d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
70134d768c
freebsd-skq/sys/dev/usb/usbdevs

1550 lines
52 KiB
Plaintext
Raw Normal View History

I added unwanted character. I cleaned
2004-01-12 12:47:36 +00:00
$FreeBSD$
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
/* $NetBSD: usbdevs,v 1.392 2004/12/29 08:38:44 imp Exp $ */
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Start each of the license/copyright comments with /*-, minor shuffle of lines
2005-01-06 01:43:34 +00:00
/*-
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
* Copyright (c) 1998-2004 The NetBSD Foundation, Inc.
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
Sync with NetBSD
2000-05-07 19:44:16 +00:00
* by Lennart Augustsson (lennart@augustsson.net) at
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* List of known USB vendors
Add a comment about the fact that adding an ID doesn't actually do anything.
2001-02-06 14:59:03 +00:00
*
Add the Winbond made Hawking UH104 4-port hub. Add a note where to find the offical USB assigned numbers.
2004-12-29 02:09:19 +00:00
* USB.org publishes a VID list of USB-IF member companies at
* http://www.usb.org/developers/tools
* Note that it does not show companies that have obtained a Vendor ID
* without becoming full members.
*
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
* Please note that these IDs do not do anything. Adding an ID here and
* regenerating the usbdevs.h and usbdevs_data.h only makes a symbolic name
* available to the source code and does not change any functionality, nor
* does it make your device available to a specific driver.
* It will however make the descriptive string available if a device does not
* provide the string itself.
Add a comment about the fact that adding an ID doesn't actually do anything.
2001-02-06 14:59:03 +00:00
*
* After adding a vendor ID VNDR and a product ID PRDCT you will have the
* following extra defines:
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
* #define USB_VENDOR_VNDR 0x????
* #define USB_PRODUCT_VNDR_PRDCT 0x????
Add a comment about the fact that adding an ID doesn't actually do anything.
2001-02-06 14:59:03 +00:00
*
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
* You may have to add these defines to the respective probe routines to
* make the device recognised by the appropriate device driver.
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
*/
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor EGALAX2 0x0123 eGalax
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
vendor LTS 0x0386 LTS
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor AOX 0x03e8 AOX
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor THESYS 0x03e9 Thesys
vendor DATABROADCAST 0x03ea Data Broadcasting
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ATMEL 0x03eb Atmel
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor IWATSU 0x03ec Iwatsu America
vendor MITEL 0x03ee Mitel
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
vendor MITSUMI 0x03ee Mitsumi
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor HP 0x03f0 Hewlett Packard
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor GENOA 0x03f1 Genoa
vendor OAK 0x03f2 Oak
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ADAPTEC 0x03f3 Adaptec
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor DIEBOLD 0x03f4 Diebold
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
vendor SIEMENSELECTRO 0x03f5 Siemens Electromechanical
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor EPSONIMAGING 0x03f8 Epson Imaging
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor KEYTRONIC 0x03f9 KeyTronic
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor OPTI 0x03fb OPTi
vendor ELITEGROUP 0x03fc Elitegroup
vendor XILINX 0x03fd Xilinx
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
vendor FARALLON 0x03fe Farallon Communications
Sync with NetBSD
2000-10-25 10:13:47 +00:00
vendor NATIONAL 0x0400 National Semiconductor
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor NATIONALREG 0x0401 National Registry
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ACERLABS 0x0402 Acer Labs
Sync with NetBSD
2000-05-07 19:44:16 +00:00
vendor FTDI 0x0403 Future Technology Devices
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor NCR 0x0404 NCR
vendor SYNOPSYS2 0x0405 Synopsys
vendor FUJITSUICL 0x0406 Fujitsu-ICL
vendor FUJITSU2 0x0407 Fujitsu Personal Systems
vendor QUANTA 0x0408 Quanta
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor NEC 0x0409 NEC
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor KODAK 0x040a Eastman Kodak
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor WELTREND 0x040b Weltrend
vendor VIA 0x040d VIA
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor MCCI 0x040e MCCI
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor MELCO 0x0411 Melco
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor WINBOND 0x0416 Winbond
vendor PHOENIX 0x041a Phoenix
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
vendor CREATIVE 0x041e Creative
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor NOKIA 0x0421 Nokia
vendor ADI 0x0422 ADI
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor CATC 0x0423 Computer Access Technology
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor SMC2 0x0424 SMC
vendor MOTOROLA_HK 0x0425 Motorola HK
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
vendor GRAVIS 0x0428 Advanced Gravis Computer Tech.
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor CIRRUSLOGIC 0x0429 Cirrus Logic
vendor INNOVATIVE 0x042c Innovative Semiconductors
vendor MOLEX 0x042f Molex
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
vendor SUN2 0x0430 Sun Microsystems (unofficial)
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor UNISYS 0x0432 Unisys
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
vendor TAUGA 0x0436 Taugagreining HF
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor AMD 0x0438 ADM
vendor LEXMARK 0x043d Lexmark
vendor LG 0x043e LG Electronics
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor NANAO 0x0440 NANAO
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor GATEWAY 0x0443 Gateway 2000
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor NMB 0x0446 NMB
vendor ALPS 0x044e Alps
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor THRUST 0x044f Thrustmaster
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
vendor TI 0x0451 Texas Instruments
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ANALOGDEVICES 0x0456 Analog Devices
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor SIS 0x0457 SIS
vendor KYE 0x0458 KYE
Add vendor ID for Kingston Technology and add device ID for KNU101TX USB ethernet adapter. (Yes, another one.)
2000-10-10 23:23:54 +00:00
vendor DIAMOND2 0x045a Diamond (Supra)
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor RENESAS 0x045b Renesas
Some new ids, from NetBSD
2000-08-06 23:22:13 +00:00
vendor MICROSOFT 0x045e Microsoft
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor PRIMAX 0x0461 Primax
vendor MGE 0x0463 MGE
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor AMP 0x0464 AMP
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor CHERRY 0x046a Cherry
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor MEGATRENDS 0x046b American Megatrends
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor LOGITECH 0x046d Logitech
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor BTC 0x046e BTC
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor PHILIPS 0x0471 Philips
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor SUN 0x0472 Sun Microsystems (offical)
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor SANYO 0x0474 Sanyo
vendor SEAGATE 0x0477 Seagate
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor CONNECTIX 0x0478 Connectix
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor SEMTECH 0x047a Semtech
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
vendor KENSINGTON 0x047d Kensington
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor LUCENT 0x047e Lucent
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
vendor PLANTRONICS 0x047f Plantronics
vendor KYOCERA 0x0482 Kyocera
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor STMICRO 0x0483 STMicroelectronics
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor FOXCONN 0x0489 Foxconn
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor YAMAHA 0x0499 YAMAHA
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
vendor COMPAQ 0x049f Compaq
vendor HITACHI 0x04a4 Hitachi
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ACERP 0x04a5 Acer Peripherals
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
vendor VISIONEER 0x04a7 Visioneer
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor CANON 0x04a9 Canon
Nikon E990 and Nomad MP3 player Ids. Submitted by: pete@altadena.net
2001-01-18 00:15:49 +00:00
vendor NIKON 0x04b0 Nikon
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor PAN 0x04b1 Pan International
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
vendor IBM 0x04b3 IBM
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor CYPRESS 0x04b4 Cypress
vendor ROHM 0x04b5 ROHM
vendor COMPAL 0x04b7 Compal
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor EPSON 0x04b8 Seiko Epson
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor RAINBOW 0x04b9 Rainbow
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
vendor IODATA 0x04bb I-O Data
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor TDK 0x04bf TDK
Add device driver support for USB ethernet adapters based on the Kawasaki LSI KL5KUSB101B chip, including the LinkSys USB10T, the Entrega NET-USB-E45, the Peracom USB Ethernet Adapter, the 3Com 3c19250 and the ADS Technologies USB-10BT. This device is 10mbs half-duplex only, so there's miibus or ifmedia support. This device also requires firmware to be loaded into it, however KLSI allows redistribution of the firmware images (I specifically asked about this; they said it was ok). Special thanks to Annelise Anderson for getting me in touch with KLSI (eventually) and thanks to KLSI for providing the necessary programming info. Highlights: - Add driver files to /sys/dev/usb - update usbdevs and regenerate attendate files - update usb_quirks.c - Update HARDWARE.TXT and RELNOTES.TXT for i386 and alpha - Update LINT, GENERIC and others for i386, alpha and pc98 - Add man page - Add module - Update sysinstall and userconfig.c
2000-01-05 04:27:24 +00:00
vendor 3COMUSR 0x04c1 U.S. Robotics
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor METHODE 0x04c2 Methode
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor MAXISWITCH 0x04c3 Maxi Switch
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
vendor LOCKHEEDMER 0x04c4 Lockheed Martin Energy Research
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor FUJITSU 0x04c5 Fujitsu
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor TOSHIBAAM 0x04c6 Toshiba
vendor MICROMACRO 0x04c7 Micro Macro
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor KONICA 0x04c8 Konica
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor LITEON 0x04ca Lite-On
vendor FUJIPHOTO 0x04cb Fuji Photo
vendor PHILIPSSEMI 0x04cc Philips
vendor TATUNG 0x04cd Tatung
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor SCANLOGIC 0x04ce ScanLogic
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor MYSON 0x04cf Myson
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
vendor DIGI2 0x04d0 Digi
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
vendor ITTCANON 0x04d1 ITT Canon
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
vendor ALTEC 0x04d2 Altec Lansing
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor LSI 0x04d4 LSI
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor MENTORGRAPHICS 0x04d6 Mentor Graphics
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor HOLTEK 0x04d9 Holtek
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
vendor PANASONIC 0x04da Panasonic (Matsushita)
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor HUANHSIN 0x04dc Huan Hsin
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor SHARP 0x04dd Sharp
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor IIYAMA 0x04e1 Iiyama
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor SHUTTLE 0x04e6 Shuttle
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor ELO 0x04e7 Elo TouchSystems
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor SAMSUNG 0x04e8 Samsung
vendor NORTHSTAR 0x04eb Northstar
vendor TOKYOELECTRON 0x04ec Tokyo Electron
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor ANNABOOKS 0x04ed Annabooks
Added a few more entries. Submitted by: Lars Eggert <larse@ISI.EDU>
2003-07-11 21:17:29 +00:00
vendor JVC 0x04f1 JVC
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor CHICONY 0x04f2 Chicony
vendor ELAN 0x04f3 Elan
vendor NEWNEX 0x04f7 Newnex
vendor BROTHER 0x04f9 Brother
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor DALLAS 0x04fa Dallas Semiconductor
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor SUNPLUS 0x04fc Sunplus
vendor PFU 0x04fe PFU
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor FUJIKURA 0x0501 Fujikura/DDK
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ACER 0x0502 Acer
vendor 3COM 0x0506 3Com
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor HOSIDEN 0x0507 Hosiden
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor AZTECH 0x0509 Aztech
vendor BELKIN 0x050d Belkin
vendor KAWATSU 0x050f Kawatsu
vendor FCI 0x0514 FCI
vendor LONGWELL 0x0516 Longwell
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
vendor COMPOSITE 0x0518 Composite
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor STAR 0x0519 Star Micronics
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor APC 0x051d American Power Conversion
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor SCIATLANTA 0x051e Scientific Atlanta
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor TSM 0x0520 TSM
vendor CONNECTEK 0x0522 Connectek
vendor NETCHIP 0x0525 NetChip
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor ALTRA 0x0527 ALTRA
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ATI 0x0528 ATI
vendor AKS 0x0529 AKS
vendor TEKOM 0x052b Tekom
vendor CANONDEV 0x052c Canon
vendor WACOMTECH 0x0531 Wacom
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor INVENTEC 0x0537 Inventec
vendor SHYHSHIUN 0x0539 Shyh Shiun Terminals
vendor PREHWERKE 0x053a Preh Werke Gmbh & Co. KG
vendor SYNOPSYS 0x053f Synopsys
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor UNIACCESS 0x0540 Universal Access
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor VIEWSONIC 0x0543 ViewSonic
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
vendor XIRLINK 0x0545 Xirlink
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ANCHOR 0x0547 Anchor
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor SONY 0x054c Sony
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor FUJIXEROX 0x0550 Fuji Xerox
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
vendor VISION 0x0553 VLSI Vision
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ASAHIKASEI 0x0556 Asahi Kasei
vendor ATEN 0x0557 ATEN
vendor MUSTEK 0x055f Mustek
vendor TELEX 0x0562 Telex
vendor CHINON 0x0564 Chinon
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor PERACOM 0x0565 Peracom Networks
vendor ALCOR2 0x0566 Alcor Micro
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor XYRATEX 0x0567 Xyratex
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor WACOM 0x056a WACOM
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ETEK 0x056c e-TEK
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor EIZO 0x056d EIZO
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ELECOM 0x056e Elecom
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor CONEXANT 0x0572 Conexant
vendor HAUPPAUGE 0x0573 Hauppauge
vendor BAFO 0x0576 BAFO
Add Y-E Data floppy drive.
2000-03-15 21:53:09 +00:00
vendor YEDATA 0x057b Y-E Data
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
vendor AVM 0x057c AVM
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
vendor QUICKSHOT 0x057f Quickshot
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ROLAND 0x0582 Roland
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor ROCKFIRE 0x0583 Rockfire
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor RATOC 0x0584 RATOC
vendor ZYXEL 0x0586 ZyXEL
vendor INFINEON 0x058b Infineon
vendor MICREL 0x058d Micrel
vendor ALCOR 0x058f Alcor
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor OMRON 0x0590 OMRON
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor NIIGATA 0x0598 Niigata
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor IOMEGA 0x059b Iomega
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ATREND 0x059c A-Trend
vendor AID 0x059d AID
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
vendor LACIE 0x059f LaCie
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor FUJIFILM 0x05a2 Fuji Film
vendor ARC 0x05a3 ARC
vendor ORTEK 0x05a4 Ortek
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor BOSE 0x05a7 Bose
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
vendor OMNIVISION 0x05a9 OmniVision
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor INSYSTEM 0x05ab In-System
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor APPLE 0x05ac Apple Computer
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor YCCABLE 0x05ad Y.C. Cable
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor DIGITALPERSONA 0x05ba DigitalPersona
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor RAFI 0x05bd RAFI
vendor TYCO 0x05be Tyco
vendor KAWASAKI 0x05c1 Kawasaki
vendor DIGI 0x05c5 Digi
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor QUALCOMM 0x05c6 Qualcomm
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor QTRONIX 0x05c7 Qtronix
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor FOXLINK 0x05c8 Foxlink
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor RICOH 0x05ca Ricoh
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ELSA 0x05cc ELSA
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor SCIWORX 0x05ce sci-worx
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor BRAINBOXES 0x05d1 Brainboxes
Add Mustek, National and Ultima scanners. Submitted by: Henning Meier-Geinitz <hmg@gmx.de> PR: 29777 MFC after: 1 week
2001-08-21 21:35:40 +00:00
vendor ULTIMA 0x05d8 Ultima
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor AXIOHM 0x05d9 Axiohm
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
vendor MICROTEK 0x05da Microtek
Add a USB comm driver. Ported from NetBSD by: akiyama
2002-03-18 18:23:42 +00:00
vendor SUNTAC 0x05db SUN Corporation
Lexar jumpSHOT Id. Submitted by: gshapiro
2001-04-17 15:34:22 +00:00
vendor LEXAR 0x05dc Lexar Media
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor DELTA 0x05dd Delta
vendor SYMBOL 0x05e0 Symbol
vendor SYNTEK 0x05e1 Syntek
vendor GENESYS 0x05e3 Genesys
vendor FUJI 0x05e5 Fuji
vendor KEITHLEY 0x05e6 Keithley
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor EIZONANAO 0x05e7 EIZO Nanao
Correct the vendor ID for KLSI: it's actually 0x5e9. 0x3e8 is the vendor ID for Aox Inc, which makes the controller engine and/or firmware for the KLSI chip.
