d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d9c4cd2fbc
freebsd-skq/sys/conf/files.powerpc

257 lines
11 KiB
Plaintext
Raw Normal View History

The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
# This file tells config what files go into building a kernel,
# files marked standard are always included.
#
# $FreeBSD$
#
# The long compile-with and dependency lines are required because of
# limitations in config: backslash-newline doesn't work in strings, and
# dependency lines other than the first are silently ignored.
#
#
Align.
2007-10-25 14:16:07 +00:00
font.h optional sc \
Sort.
2007-12-14 23:47:39 +00:00
compile-with "uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x16.fnt && file2c 'u_char dflt_font_16[16*256] = {' '};' < ${SC_DFLT_FONT}-8x16 > font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x14.fnt && file2c 'u_char dflt_font_14[14*256] = {' '};' < ${SC_DFLT_FONT}-8x14 >> font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x8.fnt && file2c 'u_char dflt_font_8[8*256] = {' '};' < ${SC_DFLT_FONT}-8x8 >> font.h" \
Add syscons files, and also generate a syscons font since Apple SVGA adapters don't have one available in their ROMs.
2004-01-21 05:19:59 +00:00
no-obj no-implicit-rule before-depend \
clean "font.h ${SC_DFLT_FONT}-8x14 ${SC_DFLT_FONT}-8x16 ${SC_DFLT_FONT}-8x8"
add glue for ath_hal MFC after: 1 month
2006-06-08 23:38:01 +00:00
#
Allow (with a license warning) "options ZFS" to work in static kernels. The 'make depend' rules have to use custom -I paths for the special compat includes for the opensolaris/zfs headers. This option will pull in the couple of files that are shared with dtrace, but they appear to correctly use the MODULE_VERSION/MODULE_DEPEND rules so loader should do the right thing, as should kldload. Reviewed by: pjd (glanced at)
2012-03-27 21:23:56 +00:00
# There is only an asm version on ppc64.
Allow DTrace to be compiled-in to the kernel. This will require for AArch64 as we dont have modules yet. Sponsored by: HEIF5 Sponsored by: ARM Ltd. Differential Revision: https://reviews.freebsd.org/D1997
2015-06-10 15:53:39 +00:00
cddl/compat/opensolaris/kern/opensolaris_atomic.c optional zfs powerpc | dtrace powerpc compile-with "${ZFS_C}"
cddl/contrib/opensolaris/common/atomic/powerpc64/opensolaris_atomic.S optional zfs powerpc64 | dtrace powerpc64 compile-with "${ZFS_S}"
cddl/dev/dtrace/powerpc/dtrace_asm.S optional dtrace compile-with "${DTRACE_S}"
cddl/dev/dtrace/powerpc/dtrace_subr.c optional dtrace compile-with "${DTRACE_C}"
cddl/dev/fbt/powerpc/fbt_isa.c optional dtrace_fbt | dtraceall compile-with "${FBT_C}"
Sort.
2007-12-14 23:47:39 +00:00
crypto/blowfish/bf_enc.c optional crypto | ipsec
- Trim an unused and bogus Makefile for mount_smbfs. - Reconnect with some minor modifications, in particular now selsocket() internals are adapted to use sbintime units after recent'ish calloutng switch.
2013-06-28 21:00:08 +00:00
crypto/des/des_enc.c optional crypto | ipsec | netsmb
Add support for the Apple Big Mac (BMAC) Ethernet controller, found on various Apple G3 models. Submitted by: Nathan Whitehorn
2008-06-07 22:58:32 +00:00
dev/bm/if_bm.c optional bm powermac
Add ADB support. This provides support for the external ADB bus on the PowerMac G3 as well as the internal ADB keyboard and mice in PowerBooks and iBooks. This also brings in Mac GPIO support, for which we should eventually have a better interface. Obtained from: NetBSD (CUDA and PMU drivers)
2008-10-26 19:37:38 +00:00
dev/adb/adb_bus.c optional adb
dev/adb/adb_kbd.c optional adb
dev/adb/adb_mouse.c optional adb
dev/adb/adb_hb_if.m optional adb
dev/adb/adb_if.m optional adb
Add support for special keys (volume/brightness/eject) on Apple laptops with ADB keyboards. Submitted by: Justin Hibbits <jrh29 at alumni dot cwru dot edu> MFC after: 9.0-RELEASE
2011-10-16 21:01:42 +00:00
dev/adb/adb_buttons.c optional adb
Add a driver for the Apple Uninorth AGP host bridge found in all PowerPC Macintoshes with an AGP bus.
2010-10-31 18:27:05 +00:00
dev/agp/agp_apple.c optional agp powermac
Add syscons files, and also generate a syscons font since Apple SVGA adapters don't have one available in their ROMs.
2004-01-21 05:19:59 +00:00
dev/fb/fb.c optional sc
Convert Freescale PowerPC platforms to FDT convention. The following systems are affected: - MPC8555CDS - MPC8572DS This overhaul covers the following major changes: - All integrated peripherals drivers for Freescale MPC85XX SoC, which are currently in the FreeBSD source tree are reworked and adjusted so they derive config data out of the device tree blob (instead of hard coded / tabelarized values). - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC, QUICC, UART, CFI. - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire ocpbus(4) driver, which was based on hard-coded config data. Note that world for these platforms has to be built WITH_FDT. Reviewed by: imp Sponsored by: The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
dev/fdt/fdt_powerpc.c optional fdt
Make simplebus a base class of ofwbus. This allows the elimination of duplicated code in the two classes, and also allows devices in FDT-based systems to declare simplebus as their parent and still work correctly when the FDT data describes the device at the root of the tree rather than as a child of a simplebus (which is common for interrupt, clock, and power controllers). Differential Revision: https://reviews.freebsd.org/D1990 Submitted by: Michal Meloun
2015-03-27 23:10:15 +00:00
# ofwbus depends on simplebus.
dev/fdt/simplebus.c optional aim | fdt
Implement hwpmc(4) for Freescale e500 core. This supports e500v1, e500v2, and e500mc. Tested only on e500v2, but the performance counters are identical across all, with e500mc having some additional events. Relnotes: Yes
2015-04-18 21:39:17 +00:00
dev/hwpmc/hwpmc_e500.c optional hwpmc
Fix build.
2013-09-05 13:53:25 +00:00
dev/hwpmc/hwpmc_mpc7xxx.c optional hwpmc
Implement hwpmc(4) for Freescale e500 core. This supports e500v1, e500v2, and e500mc. Tested only on e500v2, but the performance counters are identical across all, with e500mc having some additional events. Relnotes: Yes
2015-04-18 21:39:17 +00:00
dev/hwpmc/hwpmc_powerpc.c optional hwpmc
Add hwpmc(4) support for the PowerPC 970 class processors, direct events. This also fixes asserts on removal of the module for the mpc74xx. The PowerPC 970 processors have two different types of events: direct events and indirect events. Thus far only direct events are supported. I included some documentation in the driver on how indirect events work, but support is for the future. MFC after: 1 month
2014-02-01 02:03:50 +00:00
dev/hwpmc/hwpmc_ppc970.c optional hwpmc
Add a new driver, the ad7417, to read temperatures and voltages on some PowerMac's. Approved by: nwhitehorn (mentor)
2011-05-29 14:25:42 +00:00
dev/iicbus/ad7417.c optional ad7417 powermac
Fix whitespace.
2015-04-04 06:24:03 +00:00
dev/iicbus/adm1030.c optional powermac windtunnel | adm1030 powermac
Add driver for the ADT7460/ADT7467 fan controller found in later PowerBooks and iBooks. Original work by andreast. MFC after: 1 month
2014-02-03 01:22:50 +00:00
dev/iicbus/adt746x.c optional adt746x powermac
Add a new temperature driver for certain PowerMacs. Found here on my Quad G5.
