIS_SATCOM_TV 0x01
|
|
|
|
|
#define PCIS_SATCOM_AUDIO 0x02
|
|
|
|
|
#define PCIS_SATCOM_VOICE 0x03
|
|
|
|
|
#define PCIS_SATCOM_DATA 0x04
|
|
|
|
|
|
|
|
|
|
#define PCIC_CRYPTO 0x10
|
|
|
|
|
#define PCIS_CRYPTO_NETCOMP 0x00
|
|
|
|
|
#define PCIS_CRYPTO_ENTERTAIN 0x10
|
|
|
|
|
#define PCIS_CRYPTO_OTHER 0x80
|
|
|
|
|
|
|
|
|
|
#define PCIC_DASP 0x11
|
2007-03-31 20:41:00 +00:00
|
|
|
#define PCIS_DASP_DPIO 0x00
|
|
|
|
|
#define PCIS_DASP_PERFCNTRS 0x01
|
|
|
|
|
#define PCIS_DASP_COMM_SYNC 0x10
|
|
|
|
|
#define PCIS_DASP_MGMT_CARD 0x20
|
|
|
|
|
#define PCIS_DASP_OTHER 0x80
|
2006-12-14 16:53:48 +00:00
|
|
|
|
|
|
|
|
#define PCIC_OTHER 0xff
|
Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .
The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...
This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.
A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:
1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
and are probed like any "standard" PCI device.
The following features are currently missing, but will be added back,
soon:
1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets
This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
|
|
|
|
2005-04-29 01:58:27 +00:00
|
|
|
/* Bridge Control Values. */
|
|
|
|
|
#define PCIB_BCR_PERR_ENABLE 0x0001
|
|
|
|
|
#define PCIB_BCR_SERR_ENABLE 0x0002
|
|
|
|
|
#define PCIB_BCR_ISA_ENABLE 0x0004
|
|
|
|
|
#define PCIB_BCR_VGA_ENABLE 0x0008
|
|
|
|
|
#define PCIB_BCR_MASTER_ABORT_MODE 0x0020
|
|
|
|
|
#define PCIB_BCR_SECBUS_RESET 0x0040
|
|
|
|
|
#define PCIB_BCR_SECBUS_BACKTOBACK 0x0080
|
|
|
|
|
#define PCIB_BCR_PRI_DISCARD_TIMEOUT 0x0100
|
|
|
|
|
#define PCIB_BCR_SEC_DISCARD_TIMEOUT 0x0200
|
|
|
|
|
#define PCIB_BCR_DISCARD_TIMER_STATUS 0x0400
|
|
|
|
|
#define PCIB_BCR_DISCARD_TIMER_SERREN 0x0800
|
|
|
|
|
|
2000-12-13 01:25:11 +00:00
|
|
|
/* PCI power manangement */
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIR_POWER_CAP 0x2
|
|
|
|
|
#define PCIM_PCAP_SPEC 0x0007
|
|
|
|
|
#define PCIM_PCAP_PMEREQCLK 0x0008
|
|
|
|
|
#define PCIM_PCAP_DEVSPECINIT 0x0020
|
2010-10-20 23:41:16 +00:00
|
|
|
#define PCIM_PCAP_AUXPWR_0 0x0000
|
|
|
|
|
#define PCIM_PCAP_AUXPWR_55 0x0040
|
|
|
|
|
#define PCIM_PCAP_AUXPWR_100 0x0080
|
|
|
|
|
#define PCIM_PCAP_AUXPWR_160 0x00c0
|
|
|
|
|
#define PCIM_PCAP_AUXPWR_220 0x0100
|
|
|
|
|
#define PCIM_PCAP_AUXPWR_270 0x0140
|
|
|
|
|
#define PCIM_PCAP_AUXPWR_320 0x0180
|
|
|
|
|
#define PCIM_PCAP_AUXPWR_375 0x01c0
|
|
|
|
|
#define PCIM_PCAP_AUXPWRMASK 0x01c0
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIM_PCAP_D1SUPP 0x0200
|
|
|
|
|
#define PCIM_PCAP_D2SUPP 0x0400
|
2007-09-19 13:05:58 +00:00
|
|
|
#define PCIM_PCAP_D0PME 0x0800
|
|
|
|
|
#define PCIM_PCAP_D1PME 0x1000
|
|
|
|
|
#define PCIM_PCAP_D2PME 0x2000
|
|
|
|
|
#define PCIM_PCAP_D3PME_HOT 0x4000
|
|
|
|
|
#define PCIM_PCAP_D3PME_COLD 0x8000
|
2006-12-14 16:53:48 +00:00
|
|
|
|
|
|
|
|
#define PCIR_POWER_STATUS 0x4
|
|
|
|
|
#define PCIM_PSTAT_D0 0x0000
|
|
|
|
|
#define PCIM_PSTAT_D1 0x0001
|
|
|
|
|
#define PCIM_PSTAT_D2 0x0002
|
|
|
|
|
#define PCIM_PSTAT_D3 0x0003
|
|
|
|
|
#define PCIM_PSTAT_DMASK 0x0003
|
2010-10-20 23:41:16 +00:00
|
|
|
#define PCIM_PSTAT_NOSOFTRESET 0x0008
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIM_PSTAT_PMEENABLE 0x0100
|
|
|
|
|
#define PCIM_PSTAT_D0POWER 0x0000
|
|
|
|
|
#define PCIM_PSTAT_D1POWER 0x0200
|
|
|
|
|
#define PCIM_PSTAT_D2POWER 0x0400
|
|
|
|
|
#define PCIM_PSTAT_D3POWER 0x0600
|
|
|
|