2000-01-05 18:25:53 +00:00
vendor KLSI 0x05e9 Kawasaki LSI
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor FFC 0x05eb FFC
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ANKO 0x05ef Anko
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
vendor PIENGINEERING 0x05f3 P.I. Engineering
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor AOC 0x05f6 AOC
vendor CHIC 0x05fe Chic
vendor BARCO 0x0600 Barco
vendor BRIDGE 0x0607 Bridge
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
vendor SOLIDYEAR 0x060b Solid Year
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor BIORAD 0x0614 Bio-Rad
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor MACALLY 0x0618 Macally
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ACTLABS 0x061c Act Labs
vendor ALARIS 0x0620 Alaris
vendor APEX 0x0624 Apex
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
vendor VIVITAR 0x0636 Vivitar
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor AVISION 0x0638 Avision
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
vendor TEAC 0x0644 TEAC
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
vendor SGI 0x065e Silicon Graphics
vendor SANWASUPPLY 0x0663 Sanwa Supply
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor LINKSYS 0x066b Linksys
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ACERSA 0x066e Acer
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor SIGMATEL 0x066f Sigmatel
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor AIWA 0x0677 Aiwa
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ACARD 0x0678 ACARD
vendor PROLIFIC 0x067b Prolific
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
vendor SIEMENS 0x067c Siemens
More minor diff reduction against netbsd: ADVANCELOGIC->AVANCELOGIC (nothing in the tree uses it, so safe to do) sort HAGIWARA vendor entry sort ACTIONTAR vendor entry Minor change to SYSTEMTALKS vendor entry.
2004-12-26 07:48:46 +00:00
vendor AVANCELOGIC 0x0680 Avance Logic
Add a new vendor: MINOLTA, and some products by them. Partially submitted by: asmodai
2002-04-06 12:27:23 +00:00
vendor MINOLTA 0x0686 Minolta
More minor diff reduction against netbsd: ADVANCELOGIC->AVANCELOGIC (nothing in the tree uses it, so safe to do) sort HAGIWARA vendor entry sort ACTIONTAR vendor entry Minor change to SYSTEMTALKS vendor entry.
2004-12-26 07:48:46 +00:00
vendor CHPRODUCTS 0x068e CH Products
vendor HAGIWARA 0x0693 Hagiwara Sys-Com
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
vendor CTX 0x0698 Chuntex
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ASKEY 0x069a Askey
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor SAITEK 0x06a3 Saitek
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ALCATELT 0x06b9 Alcatel
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor AGFA 0x06bd AGFA-Gevaert
vendor ASIAMD 0x06be Asia Microelectronic Development
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor BIZLINK 0x06c4 Bizlink
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
vendor KEYSPAN 0x06cd Keyspan
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor AASHIMA 0x06d6 Aashima
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor MULTITECH 0x06e0 MultiTech
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ADS 0x06e1 ADS
vendor ALCATELM 0x06e4 Alcatel
vendor SIRIUS 0x06ea Sirius
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
vendor GUILLEMOT 0x06f8 Guillemot
Add 22 vendor IDs.
2000-03-20 19:49:20 +00:00
vendor BOSTON 0x06fd Boston Acoustics
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor SMC 0x0707 SCM
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor PUTERCOM 0x0708 Putercom
vendor MCT 0x0711 MCT
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
vendor IMATION 0x0718 Imation
Add support to Sony Ericsson USB Cable(Susteen USB Data Cable) PR: kern/66416 Submitted by: Fredrik Lindberg <fliREMOVEME@shapeshifter.se> MFC after: 1 week
2004-08-08 05:21:56 +00:00
vendor SONYERICSSON 0x0731 Sony Ericsson
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
vendor EICON 0x0734 Eicon Networks
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor DIGITALSTREAM 0x074e Digital Stream
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor AUREAL 0x0755 Aureal
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor MIDIMAN 0x0763 Midiman
WARNING: white space diff This code reduces the number of trailing white space to be more in line w/ NetBSD. I don't regenerate usbdevs, saving that for when it really changes.
2003-07-04 01:50:39 +00:00
vendor LINKSYS2 0x077b Linksys
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor GRIFFIN 0x077d Griffin
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
vendor SANDISK 0x0781 SanDisk
Remove duplicate CHPRODUCTS entry. Use tab religiously in the vendor section.
2004-12-27 06:58:05 +00:00
vendor JENOPTIK 0x0784 Jenoptik
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
vendor LOGITEC 0x0789 Logitec
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor BRIMAX 0x078e Brimax
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor AXIS 0x0792 Axis
vendor ABL 0x0794 ABL
vendor SUNCOMM 0x079c Sun Communications
vendor ALFADATA 0x079d Alfadata
vendor NATIONALTECH 0x07a2 National Technical
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ONNTO 0x07a3 Onnto
vendor BE 0x07a4 Be
vendor ADMTEK 0x07a6 ADMtek
Bunch of updates: - Add vendor/device ID for Corega USB-T ethernet adapter to necessary places so that it will work with the kue driver. - Add vendor/device ID for CATC Netmate devices for driver to be added soon. - Get really crazy about netisr stuff: avoid doing any mbuf allocations or deallocations at splbio/splusb. - Fix if_aue driver so that it works with LinkSys USB100TX: you need to flip the GPIO bits just the right way to put the PHY in the right mode.
2000-01-13 20:13:58 +00:00
vendor COREGA 0x07aa Corega
Add Freecom + product; Update NetBSD's copyright
2000-04-03 14:47:43 +00:00
vendor FREECOM 0x07ab Freecom
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
vendor MICROTECH 0x07af Microtech
Added some new devices and made slight changes to some existing ones. Submitted by: Andre Guibert de Bruet <andy@siliconlandmark.com>
2003-06-25 22:50:57 +00:00
vendor GENERALINSTMNTS 0x07b2 General Instruments (Motorola)
Add Olympus C-700
2001-10-23 22:44:03 +00:00
vendor OLYMPUS 0x07b4 Olympus
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ABOCOM 0x07b8 AboCom
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor KEISOKUGIKEN 0x07c1 Keisokugiken
Minor merges from NetBSD (up through 1.388): Add $NetBSD$ in a comment at the top Update copyright dates Update header comment Add some of the entries not present in FreeBSD's usbdevs file Harmonize some descriptions with NetBSD where NetBSD's were shorter More work needs to happen here, as there's many conflicting vendor names. There's also more harmonization that can happen before that problem is tackled. This was inspired by recent discussions, but none of the patches posted were consulted to produce this commit. Other, similar ones will follow.
2004-12-26 07:14:55 +00:00
vendor ONSPEC 0x07c4 OnSpec
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor APG 0x07c5 APG
vendor BUG 0x07c8 BUG
vendor ALLIEDTELESYN 0x07c9 Allied Telesyn
vendor AVERMEDIA 0x07ca AVerMedia
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor SIIG 0x07cc SIIG
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
vendor CASIO 0x07cf CASIO
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor APTIO 0x07d2 Aptio
vendor ARASAN 0x07da Arasan
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ALLIEDCABLE 0x07e6 Allied Cable
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
vendor STSN 0x07ef STSN
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ZOOM 0x0803 Zoom
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor BROADLOGIC 0x0827 BroadLogic
vendor HANDSPRING 0x082d Handspring
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor PALM 0x0830 Palm
Add vendor IDs, and device IDs supported by uplcom(4). - SOURCENEXT Corp. KeikaiDenwa 8 [1] - SOUECENEXT Corp. KeikaiDenwa 8 with charger [2] - HAL Corp. Crossam2+USB [3] Submitted by: [1] Ryo ONODERA <ryo3327@netscape.net> [2] Masaki Mizutani <m-saki@rr.iij4u.or.jp> [3] FUJISHIMA Satsuki <sf@FreeBSD.org> MFC after: 1 week
2003-11-16 12:05:11 +00:00
vendor SOURCENEXT 0x0833 SOURCENEXT
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ACTIONSTAR 0x0835 Action Star
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
vendor SAMSUNG_TECHWIN 0x0839 Samsung Techwin
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ACCTON 0x083a Accton
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
vendor DIAMOND 0x0841 Diamond
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor NETGEAR 0x0846 BayNETGEAR
vendor ACTIVEWIRE 0x0854 ActiveWire
Add support for the B&B Electronics USB->RS422/485 adapter. PR: kern/73178 Submitted by: Scott Price <prices@dflytech.com>
2004-10-30 09:21:44 +00:00
vendor BBELECTRONICS 0x0856 B&B Electronics
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor PORTGEAR 0x085a PortGear
More minor diff reduction against netbsd: ADVANCELOGIC->AVANCELOGIC (nothing in the tree uses it, so safe to do) sort HAGIWARA vendor entry sort ACTIONTAR vendor entry Minor change to SYSTEMTALKS vendor entry.
2004-12-26 07:48:46 +00:00
vendor SYSTEMTALKS 0x086e System Talks
Sync with NetBSD
2000-10-25 10:13:47 +00:00
vendor METRICOM 0x0870 Metricom
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ADESSOKBTEK 0x087c ADESSO
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor JATON 0x087d Jaton
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor APT 0x0880 APT
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor BOCARESEARCH 0x0885 Boca Research
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ANDREA 0x08a8 Andrea
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor BURRBROWN 0x08bb Burr-Brown Japan
vendor 2WIRE 0x08c8 2Wire
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor AIPTEK 0x08ca AIPTEK
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor SMARTBRIDGES 0x08d1 SmartBridges
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor BILLIONTON 0x08dd Billionton
vendor EXTENDED 0x08e9 Extended
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
vendor MSYSTEMS 0x08ec M-Systems
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor AUTHENTEC 0x08ff AuthenTec
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor AUDIOTECHNICA 0x0909 Audio-Technica
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor TRUMPION 0x090a Trumpion
vendor ALATION 0x0910 Alation
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor CONCORDCAMERA 0x0919 Concord Camera
Add entries for: Belkin F5U103 Belkin F5U120-PC Hub GoHubs GoCOM232 Peracom single port USB-to-serial adapters. Reviewed by: n_hibma Approved by: obrien
2002-10-08 03:00:37 +00:00
vendor GOHUBS 0x0921 GoHubs
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor BIOMETRIC 0x0929 American Biometric
vendor TOSHIBA 0x0930 Toshiba
vendor PLEXTOR 0x093b Plextor
vendor INTREPIDCS 0x093c Intrepid
Additional Ids
2000-10-05 23:09:48 +00:00
vendor YANO 0x094f Yano
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor KINGSTON 0x0951 Kingston
vendor BLUEWATER 0x0956 BlueWater
vendor AGILENT 0x0957 Agilent
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor PORTSMITH 0x095a Portsmith
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor ACERW 0x0967 Acer
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor ADIRONDACK 0x0976 Adirondack Wire & Cable
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor BECKHOFF 0x0978 Beckhoff
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor MINDSATWORK 0x097a Minds At Work
vendor POINTCHIPS 0x09a6 PointChips
Add the Intersil Prism2/Atmel device. These particular devices are strange beasts which are reported to exist in both Atmel and Prism2 flavours. In particular, Itronix branded laptops have the Atmel part with an Intersil radio. Obtained from: NetBSD
2003-10-10 21:01:00 +00:00
vendor INTERSIL 0x09aa Intersil
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ALTIUS 0x09b3 Altius Solutions
vendor ARRIS 0x09c1 Arris Interactive
vendor ACTIVCARD 0x09c3 ACTIVCARD
vendor ACTISYS 0x09c4 ACTiSYS
vendor AFOURTECH 0x09da A-FOUR TECH
vendor AIMEX 0x09dc AIMEX
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ADDONICS 0x09df Addonics
vendor AKAI 0x09e8 AKAI
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor ARESCOM 0x09f5 ARESCOM
Add 22 vendor IDs.
2000-03-20 19:49:20 +00:00
vendor BAY 0x09f9 Bay Associates
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor ALTERA 0x09fb Altera
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor CSR 0x0a12 Cambridge Silicon Radio
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor TREK 0x0a16 Trek
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ASAHIOPTICAL 0x0a17 Asahi Optical
vendor BOCASYSTEMS 0x0a43 Boca Systems
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor MEDIAGEAR 0x0a48 MediaGear
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor BROADCOM 0x0a5c Broadcom
vendor GREENHOUSE 0x0a6b GREENHOUSE
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor GEOCAST 0x0a79 Geocast
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
vendor NEODIO 0x0aec Neodio
Add support for the Vodafone Mobile Connect 3G datacard.
2004-10-16 21:27:28 +00:00
vendor VODAFONE 0x0af0 Vodafone
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor TODOS 0x0b0c Todos Data System
Add device ID for atuwi USB wlan driver, Linksys WUSB11 v2.8 wireless adapter. (Atmel at76c503a http://vitsch.net/bsd/atuwi) PR: kern/68465 Submitted by: Suihong Liang <s2liang@uwaterloo.ca>
2004-07-04 09:13:53 +00:00
vendor SIIG2 0x0b39 SIIG
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor TEKRAM 0x0b3b Tekram
vendor HAL 0x0b41 HAL
vendor EMS 0x0b43 EMS
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor NEC2 0x0b62 NEC
vendor ATI2 0x0b6f ATI
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ZEEVO 0x0b7a Zeevo
vendor KURUSUGAWA 0x0b7e Kurusugawa
vendor ASIX 0x0b95 ASIX
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor USR 0x0baf U.S. Robotics
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
vendor REALTEK 0x0bda RealTek
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ADDONICS2 0x0bf6 Addonics
vendor AGATE 0x0c08 Agate
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor DMI 0x0c0b DMI
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor CHICONY2 0x0c45 Chicony
vendor SEALEVEL 0x0c52 Sealevel
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
vendor LUWEN 0x0c76 Luwen
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor ZCOM 0x0cde Z-Com
vendor TANGTOP 0x0d3d Tangtop
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor SMC3 0x0d5c SMC
Add Support - PNY Attache Flash Drive [1] - minolta 5400 USB scanner [2] PR: kern/58045 [1] kern/56496 [2] Submitted by: [1] Rick C. Petty <rick@kiwi-computer.com> [2] Mark Diekhans <markd@kermodei.com>
2003-12-18 05:47:11 +00:00
vendor PNY 0x0d7d PNY
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ACDC 0x0d7e ACDC
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor ABC 0x0d8c ABC
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
vendor MSI 0x0db0 Micro Star International
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor HAWKING 0x0e66 Hawking
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor OTI 0x0ea0 Ours
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor PILOTECH 0x0eaf Pilotech
vendor EGALAX 0x0eef eGalax
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor MICROTUNE 0x0f4d Microtune
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
vendor QUALCOMM2 0x1004 Qualcomm
Add support Western Digital External USB HDD ONSPEC entry are sorted PR: kern/71031 Submitted by: Johann Hugo <jhugo@icomtek.csir.co.za> MFC after: 1 week
2004-09-04 07:07:35 +00:00
vendor WESTERN 0x1058 Western Digital
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor MOTOROLA 0x1063 Motorola
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor CCYU 0x1065 CCYU
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor PLX 0x10b5 PLX
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor ASANTE 0x10bd Asante
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor JRC 0x1145 JRC
vendor DELORME 0x1163 DeLorme
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor SERVERWORKS 0x1166 ServerWorks
vendor ACERCM 0x1189 Acer Communications & Multimedia
Add support for the TwinMOS Memory Disk IV. PR: kern/73766 Submitted by: Valentin Nechayev MFC after: 1 week
2004-11-28 21:49:30 +00:00
vendor TWINMOS 0x126f TwinMOS
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor TSUNAMI 0x1241 Tsunami
vendor CREATIVE2 0x1292 Creative Labs
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor BELKIN2 0x1293 Belkin
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor AINCOMM 0x12fd Aincomm
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor MOBILITY 0x1342 Mobility
vendor SHARK 0x13d2 Shark
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor SILICOM 0x1485 Silicom
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor SILICONPORTALS 0x1527 Silicon Portals
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor SOHOWARE 0x15e8 SOHOware
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor UMAX 0x1606 UMAX
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor INSIDEOUT 0x1608 Inside Out Networks
vendor ENTREGA 0x1645 Entrega
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ACTIONTEC 0x1668 Actiontec
Add device ID for atuwi USB wlan driver, Linksys WUSB11 v2.8 wireless adapter. (Atmel at76c503a http://vitsch.net/bsd/atuwi) PR: kern/68465 Submitted by: Suihong Liang <s2liang@uwaterloo.ca>
2004-07-04 09:13:53 +00:00
vendor LINKSYS3 0x1915 Linksys
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor DLINK 0x2001 D-Link
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor ERICSSON 0x2282 Ericsson
vendor MOTOROLA2 0x22b8 Motorola
vendor TRIPPLITE 0x2478 Tripp-Lite
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor HIROSE 0x2631 Hirose
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor NHJ 0x2770 NHJ
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor PLANEX 0x2c02 Planex
vendor VIDZMEDIA 0x3275 VidzMedia
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor AEI 0x3334 AEI
vendor PQI 0x3538 PQI
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor DAISY 0x3579 Daisy
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor NI 0x3923 National Instruments
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor MICRONET 0x3980 Micronet
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor IODATA2 0x40bb I-O Data
vendor IRIVER 0x4102 iRiver
Add support DELL BC02 Bluetooth USB Adapter(TrueMobile 300) PR: kern/65777 Submitted by: Patrick Hurrelmann <outi@bytephobia.de>
2004-04-27 13:55:26 +00:00
vendor DELL 0x413c Dell
Finish merging usb vendors from NetBSD.