2012-08-19 19:37:14 +00:00
dev/iicbus/ds1631.c optional ds1631 powermac
Add three new drivers for fan control and temperature reading on the PowerMac7,2. - The fcu driver lets us read and write the fan RPMs for all fans in the PowerMac7,2. This driver is PowerMac specific. - The ds1775 is a driver to read the temperature for the drive bay sensor. - The max6690 is another driver to read temperatures. Here it is used to read the inlet, the backside and the U3 heatsink temperature. An additional driver, the ad7417, will follow later. Thanks to nwhitehorn for guiding me through this driver development. Approved by: nwhitehorn (mentor)
2010-10-15 20:08:16 +00:00
dev/iicbus/ds1775.c optional ds1775 powermac
dev/iicbus/max6690.c optional max6690 powermac
Move the OFW iicbus code to dev/iicbus to stop polluting dev/ofw with unrelated code. Discussed with: nwhitehorn (a long time ago)
2016-05-24 01:33:49 +00:00
dev/iicbus/ofw_iicbus.c optional iicbus aim
Add a driver for the Freescale FCM module in the localbus controller. This driver does not yet handle multiple chip selects properly. Note that the NAND infrastructure does not perform full page reads or writes, which means that this driver cannot make use of the hardware ECC that is otherwise present.
2012-07-03 01:00:29 +00:00
dev/nand/nfc_fsl.c optional nand mpc85xx
Implement a driver for the PowerPC-base RouterBoard (RB333/600/800/1100) Summary: This has been tested on the RB800, but should work on the RB333, RB600, and RB1100 as well. It's currently missing ECC support, but read and write are complete. Reviewers: imp Reviewed By: imp Subscribers: imp Differential Revision: https://reviews.freebsd.org/D2223
2015-05-04 20:36:00 +00:00
dev/nand/nfc_rb.c optional nand mpc85xx
Move common fdt into files. Duplicate in files.powerpc the files shared with aim. Config is smart enough to cope with multiple lines of the same path with different options. This reduces the needless duplication.
2012-10-24 16:53:02 +00:00
# ofw can be either aim or fdt: fdt case handled in files. aim only powerpc specific.
dev/ofw/openfirm.c optional aim
dev/ofw/openfirmio.c optional aim
dev/ofw/ofw_bus_if.m optional aim
Move ofw_cpu.c to sys/dev/ofw so that it can be used by other architectures. Differential Revision: https://reviews.freebsd.org/D1307 Reviewed by: jhibbits
2014-12-14 22:41:08 +00:00
dev/ofw/ofw_cpu.c optional aim
Move common fdt into files. Duplicate in files.powerpc the files shared with aim. Config is smart enough to cope with multiple lines of the same path with different options. This reduces the needless duplication.
2012-10-24 16:53:02 +00:00
dev/ofw/ofw_if.m optional aim
dev/ofw/ofw_bus_subr.c optional aim
Make files under src/sys/powerpc/aim, as well as Open Firmware related files dependent upon option/cpu AIM. This is in preparation of adding support for Book-E (e500) support. Obtained from: Juniper, Semihalf
2007-12-16 01:02:47 +00:00
dev/ofw/ofw_console.c optional aim
dev/ofw/ofw_disk.c optional ofwd aim
Move Open Firmware device root on PowerPC, ARM, and MIPS systems to a sub-node of nexus (ofwbus) rather than direct attach under nexus. This fixes FDT on x86 and will make coexistence with ACPI on ARM systems easier. SPARC is unchanged. Reviewed by: imp, ian
2014-02-05 14:44:22 +00:00
dev/ofw/ofwbus.c optional aim | fdt
Fix PowerPC LINT build after r297392 PowerPC has real Open Firmware and does not necessarily need FDT. Make ofwpci.c only PCI dependent. Pointed out by: emaste Reviewed by: nwhitehorn Obtained from: Semihalf
2016-04-01 09:07:18 +00:00
dev/ofw/ofwpci.c optional pci
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
dev/ofw/ofw_standard.c optional aim powerpc
Implement OF_decode_addr() for arm. Move most of powerpc's implementation into a new function that other platforms can share. This creates a new ofw_reg_to_paddr() function (in a new ofw_subr.c file) that contains most of the existing ppc implementation, mostly unchanged. The ppc code now calls the new MI code from the MD code, then creates a ppc-specific bus_space mapping from the results. The new arm implementation does the same in an arm-specific way. This also moves the declaration of OF_decode_addr() from ofw_machdep.h to openfirm.h, except on sparc64 which uses a different function signature. This will help all FDT platforms to set up early console access using OF_decode_addr().
2015-12-21 18:07:32 +00:00
dev/ofw/ofw_subr.c optional aim powerpc
Sort.
2007-12-14 23:47:39 +00:00
dev/powermac_nvram/powermac_nvram.c optional powermac_nvram powermac
Convert Freescale PowerPC platforms to FDT convention. The following systems are affected: - MPC8555CDS - MPC8572DS This overhaul covers the following major changes: - All integrated peripherals drivers for Freescale MPC85XX SoC, which are currently in the FreeBSD source tree are reworked and adjusted so they derive config data out of the device tree blob (instead of hard coded / tabelarized values). - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC, QUICC, UART, CFI. - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire ocpbus(4) driver, which was based on hard-coded config data. Note that world for these platforms has to be built WITH_FDT. Reviewed by: imp Sponsored by: The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
dev/quicc/quicc_bfe_fdt.c optional quicc mpc85xx
Sort.
2007-12-14 23:47:39 +00:00
dev/scc/scc_bfe_macio.c optional scc powermac
Initial version of the sec(4) driver for the integrated security engine found in Freescale system-on-chip devices. The following algorithms and schemes are currently supported: - 3DES, AES, DES - MD5, SHA1, SHA256, SHA384, SHA512 Reviewed by: philip Obtained from: Freescale, Semihalf
2009-06-06 09:37:55 +00:00
dev/sec/sec.c optional sec mpc85xx
Add support for the I2S and davbus audio controllers found in Apple PowerPC hardware. Submitted by: Marco Trillo
2009-01-25 18:20:15 +00:00
dev/sound/macio/aoa.c optional snd_davbus | snd_ai2s powermac
dev/sound/macio/davbus.c optional snd_davbus powermac
dev/sound/macio/i2s.c optional snd_ai2s powermac
Add a new sound driver for PowerMacs, found here on my Quad G5. It allows simple playback and volume control like the other Mac drivers, not more.
2012-08-19 19:40:33 +00:00
dev/sound/macio/onyx.c optional snd_ai2s iicbus powermac
Add support for the I2S and davbus audio controllers found in Apple PowerPC hardware. Submitted by: Marco Trillo
2009-01-25 18:20:15 +00:00
dev/sound/macio/snapper.c optional snd_ai2s iicbus powermac
dev/sound/macio/tumbler.c optional snd_ai2s iicbus powermac
Add syscons files, and also generate a syscons font since Apple SVGA adapters don't have one available in their ROMs.