|
#define PCIM_PSTAT_D0HEAT 0x0800
|
2010-10-20 23:41:16 +00:00
|
|
|
#define PCIM_PSTAT_D1HEAT 0x0a00
|
|
|
|
|
#define PCIM_PSTAT_D2HEAT 0x0c00
|
|
|
|
|
#define PCIM_PSTAT_D3HEAT 0x0e00
|
|
|
|
|
#define PCIM_PSTAT_DATASELMASK 0x1e00
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIM_PSTAT_DATAUNKN 0x0000
|
|
|
|
|
#define PCIM_PSTAT_DATADIV10 0x2000
|
|
|
|
|
#define PCIM_PSTAT_DATADIV100 0x4000
|
|
|
|
|
#define PCIM_PSTAT_DATADIV1000 0x6000
|
|
|
|
|
#define PCIM_PSTAT_DATADIVMASK 0x6000
|
|
|
|
|
#define PCIM_PSTAT_PME 0x8000
|
|
|
|
|
|
2010-10-20 23:41:16 +00:00
|
|
|
#define PCIR_POWER_BSE 0x6
|
|
|
|
|
#define PCIM_PMCSR_BSE_D3B3 0x00
|
|
|
|
|
#define PCIM_PMCSR_BSE_D3B2 0x40
|
|
|
|
|
#define PCIM_PMCSR_BSE_BPCCE 0x80
|
2006-12-14 16:53:48 +00:00
|
|
|
|
|
|
|
|
#define PCIR_POWER_DATA 0x7
|
2000-12-13 01:25:11 +00:00
|
|
|
|
2007-03-05 16:18:31 +00:00
|
|
|
/* VPD capability registers */
|
|
|
|
|
#define PCIR_VPD_ADDR 0x2
|
|
|
|
|
#define PCIR_VPD_DATA 0x4
|
|
|
|
|
|
2003-09-14 14:42:26 +00:00
|
|
|
/* PCI Message Signalled Interrupts (MSI) */
|
2006-12-14 16:53:48 +00:00
|
|
|
#define PCIR_MSI_CTRL 0x2
|
|
|
|
|
#define PCIM_MSICTRL_VECTOR 0x0100
|
|
|
|
|
#define PCIM_MSICTRL_64BIT 0x0080
|
|
|
|
|
#define PCIM_MSICTRL_MME_MASK 0x0070
|
|
|
|
|
#define PCIM_MSICTRL_MME_1 0x0000
|
|
|
|
|
#define PCIM_MSICTRL_MME_2 0x0010
|
|
|
|
|
#define PCIM_MSICTRL_MME_4 0x0020
|
|
|
|
|
#define PCIM_MSICTRL_MME_8 0x0030
|
|
|
|
|
#define PCIM_MSICTRL_MME_16 0x0040
|
|
|
|
|
#define PCIM_MSICTRL_MME_32 0x0050
|
|
|
|
|
#define PCIM_MSICTRL_MMC_MASK 0x000E
|
|
|
|
|
#define PCIM_MSICTRL_MMC_1 0x0000
|
|
|
|
|
#define PCIM_MSICTRL_MMC_2 0x0002
|
|
|
|
|
#define PCIM_MSICTRL_MMC_4 0x0004
|
|
|
|
|
#define PCIM_MSICTRL_MMC_8 0x0006
|
|
|
|
|
#define PCIM_MSICTRL_MMC_16 0x0008
|
|
|
|
|
#define PCIM_MSICTRL_MMC_32 0x000A
|
|
|
|
|
#define PCIM_MSICTRL_MSI_ENABLE 0x0001
|
|
|
|
|
#define PCIR_MSI_ADDR 0x4
|
|
|
|
|
#define PCIR_MSI_ADDR_HIGH 0x8
|
|
|
|
|
#define PCIR_MSI_DATA 0x8
|
|
|
|
|
#define PCIR_MSI_DATA_64BIT 0xc
|
|
|
|
|
#define PCIR_MSI_MASK 0x10
|
|
|
|
|
#define PCIR_MSI_PENDING 0x14
|
2003-09-14 14:42:26 +00:00
|
|
|
|
2002-06-05 22:25:51 +00:00
|
|
|
/* PCI-X definitions */
|
2007-01-19 22:37:52 +00:00
|
|
|
|
|
|
|
|
/* For header type 0 devices */
|
|
|
|
|
#define PCIXR_COMMAND 0x2
|
|
|
|
|
#define PCIXM_COMMAND_DPERR_E 0x0001 /* Data Parity Error Recovery */
|
|
|
|
|
#define PCIXM_COMMAND_ERO 0x0002 /* Enable Relaxed Ordering */
|
|
|
|
|
#define PCIXM_COMMAND_MAX_READ 0x000c /* Maximum Burst Read Count */
|
|
|
|
|
#define PCIXM_COMMAND_MAX_READ_512 0x0000
|
|
|
|
|
#define PCIXM_COMMAND_MAX_READ_1024 0x0004
|
|
|
|
|
#define PCIXM_COMMAND_MAX_READ_2048 0x0008
|
|
|
|
|
#define PCIXM_COMMAND_MAX_READ_4096 0x000c
|
|
|
|
|
#define PCIXM_COMMAND_MAX_SPLITS 0x0070 /* Maximum Split Transactions */
|
|
|
|
|
#define PCIXM_COMMAND_MAX_SPLITS_1 0x0000
|
|
|
|
|
#define PCIXM_COMMAND_MAX_SPLITS_2 0x0010
|
|
|
|
|
#define PCIXM_COMMAND_MAX_SPLITS_3 0x0020
|
|
|
|
|
#define PCIXM_COMMAND_MAX_SPLITS_4 0x0030
|
|
|
|
|
#define PCIXM_COMMAND_MAX_SPLITS_8 0x0040
|
|
|
|
|
#define PCIXM_COMMAND_MAX_SPLITS_12 0x0050
|
|
|
|
|
#define PCIXM_COMMAND_MAX_SPLITS_16 0x0060
|
|
|
|
|
#define PCIXM_COMMAND_MAX_SPLITS_32 0x0070
|
|
|
|
|
#define PCIXM_COMMAND_VERSION 0x3000
|
|
|
|
|
#define PCIXR_STATUS 0x4
|
|
|
|
|
#define PCIXM_STATUS_DEVFN 0x000000FF
|
|
|
|
|
#define PCIXM_STATUS_BUS 0x0000FF00
|
|
|
|
|