2004-12-31 18:37:49 +00:00
vendor AVERATEC 0x50c2 Averatec
Eliminate the redundant/verbose portion of the company names. Generally omit semiconductor, electronics, inc, corp, pny, ltd and the like. This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
vendor ONSPEC2 0x55aa OnSpec
Add Sitecom's LN-029 USB 2.0 Ethernet adapter.
2004-09-18 19:48:10 +00:00
vendor SITECOM 0x6189 Sitecom
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor INTEL 0x8086 Intel
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor HP2 0xf003 Hewlett Packard
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
/*
* List of known products. Grouped by vendor.
*/
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* 3Com products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product 3COM HOMECONN 0x009d HomeConnect Camera
product 3COM 3CREB96 0x00a0 Bluetooth dongle
product 3COM 3C19250 0x03E8 3C19250 Ethernet
Add the device ID for the 3Com 3CRSHEW696 wireless adapter. PR: kern/73286 Submitted by: Daan Vreeken
2004-11-28 21:40:36 +00:00
product 3COM 3CRSHEW696 0x0a01 3CRSHEW696 Wireless adapter
Add 4300C Id Submitted by: Ernst de Haan <ernst@heinz.jollem.com>
2001-04-30 17:37:11 +00:00
product 3COM USR56K 0x3021 U.S.Robotics 56000 Voice Faxmodem Pro
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
product 3COM 3C460 0x11f8 HomeConnect 3C460
product 3COM 3C460B 0x4601 HomeConnect 3C460B
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product 3COMUSR OFFICECONN 0x0082 3Com OfficeConnect Analog Modem
product 3COMUSR USRISDN 0x008f 3Com U.S. Robotics Pro ISDN TA
product 3COMUSR HOMECONN 0x009d 3Com HomeConnect camera
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product 3COMUSR USR56K 0x3021 U.S.Robotics 56000 Voice Faxmodem Pro
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add some ids from NetBSD.
2001-02-05 11:02:50 +00:00
/* AboCom products */
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
product ABOCOM XX1 0x110c XX1
product ABOCOM XX2 0x200c XX2
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product ABOCOM URE450 0x4000 URE450 Ethernet
product ABOCOM UFE1000 0x4002 UFE1000 Fast Ethernet
product ABOCOM DSB650TX_PNA 0x4003 1/10/100 ethernet
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
product ABOCOM XX4 0x4004 XX4
product ABOCOM XX5 0x4007 XX5
product ABOCOM XX6 0x400b XX6
product ABOCOM XX7 0x400c XX7
product ABOCOM XX8 0x4102 XX8
product ABOCOM XX9 0x4104 XX9
product ABOCOM XX10 0xabc1 XX10
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
Update comments and product identifiers so that they're the same as NetBSD's definitions.
2002-02-02 21:09:54 +00:00
/* Accton products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product ACCTON USB320_EC 0x1046 USB320-EC Ethernet
product ACCTON SS1001 0x5046 SpeedStream Ethernet
Add entry for Accton USB320-EC Ethernet adapter. MFC after: 14
2001-09-09 03:07:15 +00:00
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* Acer Peripherals, Inc. products */
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
product ACERP ACERSCAN_C310U 0x12a6 Acerscan C310U
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
product ACERP ACERSCAN_320U 0x2022 Acerscan 320U
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
product ACERP ACERSCAN_640U 0x2040 Acerscan 640U
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product ACERP ACERSCAN_620U 0x2060 Acerscan 620U
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
product ACERP AWL300 0x9000 AWL300 Wireless adapter
product ACERP AWL400 0x9001 AWL400 Wireless adapter
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* ActiveWire, Inc. products */
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product ACTIVEWIRE IOBOARD 0x0100 I/O Board
product ACTIVEWIRE IOBOARD_FW1 0x0101 I/O Board, rev. 1 firmware
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add the Actiontec 801UAT1/HWU01170-01 802.11b USB Wireless Ethernet adapter.
2003-10-10 16:04:21 +00:00
/* Actiontec, Inc. products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product ACTIONTEC UAT1 0x7605 UAT1 Wireless Ethernet
Add the Actiontec 801UAT1/HWU01170-01 802.11b USB Wireless Ethernet adapter.
2003-10-10 16:04:21 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* ADMtek products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product ADMTEK PEGASUS 0x0986 AN986 Ethernet
product ADMTEK PEGASUSII 0x8511 AN8511 Ethernet
product ADMTEK PEGASUSII_2 0x8513 AN8513 Ethernet
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* ADS products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product ADS UBS10BT 0x0008 UBS-10BT Ethernet
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add Agate Q-Drive. Submitted by: Ian Cartwright <ian351c@home.com>
2001-04-02 13:11:59 +00:00
/* Agate Technologies products */
product AGATE QDRIVE 0x0378 Q-Drive
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
/* AGFA products */
product AGFA SNAPSCAN1212U 0x0001 SnapScan 1212U
Add some AGFA scanners: SnapScan 1236U SnapScan e20 SnapScan e25 SnapScan e26 SnapScan e40 SnapScan e50 SnapScan e52 PR: kern/32649 Submitted by: "Erik H. Bakke" <ebakke@trolltech.com>
2001-12-10 11:40:38 +00:00
product AGFA SNAPSCAN1236U 0x0002 SnapScan 1236U
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product AGFA SNAPSCANTOUCH 0x0100 SnapScan Touch
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
product AGFA SNAPSCAN1212U2 0x2061 SnapScan 1212U
Add some AGFA scanners: SnapScan 1236U SnapScan e20 SnapScan e25 SnapScan e26 SnapScan e40 SnapScan e50 SnapScan e52 PR: kern/32649 Submitted by: "Erik H. Bakke" <ebakke@trolltech.com>
2001-12-10 11:40:38 +00:00
product AGFA SNAPSCANE40 0x208d SnapScan e40
product AGFA SNAPSCANE50 0x208f SnapScan e50
product AGFA SNAPSCANE20 0x2091 SnapScan e20
product AGFA SNAPSCANE25 0x2095 SnapScan e25
product AGFA SNAPSCANE26 0x2097 SnapScan e26
product AGFA SNAPSCANE52 0x20fd SnapScan e52
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
/* Ain Communication Technology products */
product AINCOMM AWU2000B 0x1001 AWU2000B Wireless adapter
Add device ID for atuwi USB wlan driver, (Atmel at76c503a http://vitsch.net/bsd/atuwi) o AINCOMM AWU2000B o ATMEL WL1130USB PR: kern/72195 Submitted by: Daan Vreeken [PA4DAN] <Danovitsch@Vitsch.net> MFC after: 1 week
2004-10-03 09:30:09 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* AKS products */
product AKS USBHASP 0x0001 USB-HASP 0.06
Add Sun keyboard and NetChip
2000-01-10 22:31:01 +00:00
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
/* Alcor Micro, Inc. products */
product ALCOR2 KBD_HUB 0x2802 Kbd Hub
product ALCOR MA_KBD_HUB 0x9213 MacAlly Kbd Hub
product ALCOR AU9814 0x9215 AU9814 Hub
product ALCOR SM_KBD 0x9410 MicroConnectors/StrongMan Keyboard
product ALCOR NEC_KBD_HUB 0x9472 NEC Kbd Hub
Add Alcor Keyboard with built-in hub and its keyboard.
2000-05-09 20:43:37 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Altec Lansing products */
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product ALTEC ADA70 0x0070 ADA70 Speakers
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product ALTEC ASC495 0xff05 ASC495 Speakers
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* American Power Conversion products */
product APC UPSPRO500 0x0002 Back-UPS Pro 500
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Anchor products */
product ANCHOR EZUSB 0x2131 EZUSB
Add the EzLink adapter Id
2000-05-01 20:26:12 +00:00
product ANCHOR EZLINK 0x2720 EZLINK
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* AOX, Inc. products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product AOX USB101 0x0008 Ethernet
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
/* Apple Computer products */
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product APPLE OPTMOUSE 0x0302 Optical mouse
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
product APPLE SPEAKERS 0x1101 Speakers
usbdevs entry for Asahi Optical OPTIO 230 digital camera. Regen.
2003-03-11 01:41:33 +00:00
/* Asahi Optical products */
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
product ASAHIOPTICAL OPTIO230 0x0004 Digital camera
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product ASAHIOPTICAL OPTIO330 0x0006 Digital camera
usbdevs entry for Asahi Optical OPTIO 230 digital camera. Regen.
2003-03-11 01:41:33 +00:00
Add device driver support for the ASIX Electronics AX88172 USB 2.0 ethernet controller. The driver has been tested with the LinkSys USB200M adapter. I know for a fact that there are other devices out there with this chip but don't have all the USB vendor/device IDs. Note: I'm not sure if this will force the driver to end up in the install kernel image or not. Special magic needs to be done to exclude it to keep the boot floppies from bloating again, someone please advise.
2003-04-20 19:05:33 +00:00
/* ASIX Electronics products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product ASIX AX88172 0x1720 10/100 ethernet
Add device driver support for the ASIX Electronics AX88172 USB 2.0 ethernet controller. The driver has been tested with the LinkSys USB200M adapter. I know for a fact that there are other devices out there with this chip but don't have all the USB vendor/device IDs. Note: I'm not sure if this will force the driver to end up in the install kernel image or not. Special magic needs to be done to exclude it to keep the boot floppies from bloating again, someone please advise.
2003-04-20 19:05:33 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* ATen products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product ATEN UC1284 0x2001 Parallel printer
product ATEN UC10T 0x2002 10Mbps ethernet
product ATEN UC232A 0x2008 Serial
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
/* Atmel Comp. products */
product ATMEL UHB124 0x3301 UHB124 hub
Add some device ID for atuwi USB wlan driver (Atmel at76c503a http://vitsch.net/bsd/atuwi) Fix ATMEL DWL-120 Wireless adapter product ID. (I checked http://www.linux-usb.org/usb.ids) PR: kern/66227 Submitted by: Daan Vreeken [PA4DAN] <Danovitsch@Vitsch.net>
2004-05-04 09:39:44 +00:00
product ATMEL DWL120 0x7603 DWL-120 Wireless adapter
Add device IDs for the Bluetake BW002, yet another Atmel AT76C503A variant. These are found in a flavour of MiniITX board which I'm playing with right now.