2004-01-21 05:19:59 +00:00
dev/syscons/scgfbrndr.c optional sc
Replace syscons terminal renderer by a new renderer that uses libteken. Some time ago I started working on a library called libteken, which is terminal emulator. It does not buffer any screen contents, but only keeps terminal state, such as cursor position, attributes, etc. It should implement all escape sequences that are implemented by the cons25 terminal emulator, but also a fair amount of sequences that are present in VT100 and xterm. A lot of random notes, which could be of interest to users/developers: - Even though I'm leaving the terminal type set to `cons25', users can do experiments with placing `xterm-color' in /etc/ttys. Because we only implement a subset of features of xterm, this may cause artifacts. We should consider extending libteken, because in my opinion xterm is the way to go. Some missing features: - Keypad application mode (DECKPAM) - Character sets (SCS) - libteken is filled with a fair amount of assertions, but unfortunately we cannot go into the debugger anymore if we fail them. I've done development of this library almost entirely in userspace. In sys/dev/syscons/teken there are two applications that can be helpful when debugging the code: - teken_demo: a terminal emulator that can be started from a regular xterm that emulates a terminal using libteken. This application can be very useful to debug any rendering issues. - teken_stress: a stress testing application that emulates random terminal output. libteken has literally survived multiple terabytes of random input. - libteken also includes support for UTF-8, but unfortunately our input layer and font renderer don't support this. If users want to experiment with UTF-8 support, they can enable `TEKEN_UTF8' in teken.h. If you recompile your kernel or the teken_demo application, you can hold some nice experiments. - I've left PC98 the way it is right now. The PC98 platform has a custom syscons renderer, which supports some form of localised input. Maybe we should port PC98 to libteken by the time syscons supports UTF-8? - I've removed the `dumb' terminal emulator. It has been broken for years. It hasn't survived the `struct proc' -> `struct thread' conversion. - To prevent confusion among people that want to hack on libteken: unlike syscons, the state machines that parse the escape sequences are machine generated. This means that if you want to add new escape sequences, you have to add an entry to the `sequences' file. This will cause new entries to be added to `teken_state.h'. - Any rendering artifacts that didn't occur prior to this commit are by accident. They should be reported to me, so I can fix them. Discussed on: current@, hackers@ Discussed with: philip (at 25C3)
2009-01-01 13:26:53 +00:00
dev/syscons/scterm-teken.c optional sc
Add syscons files, and also generate a syscons font since Apple SVGA adapters don't have one available in their ROMs.
2004-01-21 05:19:59 +00:00
dev/syscons/scvtb.c optional sc
Connect MPC85XX to the PowerPC build. The kernel config file is KERNCONF=MPC85XX, so the usual procedure applies: 1. make buildworld TARGET_ARCH=powerpc 2. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX This default config uses kernel-level FPU emulation. For the soft-float world approach: 1. make buildworld TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 2. disable FPU_EMU option in sys/powerpc/conf/MPC85XX 3. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX Approved by: cognet (mentor) MFp4: e500
2008-03-03 20:40:20 +00:00
dev/tsec/if_tsec.c optional tsec
Convert Freescale PowerPC platforms to FDT convention. The following systems are affected: - MPC8555CDS - MPC8572DS This overhaul covers the following major changes: - All integrated peripherals drivers for Freescale MPC85XX SoC, which are currently in the FreeBSD source tree are reworked and adjusted so they derive config data out of the device tree blob (instead of hard coded / tabelarized values). - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC, QUICC, UART, CFI. - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire ocpbus(4) driver, which was based on hard-coded config data. Note that world for these platforms has to be built WITH_FDT. Reviewed by: imp Sponsored by: The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
dev/tsec/if_tsec_fdt.c optional tsec fdt
Make uart_cpu_powerpc work on both FDT and OFW systems. This is the last remaining modification required to build kernels that work with both on PowerPC.
2013-12-01 16:02:22 +00:00
dev/uart/uart_cpu_powerpc.c optional uart
Add support for new LAW registers in QorIQ SoCs. QorIQ SoCs (e5500 core, P5 family) have 2 BARs for local access windows, while MPC85XX, and P1/P2 families use only a single BAR register. This also adds the QORIQ_DPAA option, mutually exclusive to MPC85XX, to handle this difference. Obtained from: Semihalf Sponsored by: Alex Perez/Inertial Computing
2015-11-18 01:54:19 +00:00
dev/usb/controller/ehci_fsl.c optional ehci mpc85xx | ehci qoriq_dpaa
Merge VT(9) project (a.k.a. newcons). Reviewed by: nwhitehorn MFC_to_10_after: re approval Sponsored by: The FreeBSD Foundation
2013-12-05 22:38:53 +00:00
dev/vt/hw/ofwfb/ofwfb.c optional vt aim
Update PowerPC event timer code to use new event timers infrastructure. Reviewed by: nwitehorn Tested by: andreast H/W donated by: Gheorghe Ardelean
2010-09-11 04:45:51 +00:00
kern/kern_clocksource.c standard
Implement mechanism to export some kernel timekeeping data to usermode, using shared page. The structures and functions have vdso prefix, to indicate the intended location of the code in some future. The versioned per-algorithm data is exported in the format of struct vdso_timehands, which mostly repeats the content of in-kernel struct timehands. Usermode reading of the structure can be lockless. Compatibility export for 32bit processes on 64bit host is also provided. Kernel also provides usermode with indication about currently used timecounter, so that libc can fall back to syscall if configured timecounter is unknown to usermode code. The shared data updates are initiated both from the tc_windup(), where a fast task is queued to do the update, and from sysctl handlers which change timecounter. A manual override switch kern.timecounter.fast_gettime allows to turn off the mechanism. Only x86 architectures export the real algorithm data, and there, only for tsc timecounter. HPET counters page could be exported as well, but I prefer to not further glue the kernel and libc ABI there until proper vdso-based solution is developed. Minimal stubs neccessary for non-x86 architectures to still compile are provided. Discussed with: bde Reviewed by: jhb Tested by: flo MFC after: 1 month
2012-06-22 07:06:40 +00:00
kern/subr_dummy_vdso_tc.c standard
Fix build for non-WITNESS case spotted by: Suleiman Souhlal <refugee@segfaulted.com>
2004-07-11 01:38:25 +00:00
kern/syscalls.c optional ktr
Merge all MD sf_buf allocators into one MI, residing in kern/subr_sfbuf.c The MD allocators were very common, however there were some minor differencies. These differencies were all consolidated in the MI allocator, under ifdefs. The defines from machine/vmparam.h turn on features required for a particular machine. For details look in the comment in sys/sf_buf.h. As result no MD code left in sys/*/*/vm_machdep.c. Some arches still have machine/sf_buf.h, which is usually quite small. Tested by: glebius (i386), tuexen (arm32), kevlo (arm32) Reviewed by: kib Sponsored by: Netflix Sponsored by: Nginx, Inc.
2014-08-05 09:44:10 +00:00
kern/subr_sfbuf.c standard
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
libkern/ashldi3.c optional powerpc
libkern/ashrdi3.c optional powerpc
Sort.
2007-12-14 23:47:39 +00:00
libkern/bcmp.c standard
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
libkern/cmpdi2.c optional powerpc
libkern/divdi3.c optional powerpc
Sort.
2007-12-14 23:47:39 +00:00
libkern/ffs.c standard
libkern/ffsl.c standard
Add libkern ffsll() for parity with flsll() Sponsored by: EMC / Isilon Storage Division Differential Revision: https://reviews.freebsd.org/D3962
2015-10-22 20:28:37 +00:00
libkern/ffsll.c standard
Sort.
2007-12-14 23:47:39 +00:00
libkern/fls.c standard
libkern/flsl.c standard
provide fast versions of ffsl and flsl for i386; ffsll and flsll for amd64 Reviewed by: jhb MFC after: 10 days X-MFC note: consider thirdparty modules depending on these symbols Sponsored by: HybridCluster
2014-02-14 15:18:37 +00:00
libkern/flsll.c standard
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
libkern/lshrdi3.c optional powerpc
Add memmove() to the kernel, making the kernel compile with Clang. When copying big structures, LLVM generates calls to memmove(), because it may not be able to figure out whether structures overlap. This caused linker errors to occur. memmove() is now implemented using bcopy(). Ideally it would be the other way around, but that can be solved in the future. On ARM we don't do add anything, because it already has memmove(). Discussed on: arch@ Reviewed by: rdivacky
2009-02-28 16:21:25 +00:00
libkern/memmove.c standard
Sort.