#define PCIXM_STATUS_64BIT 0x00010000
|
|
|
|
|
#define PCIXM_STATUS_133CAP 0x00020000
|
|
|
|
|
#define PCIXM_STATUS_SC_DISCARDED 0x00040000
|
|
|
|
|
#define PCIXM_STATUS_UNEXP_SC 0x00080000
|
|
|
|
|
#define PCIXM_STATUS_COMPLEX_DEV 0x00100000
|
|
|
|
|
#define PCIXM_STATUS_MAX_READ 0x00600000
|
|
|
|
|
#define PCIXM_STATUS_MAX_READ_512 0x00000000
|
|
|
|
|
#define PCIXM_STATUS_MAX_READ_1024 0x00200000
|
|
|
|
|
#define PCIXM_STATUS_MAX_READ_2048 0x00400000
|
|
|
|
|
#define PCIXM_STATUS_MAX_READ_4096 0x00600000
|
|
|
|
|
#define PCIXM_STATUS_MAX_SPLITS 0x03800000
|
|
|
|
|
#define PCIXM_STATUS_MAX_SPLITS_1 0x00000000
|
|
|
|
|
#define PCIXM_STATUS_MAX_SPLITS_2 0x00800000
|
|
|
|
|
#define PCIXM_STATUS_MAX_SPLITS_3 0x01000000
|
|
|
|
|
#define PCIXM_STATUS_MAX_SPLITS_4 0x01800000
|
|
|
|
|
#define PCIXM_STATUS_MAX_SPLITS_8 0x02000000
|
|
|
|
|
#define PCIXM_STATUS_MAX_SPLITS_12 0x02800000
|
|
|
|
|
#define PCIXM_STATUS_MAX_SPLITS_16 0x03000000
|
|
|
|
|
#define PCIXM_STATUS_MAX_SPLITS_32 0x03800000
|
|
|
|
|
#define PCIXM_STATUS_MAX_CUM_READ 0x1C000000
|
|
|
|
|
#define PCIXM_STATUS_RCVD_SC_ERR 0x20000000
|
|
|
|
|
#define PCIXM_STATUS_266CAP 0x40000000
|
|
|
|
|
#define PCIXM_STATUS_533CAP 0x80000000
|
|
|
|
|
|
|
|
|
|
/* For header type 1 devices (PCI-X bridges) */
|
|
|
|
|
#define PCIXR_SEC_STATUS 0x2
|
|
|
|
|
#define PCIXM_SEC_STATUS_64BIT 0x0001
|
|
|
|
|
#define PCIXM_SEC_STATUS_133CAP 0x0002
|
|
|
|
|
#define PCIXM_SEC_STATUS_SC_DISC 0x0004
|
|
|
|
|
#define PCIXM_SEC_STATUS_UNEXP_SC 0x0008
|
|
|
|
|
#define PCIXM_SEC_STATUS_SC_OVERRUN 0x0010
|
|
|
|
|
#define PCIXM_SEC_STATUS_SR_DELAYED 0x0020
|
|
|
|
|
#define PCIXM_SEC_STATUS_BUS_MODE 0x03c0
|
|
|
|
|
#define PCIXM_SEC_STATUS_VERSION 0x3000
|
|
|
|
|
#define PCIXM_SEC_STATUS_266CAP 0x4000
|
|
|
|
|
#define PCIXM_SEC_STATUS_533CAP 0x8000
|
|
|
|
|
#define PCIXR_BRIDGE_STATUS 0x4
|
|
|
|
|
#define PCIXM_BRIDGE_STATUS_DEVFN 0x000000FF
|
|
|
|
|
#define PCIXM_BRIDGE_STATUS_BUS 0x0000FF00
|
|
|
|
|
#define PCIXM_BRIDGE_STATUS_64BIT 0x00010000
|
|
|
|
|
#define PCIXM_BRIDGE_STATUS_133CAP 0x00020000
|
|
|
|
|
#define PCIXM_BRIDGE_STATUS_SC_DISCARDED 0x00040000
|
|
|
|
|
#define PCIXM_BRIDGE_STATUS_UNEXP_SC 0x00080000
|
|
|
|
|
#define PCIXM_BRIDGE_STATUS_SC_OVERRUN 0x00100000
|
|
|
|
|
#define PCIXM_BRIDGE_STATUS_SR_DELAYED 0x00200000
|
|
|
|
|
#define PCIXM_BRIDGE_STATUS_DEVID_MSGCAP 0x20000000
|
|
|
|
|
#define PCIXM_BRIDGE_STATUS_266CAP 0x40000000
|
|
|
|
|
#define PCIXM_BRIDGE_STATUS_533CAP 0x80000000
|
First cut at MI support for PCI Message Signalled Interrupts (MSI):
- Add 3 new functions to the pci_if interface along with suitable wrappers
to provide the device driver visible API:
- pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI(). '*count'
here is an in and out parameter. The driver stores the desired number
of messages in '*count' before calling the function. On success,
'*count' holds the number of messages allocated to the device. Also on
success, the driver can access the messages as SYS_RES_IRQ resources
starting at rid 1. Note that the legacy INTx interrupt resource will
not be available when using MSI. Note that this function will allocate
either MSI or MSI-X messages depending on the devices capabilities and
the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. Also note
that the driver should activate the memory resource that holds the
MSI-X table and pending bit array (PBA) before calling this function
if the device supports MSI-X.