2003-12-16 17:54:41 +00:00
product ATMEL BW002 0x7605 BW002 Wireless adapter
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
product ATMEL WL1130USB 0x7613 WL-1130 USB
product ATMEL AT76C505A 0x7614 AT76c505a Wireless adapter
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
/* Avision products */
product AVISION 1200U 0x0268 1200U scanner
Add support for the B&B Electronics USB->RS422/485 adapter. PR: kern/73178 Submitted by: Scott Price <prices@dflytech.com>
2004-10-30 09:21:44 +00:00
/* B&B Electronics products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product BBELECTRONICS USOTL4 0xAC01 RS-422/485
Add support for the B&B Electronics USB->RS422/485 adapter. PR: kern/73178 Submitted by: Scott Price <prices@dflytech.com>
2004-10-30 09:21:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Belkin products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
/*product BELKIN F5U111 0x???? F5U111 Ethernet*/
product BELKIN2 F5U002 0x0002 F5U002 Parallel printer
product BELKIN USB2LAN 0x0121 USB to LAN
product BELKIN F5U103 0x0103 F5U103 Serial
product BELKIN F5U109 0x0109 F5U109 Serial
Add HP 4400C, Belkin F5U208 VideoBusII
2003-09-19 22:42:51 +00:00
product BELKIN F5U208 0x0208 F5U208 VideoBus II
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product BELKIN F5U409 0x0409 F5U409 Serial
Add support for Belkin F5U409 serial-usb adapter PR: kern/69804 Submitted by: Dan Nelson <dnelson@allantgroup.com>
2004-08-07 23:45:04 +00:00
product BELKIN F5U120 0x1203 F5U120-PC Hub
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Billionton products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product BILLIONTON USB100 0x0986 USB100N 10/100 FastEthernet
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
product BILLIONTON USBLP100 0x0987 USB100LP
product BILLIONTON USBEL100 0x0988 USB100EL
product BILLIONTON USBE100 0x8511 USBE100
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
/* Broadcom products */
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
product BROADCOM BCM2033 0x2033 BCM2033 Bluetooth USB dongle
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Brother Industries products */
product BROTHER HL1050 0x0002 HL-1050 laser printer
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
/* Behavior Technology Computer products */
product BTC BTC7932 0x6782 Keyboard with mouse port
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* Canon, Inc. products */
Added some new devices and made slight changes to some existing ones. Submitted by: Andre Guibert de Bruet <andy@siliconlandmark.com>
2003-06-25 22:50:57 +00:00
product CANON N656U 0x2206 CanoScan N656U
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product CANON N1220U 0x2207 CanoScan N1220U
product CANON N676U 0x220d CanoScan N676U
Added some new devices and made slight changes to some existing ones. Submitted by: Andre Guibert de Bruet <andy@siliconlandmark.com>
2003-06-25 22:50:57 +00:00
product CANON N1240U 0x220e CanoScan N1240U
From NetBSD
2001-04-12 10:59:30 +00:00
product CANON S10 0x3041 PowerShot S10
product CANON S100 0x3045 PowerShot S100
Added some new devices and made slight changes to some existing ones. Submitted by: Andre Guibert de Bruet <andy@siliconlandmark.com>
2003-06-25 22:50:57 +00:00
product CANON S200 0x3065 PowerShot S200
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* CATC products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product CATC NETMATE 0x000a Netmate ethernet
product CATC NETMATE2 0x000c Netmate2 ethernet
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product CATC CHIEF 0x000d USB Chief Bus & Protocol Analyzer
product CATC ANDROMEDA 0x1237 Andromeda hub
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
/* CASIO products */
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product CASIO NAMELAND 0x4001 CASIO Nameland EZ-USB
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Cherry products */
product CHERRY MY3000KBD 0x0001 My3000 keyboard
product CHERRY MY3000HUB 0x0003 My3000 hub
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product CHERRY CYBOARD 0x0004 CyBoard Keyboard
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Chic Technology products */
product CHIC MOUSE1 0x0001 mouse
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product CHIC CYPRESS 0x0003 Cypress USB Mouse
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
/* Chicony products */
product CHICONY KB8933 0x0001 KB-8933 keyboard
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
/* Compaq products */
product COMPAQ PJB100 0x504a Personal Jukebox PJB100
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Connectix products */
product CONNECTIX QUICKCAM 0x0001 QuickCam
Add device driver support for USB ethernet adapters based on the Kawasaki LSI KL5KUSB101B chip, including the LinkSys USB10T, the Entrega NET-USB-E45, the Peracom USB Ethernet Adapter, the 3Com 3c19250 and the ADS Technologies USB-10BT. This device is 10mbs half-duplex only, so there's miibus or ifmedia support. This device also requires firmware to be loaded into it, however KLSI allows redistribution of the firmware images (I specifically asked about this; they said it was ok). Special thanks to Annelise Anderson for getting me in touch with KLSI (eventually) and thanks to KLSI for providing the necessary programming info. Highlights: - Add driver files to /sys/dev/usb - update usbdevs and regenerate attendate files - update usb_quirks.c - Update HARDWARE.TXT and RELNOTES.TXT for i386 and alpha - Update LINT, GENERIC and others for i386, alpha and pc98 - Add man page - Add module - Update sysinstall and userconfig.c
2000-01-05 04:27:24 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Corega products */
product COREGA ETHER_USB_T 0x0001 Ether USB-T
Add Corega FEther USB-TX. Submitted by: iwasaki Approved by: jkh
2000-03-09 16:28:58 +00:00
product COREGA FETHER_USB_TX 0x0004 FEther USB-TX
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
product COREGA FETHER_USB_TXS 0x000d FEther USB-TXS
add support DM9601(DAVICOM USB to Ethernet MAC Controller with Integrated 10/100 PHY) - Corega FEther USB-TXC PR: kern/62932 Submitted by: HASHI Hiroaki <hashiz@tomba.cskk-sv.co.jp> Obtained from: NetBSD
2004-02-28 00:12:47 +00:00
product COREGA FETHER_USB_TXC 0x9601 FEther USB-TXC
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Nikon E990 and Nomad MP3 player Ids. Submitted by: pete@altadena.net
2001-01-18 00:15:49 +00:00
/* Creative products */
* Correct a broken entry * Add the id for the Rio 800 USB. Submitted by: Wesley Morgan <morganw@chemikals.org>
2001-02-05 11:00:13 +00:00
product CREATIVE NOMAD_II 0x1002 Nomad II MP3 player
Nikon E990 and Nomad MP3 player Ids. Submitted by: pete@altadena.net
2001-01-18 00:15:49 +00:00
Add support for Crystalfontz CFA-631 USB LCD (uftdi(4) driver). For some very unclear reason this device contains a FTDI 8U232AM USB->COM adapter, but reports different device id than original 8U232AM. At the same time, it reports vendor id of FTDI. Sponsored by: Porta Software Ltd MFC after: 2 weeks
2004-01-24 21:23:12 +00:00
/* Crystalfontz products */
product FTDI CFA_631 0xfc0c Crystalfontz CFA-631 USB LCD
Add support for Crystalfontz CFA-632, CFA-633 and CFA-634, all of them are based on the same USB->COM bridge, but have different product IDs. PR: Submitted by: Reviewed by: Approved by: Obtained from: http://www.tnpi.biz/computing/freebsd/crystalfontz.shtml MFC after: 3 days
2004-03-18 01:02:46 +00:00
product FTDI CFA_632 0xfc08 Crystalfontz CFA-632 USB LCD
product FTDI CFA_633 0xfc0b Crystalfontz CFA-633 USB LCD
product FTDI CFA_634 0xfc09 Crystalfontz CFA-634 USB LCD
Add support Sony/Ericsson SEMC DSS-20 SyncStation, which can be used to communicate with the P900 mobile phone. PR: misc/67606 Submitted by: Christian Gusenbauer <c47g@gmx.at> MFC after: 1 week
2004-06-05 21:33:59 +00:00
product FTDI SEMC_DSS20 0xfc82 SEMC DSS-20 SyncStation
Add support for Crystalfontz CFA-631 USB LCD (uftdi(4) driver). For some very unclear reason this device contains a FTDI 8U232AM USB->COM adapter, but reports different device id than original 8U232AM. At the same time, it reports vendor id of FTDI. Sponsored by: Porta Software Ltd MFC after: 2 weeks
2004-01-24 21:23:12 +00:00
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
/* Cambridge Silicon Radio Ltd. products */
Add few new USB vendor/product IDs for Bluetooth USB devices. Regen. Reviewed by: imp (mentor) Approved by: imp (mentor)
2003-12-30 22:10:29 +00:00
product CSR BT_DONGLE 0x0001 Bluetooth USB dongle
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product CSR CSRDFU 0xffff USB Bluetooth Device in DFU State
Add few new USB vendor/product IDs for Bluetooth USB devices. Regen. Reviewed by: imp (mentor) Approved by: imp (mentor)
2003-12-30 22:10:29 +00:00
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
/* CTX products */
product CTX EX1300 0x9999 Ex1300 hub
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Cypress Semiconductor products */
product CYPRESS MOUSE 0x0001 mouse
product CYPRESS THERMO 0x0002 thermometer
Sync with NetBSD
2000-05-07 19:44:16 +00:00
product CYPRESS FMRADIO 0x1002 FM Radio
Add an entry for the Cypress slim hub. Submitted by: Alexander Pohoyda <alexander.pohoyda@gmx.net>
2003-07-14 17:14:04 +00:00
product CYPRESS SLIM_HUB 0x6560 Slim Hub
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add support of PhotoClip USB Camera (http://www.myphotoclip.com): - Vendor&Device IDs for USB product, - quirk for SCSI CAM. PR: 34481 Submitted by: Olexander Kunytsa <kunia@x-telecom.net> MFC in: 3 days
2002-01-31 11:39:17 +00:00
/* Daisy Technology products */
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
product DAISY DMC 0x6901 USB MultiMedia Reader
Add support of PhotoClip USB Camera (http://www.myphotoclip.com): - Vendor&Device IDs for USB product, - quirk for SCSI CAM. PR: 34481 Submitted by: Olexander Kunytsa <kunia@x-telecom.net> MFC in: 3 days
2002-01-31 11:39:17 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Dallas Semiconductor products */
product DALLAS J6502 0x4201 J-6502 speakers
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add support DELL BC02 Bluetooth USB Adapter(TrueMobile 300) PR: kern/65777 Submitted by: Patrick Hurrelmann <outi@bytephobia.de>
2004-04-27 13:55:26 +00:00
/* Dell products */
- Fix style bug in Dell Bluetooth adapter (don't repeat Vendor in device listing). - Add generic "Port Replicator" entry for the USB Hubs used in Dell port replicators.
2004-06-27 17:27:04 +00:00
product DELL PORT 0x0058 Port Replicator
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
product DELL BC02 0x8000 BC02 Bluetooth USB Adapter
Add support DELL BC02 Bluetooth USB Adapter(TrueMobile 300) PR: kern/65777 Submitted by: Patrick Hurrelmann <outi@bytephobia.de>
2004-04-27 13:55:26 +00:00
Add Delorme Publishing Earthmate GPS
2004-06-24 05:05:56 +00:00
/* Delorme Paublishing products */
product DELORME EARTHMATE 0x0100 Earthmate GPS
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Diamond products */
product DIAMOND RIO500USB 0x0001 Rio 500 USB
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* Digi International products */
product DIGI ACCELEPORT2 0x0002 AccelePort USB 2
product DIGI ACCELEPORT4 0x0004 AccelePort USB 4
product DIGI ACCELEPORT8 0x0008 AccelePort USB 8
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
/* D-Link products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
/*product DLINK DSBS25 0x0100 DSB-S25 serial*/
product DLINK DUBE100 0x1a00 10/100 ethernet
product DLINK DSB650TX4 0x200c 10/100 ethernet
product DLINK DSB650C 0x4000 10Mbps ethernet
product DLINK DSB650TX1 0x4001 10/100 ethernet
product DLINK DSB650TX 0x4002 10/100 ethernet
product DLINK DSB650TX_PNA 0x4003 1/10/100 ethernet
product DLINK DSB650TX3 0x400b 10/100 ethernet
product DLINK DSB650TX2 0x4102 10/100 ethernet
product DLINK DSB650 0xabc1 10/100 ethernet
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* EIZO products */
product EIZO HUB 0x0000 hub
product EIZO MONITOR 0x0001 monitor
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
/* Elecom products */
product ELECOM MOUSE29UO 0x0002 mouse 29UO
product ELECOM LDUSBTX0 0x200c LD-USB/TX
product ELECOM LDUSBTX1 0x4002 LD-USB/TX
Add a couple of new aue ethernet adapters from NetBSD: ELECOM LDUSBLTX IODATA USBETTXS
2002-05-27 00:00:48 +00:00
product ELECOM LDUSBLTX 0x4005 LD-USBL/TX
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
product ELECOM LDUSBTX2 0x400b LD-USB/TX
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
product ELECOM UCSGT 0x5003 UC-SGT
product ELECOM UCSGT0 0x5004 UC-SGT
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
product ELECOM LDUSBTX3 0xabc1 LD-USB/TX
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Elsa products */
product ELSA MODEM1 0x2265 ELSA Modem Board
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
product ELSA USB2ETHERNET 0x3000 Microlink USB2Ethernet
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add some ids(not yet support) [1] EMS PSX Gun controller converter [2] CSR USB Bluetooth Device PR: kern/60378 [1] Submitted by: Samuel Tardieu <sam@rfc1149.net> [1] <jps@scxnet.de> [2]
2004-01-03 23:04:31 +00:00
/* EMS products */
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product EMS DUAL_SHOOTER 0x0003 PSX gun controller converter
Add some ids(not yet support) [1] EMS PSX Gun controller converter [2] CSR USB Bluetooth Device PR: kern/60378 [1] Submitted by: Samuel Tardieu <sam@rfc1149.net> [1] <jps@scxnet.de> [2]
2004-01-03 23:04:31 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Entrega products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product ENTREGA 1S 0x0001 1S serial
product ENTREGA 2S 0x0002 2S serial
product ENTREGA 1S25 0x0003 1S25 serial
product ENTREGA 4S 0x0004 4S serial
product ENTREGA E45 0x0005 E45 Ethernet
product ENTREGA CENTRONICS 0x0006 Parallel Port
product ENTREGA 1S9 0x0093 1S9 serial
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product ENTREGA EZUSB 0x8000 EZ-USB
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
/*product ENTREGA SERIAL 0x8001 DB25 Serial*/
product ENTREGA 2U4S 0x8004 2U4S serial/usb hub
/*product ENTREGA SERIAL_DB9 0x8093 DB9 Serial*/
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Epson products */
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
product EPSON PRINTER1 0x0001 USB Printer
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product EPSON PRINTER2 0x0002 ISD USB Smart Cable for Mac
product EPSON PRINTER3 0x0003 ISD USB Smart Cable
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product EPSON PRINTER5 0x0005 USB Printer
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product EPSON 636 0x0101 Perfection 636U / 636Photo scanner
product EPSON 610 0x0103 Perfection 610 scanner
product EPSON 1200 0x0104 Perfection 1200U / 1200Photo scanner
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product EPSON 1600 0x0107 Expression 1600 scanner
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product EPSON 1640 0x010a Perfection 1640SU scanner
product EPSON 1240 0x010b Perfection 1240U / 1240Photo scanner
Merge from NetBSD. Add lots of new scanner devices: AGFA SNAPSCAN1236U AGFA SNAPSCANE40 AGFA SNAPSCANE50 AGFA SNAPSCANE20 AGFA SNAPSCANE25 AGFA SNAPSCANE26 AGFA SNAPSCANE52 CANON N656U HP 3400CSE SCANLOGIC 336CX MUSTEK BEARPAW1200F MUSTEK 600USB MUSTEK 1200USBPLUS NATIONAL BEARPAW2400 EPSON 640U EPSON 1650 EPSON GT9700F UMAX ASTRA3400 ULTIMA 1200UBPLUS
2002-02-11 03:35:53 +00:00
product EPSON 640U 0x010c Perfection 640U scanner
Added some new devices and made slight changes to some existing ones. Submitted by: Andre Guibert de Bruet <andy@siliconlandmark.com>
2003-06-25 22:50:57 +00:00
product EPSON 1250 0x010f Perfection 1250U / 1250Photo scanner
Merge from NetBSD. Add lots of new scanner devices: AGFA SNAPSCAN1236U AGFA SNAPSCANE40 AGFA SNAPSCANE50 AGFA SNAPSCANE20 AGFA SNAPSCANE25 AGFA SNAPSCANE26 AGFA SNAPSCANE52 CANON N656U HP 3400CSE SCANLOGIC 336CX MUSTEK BEARPAW1200F MUSTEK 600USB MUSTEK 1200USBPLUS NATIONAL BEARPAW2400 EPSON 640U EPSON 1650 EPSON GT9700F UMAX ASTRA3400 ULTIMA 1200UBPLUS
2002-02-11 03:35:53 +00:00
product EPSON 1650 0x0110 Perfection 1650 scanner
product EPSON GT9700F 0x0112 GT-9700F scanner
Support the Epson GT-9300UF usb scanner. PR: kern/53929
2003-07-01 08:46:01 +00:00
product EPSON GT9300UF 0x011b GT-9300UF scanner
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product EPSON 3200 0x011c Perfection 3200 scanner
Support for the "Seiko Epson Perfection 1260 scanner". Submitted by: Michael Lestinsky <michael@lestinsky.de> MFC After: 3 days
2003-01-20 00:41:30 +00:00
product EPSON 1260 0x011d Perfection 1260 scanner
Put the Perfection 1660 scanner entry in the right place. (Entries are sorted by product id).
2003-01-27 09:43:24 +00:00
product EPSON 1660 0x011e Perfection 1660 scanner
Add EPSON Perfection 1670 scanner.
2004-03-13 08:21:22 +00:00
product EPSON 1670 0x011f Perfection 1670 scanner
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
/* e-TEK Labs products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product ETEK 1COM 0x8007 Serial
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
/* Extended Systems products */
product EXTENDED XTNDACCESS 0x0100 XTNDAccess IrDA
Add entries for: Belkin F5U103 Belkin F5U120-PC Hub GoHubs GoCOM232 Peracom single port USB-to-serial adapters. Reviewed by: n_hibma Approved by: obrien
2002-10-08 03:00:37 +00:00
/* GoHubs products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product GOHUBS GOCOM232 0x1001 GoCOM232 Serial
Add entries for: Belkin F5U103 Belkin F5U120-PC Hub GoHubs GoCOM232 Peracom single port USB-to-serial adapters. Reviewed by: n_hibma Approved by: obrien
2002-10-08 03:00:37 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Gravis products */
product GRAVIS GAMEPADPRO 0x4001 GamePad Pro
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
/* GREENHOUSE products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product GREENHOUSE KANA21 0x0001 CF-writer with MP3
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
/* Griffin Technology */
Add some ids from NetBSD.