2007-12-14 23:47:39 +00:00
libkern/memset.c standard
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
libkern/moddi3.c optional powerpc
libkern/qdivrem.c optional powerpc
libkern/ucmpdi2.c optional powerpc
libkern/udivdi3.c optional powerpc
libkern/umoddi3.c optional powerpc
Make files under src/sys/powerpc/aim, as well as Open Firmware related files dependent upon option/cpu AIM. This is in preparation of adding support for Book-E (e500) support. Obtained from: Juniper, Semihalf
2007-12-16 01:02:47 +00:00
powerpc/aim/locore.S optional aim no-obj
Also happened to miss this in r282264.
2015-04-30 04:44:41 +00:00
powerpc/aim/aim_machdep.c optional aim
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
powerpc/aim/mmu_oea.c optional aim powerpc
Add support for 64-bit PowerPC CPUs operating in the 64-bit bridge mode provided, for example, on the PowerPC 970 (G5), as well as on related CPUs like the POWER3 and POWER4. This also adds support for various built-in hardware found on Apple G5 hardware (e.g. the IBM CPC925 northbridge). Reviewed by: grehan
2009-04-04 00:22:44 +00:00
powerpc/aim/mmu_oea64.c optional aim
Add an abstraction layer to the 64-bit AIM MMU's page table manipulation logic to support modifying the page table through a hypervisor. This uses KOBJ inheritance to provide subclasses of the base 64-bit AIM MMU class with additional methods for page table manipulation. Many thanks to Peter Grehan for suggesting this design and implementing the MMU KOBJ inheritance mechanism.
2010-12-04 02:42:52 +00:00
powerpc/aim/moea64_if.m optional aim
powerpc/aim/moea64_native.c optional aim
Unbreak non-SMP builds. This was broken by r259284. Also, reorganize the code introduced in that revision a bit. Reviewed by: nwhitehorn MFC after: 3 weeks
2014-01-31 03:55:34 +00:00
powerpc/aim/mp_cpudep.c optional aim
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
powerpc/aim/slb.c optional aim powerpc64
Let us manage differences of Book-E PowerPC variations i.e. vendor / implementation specific vs. the common architecture definition. Bring PPC4XX defines (PSL, SPR, TLB). Note the new definitions under BOOKE_PPC4XX are not used in the code yet. This change set is not supposed to affect existing E500 support, it's just another reorg step before bringing support for E500mc, E5500 and PPC465. Obtained from: AppliedMicro, Freescale, Semihalf
2012-05-27 10:25:20 +00:00
powerpc/booke/locore.S optional booke no-obj
Also happened to miss this in r282264.
2015-04-30 04:44:41 +00:00
powerpc/booke/booke_machdep.c optional booke
Extract vendor specific Book-E pieces into separate files and have a common skeleton (maybe we should kobj-tize this one day). Note the PPC4xx bit is not connected to the build yet. Obtained from: AppliedMicro, Semihalf.
2012-05-30 17:34:40 +00:00
powerpc/booke/machdep_e500.c optional booke_e500
Let us manage differences of Book-E PowerPC variations i.e. vendor / implementation specific vs. the common architecture definition. Bring PPC4XX defines (PSL, SPR, TLB). Note the new definitions under BOOKE_PPC4XX are not used in the code yet. This change set is not supposed to affect existing E500 support, it's just another reorg step before bringing support for E500mc, E5500 and PPC465. Obtained from: AppliedMicro, Freescale, Semihalf
2012-05-27 10:25:20 +00:00
powerpc/booke/mp_cpudep.c optional booke smp
Rename the "bare" platform "mpc85xx", which is what it actually is, and add actual platform probing based on PVR. Still needs a little more work: in particular, the CCRS setup should move here. Also turn "bare" into a truly bare platform that doesn't pretend to know how to do anything except get the memory map. This should also be enhanced to process the FDT reserved memory list, but that is for another day.
2013-11-11 16:14:25 +00:00
powerpc/booke/platform_bare.c optional booke
Let us manage differences of Book-E PowerPC variations i.e. vendor / implementation specific vs. the common architecture definition. Bring PPC4XX defines (PSL, SPR, TLB). Note the new definitions under BOOKE_PPC4XX are not used in the code yet. This change set is not supposed to affect existing E500 support, it's just another reorg step before bringing support for E500mc, E5500 and PPC465. Obtained from: AppliedMicro, Freescale, Semihalf
2012-05-27 10:25:20 +00:00
powerpc/booke/pmap.c optional booke
Introduce support for cpufreq on PowerPC with the dynamic frequency switching capabilities of the MPC7447A and MPC7448.
2009-05-31 09:01:23 +00:00
powerpc/cpufreq/dfs.c optional cpufreq
Add cpufreq support on the PowerPC G5, along with a skeleton SMU driver in order to slew CPU voltage during frequency changes. The OpenBSD SMU driver was an extremely helpful reference for this.
2009-06-23 04:28:32 +00:00
powerpc/cpufreq/pcr.c optional cpufreq aim
Add PMU-based CPU frequency scaling. This method is used on most Titanium PowerBooks. MFC after: 1 month
2013-12-13 02:37:35 +00:00
powerpc/cpufreq/pmufreq.c optional cpufreq aim pmu
Fix debug printfs in FPU_EMU to compile on powerpc64 and enable it for powerpc64. This fixes the LINT64 kernel config. Approved by: nwhitehorn (the idea, not the actual patch)
2013-12-05 21:49:14 +00:00
powerpc/fpu/fpu_add.c optional fpu_emu
powerpc/fpu/fpu_compare.c optional fpu_emu
powerpc/fpu/fpu_div.c optional fpu_emu
powerpc/fpu/fpu_emu.c optional fpu_emu
powerpc/fpu/fpu_explode.c optional fpu_emu
powerpc/fpu/fpu_implode.c optional fpu_emu
powerpc/fpu/fpu_mul.c optional fpu_emu
powerpc/fpu/fpu_sqrt.c optional fpu_emu
powerpc/fpu/fpu_subr.c optional fpu_emu
Add support for the IBM Full-System Simulator (Mambo). This code has been developed against the 970 and Cell simulators.
2010-07-31 13:22:34 +00:00
powerpc/mambo/mambocall.S optional mambo
powerpc/mambo/mambo.c optional mambo
powerpc/mambo/mambo_console.c optional mambo
powerpc/mambo/mambo_disk.c optional mambo
Create a RouterBoard platform and use it to create a flash map Summary: The RouterBoard uses a predefined partition map which doesn't exist in the fdt. This change allows overriding the fdt slicer with a custom slicer, and uses this custom slicer to define the flash map on the RouterBoard RB800. D3305 converts the mpc85xx platform into a base class, so that systems based on the mpc85xx platform can add their own overrides. This change builds on D3305, and creates a RouterBoard (RB800) platform to initialize the slicer override. Reviewed By: nwhitehorn, imp Differential Revision: https://reviews.freebsd.org/D3345
2015-08-22 05:50:18 +00:00
powerpc/mikrotik/platform_rb.c optional mikrotik
Add suppport for ISA and ISA interrupts to make the ATA controller in the VIA southbridge functional in the CDS (Configurable Development System) for MPC85XX. The embedded USB controllers look operational but the interrupt steering is still wrong.