- pci_release_msi(dev) backed by PCI_RELEASE_MSI(). This function
releases the messages allocated for this device. All of the
SYS_RES_IRQ resources need to be released for this function to succeed.
- pci_msi_count(dev) backed by PCI_MSI_COUNT(). This function returns
the maximum number of MSI or MSI-X messages supported by this device.
MSI-X is preferred if present, but this function will honor the
'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. This function
should return the largest value that pci_alloc_msi() can return
(assuming the MD code is able to allocate sufficient backing resources
for all of the messages).
- Add default implementations for these 3 methods to the pci_driver generic
PCI bus driver. (The various other PCI bus drivers such as for ACPI and
OFW will inherit these default implementations.) This default
implementation depends on 4 new pcib_if methods that bubble up through
the PCI bridges to the MD code to allocate IRQ values and perform any
needed MD setup code needed:
- PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages.
- PCIB_RELEASE_MSI() releases a group of MSI messages.
- PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message.
- PCIB_RELEASE_MSIX() releases a single MSI-X message.
- Add default implementations for these 4 methods that just pass the
request up to the parent bus's parent bridge driver and use the
default implementation in the various MI PCI bridge drivers.
- Add MI functions for use by MD code when managing MSI and MSI-X
interrupts:
- pci_enable_msi(dev, address, data) programs the MSI capability address
and data registers for a group of MSI messages
- pci_enable_msix(dev, index, address, data) initializes a single MSI-X
message in the MSI-X table
- pci_mask_msix(dev, index) masks a single MSI-X message
- pci_unmask_msix(dev, index) unmasks a single MSI-X message
- pci_pending_msix(dev, index) returns true if the specified MSI-X
message is currently pending
- Save the MSI capability address and data registers in the pci_cfgreg
block in a PCI devices ivars and restore the values when a device is
resumed. Note that the MSI-X table is not currently restored during
resume.
- Add constants for MSI-X register offsets and fields.
- Record interesting data about any MSI-X capability blocks we come
across in the pci_cfgreg block in the ivars for PCI devices.
Tested on: em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X)
Reviewed by: scottl, grehan, jfv
MFC after: 2 months
2006-11-13 21:47:30 +00:00
|
|
|
|
2006-12-12 19:33:25 +00:00
|
|
|
/* HT (HyperTransport) Capability definitions */
|
|
|
|
|
#define PCIR_HT_COMMAND 0x2
|
|
|
|
|
#define PCIM_HTCMD_CAP_MASK 0xf800 /* Capability type. */
|
|
|
|
|
#define PCIM_HTCAP_SLAVE 0x0000 /* 000xx */
|
|
|
|
|
#define PCIM_HTCAP_HOST 0x2000 /* 001xx */
|
|
|
|
|
#define PCIM_HTCAP_SWITCH 0x4000 /* 01000 */
|
|
|
|
|
#define PCIM_HTCAP_INTERRUPT 0x8000 /* 10000 */
|
|
|
|
|
#define PCIM_HTCAP_REVISION_ID 0x8800 /* 10001 */
|
|
|
|
|
#define PCIM_HTCAP_UNITID_CLUMPING 0x9000 /* 10010 */
|
|
|
|
|
#define PCIM_HTCAP_EXT_CONFIG_SPACE 0x9800 /* 10011 */
|
|
|
|
|
#define PCIM_HTCAP_ADDRESS_MAPPING 0xa000 /* 10100 */
|
|
|
|
|
#define PCIM_HTCAP_MSI_MAPPING 0xa800 /* 10101 */
|
|
|
|
|
#define PCIM_HTCAP_DIRECT_ROUTE 0xb000 /* 10110 */
|
|
|
|
|
#define PCIM_HTCAP_VCSET 0xb800 /* 10111 */
|
|
|
|
|
#define PCIM_HTCAP_RETRY_MODE 0xc000 /* 11000 */
|
2007-04-25 14:45:46 +00:00
|
|
|