2001-02-05 11:02:50 +00:00
product GRIFFIN IMATE 0x0405 iMate, ADB adapter
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
Add Freecom + product; Update NetBSD's copyright
2000-04-03 14:47:43 +00:00
/* Freecom products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product FREECOM DVD 0xfc01 DVD drive
Add Freecom + product; Update NetBSD's copyright
2000-04-03 14:47:43 +00:00
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* Future Technology Devices products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product FTDI SERIAL_8U100AX 0x8372 8U100AX Serial
product FTDI SERIAL_8U232AM 0x6001 8U232AM Serial
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
Sync with NetBSD
2000-10-25 10:13:47 +00:00
/* Fuji photo products */
product FUJIPHOTO MASS0100 0x0100 Mass Storage
Add support FUJITSU AH-F401U Air H device Submitted by: [bsd-nomads:16601] Kouichi ABE (WALL) <kouichi@MysticWALL.COM>
2003-02-07 12:53:21 +00:00
/* Fujitsu protducts */
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product FUJITSU AH_F401U 0x105b AH-F401U Air H device
Add the Qualcomm CDMA Technologies MSM phone (umodem) device. Submitted by: Sean Welch <welchsm@earthlink.net> MFC after: 1 week
2004-01-13 21:42:32 +00:00
Added some new devices and made slight changes to some existing ones. Submitted by: Andre Guibert de Bruet <andy@siliconlandmark.com>
2003-06-25 22:50:57 +00:00
/* General Instruments (Motorola) products */
product GENERALINSTMNTS SB5100 0x5100 SURFboard SB5100 Cable modem
Add Genesys Logic products - GL650 HUB - GL641USB CompactFlash Card Reade - GL641USB USB-IDE Bridge Add MELCO product - USB-IDE Bridge: DUB-PxxG
2003-02-01 22:50:50 +00:00
/* Genesys Logic products */
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product GENESYS GL650 0x0604 GL650 Hub
product GENESYS GL641USB 0x0700 GL641USB CompactFlash Card Reader
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
product GENESYS GL641USB2IDE_2 0x0701 GL641USB USB-IDE Bridge No 2
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product GENESYS GL641USB2IDE 0x0702 GL641USB USB-IDE Bridge
Add Genesys Logic products - GL650 HUB - GL641USB CompactFlash Card Reade - GL641USB USB-IDE Bridge Add MELCO product - USB-IDE Bridge: DUB-PxxG
2003-02-01 22:50:50 +00:00
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
/* HAL Corporation products */
product HAL IMR001 0x0011 Crossam2+USB IR commander
Add vendor IDs, and device IDs supported by uplcom(4). - SOURCENEXT Corp. KeikaiDenwa 8 [1] - SOUECENEXT Corp. KeikaiDenwa 8 with charger [2] - HAL Corp. Crossam2+USB [3] Submitted by: [1] Ryo ONODERA <ryo3327@netscape.net> [2] Masaki Mizutani <m-saki@rr.iij4u.or.jp> [3] FUJISHIMA Satsuki <sf@FreeBSD.org> MFC after: 1 week
2003-11-16 12:05:11 +00:00
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
/* Hagiwara products */
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product HAGIWARA FGSM 0x0002 FlashGate SmartMedia Card Reader
product HAGIWARA FGCF 0x0003 FlashGate CompactFlash Card Reader
product HAGIWARA FG 0x0005 FlashGate
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* Handspring, Inc. */
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product HANDSPRING VISOR 0x0100 Handspring Visor
MFNetBSD: Update the list of devices that can attach to uvisor (untested).
2003-07-14 19:30:01 +00:00
product HANDSPRING TREO 0x0200 Handspring Treo
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product HANDSPRING TREO600 0x0300 Handspring Treo 600
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
/* Hauppauge Computer Works */
product HAUPPAUGE WINTV_USB_FM 0x4d12 WinTV USB FM
Support the Hawking Technology's UF100 Pegasus II 10/100 USB Ethernet.
2003-09-18 15:41:07 +00:00
/* Hawking Technologies products */
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product HAWKING UF100 0x400c 10/100 USB Ethernet
Support the Hawking Technology's UF100 Pegasus II 10/100 USB Ethernet.
2003-09-18 15:41:07 +00:00
Quirk for Hitachi DVD USB drive. It returns "invalid field in cdb" for normal INQUIRY requests so enable the NO_INQUIRY quirk. Submitted by: Lars Eggert <larse@ISI.EDU> Approved by: re (scottl)
2003-05-21 00:22:07 +00:00
/* Hitachi, Ltd. products */
product HITACHI DVDCAM_USB 0x001e DVDCAM USB HS Interface
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* HP products */
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product HP 895C 0x0004 DeskJet 895C
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product HP 4100C 0x0101 Scanjet 4100C
Sync with NetBSD
2000-10-25 10:13:47 +00:00
product HP S20 0x0102 Photosmart S20
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product HP 880C 0x0104 DeskJet 880C
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product HP 4200C 0x0105 ScanJet 4200C
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product HP CDWRITERPLUS 0x0107 CD-Writer Plus
product HP KBDHUB 0x010c Multimedia Keyboard Hub
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product HP G55XI 0x0111 OfficeJet G55xi
product HP HN210W 0x011c HN210W 802.11b WLAN
product HP 49GPLUS 0x0121 49g+ graphing calculator
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product HP 6200C 0x0201 ScanJet 6200C
product HP S20b 0x0202 PhotoSmart S20
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product HP 815C 0x0204 DeskJet 815C
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product HP 3300C 0x0205 ScanJet 3300C
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product HP CDW8200 0x0207 CD-Writer Plus 8200e
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product HP MMKEYB 0x020c Multimedia keyboard
Fix a typo in the definition of HP1220C and add a quick entry for broken bidir mode for at as well.
2002-04-06 13:28:02 +00:00
product HP 1220C 0x0212 DeskJet 1220C
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product HP 810C 0x0304 DeskJet 810C/812C
product HP 4300C 0x0305 Scanjet 4300C
product HP G85XI 0x0311 OfficeJet G85xi
Add an entry for HP LaserJet 1200.
2002-04-08 10:16:19 +00:00
product HP 1200 0x0317 LaserJet 1200
Sync with NetBSD
2000-10-25 10:13:47 +00:00
product HP 5200C 0x0401 Scanjet 5200C
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product HP 830C 0x0404 DeskJet 830C
product HP 3400CSE 0x0405 ScanJet 3400cse
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product HP 6300C 0x0601 Scanjet 6300C
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product HP 840C 0x0604 DeskJet 840c
Add the HP ScanJet 2200C.
2002-07-31 09:07:56 +00:00
product HP 2200C 0x0605 ScanJet 2200C
Sync with NetBSD
2000-10-25 10:13:47 +00:00
product HP 5300C 0x0701 Scanjet 5300C
Add HP 4400C, Belkin F5U208 VideoBusII
2003-09-19 22:42:51 +00:00
product HP 4400C 0x0705 Scanjet 4400C
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
product HP 2300D 0x0b17 Laserjet 2300d
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product HP 970CSE 0x1004 Deskjet 970Cse
Add some more printer devices: DeskJet 1220C from phk Scanjet 5400C from NetBSD Inkjet P-2000U from NetBSD
2002-04-06 13:06:07 +00:00
product HP 5400C 0x1005 Scanjet 5400C
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product HP 930C 0x1204 DeskJet 930c
Add some more printer devices: DeskJet 1220C from phk Scanjet 5400C from NetBSD Inkjet P-2000U from NetBSD
2002-04-06 13:06:07 +00:00
product HP P2000U 0x1801 Inkjet P-2000U
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product HP 640C 0x2004 DeskJet 640c
Add identifiers for the HP Laserjet 2300d USB printer and the HP ScanJet 4670v USB scanner. MFC after: 1 week
2004-10-24 11:16:29 +00:00
product HP 4670V 0x3005 ScanJet 4670v
Sync with NetBSD
2000-10-25 10:13:47 +00:00
product HP P1100 0x3102 Photosmart P1100
Add support HP hn210e usb ethernet PR: kern/60156 Submitted by: M. L. Dodson <bdodson@scms.utmb.edu>
2003-12-17 14:23:07 +00:00
product HP HN210E 0x811c Ethernet HN210E
Add HP PhotoSmart C500 id. PR: kern/21841 Submitted by: josh@zipperup.org
2000-10-08 21:31:39 +00:00
Sync with NetBSD
2000-10-25 10:13:47 +00:00
/* HP products */
Add HP PhotoSmart C500 id. PR: kern/21841 Submitted by: josh@zipperup.org
2000-10-08 21:31:39 +00:00
product HP2 C500 0x6002 PhotoSmart C500
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add vendor IBM product USB CD-ROM Drive
2000-08-26 05:06:40 +00:00
/* IBM Corporation */
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
product IBM USBCDROMDRIVE 0x4427 USB CD-ROM Drive
Add vendor IBM product USB CD-ROM Drive
2000-08-26 05:06:40 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Inside Out Networks products */
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
product INSIDEOUT EDGEPORT4 0x0001 EdgePort/4 serial ports
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* In-System products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product INSYSTEM F5U002 0x0002 Parallel printer
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product INSYSTEM ATAPI 0x0031 ATAPI adapter
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
product INSYSTEM ISD110 0x0200 IDE adapter ISD110
product INSYSTEM ISD105 0x0202 IDE adapter ISD105
InSystem USB Cable (IDE adapter) Submitted by: "Sean O'Connell" <sean@stat.duke.edu>
2000-06-08 19:26:16 +00:00
product INSYSTEM USBCABLE 0x081a USB cable
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Intel products */
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product INTEL EASYPC_CAMERA 0x0110 Easy PC Camera
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product INTEL TESTBOARD 0x9890 82930 test board
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add the Intersil Prism2/Atmel device. These particular devices are strange beasts which are reported to exist in both Atmel and Prism2 flavours. In particular, Itronix branded laptops have the Atmel part with an Intersil radio. Obtained from: NetBSD
2003-10-10 21:01:00 +00:00
/* Intersil products */
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
product INTERSIL PRISM_2X 0x3642 Prism2.x or Atmel WLAN
Add the Intersil Prism2/Atmel device. These particular devices are strange beasts which are reported to exist in both Atmel and Prism2 flavours. In particular, Itronix branded laptops have the Atmel part with an Intersil radio. Obtained from: NetBSD
2003-10-10 21:01:00 +00:00
Add support to the uftdi driver for Intrepid Control Systems' vehicle bus interfaces. These interfaces use the FTDI chipset with different Vendor and Product IDs. Add two additional baud rate enumerations. The vehicle bus interfaces use a baud rate of 2000000. Also add 3000000 as it is the other FTDI baud divisor special case. I've commited a slightly different patch from that provided in the PR as I changed the matching code a bit yesterday. Submitted by: Mike Durian <durian at shadetreesoftware.com> PR: kern/67357
2004-07-01 17:16:20 +00:00
/* Interpid Control Systems products */
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
product INTREPIDCS VALUECAN 0x0601 ValueCAN CAN bus interface
product INTREPIDCS NEOVI 0x0701 NeoVI Blue vehicle bus interface
Add support to the uftdi driver for Intrepid Control Systems' vehicle bus interfaces. These interfaces use the FTDI chipset with different Vendor and Product IDs. Add two additional baud rate enumerations. The vehicle bus interfaces use a baud rate of 2000000. Also add 3000000 as it is the other FTDI baud divisor special case. I've commited a slightly different patch from that provided in the PR as I changed the matching code a bit yesterday. Submitted by: Mike Durian <durian at shadetreesoftware.com> PR: kern/67357
2004-07-01 17:16:20 +00:00
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
/* I/O DATA products */
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product IODATA IU_CD2 0x0204 DVD Multi-plus unit iU-CD2
product IODATA DVR_UEH8 0x0206 DVD Multi-plus unit DVR-UEH8
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product IODATA USBETT 0x0901 USB ETT
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product IODATA USBETTX 0x0904 USB ETTX
Add a couple of new aue ethernet adapters from NetBSD: ELECOM LDUSBLTX IODATA USBETTXS
2002-05-27 00:00:48 +00:00
product IODATA USBETTXS 0x0913 USB ETTX
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product IODATA USBRSAQ 0x0a03 Serial USB-RSAQ1
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
/* Iomega products */
product IOMEGA ZIP100 0x0001 Zip 100
Add Zip 250
2000-04-06 10:16:24 +00:00
product IOMEGA ZIP250 0x0030 Zip 250
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Added a few more entries. Submitted by: Lars Eggert <larse@ISI.EDU>
2003-07-11 21:17:29 +00:00
/* JVC products */
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product JVC GR_DX95 0x000a GR-DX95
Added a few more entries. Submitted by: Lars Eggert <larse@ISI.EDU>
2003-07-11 21:17:29 +00:00
Add KEYSPAN USA19QW, JRC PHONE, SANDISK SDDR75. PR: misc/48141, bin/51265, kern/49053, kern/50144
2003-05-05 08:18:53 +00:00
/* JRC products */
product JRC AH_J3001V_J3002V 0x0001 AirH\" PHONE AH-J3001V/J3002V
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* Kawasaki products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product KLSI DUH3E10BT 0x0008 USB ethernet
product KLSI DUH3E10BTN 0x0009 USB ethernet
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Kawatsu products */
product KAWATSU MH4000P 0x0003 MiniHub 4000P
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
/* Keisokugiken Corp. products */
Add ID (Keisokugiken Corp. HKS-0200 USBDAQ)
2000-03-29 15:07:20 +00:00
product KEISOKUGIKEN USBDAQ 0x0068 HKS-0200 USBDAQ
Update comments and product identifiers so that they're the same as NetBSD's definitions.
2002-02-02 21:09:54 +00:00
/* Kawasaki products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product KLSI DUH3E10BT 0x0008 DU-H3E 10BT Ethernet
Add vendor/product ID for two more KLSI-based devices, including a USB ethernet adapter being handed out by @Home.
2000-03-29 19:44:48 +00:00
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* Kensington products */
product KENSINGTON ORBIT 0x1003 Orbit USB/PS2 trackball
product KENSINGTON TURBOBALL 0x1005 TurboBall
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
/* Keyspan products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product KEYSPAN USA28 0x0101 USA-28 serial
product KEYSPAN USA28X 0x0102 USA-28X serial
product KEYSPAN USA19 0x0103 USA-19 serial
product KEYSPAN USA18X 0x0105 USA-18X serial
product KEYSPAN USA19W 0x0106 USA-19W serial
product KEYSPAN USA49W 0x0109 USA-49W serial
product KEYSPAN USA19QW 0x0118 USA-19QW serial
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
Add vendor ID for Kingston Technology and add device ID for KNU101TX USB ethernet adapter. (Yes, another one.)
2000-10-10 23:23:54 +00:00
/* Kingston products */
Sync with NetBSD
2000-10-25 10:13:47 +00:00
product KINGSTON KNU101TX 0x000a KNU101TX USB Ethernet
Add vendor ID for Kingston Technology and add device ID for KNU101TX USB ethernet adapter. (Yes, another one.)
2000-10-10 23:23:54 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Kodak products */
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product KODAK DC220 0x0100 Digital Science DC220
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product KODAK DC260 0x0110 Digital Science DC260
product KODAK DC265 0x0111 Digital Science DC265
Correct the entry for the Kodak DC290. Submitted By: Oliver Fromme <olli@dorifer.heim3.tu-clausthal.de>
2000-01-28 10:26:29 +00:00
product KODAK DC290 0x0112 Digital Science DC290
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product KODAK DC240 0x0120 Digital Science DC240
product KODAK DC280 0x0130 Digital Science DC280
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Konica Corp. Products */
product KONICA CAMERA 0x0720 Digital Color Camera
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* KYE products */
product KYE NICHE 0x0001 Niche mouse
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product KYE NETSCROLL 0x0003 Genius NetScroll mouse
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product KYE FLIGHT2000 0x1004 Flight 2000 joystick
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product KYE VIVIDPRO 0x2001 ColorPage Vivid-Pro scanner
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
add support Kyocera AH-K3001V (cellular phone in Japan) PR: kern/66779 Submitted by: Togawa Satoshi <toga@puyo.org> MFC after: 1 week
2004-05-21 01:36:48 +00:00
/* Kyocera products */
product KYOCERA AHK3001V 0x0203 AH-K3001V
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
/* LaCie products */
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product LACIE HD 0xa601 Hard Disk
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
product LACIE CDRW 0xa602 CD R/W
Lexar jumpSHOT Id. Submitted by: gshapiro
2001-04-17 15:34:22 +00:00
/* Lexar products */
product LEXAR JUMPSHOT 0x0001 jumpSHOT CompactFlash Reader
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Lexmark products */
product LEXMARK S2450 0x0009 Optra S 2450
/* Linksys products */
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product LINKSYS MAUSB2 0x0105 Camedia MAUSB-2
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
product LINKSYS USB10TX1 0x200c USB10TX
Add device ID for LinkSys USB10T ethernet adapter (0x2202).
2000-03-21 15:18:51 +00:00
product LINKSYS USB10T 0x2202 USB10T Ethernet
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product LINKSYS USB100TX 0x2203 USB100TX Ethernet
Sync with NetBSD
2000-05-07 19:44:16 +00:00
product LINKSYS USB100H1 0x2204 USB100H1 Ethernet/HPNA
Add support for the LinkSys USB10T network adapter that contains the ADMtek Pegasus AN986 USB chipset. The adapter supports both 10BaseT and 100BaseT (including full-duplex). The product code for these adapters is 0x2206.