2009-04-24 03:51:11 +00:00
powerpc/mpc85xx/atpic.c optional mpc85xx isa
Convert Freescale PowerPC platforms to FDT convention. The following systems are affected: - MPC8555CDS - MPC8572DS This overhaul covers the following major changes: - All integrated peripherals drivers for Freescale MPC85XX SoC, which are currently in the FreeBSD source tree are reworked and adjusted so they derive config data out of the device tree blob (instead of hard coded / tabelarized values). - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC, QUICC, UART, CFI. - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire ocpbus(4) driver, which was based on hard-coded config data. Note that world for these platforms has to be built WITH_FDT. Reviewed by: imp Sponsored by: The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
powerpc/mpc85xx/ds1553_bus_fdt.c optional ds1553 fdt
DS1553 RTC module driver. On the MPC8555CDS system it hangs off of the LBC bus. Obtained from: Semihalf
2009-06-22 15:48:47 +00:00
powerpc/mpc85xx/ds1553_core.c optional ds1553
Add support for new LAW registers in QorIQ SoCs. QorIQ SoCs (e5500 core, P5 family) have 2 BARs for local access windows, while MPC85XX, and P1/P2 families use only a single BAR register. This also adds the QORIQ_DPAA option, mutually exclusive to MPC85XX, to handle this difference. Obtained from: Semihalf Sponsored by: Alex Perez/Inertial Computing
2015-11-18 01:54:19 +00:00
powerpc/mpc85xx/fsl_sdhc.c optional mpc85xx sdhc | qoriq_dpaa sdhc
Convert Freescale PowerPC platforms to FDT convention. The following systems are affected: - MPC8555CDS - MPC8572DS This overhaul covers the following major changes: - All integrated peripherals drivers for Freescale MPC85XX SoC, which are currently in the FreeBSD source tree are reworked and adjusted so they derive config data out of the device tree blob (instead of hard coded / tabelarized values). - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC, QUICC, UART, CFI. - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire ocpbus(4) driver, which was based on hard-coded config data. Note that world for these platforms has to be built WITH_FDT. Reviewed by: imp Sponsored by: The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
powerpc/mpc85xx/i2c.c optional iicbus fdt
Keep file list sorted.
2009-06-22 15:53:41 +00:00
powerpc/mpc85xx/isa.c optional mpc85xx isa
Add support for new LAW registers in QorIQ SoCs. QorIQ SoCs (e5500 core, P5 family) have 2 BARs for local access windows, while MPC85XX, and P1/P2 families use only a single BAR register. This also adds the QORIQ_DPAA option, mutually exclusive to MPC85XX, to handle this difference. Obtained from: Semihalf Sponsored by: Alex Perez/Inertial Computing
2015-11-18 01:54:19 +00:00
powerpc/mpc85xx/lbc.c optional mpc85xx | qoriq_dpaa
powerpc/mpc85xx/mpc85xx.c optional mpc85xx | qoriq_dpaa
Add mpc85xx_gpio to the build conf. Missed this in the previous commit.
2015-04-04 06:22:14 +00:00
powerpc/mpc85xx/mpc85xx_gpio.c optional mpc85xx gpio
Add support for new LAW registers in QorIQ SoCs. QorIQ SoCs (e5500 core, P5 family) have 2 BARs for local access windows, while MPC85XX, and P1/P2 families use only a single BAR register. This also adds the QORIQ_DPAA option, mutually exclusive to MPC85XX, to handle this difference. Obtained from: Semihalf Sponsored by: Alex Perez/Inertial Computing
2015-11-18 01:54:19 +00:00
powerpc/mpc85xx/platform_mpc85xx.c optional mpc85xx | qoriq_dpaa
powerpc/mpc85xx/pci_mpc85xx.c optional pci mpc85xx | pci qoriq_dpaa
powerpc/mpc85xx/pci_mpc85xx_pcib.c optional pci mpc85xx | pci qoriq_dpaa
Add Freescale QorIQ GPIO driver. Still missing interrupt support, to come later. Sponsored by: Alex Perez/Inertial Computing
2015-11-30 02:23:56 +00:00
powerpc/mpc85xx/qoriq_gpio.c optional mpc85xx gpio | qoriq_dpaa gpio
Make tsec work with the device tree present on the RB800. The previous code assumed that the MDIO bus was a direct child of the Ethernet interface. It may not be and indeed on many device trees is not. While here, add proper locking for MII transactions, which may be on a bus shared by several MACs. Hardware donated by: Benjamin Perrault
2013-11-11 15:43:21 +00:00
powerpc/ofw/ofw_machdep.c standard
Convert e500 PCI driver to use common PPC PCI bus glue. No functional changes.
2013-10-25 14:43:16 +00:00
powerpc/ofw/ofw_pcibus.c optional pci
powerpc/ofw/ofw_pcib_pci.c optional pci
Add an Open Firmware access module for real-mode OF accesses to the PowerPC build. This is required for the IBM Mambo simulator, as well as a variety of non-Apple PowerPC hardware.
2009-04-05 18:40:15 +00:00
powerpc/ofw/ofw_real.c optional aim
Make files under src/sys/powerpc/aim, as well as Open Firmware related files dependent upon option/cpu AIM. This is in preparation of adding support for Book-E (e500) support. Obtained from: Juniper, Semihalf
2007-12-16 01:02:47 +00:00
powerpc/ofw/ofw_syscons.c optional sc aim
Missed file in r222613.
2011-06-02 14:22:00 +00:00
powerpc/ofw/ofwcall32.S optional aim powerpc
powerpc/ofw/ofwcall64.S optional aim powerpc64
powerpc/ofw/ofwmagic.S optional aim
Standards-conformance and code deduplication: - Use bus reference phandles in place of FDT offsets as IRQ domain keys - Unify the identical macio/fdt/mambo OpenPIC drivers into one - Be more forgiving (following ePAPR) about what we need from the device tree to identify an OpenPIC - Correctly map all IRQs into an interrupt domain - Set IRQ_*_CONFORM for interrupts on an unknown PIC type instead of failing attachment for that device.
2013-10-22 14:07:57 +00:00
powerpc/ofw/openpic_ofw.c optional aim | fdt
Missed file in r222613.
2011-06-02 14:22:00 +00:00
powerpc/ofw/rtas.c optional aim
Modularize the Macintosh built-in ATA along the lines of the rest of the ATA system as an optional atamacio device. PR: powerpc/133161 Submitted by: Bruce Cran
2009-04-04 17:05:17 +00:00
powerpc/powermac/ata_kauai.c optional powermac ata | powermac atamacio
powerpc/powermac/ata_macio.c optional powermac ata | powermac atamacio
powerpc/powermac/ata_dbdma.c optional powermac ata | powermac atamacio
Add backlight control to ATI-graphics PowerBooks and iBooks. Approved by: nwhitehorn (mentor) MFC after: 1 week
2012-02-26 13:45:25 +00:00
powerpc/powermac/atibl.c optional powermac atibl
Add cpufreq support on the PowerPC G5, along with a skeleton SMU driver in order to slew CPU voltage during frequency changes. The OpenBSD SMU driver was an extremely helpful reference for this.