#define PCIM_HTCAP_X86_ENCODING 0xc800 /* 11001 */
|
2006-12-12 19:33:25 +00:00
|
|
|
|
|
|
|
|
/* HT MSI Mapping Capability definitions. */
|
|
|
|
|
#define PCIM_HTCMD_MSI_ENABLE 0x0001
|
2007-04-25 14:45:46 +00:00
|
|
|
#define PCIM_HTCMD_MSI_FIXED 0x0002
|
2006-12-12 19:33:25 +00:00
|
|
|
#define PCIR_HTMSI_ADDRESS_LO 0x4
|
|
|
|
|
#define PCIR_HTMSI_ADDRESS_HI 0x8
|
|
|
|
|
|
2007-02-02 19:48:25 +00:00
|
|
|
/* PCI Vendor capability definitions */
|
|
|
|
|
#define PCIR_VENDOR_LENGTH 0x2
|
|
|
|
|
#define PCIR_VENDOR_DATA 0x3
|
|
|
|
|
|
|
|
|
|
/* PCI EHCI Debug Port definitions */
|
|
|
|
|
#define PCIR_DEBUG_PORT 0x2
|
|
|
|
|
#define PCIM_DEBUG_PORT_OFFSET 0x1FFF
|
|
|
|
|
#define PCIM_DEBUG_PORT_BAR 0xe000
|
|
|
|
|
|
2007-01-16 17:04:42 +00:00
|
|
|
/* PCI-PCI Bridge Subvendor definitions */
|
|
|
|
|
#define PCIR_SUBVENDCAP_ID 0x4
|
|
|
|
|
|
2007-02-02 19:48:25 +00:00
|
|
|
/* PCI Express definitions */
|
|
|
|
|
#define PCIR_EXPRESS_FLAGS 0x2
|
|
|
|
|
#define PCIM_EXP_FLAGS_VERSION 0x000F
|
|
|
|
|
#define PCIM_EXP_FLAGS_TYPE 0x00F0
|
|
|
|
|
#define PCIM_EXP_TYPE_ENDPOINT 0x0000
|
|
|
|
|
#define PCIM_EXP_TYPE_LEGACY_ENDPOINT 0x0010
|
|
|
|
|
#define PCIM_EXP_TYPE_ROOT_PORT 0x0040
|
|
|
|
|
#define PCIM_EXP_TYPE_UPSTREAM_PORT 0x0050
|
|
|
|
|
#define PCIM_EXP_TYPE_DOWNSTREAM_PORT 0x0060
|
|
|
|
|
#define PCIM_EXP_TYPE_PCI_BRIDGE 0x0070
|
2009-04-17 19:07:44 +00:00
|
|
|
#define PCIM_EXP_TYPE_PCIE_BRIDGE 0x0080
|
|
|
|
|
#define PCIM_EXP_TYPE_ROOT_INT_EP 0x0090
|
|
|
|
|
#define PCIM_EXP_TYPE_ROOT_EC 0x00a0
|
2007-02-02 19:48:25 +00:00
|
|
|
#define PCIM_EXP_FLAGS_SLOT 0x0100
|
|
|
|
|
#define PCIM_EXP_FLAGS_IRQ 0x3e00
|
2009-04-17 19:07:44 +00:00
|
|
|
#define PCIR_EXPRESS_DEVICE_CAP 0x4
|
|
|
|
|
#define PCIM_EXP_CAP_MAX_PAYLOAD 0x0007
|
|
|
|
|
#define PCIR_EXPRESS_DEVICE_CTL 0x8
|
2010-07-11 20:55:39 +00:00
|
|
|
#define PCIM_EXP_CTL_NFER_ENABLE 0x0002
|
|
|
|
|
#define PCIM_EXP_CTL_FER_ENABLE 0x0004
|
|
|
|
|
#define PCIM_EXP_CTL_URR_ENABLE 0x0008
|
2010-02-01 20:50:49 +00:00
|
|
|
#define PCIM_EXP_CTL_RELAXED_ORD_ENABLE 0x0010
|
2009-04-17 19:07:44 +00:00
|
|
|
#define PCIM_EXP_CTL_MAX_PAYLOAD 0x00e0
|
2010-02-01 20:50:49 +00:00
|
|
|
#define PCIM_EXP_CTL_NOSNOOP_ENABLE 0x0800
|
2009-04-17 19:07:44 +00:00
|
|
|
#define PCIM_EXP_CTL_MAX_READ_REQUEST 0x7000
|
|
|
|
|
#define PCIR_EXPRESS_DEVICE_STA 0xa
|
2010-02-01 20:50:49 +00:00
|
|
|
#define PCIM_EXP_STA_CORRECTABLE_ERROR 0x0001
|
|
|
|
|
#define PCIM_EXP_STA_NON_FATAL_ERROR 0x0002
|
|
|
|
|
#define PCIM_EXP_STA_FATAL_ERROR 0x0004
|
|
|
|
|
#define PCIM_EXP_STA_UNSUPPORTED_REQ 0x0008
|
|
|
|
|
#define PCIM_EXP_STA_AUX_POWER 0x0010
|
|
|
|
|
#define PCIM_EXP_STA_TRANSACTION_PND 0x0020
|
2009-04-17 19:07:44 +00:00
|
|
|
#define PCIR_EXPRESS_LINK_CAP 0xc
|
|
|
|
|
#define PCIM_LINK_CAP_MAX_SPEED 0x0000000f
|
|
|
|
|
#define PCIM_LINK_CAP_MAX_WIDTH 0x000003f0
|
|
|
|
|
#define PCIM_LINK_CAP_ASPM 0x00000c00
|
|
|
|
|
#define PCIM_LINK_CAP_L0S_EXIT 0x00007000
|
|
|
|
|
#define PCIM_LINK_CAP_L1_EXIT 0x00038000
|
|
|
|
|
#define PCIM_LINK_CAP_PORT 0xff000000
|
|
|
|
|
#define PCIR_EXPRESS_LINK_CTL 0x10
|
|
|
|
|
#define PCIR_EXPRESS_LINK_STA 0x12
|
|
|
|
|
#define PCIM_LINK_STA_SPEED 0x000f
|
|
|
|
|
#define PCIM_LINK_STA_WIDTH 0x03f0
|
|
|
|
|
#define PCIM_LINK_STA_TRAINING_ERROR 0x0400
|
|
|
|
|
#define PCIM_LINK_STA_TRAINING 0x0800
|
|
|
|
|
#define PCIM_LINK_STA_SLOT_CLOCK 0x1000
|
|
|
|
|
#define PCIR_EXPRESS_SLOT_CAP 0x14