2000-04-02 12:43:34 +00:00
product LINKSYS USB10TA 0x2206 USB10TA Ethernet
Add a bunch of USB definitions from NetBSD. This is part of an ongoing cycle of commits on all the BSDs to merge the USB vendor and device defintions.. A merge from OpenBSD is still pending. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: NetBSD MFC after: 1 week
2004-12-20 20:41:55 +00:00
product LINKSYS USB10TX2 0x400b USB10TX
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
product LINKSYS2 WUSB11 0x2219 WUSB11 Wireless adapter
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product LINKSYS2 USB200M 0x2226 USB 2.0 10/100 ethernet
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
product LINKSYS3 WUSB11v28 0x2233 WUSB11 v2.8 wireless adapter
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
/* Logitech products */
product LOGITECH M2452 0x0203 M2452 keyboard
product LOGITECH M4848 0x0301 M4848 mouse
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
product LOGITECH PAGESCAN 0x040f PageScan
product LOGITECH QUICKCAMWEB 0x0801 QuickCam Web
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
product LOGITECH QUICKCAMPRO 0x0810 QuickCam Pro
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
product LOGITECH QUICKCAMEXP 0x0840 QuickCam Express
product LOGITECH QUICKCAM 0x0850 QuickCam
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product LOGITECH N43 0xc000 N43
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
product LOGITECH N48 0xc001 N48 mouse
product LOGITECH MBA47 0xc002 M-BA47 mouse
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product LOGITECH WMMOUSE 0xc004 WingMan Gaming Mouse
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product LOGITECH BD58 0xc00c BD58 mouse
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product LOGITECH UN58A 0xc030 iFeel Mouse
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
product LOGITECH BB13 0xc401 USB-PS/2 Trackball
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product LOGITECH WMPAD 0xc208 WingMan GamePad Extreme
- Add LOGITECH WMRPAD, MOTOROLA SB410, and SANDISK SDDR05. - Regenerate.
2003-04-10 08:24:33 +00:00
product LOGITECH WMRPAD 0xc20a WingMan RumblePad
WARNING: white space diff This code reduces the number of trailing white space to be more in line w/ NetBSD. I don't regenerate usbdevs, saving that for when it really changes.
2003-07-04 01:50:39 +00:00
product LOGITECH WMJOY 0xc281 WingMan Force joystick
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
product LOGITECH RK53 0xc501 Cordless mouse
product LOGITECH RB6 0xc503 Cordless keyboard
Added some new devices and made slight changes to some existing ones. Submitted by: Andre Guibert de Bruet <andy@siliconlandmark.com>
2003-06-25 22:50:57 +00:00
product LOGITECH MX700 0xc506 Cordless optical mouse
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
product LOGITECH QUICKCAMPRO2 0xd001 QuickCam Pro
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add support [1] Logitec LDR-H443U2 DVD-RAM/-R/+R/-RW/+RW Drive [2] Panasonic KXL-CB20AN Portable DVD-ROM/CD-R/RW Submitted by: [1] Taoka Fumiyoshi <fmysh@iijmio-mail.jp> [bsd-usb:727] [2] SHIMIZU Kazuhiro <kazuhiro@shimizu.homeip.net> [FreeBSD-users-jp 77608]
2003-12-17 13:48:58 +00:00
/* Logitec Corp. products */
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product LOGITEC LDR_H443SU2 0x0033 DVD Multi-plus unit LDR-H443SU2
product LOGITEC LDR_H443U2 0x00b3 DVD Multi-plus unit LDR-H443U2
Add support [1] Logitec LDR-H443U2 DVD-RAM/-R/+R/-RW/+RW Drive [2] Panasonic KXL-CB20AN Portable DVD-ROM/CD-R/RW Submitted by: [1] Taoka Fumiyoshi <fmysh@iijmio-mail.jp> [bsd-usb:727] [2] SHIMIZU Kazuhiro <kazuhiro@shimizu.homeip.net> [FreeBSD-users-jp 77608]
2003-12-17 13:48:58 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Lucent products */
product LUCENT EVALKIT 0x1001 USS-720 evaluation kit
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add ID for Luwen EasyDisk USB flash memory drive. PR: 41081 Submitted by: demon MFC after: 5 days
2002-07-30 11:02:35 +00:00
/* Luwen products */
product LUWEN EASYDISK 0x0005 EasyDisc
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
/* Macally products */
product MACALLY MOUSE1 0x0101 mouse
Add some device id's for Matrix Orbital's newer LCD panels. These use another ftdi usb->serial bridge with different ID's.
2004-03-02 19:01:30 +00:00
/* Matrix Orbital products */
product FTDI USBSERIAL 0xfa00 Matrix Orbital USB Serial
product FTDI MX2_3 0xfa01 Matrix Orbital MX2 or MX3
product FTDI MX4_5 0xfa02 Matrix Orbital MX4 or MX5
product FTDI LK202 0xfa03 Matrix Orbital VK/LK202 Family
product FTDI LK204 0xfa04 Matrix Orbital VK/LK204 Family
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
/* MCT Corp. */
Sync with NetBSD
2000-05-07 19:44:16 +00:00
product MCT HUB0100 0x0100 Hub
Update comments and product identifiers so that they're the same as NetBSD's definitions.
2002-02-02 21:09:54 +00:00
product MCT DU_H3SP_USB232 0x0200 D-Link DU-H3SP USB BAY Hub
Sync with NetBSD
2000-05-07 19:44:16 +00:00
product MCT USB232 0x0210 USB-232 Interface
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
product MCT SITECOM_USB232 0x0230 Sitecom USB-232 Products
Sync with NetBSD
2000-05-07 19:44:16 +00:00
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* Melco, Inc products */
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product MELCO LUATX1 0x0001 LUA-TX Ethernet
product MELCO LUATX5 0x0005 LUA-TX Ethernet
Add Melco LUA2-TX5.
2001-11-19 18:40:17 +00:00
product MELCO LUA2TX5 0x0009 LUA2-TX Ethernet
Add RealTek RTL8150 USB to fast Ethernet controller driver. This driver now supports the Melco LUA-KTX and the GREEN HOUSE GH-USB100B. Reviewed by: imp MFC after: 2 weeks
2003-05-03 10:16:56 +00:00
product MELCO LUAKTX 0x0012 LUA-KTX Ethernet
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product MELCO DUBPXXG 0x001c USB-IDE Bridge: DUB-PxxG
product MELCO LUAU2KTX 0x003d LUA-U2-KTX Ethernet
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
Sync with NetBSD
2000-10-25 10:13:47 +00:00
/* Metricom products */
product METRICOM RICOCHET_GS 0x0001 Ricochet GS
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
/* Micro Star International products */
product MSI BT_DONGLE 0x1967 Bluetooth USB dongle
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Microsoft products */
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product MICROSOFT SIDEPREC 0x0008 SideWinder Precision Pro
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product MICROSOFT INTELLIMOUSE 0x0009 IntelliMouse
product MICROSOFT NATURALKBD 0x000b Natural Keyboard Elite
product MICROSOFT DDS80 0x0014 Digital Sound System 80
product MICROSOFT SIDEWINDER 0x001a Sidewinder Precision Racing Wheel
Added some new devices and made slight changes to some existing ones. Submitted by: Andre Guibert de Bruet <andy@siliconlandmark.com>
2003-06-25 22:50:57 +00:00
product MICROSOFT INETPRO 0x001c Internet Keyboard Pro
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product MICROSOFT INTELLIEYE 0x0025 IntelliEye mouse
Added some new devices and made slight changes to some existing ones. Submitted by: Andre Guibert de Bruet <andy@siliconlandmark.com>
2003-06-25 22:50:57 +00:00
product MICROSOFT INETPRO2 0x002b Internet Keyboard Pro
Add support for a bunch of Microsoft networking products: - MN-110 10/100 USB ethernet (ADMtek Pegasus II, if_aue) - MN-120 10/100 cardbus (ADMtek Centaur-C, if_dc) - MN-130 10/100 PCI (ADMtek Centaur-P, if_dc) Also update dc(4) man page to mention support for MN-120 and MN-130.
2003-07-10 18:43:17 +00:00
product MICROSOFT MN110 0x007a 10/100 USB NIC
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
/* Microtech products */
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product MICROTECH SCSIDB25 0x0004 USB-SCSI-DB25
product MICROTECH SCSIHD50 0x0005 USB-SCSI-HD50
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
product MICROTECH DPCM 0x0006 USB CameraMate
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product MICROTECH FREECOM 0xfc01 Freecom USB-IDE
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
/* Microtek products */
product MICROTEK 336CX 0x0094 Phantom 336CX - C3 scanner
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product MICROTEK X6U 0x0099 ScanMaker X6 - X6U
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product MICROTEK C6 0x009a Phantom C6 scanner
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product MICROTEK 336CX2 0x00a0 Phantom 336CX - C3 scanner
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product MICROTEK V6USL 0x00a3 ScanMaker V6USL
Fix typo's
2000-09-05 12:26:37 +00:00
product MICROTEK V6USL2 0x80a3 ScanMaker V6USL
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product MICROTEK V6UL 0x80ac ScanMaker V6UL
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
/* Microtune, Inc. products */
product MICROTUNE BT_DONGLE 0x1000 Bluetooth USB dongle
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Midiman products */
product MIDIMAN MIDISPORT2X2 0x1001 Midisport 2x2
Add a new vendor: MINOLTA, and some products by them. Partially submitted by: asmodai
2002-04-06 12:27:23 +00:00
/* Minolta Co., Ltd. */
product MINOLTA 2300 0x4001 Dimage 2300
product MINOLTA S304 0x4007 Dimage S304
product MINOLTA X 0x4009 Dimage X
Add Support - PNY Attache Flash Drive [1] - minolta 5400 USB scanner [2] PR: kern/58045 [1] kern/56496 [2] Submitted by: [1] Rick C. Petty <rick@kiwi-computer.com> [2] Mark Diekhans <markd@kermodei.com>
2003-12-18 05:47:11 +00:00
product MINOLTA 5400 0x400e Dimage 5400
Add a new vendor: MINOLTA, and some products by them. Partially submitted by: asmodai
2002-04-06 12:27:23 +00:00
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
/* Mitsumi products */
product MITSUMI CDRRW 0x0000 CD-R/RW Drive
Add few new USB vendor/product IDs for Bluetooth USB devices. Regen. Reviewed by: imp (mentor) Approved by: imp (mentor)
2003-12-30 22:10:29 +00:00
product MITSUMI BT_DONGLE 0x641f Bluetooth USB dongle
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Motorola products */
product MOTOROLA MC141555 0x1555 MC141555 hub controller
- Add LOGITECH WMRPAD, MOTOROLA SB410, and SANDISK SDDR05. - Regenerate.
2003-04-10 08:24:33 +00:00
product MOTOROLA SB4100 0x4100 SB4100 USB Cable Modem
Add the vendor/device IDs for the LinkSys USB100TX. Note: the .INF file for LinkSys's driver says the vendor ID is 0x66b, however this does not agree with the vendor ID listed for LinkSys in the company list from www.usb.org. In fact, 0x66b doesn't seem to appear in the company list at all. Furthermore, this same vendor ID crops up in some of the D-Link .INF files. Frankly I don't know what the heck is going on here, but I need to add 0x66b to usbdevs and call it something, so here we are.
2000-01-08 07:32:48 +00:00
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
/* MultiTech products */
product MULTITECH ATLAS 0xf101 MT5634ZBA-USB modem
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Mustek products */
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product MUSTEK 1200CU 0x0001 1200 CU scanner
Sync with NetBSD
2000-10-25 10:13:47 +00:00
product MUSTEK 600CU 0x0002 600 CU scanner
product MUSTEK 1200USB 0x0003 1200 USB scanner
product MUSTEK 1200UB 0x0006 1200 UB scanner
Add Mustek, National and Ultima scanners. Submitted by: Henning Meier-Geinitz <hmg@gmx.de> PR: 29777 MFC after: 1 week
2001-08-21 21:35:40 +00:00
product MUSTEK 1200USBPLUS 0x0007 1200 USB Plus scanner
Add Mustek 1200 CU Plus scanner. Submitted by: "Ilmar S. Habibulin" <ilmar@watson.org>
2001-11-28 12:37:04 +00:00
product MUSTEK 1200CUPLUS 0x0008 1200 CU Plus scanner
Add Mustek, National and Ultima scanners. Submitted by: Henning Meier-Geinitz <hmg@gmx.de> PR: 29777 MFC after: 1 week
2001-08-21 21:35:40 +00:00
product MUSTEK BEARPAW1200F 0x0010 BearPaw 1200F scanner
USB scanner support for Mustek BearPaw scanner. Submitted by: netchild
2003-07-01 12:16:46 +00:00
product MUSTEK BEARPAW1200TA 0x021e BearPaw 1200TA scanner
Add Mustek, National and Ultima scanners. Submitted by: Henning Meier-Geinitz <hmg@gmx.de> PR: 29777 MFC after: 1 week
2001-08-21 21:35:40 +00:00
product MUSTEK 600USB 0x0873 600 USB scanner
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
product MUSTEK MDC800 0xa800 MDC-800 digital camera
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
/* M-Systems products */
product MSYSTEMS DISKONKEY 0x0010 DiskOnKey
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product MSYSTEMS DISKONKEY2 0x0011 DiskOnKey
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
Sync with NetBSD
2000-10-25 10:13:47 +00:00
/* National Semiconductor */
Update comments and product identifiers so that they're the same as NetBSD's definitions.
2002-02-02 21:09:54 +00:00
product NATIONAL BEARPAW1200 0x1000 BearPaw 1200
product NATIONAL BEARPAW2400 0x1001 BearPaw 2400
Sync with NetBSD
2000-10-25 10:13:47 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* NEC products */
product NEC HUB 0x55aa hub
product NEC HUB_B 0x55ab hub
Add the vendor and device IDs for a whole bunch of additional USB ethernet adapters that are supported by the aue and kue drivers. There are actually a couple more out there from Accton, Asante and EXP Computer, however I was not able to find any Windows device drivers for these on their servers, and hence could not harvest their vendor/device ID info. If somebody has one of these things and can look in the .inf file that comes with the Windows driver, I'd appreciate knowing what it says for 'VID' and 'PID.' Additional adapters include: the D-Link DSB-650 and DSB-650TX, the SMC 2102USB, 2104USB and 2202USB, the ATen UC10T, and the Netgear EA101. These are all mentioned in the man pages, relnotes and LINT. Also correct the date in the kue(4) man page. I wrote this thing on Jan, 4 2000, not 1999.
2000-01-07 22:18:49 +00:00
Add NEODIO TURBOCONNECT (from NetBSD)
2003-01-02 04:21:04 +00:00
/* NEODIO products */
Add support Neodio-3260 8-in-1 multi format USB memory card / flash controller PR: kern/67115 Submitted by: Jukka A. Ukkonen <jau@iki.fi> MFC after: 1 week
2004-06-05 05:23:46 +00:00
product NEODIO ND3260 0x3260 8-in-1 Multi-format Flash Controller
Add NEODIO TURBOCONNECT (from NetBSD)
2003-01-02 04:21:04 +00:00
product NEODIO ND5010 0x5010 Multi-format Flash Controller
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* NetChip Technology Products */
product NETCHIP TURBOCONNECT 0x1080 Turbo-Connect
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Netgear products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product NETGEAR EA101 0x1001 Ethernet
product NETGEAR FA120 0x1040 USB 2.0 Ethernet
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Nikon E990 and Nomad MP3 player Ids. Submitted by: pete@altadena.net
2001-01-18 00:15:49 +00:00
/* Nikon products */
product NIKON E990 0x0102 Digital Camera E990
Add support Nikon CoolScan LS40 ED PR: kern/71139 Submitted by: Pierre DAVID <Pierre.David@crc.u-strasbg.fr> MFC after: 1 week
2004-09-03 23:29:01 +00:00
product NIKON LS40 0x4000 CoolScan LS40 ED
Nikon E990 and Nomad MP3 player Ids. Submitted by: pete@altadena.net
2001-01-18 00:15:49 +00:00
Add Olympus C-700
2001-10-23 22:44:03 +00:00
/* Olympus products */
Add Olympus C-1.