2009-06-23 04:28:32 +00:00
powerpc/powermac/cuda.c optional powermac cuda
powerpc/powermac/cpcht.c optional powermac pci
Add support for Apple's Descriptor-Based DMA (DBDMA) engine. The DMA engine is usful to various existing drivers, such as ata(4) and scc(4), and is used bhy the soon to be added bm(4). Submitted by: Nathan Whitehorn
2008-06-07 21:56:48 +00:00
powerpc/powermac/dbdma.c optional powermac pci
Add three new drivers for fan control and temperature reading on the PowerMac7,2. - The fcu driver lets us read and write the fan RPMs for all fans in the PowerMac7,2. This driver is PowerMac specific. - The ds1775 is a driver to read the temperature for the drive bay sensor. - The max6690 is another driver to read temperatures. Here it is used to read the inlet, the backside and the U3 heatsink temperature. An additional driver, the ad7417, will follow later. Thanks to nwhitehorn for guiding me through this driver development. Approved by: nwhitehorn (mentor)
2010-10-15 20:08:16 +00:00
powerpc/powermac/fcu.c optional powermac fcu
Sort.
2007-12-14 23:47:39 +00:00
powerpc/powermac/grackle.c optional powermac pci
powerpc/powermac/hrowpic.c optional powermac pci
Driver for Apple Keywest I2C controllers found in MacIO ASICs. Used for power and thermal control, as well as GPIOs on Xserves and controlling sound codecs for Apple built-in audio. Submitted by: Marco Trillo Obtained from: NetBSD
2009-01-15 02:52:31 +00:00
powerpc/powermac/kiic.c optional powermac kiic
Add cpufreq support on the PowerPC G5, along with a skeleton SMU driver in order to slew CPU voltage during frequency changes. The OpenBSD SMU driver was an extremely helpful reference for this.
2009-06-23 04:28:32 +00:00
powerpc/powermac/macgpio.c optional powermac pci
Sort.
2007-12-14 23:47:39 +00:00
powerpc/powermac/macio.c optional powermac pci
Add backlight support for nVidia-based PowerBooks/iBooks/iMacs. Approved by: nwhitehorn (mentor) MFC after: 9.1-RELEASE
2012-08-04 03:05:01 +00:00
powerpc/powermac/nvbl.c optional powermac nvbl
Restructure how reset and poweroff are handled on PowerPC systems, since the existing code was very platform specific, and broken for SMP systems trying to reboot from KDB. - Add a new PLATFORM_RESET() method to the platform KOBJ interface, and migrate existing reset functions into platform modules. - Modify the OF_reboot() routine to submit the request by hand to avoid the IPIs involved in the regular openfirmware() routine. This fixes reboot from KDB on SMP machines. - Move non-KDB reset and poweroff functions on the Powermac platform into the relevant power control drivers (cuda, pmu, smu), instead of using them through the Open Firmware backdoor. - Rename platform_chrp to platform_powermac since it has become increasingly Powermac specific. When we gain support for IBM systems, we will grow a new platform_chrp.
2010-08-31 15:27:46 +00:00
powerpc/powermac/platform_powermac.c optional powermac
Factor out the SMU fan management code into a new module (powermac_thermal) that will connect all of the various sensors and fan control modules on Apple hardware with software-controlled fans (e.g. all G5 systems). MFC after: 1 month
2011-05-28 21:13:22 +00:00
powerpc/powermac/powermac_thermal.c optional powermac
Sort.
2007-12-14 23:47:39 +00:00
powerpc/powermac/pswitch.c optional powermac pswitch
Add ADB support. This provides support for the external ADB bus on the PowerMac G3 as well as the internal ADB keyboard and mice in PowerBooks and iBooks. This also brings in Mac GPIO support, for which we should eventually have a better interface. Obtained from: NetBSD (CUDA and PMU drivers)
2008-10-26 19:37:38 +00:00
powerpc/powermac/pmu.c optional powermac pmu
Add cpufreq support on the PowerPC G5, along with a skeleton SMU driver in order to slew CPU voltage during frequency changes. The OpenBSD SMU driver was an extremely helpful reference for this.
2009-06-23 04:28:32 +00:00
powerpc/powermac/smu.c optional powermac smu
Add a driver for the CPU temperature sensors attached over I2C on the PowerMac 11,2.
2010-06-05 17:51:37 +00:00
powerpc/powermac/smusat.c optional powermac smu
Add support for the U4 PCI-Express bridge chipset used in late-generation Powermac G5 systems. MSI and several other things are not presently supported. The U3/U4 internal device support portions of this change were contributed by Andreas Tobler. MFC after: 1 week
2010-05-16 15:18:25 +00:00
powerpc/powermac/uninorth.c optional powermac
powerpc/powermac/uninorthpci.c optional powermac pci
Introduce support for cpufreq on PowerPC with the dynamic frequency switching capabilities of the MPC7447A and MPC7448.
2009-05-31 09:01:23 +00:00
powerpc/powermac/vcoregpio.c optional powermac
Split the function of the PCB_FPU flags into two: PCB_FPU now indicates that the actual FPU is enabled, while PCB_FPREGS indicates that the FPU state structure in the PCB is valid. This separation reflects the situation on FPU-less systems in which the FP state is used by the emulator but we don't actually want to try to turn on the non-existant FPU. Use this flag to save and restore FP regs properly on both AIM and Book-E. As a side effect, this sets up hard-FP and Altivec on Book-E CPUs with such abilities except for a trap handler to call enable_fpu()/enable_altivec().
2013-11-17 14:44:22 +00:00
powerpc/powerpc/altivec.c standard
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
powerpc/powerpc/autoconf.c standard
powerpc/powerpc/bcopy.c standard
Redefine bus_space_tag_t on PowerPC from a 32-bit integral to a pointer to struct bus_space. The structure contains function pointers that do the actual bus space access. The reason for this change is that previously all bus space accesses were little endian (i.e. had an explicit byte-swap for multi-byte accesses), because all busses on Macs are little endian. The upcoming support for Book E, and in particular the E500 core, requires support for big-endian busses because all embedded peripherals are in the native byte-order. With this change, there's no distinction between I/O port space and memory mapped I/O. PowerPC doesn't have I/O port space. Busses assign tags based on the byte-order only. For that purpose, two global structures exist (bs_be_tag and bs_le_tag), of which the address can be taken to get a valid tag. Obtained from: Juniper, Semihalf
2007-12-19 18:00:50 +00:00
powerpc/powerpc/bus_machdep.c standard
1) Add busdma machdep code. 2) Add bus_pio.h and bus_memio.h (which do nothing). Submitted by: Peter Grehan <peterg@ptree32.com.au> (1)
2002-07-09 12:47:14 +00:00
powerpc/powerpc/busdma_machdep.c standard
Replace the two almost-exactly-identical AIM and Book-E clock.c implementations with a single one after the application of a very small amount of #ifdef.
2013-10-20 16:37:03 +00:00
powerpc/powerpc/clock.c standard
Use the same implementation of copyinout.c for both AIM and Book-E. This fixes some bugs in both implementations related to validity checks on mapping bounds.
2013-11-11 23:37:16 +00:00
powerpc/powerpc/copyinout.c standard
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
powerpc/powerpc/copystr.c standard
Add cpu.c. This contains one exported function, cpu_setup(), which handles setup of and printing information about cpus. Obtained from: NetBSD (parts)
2003-02-05 12:09:53 +00:00
powerpc/powerpc/cpu.c standard
Sort.