|
2012-09-05 19:01:39 +00:00
|
|
|
#define PCIM_EXP_SLOT_CAP_APB 0x00000001
|
|
|
|
|
#define PCIM_EXP_SLOT_CAP_PCP 0x00000002
|
|
|
|
|
#define PCIM_EXP_SLOT_CAP_MRLSP 0x00000004
|
|
|
|
|
#define PCIM_EXP_SLOT_CAP_AIP 0x00000008
|
|
|
|
|
#define PCIM_EXP_SLOT_CAP_PIP 0x00000010
|
|
|
|
|
#define PCIM_EXP_SLOT_CAP_HPS 0x00000020
|
|
|
|
|
#define PCIM_EXP_SLOT_CAP_HPC 0x00000040
|
|
|
|
|
#define PCIM_EXP_SLOT_CAP_SPLV 0x00007f80
|
|
|
|
|
#define PCIM_EXP_SLOT_CAP_SPLS 0x00018000
|
|
|
|
|
#define PCIM_EXP_SLOT_CAP_EIP 0x00020000
|
|
|
|
|
#define PCIM_EXP_SLOT_CAP_NCCS 0x00040000
|
|
|
|
|
#define PCIM_EXP_SLOT_CAP_PSN 0xfff80000
|
2009-04-17 19:07:44 +00:00
|
|
|
#define PCIR_EXPRESS_SLOT_CTL 0x18
|
2012-09-05 19:01:39 +00:00
|
|
|
#define PCIM_EXP_SLOT_CTL_ABPE 0x0001
|
|
|
|
|
#define PCIM_EXP_SLOT_CTL_PFDE 0x0002
|
|
|
|
|
#define PCIM_EXP_SLOT_CTL_MRLSCE 0x0004
|
|
|
|
|
#define PCIM_EXP_SLOT_CTL_PDCE 0x0008
|
|
|
|
|
#define PCIM_EXP_SLOT_CTL_CCIE 0x0010
|
|
|
|
|
#define PCIM_EXP_SLOT_CTL_HPIE 0x0020
|
|
|
|
|
#define PCIM_EXP_SLOT_CTL_AIC 0x00c0
|
|
|
|
|
#define PCIM_EXP_SLOT_CTL_PIC 0x0300
|
|
|
|
|
#define PCIM_EXP_SLOT_CTL_PCC 0x0400
|
|
|
|
|
#define PCIM_EXP_SLOT_CTL_EIC 0x0800
|
|
|
|
|
#define PCIM_EXP_SLOT_CTL_DLLSCE 0x1000
|
2009-04-17 19:07:44 +00:00
|
|
|
#define PCIR_EXPRESS_SLOT_STA 0x1a
|
2012-09-05 19:01:39 +00:00
|
|
|
#define PCIM_EXP_SLOT_STA_ABP 0x0001
|
|
|
|
|
#define PCIM_EXP_SLOT_STA_PFD 0x0002
|
|
|
|
|
#define PCIM_EXP_SLOT_STA_MRLSC 0x0004
|
|
|
|
|
#define PCIM_EXP_SLOT_STA_PDC 0x0008
|
|
|
|
|
#define PCIM_EXP_SLOT_STA_CC 0x0010
|
|
|
|
|
#define PCIM_EXP_SLOT_STA_MRLSS 0x0020
|
|
|
|
|
#define PCIM_EXP_SLOT_STA_PDS 0x0040
|
|
|
|
|
#define PCIM_EXP_SLOT_STA_EIS 0x0080
|
|
|
|
|
#define PCIM_EXP_SLOT_STA_DLLSC 0x0100
|
2009-04-17 19:07:44 +00:00
|
|
|
#define PCIR_EXPRESS_ROOT_CTL 0x1c
|
|
|
|
|
#define PCIR_EXPRESS_ROOT_STA 0x20
|
2012-03-08 21:09:34 +00:00
|
|
|
#define PCIR_EXPRESS_DEVICE_CTL2 40
|
|
|
|
|
#define PCIM_EXPRESS_DEVICE_CTL2_ARI 0x20
|
|
|
|
|
#define PCIM_EXPRESS_ID_ORDERED_REQ_EN 0x100
|
|
|
|
|
#define PCIM_EXPRESS_ID_ORDERED_CMP_EN 0x200
|
|
|
|
|
#define PCIM_EXPRESS_LTR_ENABLE 0x400
|
|
|
|
|
#define PCIM_EXPRESS_OBFF_MSGA_ENABLE 0x2000
|
|
|
|
|
#define PCIM_EXPRESS_OBFF_MSGB_ENABLE 0x4000
|
|
|
|
|
#define PCIM_EXPRESS_OBFF_WAKE_ENABLE 0x6000
|
|
|
|
|
#define PCIR_EXPRESS_LINK_CTL2 48
|
|
|
|
|
#define PCIR_EXPRESS_SLOT_CTL2 56
|
2007-02-02 19:48:25 +00:00
|
|
|
|
First cut at MI support for PCI Message Signalled Interrupts (MSI):
- Add 3 new functions to the pci_if interface along with suitable wrappers
to provide the device driver visible API:
- pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI(). '*count'
here is an in and out parameter. The driver stores the desired number
of messages in '*count' before calling the function. On success,
'*count' holds the number of messages allocated to the device. Also on
success, the driver can access the messages as SYS_RES_IRQ resources
starting at rid 1. Note that the legacy INTx interrupt resource will
not be available when using MSI. Note that this function will allocate
either MSI or MSI-X messages depending on the devices capabilities and
the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. Also note
that the driver should activate the memory resource that holds the
MSI-X table and pending bit array (PBA) before calling this function
if the device supports MSI-X.