2001-11-23 16:35:40 +00:00
product OLYMPUS C1 0x0102 C-1 Digital Camera
Add Olympus C-700
2001-10-23 22:44:03 +00:00
product OLYMPUS C700 0x0105 C-700 Ultra Zoom
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* OmniVision Technologies, Inc. products */
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product OMNIVISION OV511 0x0511 OV511 Camera
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
product OMNIVISION OV511PLUS 0xa511 OV511+ Camera
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add support SimpleTech UCF-100 USB CompactFlash reader(OnSpec Electronic, Inc.) PR: kern/63619 Submitted by: Greg Rivers <gcr@sa.fedex.com> MFC after: 1 week
2004-03-04 07:20:48 +00:00
/* OnSpec Electronic, Inc. */
product ONSPEC UCF100 0xa400 FlashLink UCF-100 CompactFlash Reader
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
/* Palm Computing, Inc. product */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product PALM SERIAL 0x0080 USB Serial
MFNetBSD: uvisor.c (1.14, 1.15) Add support for Palm (M500, M505, M125) and Sony devices (Clie 4.0 and 4.1).
2002-07-31 10:05:26 +00:00
product PALM M500 0x0001 Palm m500
product PALM M505 0x0002 Palm m505
Add Palm M515. Submitted by: Luiz Eduardo Roncato Cordeiro <cordeiro@nic.br>
2002-08-11 21:11:14 +00:00
product PALM M515 0x0003 Palm m515
MFNetBSD: Update the list of devices that can attach to uvisor (untested).
2003-07-14 19:30:01 +00:00
product PALM I705 0x0020 Palm i705
product PALM TUNGSTEN_Z 0x0031 Palm Tungsten Z
MFNetBSD: uvisor.c (1.14, 1.15) Add support for Palm (M500, M505, M125) and Sony devices (Clie 4.0 and 4.1).
2002-07-31 10:05:26 +00:00
product PALM M125 0x0040 Palm m125
MFNetBSD: Update the list of devices that can attach to uvisor (untested).
2003-07-14 19:30:01 +00:00
product PALM M130 0x0050 Palm m130
product PALM TUNGSTEN_T 0x0060 Palm Tungsten T
Add support for the new Zire 31 device. Submitted by: Adriaan de Groot <adridg@cs.kun.nl>
2004-05-05 19:39:24 +00:00
product PALM ZIRE31 0x0061 Palm Zire 31
MFNetBSD: Update the list of devices that can attach to uvisor (untested).
2003-07-14 19:30:01 +00:00
product PALM ZIRE 0x0070 Palm Zire
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
add '/* Panasonic products */' line(I removed it)
2004-09-20 04:56:13 +00:00
/* Panasonic products */
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product PANASONIC KXLRW32AN 0x0d09 CD-R Drive KXL-RW32AN
product PANASONIC KXLCB20AN 0x0d0a CD-R Drive KXL-CB20AN
product PANASONIC KXLCB35AN 0x0d0e DVD-ROM & CD-R/RW
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product PANASONIC SDCAAE 0x1b00 MultiMediaCard
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Peracom products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product PERACOM SERIAL1 0x0001 Serial
product PERACOM ENET 0x0002 Ethernet
product PERACOM ENET3 0x0003 At Home Ethernet
product PERACOM ENET2 0x0005 Ethernet
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Philips products */
product PHILIPS DSS350 0x0101 DSS 350 Digital Speaker System
product PHILIPS DSS 0x0104 DSS XXX Digital Speaker System
product PHILIPS HUB 0x0201 hub
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product PHILIPS PCA646VC 0x0303 PCA646VC PC Camera
Sync with NetBSD
2000-05-07 19:44:16 +00:00
product PHILIPS PCVC680K 0x0308 PCVC680K Vesta Pro PC Camera
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product PHILIPS DSS150 0x0471 DSS 150 Digital Speaker System
Add Delorme Publishing Earthmate GPS
2004-06-24 05:05:56 +00:00
product PHILIPS UM10016 0x1552 ISP 1581 Hi-Speed USB MPEG2 Encoder Reference Kit
Add DIVA USB mp3 player. Submitted by: Olexander Kunytsa <kunia@x-telecom.net> MFC after: 3 days
2001-12-12 15:58:23 +00:00
product PHILIPS DIVAUSB 0x1801 DIVA USB mp3 player
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
Add some ids from NetBSD.
2001-02-05 11:02:50 +00:00
/* Philips Semiconductor products */
product PHILIPSSEMI HUB1122 0x1122 hub
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* P.I. Engineering products */
product PIENGINEERING PS2USB 0x020b PS2 to Mac USB Adapter
Add Support - 2nd type of GL641USB USB-IDE bridge [1] - Plextor Plexwriter 40/12/40U [2] PR: kern/61671 [1] kern/61803 [2] Submitted by: Ralf Wenk <RZ-FreeBSD0401@fh-karlsruhe.de> [1] Feisal Mohammed <feisal@uwi.tt> [2] MFC after: 1 week
2004-01-24 07:14:07 +00:00
/* Plextor Corp. */
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product PLEXTOR 40_12_40U 0x0011 PlexWriter 40/12/40U
Add Support - 2nd type of GL641USB USB-IDE bridge [1] - Plextor Plexwriter 40/12/40U [2] PR: kern/61671 [1] kern/61803 [2] Submitted by: Ralf Wenk <RZ-FreeBSD0401@fh-karlsruhe.de> [1] Feisal Mohammed <feisal@uwi.tt> [2] MFC after: 1 week
2004-01-24 07:14:07 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* PLX products */
product PLX TESTBOARD 0x9060 test board
Add Support - PNY Attache Flash Drive [1] - minolta 5400 USB scanner [2] PR: kern/58045 [1] kern/56496 [2] Submitted by: [1] Rick C. Petty <rick@kiwi-computer.com> [2] Mark Diekhans <markd@kermodei.com>
2003-12-18 05:47:11 +00:00
/* PNY products */
product PNY ATTACHE 0x1300 USB 2.0 Flash Drive
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Primax products */
Sync with NetBSD
2000-10-25 10:13:47 +00:00
product PRIMAX G2X300 0x0300 G2-200 scanner
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product PRIMAX G2E300 0x0301 G2E-300 scanner
product PRIMAX G2300 0x0302 G2-300 scanner
product PRIMAX G2E3002 0x0303 G2E-300 scanner
product PRIMAX 9600 0x0340 Colorado USB 9600 scanner
product PRIMAX 600U 0x0341 Colorado 600u scanner
Add the Primax (Visioneer) 6200 scanner. Obtained from: OpenBSD (via NetBSD)
2002-07-31 08:51:32 +00:00
product PRIMAX 6200 0x0345 Visioneer 6200 scanner
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
product PRIMAX 19200 0x0360 Colorado USB 19200 scanner
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product PRIMAX 1200U 0x0361 Colorado 1200u scanner
Sync with NetBSD
2000-10-25 10:13:47 +00:00
product PRIMAX G600 0x0380 G2-600 scanner
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
product PRIMAX 636I 0x0381 ReadyScan 636i
product PRIMAX G2600 0x0382 G2-600 scanner
product PRIMAX G2E600 0x0383 G2E-600 scanner
product PRIMAX COMFORT 0x4d01 Comfort
product PRIMAX MOUSEINABOX 0x4d02 Mouse-in-a-Box
product PRIMAX PCGAUMS1 0x4d04 Sony PCGA-UMS1
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
Sync with NetBSD
2000-05-07 19:44:16 +00:00
/* Prolific products */
product PROLIFIC PL2301 0x0000 PL2301 Host-Host interface
product PROLIFIC PL2302 0x0001 PL2302 Host-Host interface
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product PROLIFIC RSAQ2 0x04bb PL2303 Serial (IODATA USB-RSAQ2)
product PROLIFIC PL2303 0x2303 PL2303 Serial (ATEN/IOGEAR UC232A)
product PROLIFIC PL2305 0x2305 Parallel printer
product PROLIFIC ATAPI4 0x2307 ATAPI-4 Controller
Sync with NetBSD
2000-05-07 19:44:16 +00:00
From NetBSD
2001-04-12 10:59:30 +00:00
/* Putercom products */
product PUTERCOM UPA100 0x047e USB-1284 BRIDGE
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
/* Qualcomm products */
product QUALCOMM CDMA_MSM 0x3196 CDMA Technologies MSM modem
product QUALCOMM2 CDMA_MSM 0x6000 CDMA Technologies MSM phone
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
/* Qtronix products */
product QTRONIX 980N 0x2011 Scorpion-980N keyboard
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* Quickshot products */
product QUICKSHOT STRIKEPAD 0x6238 USB StrikePad
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
/* Rainbow Technologies products */
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product RAINBOW IKEY2000 0x1200 i-Key 2000
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
/* ReakTek products */
Add RealTek RTL8150 USB to fast Ethernet controller driver. This driver now supports the Melco LUA-KTX and the GREEN HOUSE GH-USB100B. Reviewed by: imp MFC after: 2 weeks
2003-05-03 10:16:56 +00:00
product REALTEK USBKR100 0x8150 USBKR100 USB Ethernet (GREEN HOUSE)
Add some ids from NetBSD.
2001-02-05 11:02:50 +00:00
/* Roland products */
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product ROLAND UM1 0x0009 UM-1 MIDI I/F
product ROLAND UM880N 0x0014 EDIROL UM-880 MIDI I/F (native)
product ROLAND UM880G 0x0015 EDIROL UM-880 MIDI I/F (generic)
Add some ids from NetBSD.
2001-02-05 11:02:50 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Rockfire products */
product ROCKFIRE GAMEPAD 0x2033 gamepad 203USB
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
/* RATOC Systems products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product RATOC REXUSB60 0xb000 REX-USB60
Add a USB comm driver. Ported from NetBSD by: akiyama
2002-03-18 18:23:42 +00:00
Add vendor Samsung and device Samsung ML-6060.
2003-09-20 20:01:08 +00:00
/* Samsung products */
product SAMSUNG ML6060 0x3008 ML-6060 laser printer
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* SanDisk products */
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product SANDISK SDDR05A 0x0001 ImageMate SDDR-05a
Add a bunch of USB definitions from NetBSD. This is part of an ongoing cycle of commits on all the BSDs to merge the USB vendor and device defintions.. A merge from OpenBSD is still pending. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: NetBSD MFC after: 1 week
2004-12-20 20:41:55 +00:00
product SANDISK SDDR05 0x0005 ImageMate SDDR-05
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
product SANDISK SDDR31 0x0002 ImageMate SDDR-31
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product SANDISK SDDR12 0x0100 ImageMate SDDR-12
product SANDISK SDDR09 0x0200 ImageMate SDDR-09
Add KEYSPAN USA19QW, JRC PHONE, SANDISK SDDR75. PR: misc/48141, bin/51265, kern/49053, kern/50144
2003-05-05 08:18:53 +00:00
product SANDISK SDDR75 0x0810 ImageMate SDDR-75
add support for SanDisk Cruzer Mini 256MB USB 2.0 Flash Drive PR: kern/65438 Submitted by: Peter D. Quilty <pdquilty@adelphia.net> MFC after: 1 week
2004-08-12 23:29:22 +00:00
product SANDISK SDCZ2_256 0x7104 Cruzer Mini 256MB
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
Add Sanyo SCP-4900 phone. It needs quirks.
2003-01-01 20:18:15 +00:00
/* Sanyo Electric products */
product SANYO SCP4900 0x0701 Sanyo SCP-4900 USB Phone
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
/* ScanLogic products */
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
product SCANLOGIC SL11R 0x0002 SL11R IDE Adapter
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product SCANLOGIC 336CX 0x0300 Phantom 336CX - C3 scanner
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Shuttle Technology products */
product SHUTTLE EUSB 0x0001 E-USB Bridge
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product SHUTTLE EUSCSI 0x0002 eUSCSI Bridge
product SHUTTLE SDDR09 0x0003 ImageMate SDDR09
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
product SHUTTLE ZIOMMC 0x0006 eUSB MultiMediaCard Adapter
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product SHUTTLE HIFD 0x0007 Sony Hifd
product SHUTTLE EUSBATAPI 0x0009 eUSB ATA/ATAPI Adapter
product SHUTTLE CF 0x000a eUSB CompactFlash Adapter
product SHUTTLE EUSCSI_B 0x000b eUSCSI Bridge
product SHUTTLE EUSCSI_C 0x000c eUSCSI Bridge
product SHUTTLE CDRW 0x0101 CD-RW Device
Added some new devices and made slight changes to some existing ones. Submitted by: Andre Guibert de Bruet <andy@siliconlandmark.com>
2003-06-25 22:50:57 +00:00
product SHUTTLE EUSBORCA 0x0325 eUSB ORCA Quad Reader
Bunch of updates: - Add vendor/device ID for Corega USB-T ethernet adapter to necessary places so that it will work with the kue driver. - Add vendor/device ID for CATC Netmate devices for driver to be added soon. - Get really crazy about netisr stuff: avoid doing any mbuf allocations or deallocations at splbio/splusb. - Fix if_aue driver so that it works with LinkSys USB100TX: you need to flip the GPIO bits just the right way to put the PHY in the right mode.
2000-01-13 20:13:58 +00:00
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
/* Siemens products */
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
product SIEMENS SPEEDSTREAM 0x1001 SpeedStream USB
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
Add quirks for the EXATELECOM i-Bead mp3 player. PR: kern/51675 Submitted by: Nicolas Jombart <ecu@ipv42.net> MFC after: 3 days
2003-08-22 05:43:30 +00:00
/* Sigmatel products */
product SIGMATEL I_BEAD100 0x8008 i-Bead 100 MP3 Player
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
/* SIIG products */
product SIIG DIGIFILMREADER 0x0004 DigiFilm-Combo Reader
add support Sitecom CN-311 usb flash reader(aka SIIG_WINTERREADER) PR: kern/64722 Submitted by: Thiemo Nordenholz <nz@thiemo.net> MFC after: 1 week
2004-08-12 20:14:20 +00:00
product SIIG WINTERREADER 0x0330 WINTERREADER Reader
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product SIIG2 US2308 0x0421 Serial
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
/* Silicon Portals Inc. */
product SILICONPORTALS YAPPH_NF 0x0200 YAP Phone (no firmware)
product SILICONPORTALS YAPPHONE 0x0201 YAP Phone
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Sirius Technologies products */
product SIRIUS ROADSTER 0x0001 NetComm Roadster II 56 USB
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add Sitecom's LN-029 USB 2.0 Ethernet adapter.
2004-09-18 19:48:10 +00:00
/* Sitecom products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product SITECOM LN029 0x182d USB 2.0 Ethernet
Add Sitecom's LN-029 USB 2.0 Ethernet adapter.
2004-09-18 19:48:10 +00:00
Add entry for SmartBridges SmartLink USB ethernet adapter.
2000-04-14 14:43:34 +00:00
/* SmartBridges products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product SMARTBRIDGES SMARTLINK 0x0001 SmartLink USB ethernet
product SMARTBRIDGES SMARTNIC 0x0003 smartNIC 2 PnP ethernet
Add entry for SmartBridges SmartLink USB ethernet adapter.
2000-04-14 14:43:34 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* SMC products */
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product SMC 2102USB 0x0100 10Mbps ethernet
product SMC 2202USB 0x0200 10/100 ethernet
product SMC 2206USB 0x0201 EZ Connect USB Ethernet
Add another SMC device ID and the hub ID that it went with.
2002-03-19 10:54:40 +00:00
product SMC2 2020HUB 0x2020 USB Hub
First pass at shortening names. Likely more can be done. Generally prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
product SMC3 2662WUSB 0xa002 2662W-AR Wireless
Add another SMC device ID and the hub ID that it went with.