2007-12-14 23:47:39 +00:00
powerpc/powerpc/db_disasm.c optional ddb
powerpc/powerpc/db_hwwatch.c optional ddb
powerpc/powerpc/db_interface.c optional ddb
powerpc/powerpc/db_trace.c optional ddb
PowerPC, meet kernel core dumps. The support is based on a generic dumper that creates an ELF core file and uses PMAP functions to scan and iterate over memory chunks, as well as handle memory mappings used during dumping. the PMAP layer can choose to return physical memory chunks or virtual memory chunks. For minidumps, the chunks should be virtual. The default MMU I/F implementation for the scan_md() method returns NULL. Thus, when a PMAP implementation does not implement the required methods, an empty core file is created. Here, empty means having an ELF header only. Obtained from: Juniper Networks
2009-04-04 02:12:37 +00:00
powerpc/powerpc/dump_machdep.c standard
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
powerpc/powerpc/elf32_machdep.c optional powerpc | compat_freebsd32
powerpc/powerpc/elf64_machdep.c optional powerpc64
Unify ABI-related bits of the Book-E and AIM machdep routines (exec_setregs, etc.) in order to simplify the addition of 64-bit support, and possible future extension of the Book-E code to handle hard floating point and Altivec. MFC after: 1 month
2010-07-12 16:08:07 +00:00
powerpc/powerpc/exec_machdep.c standard
Split the function of the PCB_FPU flags into two: PCB_FPU now indicates that the actual FPU is enabled, while PCB_FPREGS indicates that the FPU state structure in the PCB is valid. This separation reflects the situation on FPU-less systems in which the FP state is used by the emulator but we don't actually want to try to turn on the non-existant FPU. Use this flag to save and restore FP regs properly on both AIM and Book-E. As a side effect, this sets up hard-FP and Altivec on Book-E CPUs with such abilities except for a trap handler to call enable_fpu()/enable_altivec().
2013-11-17 14:44:22 +00:00
powerpc/powerpc/fpu.c standard
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
powerpc/powerpc/fuswintr.c standard
Add skeletal support for GDB. In particular gdb_cpu_getreg() needs implementing to make GDB support usable.
2006-08-24 21:52:11 +00:00
powerpc/powerpc/gdb_machdep.c optional gdb
Compile in in_cksum* implementations for both IPv6 and IPv6. While in_pseudo() etc. is often used in offloading feature support, in_cksum() is mostly used to fix some broken hardware. Keeping both around for the moment allows us to compile NIC drivers even in an IPv6 only environment without the need to mangle them with #ifdef INETs in a way they are not prepared for. This will leave some dead code paths that will not be exercised for IPv6. Reviewed by: gnn Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 3 days
2011-04-20 12:58:30 +00:00
powerpc/powerpc/in_cksum.c optional inet | inet6
Merge booke and aim interrupt.c files. Summary: Both booke and AIM interrupt.c files contain nearly identical code. This merges the two files, to reduce duplication. Reviewers: #powerpc, marcel Reviewed By: marcel Subscribers: imp Differential Revision: https://reviews.freebsd.org/D2991
2015-07-06 05:08:57 +00:00
powerpc/powerpc/interrupt.c standard
Add interrupt handling support code. I've tried to make this fairly platform-independant as some PowerPC platforms may not have openpic-style interrupt controllers. This may not have the best performance but it works for now.
2002-07-09 11:12:20 +00:00
powerpc/powerpc/intr_machdep.c standard
Provide a simple IOMMU framework on PowerPC, which is required to support PPC hypervisors.
2010-12-03 16:37:37 +00:00
powerpc/powerpc/iommu_if.m standard
Also happened to miss this in r282264.
2015-04-30 04:44:41 +00:00
powerpc/powerpc/machdep.c standard
Sort.
2007-12-14 23:47:39 +00:00
powerpc/powerpc/mem.c optional mem
Insert a layer of indirection to the pmap code, using a kobj for the interface. This allows run-time selection of MMU code, based on CPU-type detection, or tunable-overrides when testing new code. Pre-requisite for G5 support. conf/files.powerpc - remove pmap.c - add mmu_if.h, mmu_oea.c, pmap_dispatch.c powerpc/include/mmuvar.h - definitions for MMU implementations powerpc/include/pmap.h - remove pmap_pte_spill declaration - add pmap_mmu_install declaration - size the phys_avail array - pmap_bootstrapped is now global-scope powerpc/powerpc/machdep.c - call kobj_machdep_init early in the boot sequence to allow kobj usage prior to SI_SUB_LOCK - install the OEA pmap code. This will be moved to CPU-specific init code in the future. powerpc/powerpc/mmu_if.m - Kobj MMU interface definitions powerpc/powerpc/pmap_dispatch.c - central dispatch for pmap calls - contains the global mmu kobj and the routine to locate the the mmu implementation and init the kobj
2005-11-08 06:48:08 +00:00
powerpc/powerpc/mmu_if.m standard
mp_machdep.c is only conditional upon smp, not aim. If booke grows support for smp, mp_machdep.c needs to be included as well.
2008-04-30 00:50:50 +00:00
powerpc/powerpc/mp_machdep.c optional smp
Since the PS3 port was committed, the AIM nexus device works perfectly fine on all PowerPC platforms, whether or not they have Open Firmware. Remove some more duplication and have there be only one nexus driver.
2013-10-20 18:40:55 +00:00
powerpc/powerpc/nexus.c standard
Driver for OpenPIC compatible interrupt controllers. It's fairly PowerMac specific at the moment, but that should be fixable.
2002-07-09 11:26:10 +00:00
powerpc/powerpc/openpic.c standard
Add interrupt handling support code. I've tried to make this fairly platform-independant as some PowerPC platforms may not have openpic-style interrupt controllers. This may not have the best performance but it works for now.
2002-07-09 11:12:20 +00:00
powerpc/powerpc/pic_if.m standard
Insert a layer of indirection to the pmap code, using a kobj for the interface. This allows run-time selection of MMU code, based on CPU-type detection, or tunable-overrides when testing new code. Pre-requisite for G5 support. conf/files.powerpc - remove pmap.c - add mmu_if.h, mmu_oea.c, pmap_dispatch.c powerpc/include/mmuvar.h - definitions for MMU implementations powerpc/include/pmap.h - remove pmap_pte_spill declaration - add pmap_mmu_install declaration - size the phys_avail array - pmap_bootstrapped is now global-scope powerpc/powerpc/machdep.c - call kobj_machdep_init early in the boot sequence to allow kobj usage prior to SI_SUB_LOCK - install the OEA pmap code. This will be moved to CPU-specific init code in the future. powerpc/powerpc/mmu_if.m - Kobj MMU interface definitions powerpc/powerpc/pmap_dispatch.c - central dispatch for pmap calls - contains the global mmu kobj and the routine to locate the the mmu implementation and init the kobj
2005-11-08 06:48:08 +00:00
powerpc/powerpc/pmap_dispatch.c standard
Factor out platform dependent things unrelated to device drivers into a new platform module. These are probed in early boot, and have the responsibility of determining the layout of physical memory, determining the CPU timebase frequency, and handling the zoo of SMP mechanisms found on PowerPC. Reviewed by: marcel, raj Book-E parts by: raj
2009-05-14 00:34:26 +00:00
powerpc/powerpc/platform.c standard
powerpc/powerpc/platform_if.m standard
Add Altivec/VMX register support to ptrace. MFC after: 2 weeks Relnotes: yes
2015-01-14 07:01:21 +00:00
powerpc/powerpc/ptrace_machdep.c standard
Add syscons files, and also generate a syscons font since Apple SVGA adapters don't have one available in their ROMs.
2004-01-21 05:19:59 +00:00
powerpc/powerpc/sc_machdep.c optional sc
Add setjmp (needed for DDB).