- pci_release_msi(dev) backed by PCI_RELEASE_MSI(). This function
releases the messages allocated for this device. All of the
SYS_RES_IRQ resources need to be released for this function to succeed.
- pci_msi_count(dev) backed by PCI_MSI_COUNT(). This function returns
the maximum number of MSI or MSI-X messages supported by this device.
MSI-X is preferred if present, but this function will honor the
'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. This function
should return the largest value that pci_alloc_msi() can return
(assuming the MD code is able to allocate sufficient backing resources
for all of the messages).
- Add default implementations for these 3 methods to the pci_driver generic
PCI bus driver. (The various other PCI bus drivers such as for ACPI and
OFW will inherit these default implementations.) This default
implementation depends on 4 new pcib_if methods that bubble up through
the PCI bridges to the MD code to allocate IRQ values and perform any
needed MD setup code needed:
- PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages.
- PCIB_RELEASE_MSI() releases a group of MSI messages.
- PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message.
- PCIB_RELEASE_MSIX() releases a single MSI-X message.
- Add default implementations for these 4 methods that just pass the
request up to the parent bus's parent bridge driver and use the
default implementation in the various MI PCI bridge drivers.
- Add MI functions for use by MD code when managing MSI and MSI-X
interrupts:
- pci_enable_msi(dev, address, data) programs the MSI capability address
and data registers for a group of MSI messages
- pci_enable_msix(dev, index, address, data) initializes a single MSI-X
message in the MSI-X table
- pci_mask_msix(dev, index) masks a single MSI-X message
- pci_unmask_msix(dev, index) unmasks a single MSI-X message
- pci_pending_msix(dev, index) returns true if the specified MSI-X
message is currently pending
- Save the MSI capability address and data registers in the pci_cfgreg
block in a PCI devices ivars and restore the values when a device is
resumed. Note that the MSI-X table is not currently restored during
resume.
- Add constants for MSI-X register offsets and fields.
- Record interesting data about any MSI-X capability blocks we come
across in the pci_cfgreg block in the ivars for PCI devices.
Tested on: em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X)
Reviewed by: scottl, grehan, jfv
MFC after: 2 months
2006-11-13 21:47:30 +00:00
|
|
|
/* MSI-X definitions */
|
|
|
|
|
#define PCIR_MSIX_CTRL 0x2
|
|
|
|
|
#define PCIM_MSIXCTRL_MSIX_ENABLE 0x8000
|
|
|
|
|
#define PCIM_MSIXCTRL_FUNCTION_MASK 0x4000
|
|
|
|
|
#define PCIM_MSIXCTRL_TABLE_SIZE 0x07FF
|
|
|
|
|
#define PCIR_MSIX_TABLE 0x4
|
|
|
|
|
#define PCIR_MSIX_PBA 0x8
|
|
|
|
|
#define PCIM_MSIX_BIR_MASK 0x7
|
|
|
|
|
#define PCIM_MSIX_BIR_BAR_10 0
|
|
|
|
|
#define PCIM_MSIX_BIR_BAR_14 1
|
|
|
|
|
#define PCIM_MSIX_BIR_BAR_18 2
|
|
|
|
|
#define PCIM_MSIX_BIR_BAR_1C 3
|
|
|
|
|
#define PCIM_MSIX_BIR_BAR_20 4
|
|
|
|
|
#define PCIM_MSIX_BIR_BAR_24 5
|
|
|
|
|
#define PCIM_MSIX_VCTRL_MASK 0x1
|
2009-02-15 09:49:21 +00:00
|
|
|
|
|
|
|
|
/* PCI Advanced Features definitions */
|
|
|
|
|
#define PCIR_PCIAF_CAP 0x3
|
|
|
|
|
#define PCIM_PCIAFCAP_TP 0x01
|
|
|
|
|
#define PCIM_PCIAFCAP_FLR 0x02
|
|
|
|
|
#define PCIR_PCIAF_CTRL 0x4
|
|
|
|
|
#define PCIR_PCIAFCTRL_FLR 0x01
|
|
|
|
|
#define PCIR_PCIAF_STATUS 0x5
|
|
|
|
|
#define PCIR_PCIAFSTATUS_TP 0x01
|
2010-09-08 17:53:34 +00:00
|
|
|
|
|
|
|
|
/* Advanced Error Reporting */
|