2002-03-19 10:54:40 +00:00
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
/* SOHOware products */
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product SOHOWARE NUB100 0x9100 10/100 USB Ethernet
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* SOLID YEAR products */
product SOLIDYEAR KEYBOARD 0x2101 Solid Year USB keyboard
Add the vendor and device IDs for a whole bunch of additional USB ethernet adapters that are supported by the aue and kue drivers. There are actually a couple more out there from Accton, Asante and EXP Computer, however I was not able to find any Windows device drivers for these on their servers, and hence could not harvest their vendor/device ID info. If somebody has one of these things and can look in the .inf file that comes with the Windows driver, I'd appreciate knowing what it says for 'VID' and 'PID.' Additional adapters include: the D-Link DSB-650 and DSB-650TX, the SMC 2102USB, 2104USB and 2202USB, the ATen UC10T, and the Netgear EA101. These are all mentioned in the man pages, relnotes and LINT. Also correct the date in the kue(4) man page. I wrote this thing on Jan, 4 2000, not 1999.
2000-01-07 22:18:49 +00:00
Add the id for the Sony memory sticks.
2000-09-04 15:29:42 +00:00
/* SONY products */
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product SONY DSC 0x0010 DSC cameras
product SONY MSACUS1 0x002d Memorystick MSAC-US1
Add support Sony Handycam TRV-30 memory stick slot PR: kern/69915 Submitted by: Christian Gusenbauer <c47g@gmx.at> MFC after: 1 week
2004-08-08 07:09:43 +00:00
product SONY HANDYCAM 0x002e Handycam
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product SONY MSC 0x0032 MSC memory stick slot
MFNetBSD: Update the list of devices that can attach to uvisor (untested).
2003-07-14 19:30:01 +00:00
product SONY CLIE_35 0x0038 Sony Clie v3.5
MFNetBSD: uvisor.c (1.14, 1.15) Add support for Palm (M500, M505, M125) and Sony devices (Clie 4.0 and 4.1).
2002-07-31 10:05:26 +00:00
product SONY CLIE_40 0x0066 Sony Clie v4.0
MFNetBSD: Update the list of devices that can attach to uvisor (untested).
2003-07-14 19:30:01 +00:00
product SONY CLIE_40_MS 0x006d Sony Clie v4.0 Memory Stick slot
product SONY CLIE_S360 0x0095 Sony Clie s360
product SONY CLIE_41_MS 0x0099 Sony Clie v4.1 Memory Stick slot
MFNetBSD: uvisor.c (1.14, 1.15) Add support for Palm (M500, M505, M125) and Sony devices (Clie 4.0 and 4.1).
2002-07-31 10:05:26 +00:00
product SONY CLIE_41 0x009a Sony Clie v4.1
MFNetBSD: Update the list of devices that can attach to uvisor (untested).
2003-07-14 19:30:01 +00:00
product SONY CLIE_NX60 0x00da Sony Clie nx60
Add the id for the Sony memory sticks.
2000-09-04 15:29:42 +00:00
Add support to Sony Ericsson USB Cable(Susteen USB Data Cable) PR: kern/66416 Submitted by: Fredrik Lindberg <fliREMOVEME@shapeshifter.se> MFC after: 1 week
2004-08-08 05:21:56 +00:00
/* Sony Ericsson products */
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product SONYERICSSON DCU10 0x0528 USB Cable
Add support to Sony Ericsson USB Cable(Susteen USB Data Cable) PR: kern/66416 Submitted by: Fredrik Lindberg <fliREMOVEME@shapeshifter.se> MFC after: 1 week
2004-08-08 05:21:56 +00:00
Add vendor IDs, and device IDs supported by uplcom(4). - SOURCENEXT Corp. KeikaiDenwa 8 [1] - SOUECENEXT Corp. KeikaiDenwa 8 with charger [2] - HAL Corp. Crossam2+USB [3] Submitted by: [1] Ryo ONODERA <ryo3327@netscape.net> [2] Masaki Mizutani <m-saki@rr.iij4u.or.jp> [3] FUJISHIMA Satsuki <sf@FreeBSD.org> MFC after: 1 week
2003-11-16 12:05:11 +00:00
/* SOURCENEXT products */
product SOURCENEXT KEIKAI8 0x039f KeikaiDenwa 8
product SOURCENEXT KEIKAI8_CHG 0x012e KeikaiDenwa 8 with charger
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* STMicroelectronics products */
product STMICRO COMMUNICATOR 0x7554 USB Communicator
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
/* STSN products */
product STSN STSN0001 0x0001 Internet Access Device
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
/* SUN Corporation products */
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product SUNTAC DS96L 0x0003 SUNTAC U-Cable type D2
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
product SUNTAC PS64P1 0x0005 SUNTAC U-Cable type P1
product SUNTAC VS10U 0x0009 SUNTAC Slipper U
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product SUNTAC IS96U 0x000a SUNTAC Ir-Trinity
product SUNTAC AS64LX 0x000b SUNTAC U-Cable type A3
Add support SUNTAC U-Cable type A4 (AS144L4) http://www.sun-denshi.co.jp/scc/products/mobile/as144l4/as144l4.htm (in Japanese) PR: kern/66144 Submitted by: KURASHINA Hideyuki <rushani@FreeBSD.org>
2004-05-02 13:21:28 +00:00
product SUNTAC AS144L4 0x0011 SUNTAC U-Cable type A4
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Sun Microsystems products */
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
product SUN2 KEYBOARD 0x0005 Type 6 USB keyboard
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* XXX The above is a North American PC style keyboard possibly */
86 new vendor ID's from USB.org, and 3 corrections of existing vendor ID's.
2004-08-19 19:21:14 +00:00
product SUN2 MOUSE 0x0100 Type 6 USB mouse
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
New entries (Mike Meyer)
2000-05-25 22:27:55 +00:00
/* Supra products */
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
product DIAMOND2 SUPRAEXPRESS56K 0x07da Supra Express 56K modem
product DIAMOND2 SUPRA2890 0x0b4a SupraMax 2890 56K Modem
product DIAMOND2 RIO600USB 0x5001 Rio 600 USB
* Correct a broken entry * Add the id for the Rio 800 USB. Submitted by: Wesley Morgan <morganw@chemikals.org>
2001-02-05 11:00:13 +00:00
product DIAMOND2 RIO800USB 0x5002 Rio 800 USB
TDK ids Submitted by: Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
2001-04-12 11:04:08 +00:00
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
/* System TALKS, Inc. */
product SYSTEMTALKS SGCX2UL 0x1920 SGC-X2UL
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
/* Taugagreining products */
product TAUGA CAMERAMATE 0x0005 CameraMate (DPCM_USB)
WARNING: white space diff This code reduces the number of trailing white space to be more in line w/ NetBSD. I don't regenerate usbdevs, saving that for when it really changes.
2003-07-04 01:50:39 +00:00
TDK ids Submitted by: Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
2001-04-12 11:04:08 +00:00
/* TDK products */
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product TDK UPA9664 0x0115 USB-PDC Adapter UPA9664
product TDK UCA1464 0x0116 USB-cdmaOne Adapter UCA1464
product TDK UHA6400 0x0117 USB-PHS Adapter UHA6400
product TDK UPA6400 0x0118 USB-PHS Adapter UPA6400
Add few new USB vendor/product IDs for Bluetooth USB devices. Regen. Reviewed by: imp (mentor) Approved by: imp (mentor)
2003-12-30 22:10:29 +00:00
product TDK BT_DONGLE 0x0309 Bluetooth USB dongle
TDK ids Submitted by: Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
2001-04-12 11:04:08 +00:00
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
/* TEAC products */
product TEAC FD05PUB 0x0000 FD-05PUB floppy
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Telex Communications products */
product TELEX MIC1 0x0001 Enhanced USB Microphone
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Texas Intel products */
product TI UTUSB41 0x1446 UT-USB41 hub
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product TI TUSB2046 0x2046 TUSB2046 hub
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Thrustmaster products */
product THRUST FUSION_PAD 0xa0a3 Fusion Digital Gamepad
Add the vendor and device IDs for a whole bunch of additional USB ethernet adapters that are supported by the aue and kue drivers. There are actually a couple more out there from Accton, Asante and EXP Computer, however I was not able to find any Windows device drivers for these on their servers, and hence could not harvest their vendor/device ID info. If somebody has one of these things and can look in the .inf file that comes with the Windows driver, I'd appreciate knowing what it says for 'VID' and 'PID.' Additional adapters include: the D-Link DSB-650 and DSB-650TX, the SMC 2102USB, 2104USB and 2202USB, the ATen UC10T, and the Netgear EA101. These are all mentioned in the man pages, relnotes and LINT. Also correct the date in the kue(4) man page. I wrote this thing on Jan, 4 2000, not 1999.
2000-01-07 22:18:49 +00:00
Added a few more entries. Submitted by: Lars Eggert <larse@ISI.EDU>
2003-07-11 21:17:29 +00:00
/* Toshiba Corporation products */
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product TOSHIBA POCKETPC_E740 0x0706 PocketPC e740
Added a few more entries. Submitted by: Lars Eggert <larse@ISI.EDU>
2003-07-11 21:17:29 +00:00
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
/* Trek Technology products */
product TREK THUMBDRIVE 0x1111 ThumbDrive
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
product TREK THUMBDRIVE_8MB 0x9988 ThumbDrive_8MB
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
Add support for the Trumpion/Comotron C3310 MP3 player.
2004-11-28 21:36:39 +00:00
/* Trumpion products */
product TRUMPION C3310 0x1100 Comotron C3310 MP3 player
Add support for the TwinMOS Memory Disk IV. PR: kern/73766 Submitted by: Valentin Nechayev MFC after: 1 week
2004-11-28 21:49:30 +00:00
/* TwinMOS */
product TWINMOS MDIV 0x1325 Memory Disk IV
Add Mustek, National and Ultima scanners. Submitted by: Henning Meier-Geinitz <hmg@gmx.de> PR: 29777 MFC after: 1 week
2001-08-21 21:35:40 +00:00
/* Ultima products */
product ULTIMA 1200UBPLUS 0x4002 1200 UB Plus scanner
New ids Submitted by: Scott Long PR: 18897
2000-08-06 23:26:58 +00:00
/* UMAX products */
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product UMAX ASTRA1236U 0x0002 Astra 1236U Scanner
product UMAX ASTRA1220U 0x0010 Astra 1220U Scanner
product UMAX ASTRA2000U 0x0030 Astra 2000U Scanner
product UMAX ASTRA2100U 0x0130 Astra 2100U Scanner
product UMAX ASTRA2200U 0x0230 Astra 2200U Scanner
Merge from NetBSD. Add lots of new scanner devices: AGFA SNAPSCAN1236U AGFA SNAPSCANE40 AGFA SNAPSCANE50 AGFA SNAPSCANE20 AGFA SNAPSCANE25 AGFA SNAPSCANE26 AGFA SNAPSCANE52 CANON N656U HP 3400CSE SCANLOGIC 336CX MUSTEK BEARPAW1200F MUSTEK 600USB MUSTEK 1200USBPLUS NATIONAL BEARPAW2400 EPSON 640U EPSON 1650 EPSON GT9700F UMAX ASTRA3400 ULTIMA 1200UBPLUS
2002-02-11 03:35:53 +00:00
product UMAX ASTRA3400 0x0060 Astra 3400 Scanner
New ids Submitted by: Scott Long PR: 18897
2000-08-06 23:26:58 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Universal Access products */
product UNIACCESS PANACHE 0x0101 Panache Surf USB ISDN Adapter
Add VidzMedia MonsterTV (MPEG video/TV capture box).
2003-09-24 02:02:41 +00:00
/* VidzMedia products */
product VIDZMEDIA MONSTERTV 0x4fb1 MonsterTV P2H
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Vision products */
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
product VISION VC6452V002 0x0002 CPiA Camera
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
/* Visioneer products */
Sync with NetBSD
2000-10-25 10:13:47 +00:00
product VISIONEER 7600 0x0211 OneTouch 7600
product VISIONEER 5300 0x0221 OneTouch 5300
Enable the HP 2200C and Visioneer Scanport 3000 scanners, and remove some trailing spaces whilst I'm here. Obtained from: NetBSD.
2002-07-31 09:05:52 +00:00
product VISIONEER 3000 0x0224 Scanport 3000
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product VISIONEER 6100 0x0231 OneTouch 6100
Sync with NetBSD
2000-10-25 10:13:47 +00:00
product VISIONEER 6200 0x0311 OneTouch 6200
product VISIONEER 8100 0x0321 OneTouch 8100
product VISIONEER 8600 0x0331 OneTouch 8600
WARNING: white space diff This code reduces the number of trailing white space to be more in line w/ NetBSD. I don't regenerate usbdevs, saving that for when it really changes.
2003-07-04 01:50:39 +00:00
Add support for the Vodafone Mobile Connect 3G datacard.
2004-10-16 21:27:28 +00:00
/* Vodafone products */
product VODAFONE MC3G 0x5000 Mobile Connect 3G datacard
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Wacom products */
product WACOM CT0405U 0x0000 CT-0405-U Tablet
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product WACOM GRAPHIRE 0x0010 Graphire
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product WACOM GRAPHIRE3 0x0013 Graphire 3
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product WACOM INTUOSA5 0x0021 Intuos A5
Added some new devices and made slight changes to some existing ones. Submitted by: Andre Guibert de Bruet <andy@siliconlandmark.com>
2003-06-25 22:50:57 +00:00
product WACOM GD0912U 0x0022 Intuos 9x12 Graphics Tablet
WARNING: white space diff This code reduces the number of trailing white space to be more in line w/ NetBSD. I don't regenerate usbdevs, saving that for when it really changes.
2003-07-04 01:50:39 +00:00
Add support Western Digital External USB HDD ONSPEC entry are sorted PR: kern/71031 Submitted by: Johann Hugo <jhugo@icomtek.csir.co.za> MFC after: 1 week
2004-09-04 07:07:35 +00:00
/* Western Digital products */
product WESTERN EXTHDD 0x0400 External HDD
product WESTERN HUB 0x0500 USB HUB
Move WINBOND 4 port hub to its proper location in the file. It belongs in a section of its own, not arbitrarily grouped in the hawking section just because hawking sells it...
2004-12-29 06:21:41 +00:00
/* Windbond Electronics */
product WINBOND UH104 0x5518 4-port USB Hub
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
/* Xirlink products */
product XIRLINK PCCAM 0x8080 IBM PC Camera
Add Y-E Data floppy drive.
2000-03-15 21:53:09 +00:00
/* Y-E Data products */
product YEDATA FLASHBUSTERU 0x0000 Flashbuster-U
Add some ids from NetBSD.
2001-02-05 11:02:50 +00:00
/* Yamaha products */
product YAMAHA UX256 0x1000 UX256 MIDI I/F
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product YAMAHA UX96 0x1008 UX96 MIDI I/F
product YAMAHA RTA54I 0x4000 NetVolante RTA54i Broadband&ISDN Router
Oops, this one isn't ready back it out until fixed
2004-12-20 21:17:22 +00:00
product YAMAHA RTA55I 0x4004 NetVolante RTA55i Broadband VoIP Router
Merge in a bunch of USB device and manufacturer definitions.. Submitted by: barry bouwsma (freebsd-misuser@NOSPAM.dyndns.dk) Obtained from: Dragonfly MFC after: 3 days
2004-12-20 20:10:57 +00:00
product YAMAHA RTW65B 0x4001 NetVolante RTW65b Broadband Wireless Router
product YAMAHA RTW65I 0x4002 NetVolante RTW65i Broadband&ISDN Wireless Router
Add some ids from NetBSD.
2001-02-05 11:02:50 +00:00
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
/* Yano products */
product YANO U640MO 0x0101 U640MO-03
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* Zoom Telephonics, Inc. products */
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product ZOOM 2986L 0x9700 2986L Fax modem
Zyxel keyboard Id
2000-10-07 11:01:54 +00:00
/* ZyXEL Communication Co. products */
Add the Omni 56K Plus modem Submitted by: kazarov@izmiran.rssi.ru
2001-04-09 18:19:20 +00:00
product ZYXEL OMNI56K 0x1500 Omni 56K Plus
Zyxel keyboard Id
2000-10-07 11:01:54 +00:00
product ZYXEL 980N 0x2011 Scorpion-980N keyboard
Reference in New Issue Copy Permalink