2002-07-10 12:26:17 +00:00
powerpc/powerpc/setjmp.S standard
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
powerpc/powerpc/sigcode32.S optional powerpc | compat_freebsd32
powerpc/powerpc/sigcode64.S optional powerpc64
Follow up r223485, which made AIM use the ABI thread pointer instead of PCPU fields for curthread, by doing the same to Book-E. This closes some potential races switching between CPUs. As a side effect, it turns out the AIM and Book-E swtch.S implementations were the same to within a few registers, so move that to powerpc/powerpc. MFC after: 3 months
2013-11-11 17:37:50 +00:00
powerpc/powerpc/swtch32.S optional powerpc
powerpc/powerpc/swtch64.S optional powerpc64
Break out stack(9) from ddb(4): - Introduce per-architecture stack_machdep.c to hold stack_save(9). - Introduce per-architecture machine/stack.h to capture any common definitions required between db_trace.c and stack_machdep.c. - Add new kernel option "options STACK"; we will build in stack(9) if it is defined, or also if "options DDB" is defined to provide compatibility with existing users of stack(9). Add new stack_save_td(9) function, which allows the capture of a stacktrace of another thread rather than the current thread, which the existing stack_save(9) was limited to. It requires that the thread be neither swapped out nor running, which is the responsibility of the consumer to enforce. Update stack(9) man page. Build tested: amd64, arm, i386, ia64, powerpc, sparc64, sun4v Runtime tested: amd64 (rwatson), arm (cognet), i386 (rwatson)
2007-12-02 20:40:35 +00:00
powerpc/powerpc/stack_machdep.c optional ddb | stack
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
powerpc/powerpc/suswintr.c standard
powerpc/powerpc/syncicache.c standard
powerpc/powerpc/sys_machdep.c standard
Add file missed in r281096.
2015-04-05 02:43:36 +00:00
powerpc/powerpc/trap.c standard
Add support for 64-bit PowerPC CPUs operating in the 64-bit bridge mode provided, for example, on the PowerPC 970 (G5), as well as on related CPUs like the POWER3 and POWER4. This also adds support for various built-in hardware found on Apple G5 hardware (e.g. the IBM CPC925 northbridge). Reviewed by: grehan
2009-04-04 00:22:44 +00:00
powerpc/powerpc/uio_machdep.c standard
Also happened to miss this in r282264.
2015-04-30 04:44:41 +00:00
powerpc/powerpc/uma_machdep.c standard
Unify the AIM and Book-E vm_machdep.c implementations, which previously differed only with respect to the AIM version not following style(9) and some additional features for 64-bit systems and machines with direct maps in the AIM implementation that are no-ops on Book-E (at least for now).
2013-10-20 16:14:03 +00:00
powerpc/powerpc/vm_machdep.c standard
Import support for the Sony Playstation 3 using the OtherOS feature available on firmwares 3.15 and earlier. Caveats: Support for the internal SATA controller is currently missing, as is support for framebuffer resolutions other than 720x480. These deficiencies will be remedied soon. Special thanks to Peter Grehan for providing the hardware that made this port possible, and thanks to Geoff Levand of Sony Computer Entertainment for advice on the LV1 hypervisor.
2011-01-06 04:12:29 +00:00
powerpc/ps3/ehci_ps3.c optional ps3 ehci
Add an OHCI driver to complement the EHCI one. The infrastructure to attach both to the parent ps3bus was in r223313. This driver itself comes from the ps3 project branch.
2011-06-20 00:46:07 +00:00
powerpc/ps3/ohci_ps3.c optional ps3 ohci
Import support for the Sony Playstation 3 using the OtherOS feature available on firmwares 3.15 and earlier. Caveats: Support for the internal SATA controller is currently missing, as is support for framebuffer resolutions other than 720x480. These deficiencies will be remedied soon. Special thanks to Peter Grehan for providing the hardware that made this port possible, and thanks to Geoff Levand of Sony Computer Entertainment for advice on the LV1 hypervisor.
2011-01-06 04:12:29 +00:00
powerpc/ps3/if_glc.c optional ps3 glc
powerpc/ps3/mmu_ps3.c optional ps3
powerpc/ps3/platform_ps3.c optional ps3
powerpc/ps3/ps3bus.c optional ps3
Add support for the Blu-Ray drive found in the Sony Playstation 3 and fix some realted minor bugs in PS3 internal storage support. Submitted by: glevand <geoffrey.levand@mail.ru> Approved by: re (bz)
2011-08-14 00:20:37 +00:00
powerpc/ps3/ps3cdrom.c optional ps3 scbus
Driver for PS3's internal hard disk. Hopefully this can be CAM-ified in the future, but presents a set of simple block devices for now. With (forthcoming) boot loader support or vfs.root.mountfrom, allows booting PS3s from disk. Submitted by: glevand <geoffrey.levand@mail.ru>
2011-06-20 00:17:44 +00:00
powerpc/ps3/ps3disk.c optional ps3
Import support for the Sony Playstation 3 using the OtherOS feature available on firmwares 3.15 and earlier. Caveats: Support for the internal SATA controller is currently missing, as is support for framebuffer resolutions other than 720x480. These deficiencies will be remedied soon. Special thanks to Peter Grehan for providing the hardware that made this port possible, and thanks to Geoff Levand of Sony Computer Entertainment for advice on the LV1 hypervisor.
2011-01-06 04:12:29 +00:00
powerpc/ps3/ps3pic.c optional ps3
Move the PS3 framebuffer console to use vt instead of syscons and adjust GENERIC64 for PowerPC to use vt with it. Much to my chagrin, PS3 support seems to have bitrotted somewhat since the last time I tried it. ehci panics on attach and interrupt handling seems to be faulty. This should be fixed soon...
2014-05-11 05:49:35 +00:00
powerpc/ps3/ps3_syscons.c optional ps3 vt
powerpc/ps3/ps3-hvcall.S optional ps3
Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
2013-09-17 17:37:04 +00:00
powerpc/pseries/phyp-hvcall.S optional pseries powerpc64
powerpc/pseries/mmu_phyp.c optional pseries powerpc64
Only build the POWER hypervisor UART driver if device uart is included in the kernel config. Approved by: re (gjb)
2013-10-02 13:33:10 +00:00
powerpc/pseries/phyp_console.c optional pseries powerpc64 uart
Add initial driver for POWER hypervisor interpartition ethernet. This is sufficient to pass traffic but needs some more work before merging to STABLE.
2013-10-20 01:31:09 +00:00
powerpc/pseries/phyp_llan.c optional llan
Add driver for the PAPR VSCSI virtual SCSI controller. This lets FreeBSD install directly into standard POWER LPARs, as found for example in QEMU. The core of this device is the SCSI RDMA protocol as also found in Infiniband. The SRP portions of the driver will be factored out and placed /sys/cam in the future to allow them to be used for IB storage. Thanks to Scott Long for a great deal of implementation help. Reviewed by: scottl Approved by: re (kib)
2013-09-28 15:46:03 +00:00
powerpc/pseries/phyp_vscsi.c optional pseries powerpc64 scbus
Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
2013-09-17 17:37:04 +00:00
powerpc/pseries/platform_chrp.c optional pseries
powerpc/pseries/plpar_iommu.c optional pseries powerpc64
Following the approach with ACPI DMAR on x86, split IOMMU handling into a variant PCI bus instead of trying to shoehorn it into the PCI host bridge adapter. Besides matching better the architecture on other platforms, this also allows systems with multiple partitionable endpoints per PCI host bridge to work correctly.
2013-11-12 16:15:09 +00:00
powerpc/pseries/plpar_pcibus.c optional pseries powerpc64 pci
Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
2013-09-17 17:37:04 +00:00
powerpc/pseries/rtas_dev.c optional pseries
powerpc/pseries/rtas_pci.c optional pseries pci
powerpc/pseries/vdevice.c optional pseries powerpc64
powerpc/pseries/xics.c optional pseries powerpc64
Align.
2007-10-25 14:16:07 +00:00
powerpc/psim/iobus.c optional psim
powerpc/psim/ata_iobus.c optional ata psim
powerpc/psim/openpic_iobus.c optional psim
powerpc/psim/uart_iobus.c optional uart psim
Reference in New Issue Copy Permalink