|
|
|
|
#define PCIR_AER_UC_STATUS 0x04
|
2010-09-09 18:19:15 +00:00
|
|
|
#define PCIM_AER_UC_TRAINING_ERROR 0x00000001
|
|
|
|
|
#define PCIM_AER_UC_DL_PROTOCOL_ERROR 0x00000010
|
2012-01-31 15:48:40 +00:00
|
|
|
#define PCIM_AER_UC_SURPRISE_LINK_DOWN 0x00000020
|
2010-09-09 18:19:15 +00:00
|
|
|
#define PCIM_AER_UC_POISONED_TLP 0x00001000
|
|
|
|
|
#define PCIM_AER_UC_FC_PROTOCOL_ERROR 0x00002000
|
|
|
|
|
#define PCIM_AER_UC_COMPLETION_TIMEOUT 0x00004000
|
|
|
|
|
#define PCIM_AER_UC_COMPLETER_ABORT 0x00008000
|
|
|
|
|
#define PCIM_AER_UC_UNEXPECTED_COMPLETION 0x00010000
|
|
|
|
|
#define PCIM_AER_UC_RECEIVER_OVERFLOW 0x00020000
|
|
|
|
|
#define PCIM_AER_UC_MALFORMED_TLP 0x00040000
|
|
|
|
|
#define PCIM_AER_UC_ECRC_ERROR 0x00080000
|
|
|
|
|
#define PCIM_AER_UC_UNSUPPORTED_REQUEST 0x00100000
|
|
|
|
|
#define PCIM_AER_UC_ACS_VIOLATION 0x00200000
|
2010-09-08 17:53:34 +00:00
|
|
|
#define PCIR_AER_UC_MASK 0x08 /* Shares bits with UC_STATUS */
|
|
|
|
|
#define PCIR_AER_UC_SEVERITY 0x0c /* Shares bits with UC_STATUS */
|
|
|
|
|
#define PCIR_AER_COR_STATUS 0x10
|
|
|
|
|
#define PCIM_AER_COR_RECEIVER_ERROR 0x00000001
|
|
|
|
|
#define PCIM_AER_COR_BAD_TLP 0x00000040
|
|
|
|
|
#define PCIM_AER_COR_BAD_DLLP 0x00000080
|
|
|
|
|
#define PCIM_AER_COR_REPLAY_ROLLOVER 0x00000100
|
|
|
|
|
#define PCIM_AER_COR_REPLAY_TIMEOUT 0x00001000
|
2011-11-30 18:33:23 +00:00
|
|
|
#define PCIM_AER_COR_ADVISORY_NF_ERROR 0x00002000
|
2010-09-08 17:53:34 +00:00
|
|
|
#define PCIR_AER_COR_MASK 0x14 /* Shares bits with COR_STATUS */
|
|
|
|
|
#define PCIR_AER_CAP_CONTROL 0x18
|
|
|
|
|
#define PCIM_AER_FIRST_ERROR_PTR 0x0000001f
|
|
|
|
|
#define PCIM_AER_ECRC_GEN_CAPABLE 0x00000020
|
|
|
|
|
#define PCIM_AER_ECRC_GEN_ENABLE 0x00000040
|
|
|
|
|
#define PCIM_AER_ECRC_CHECK_CAPABLE 0x00000080
|
|
|
|
|
#define PCIM_AER_ECRC_CHECK_ENABLE 0x00000100
|
|
|
|
|
#define PCIR_AER_HEADER_LOG 0x1c
|
|
|
|
|
#define PCIR_AER_ROOTERR_CMD 0x2c /* Only for root complex ports */
|
2010-09-09 18:19:15 +00:00
|
|
|
#define PCIM_AER_ROOTERR_COR_ENABLE 0x00000001
|
|
|
|
|
#define PCIM_AER_ROOTERR_NF_ENABLE 0x00000002
|
|
|
|
|
#define PCIM_AER_ROOTERR_F_ENABLE 0x00000004
|
2010-09-08 17:53:34 +00:00
|
|
|
#define PCIR_AER_ROOTERR_STATUS 0x30 /* Only for root complex ports */
|
2010-09-09 18:19:15 +00:00
|
|
|
#define PCIM_AER_ROOTERR_COR_ERR 0x00000001
|
|
|
|
|
#define PCIM_AER_ROOTERR_MULTI_COR_ERR 0x00000002
|
|
|
|
|
#define PCIM_AER_ROOTERR_UC_ERR 0x00000004
|
|
|
|
|
#define PCIM_AER_ROOTERR_MULTI_UC_ERR 0x00000008
|
|
|
|
|
#define PCIM_AER_ROOTERR_FIRST_UC_FATAL 0x00000010
|
|
|
|
|
#define PCIM_AER_ROOTERR_NF_ERR 0x00000020
|
|
|
|
|
#define PCIM_AER_ROOTERR_F_ERR 0x00000040
|
|
|
|
|
#define PCIM_AER_ROOTERR_INT_MESSAGE 0xf8000000
|
2010-09-08 17:53:34 +00:00
|
|
|
#define PCIR_AER_COR_SOURCE_ID 0x34 /* Only for root complex ports */
|
|
|
|
|
#define PCIR_AER_ERR_SOURCE_ID 0x36 /* Only for root complex ports */
|
|
|
|
|
|
|
|
|
|
/* Virtual Channel definitions */
|
|
|
|
|
#define PCIR_VC_CAP1 0x04
|
|
|
|
|
#define PCIM_VC_CAP1_EXT_COUNT 0x00000007
|
|
|
|
|
#define PCIM_VC_CAP1_LOWPRI_EXT_COUNT 0x00000070
|
|
|
|
|
#define PCIR_VC_CAP2 0x08
|
|
|
|
|
#define PCIR_VC_CONTROL 0x0C
|
|
|
|
|
#define PCIR_VC_STATUS 0x0E
|
|
|
|
|
#define PCIR_VC_RESOURCE_CAP(n) (0x10 + (n) * 0x0C)
|
|
|
|
|
#define PCIR_VC_RESOURCE_CTL(n) (0x14 + (n) * 0x0C)
|
|
|
|
|
#define PCIR_VC_RESOURCE_STA(n) (0x18 + (n) * 0x0C)
|
|
|
|
|
|
|
|
|
|
/* Serial Number definitions */
|
|
|
|
|
#define PCIR_SERIAL_LOW 0x04
|
|
|
|
|
#define PCIR_SERIAL_HIGH 0x08
|
