depend on this. The linux ABI emulator tries to use it for some linux
binaries too. VM86 had a bigger cost than this and it was made default
a while ago.
Reviewed by: jhb, imp
and 1.84 of src/sys/netinet/udp_usrreq.c
The changes broken down:
- remove 0 as a wildcard for addresses and port numbers in
src/sys/netinet/in_pcb.c:in_pcbnotify()
- add src/sys/netinet/in_pcb.c:in_pcbnotifyall() used to notify
all sessions with the specific remote address.
- change
- src/sys/netinet/udp_usrreq.c:udp_ctlinput()
- src/sys/netinet/tcp_subr.c:tcp_ctlinput()
to use in_pcbnotifyall() to notify multiple sessions, instead of
using in_pcbnotify() with 0 as src address and as port numbers.
- remove check for src port == 0 in
- src/sys/netinet/tcp_subr.c:tcp_ctlinput()
- src/sys/netinet/udp_usrreq.c:udp_ctlinput()
as they are no longer needed.
- move handling of redirects and host dead from in_pcbnotify() to
udp_ctlinput() and tcp_ctlinput(), so they will call
in_pcbnotifyall() to notify all sessions with the specific
remote address.
Approved by: jlemon
Inspired by: NetBSD
interrupts.
Protect usage of the per processor switchtime variable against
interrupts in calcru().
This seem to eliminate the "microuptime() went backwards" warnings.
the the original trapframe of the syscall, trap, or interrupt that entered
the kernel. Before SMPng, ast's were handled via a psuedo trap at the
end of doerti. With the SMPng commit, ast's were broken out into a
separate ast() function that was called from doreti to match the behavior
of other architectures. Unfortunately, when this was done, the
p_md.md_regs member of curproc was not updateda in ast(), thus when
signals are handled by userret() after an interrupt that returns to
userland, we end up using a stale trapframe that will result in the
registers from the old trapframe overwriting the real trapframe and
smashing all the registers right before we return to usermode. The saved
%cs:%eip from where we were in usermode are saved in the trapframe for
example.
- Don't use an atomic operation to update cnt.v_soft in ast(). This is
the only place the variable is written to, and sched_lock is always
held when it is written, so it is already protected and the mutex release
of sched_lock asserts a memory barrier that ensures the value will be
updated in a timely fashion.
warning on Alphas. It is still not the perfect solution for machines
which sizeof(u_long) != sizeof(void *) but it is as close as we are going
to get for now and consistent with the rest of the code. 8.12 has solved
this problem by providing a portable snprintf() which understands %p.
PR: bin/14142
packet flow into two unidirectional flows.
Part of a suite of nodes developed for packet flow control.
More to follow as I have time to port them to 5.x or
as others do so. The ipfw node will be the hardest..
Submitted by: "Vitaly V. Belekhov" <vitaly@riss-telecom.ru>
- Remove unneeded spl()'s around mi_switch() in userret().
- Don't hold sched_lock across addupc_task().
- Remove the MD function child_return() now that the MI function
fork_return() is used instead.
- Use TRAPF_USERMODE() instead of dinking with the trapframe directly to
check for ast's in kernel mode.
- Check astpending(curproc) and resched_wanted() in ast() and return if
neither is true.
- Use astoff() rather than setting the non-existent per-cpu variable
astpending to 0 to clear an ast.
- Don't hold sched_lock around addupc_task() as this apparently breaks
profiling badly due to sched_lock being held across copyin().
Reported by: bde (2)
for us.
- Change the switch_trampoline() to call fork_exit() passing in the
required arguments instead of calling the fork trampoline callout
function directly.
Warning: this hasn't been tested.
Looked over by: dfr
Submitted by: Maxim Konovalov <maxim@macomnet.ru>
Silence a warning by renaming the 'pgtok' #define to 'vmstat_pgtok' so
as not to conflict with the 'pgtok' #define in sys/param.h
* Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk>
after we pull in /etc/make.conf. We need to do it afterwards so we can
react to the user setting of the:
* CPUTYPE variable, which contains the CPU type which the user wants to
optimize for. For example, if you want your binaries to only run on an
i686-class machine (or higher), set this to i686. If you want to support
running binaries on a variety of CPU generations, set this to the lowest
common denominator. Supported values are listed in make.conf.
* bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the
(hopefully) correct unordered list of CPU types which should be used on
that CPU. For example, an AMD k6 CPU wants any of the following:
k6 k5 i586 i486 i386
This is still an unordered list so the client makefile logic is simple -
client makefiles need to test for the various elements of the set in
decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before.
The various MACHINE_CPU lists are believed to be correct, but should be
checked.
* If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization
settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release
builders and developers of third-party software need to make sure not to
enable CPU-specific optimization when generating code intended to be
portable. We probably need to move to an /etc/world.conf to allow the
optimization stuff to be applied separately to world/kernel and external
compilations, but it's not any worse a problem than it was before.
* Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE.
* Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc
(only i386, alpha and ia64 first, since those are the minimally-working
ports. Other architecture porters, please feel free to add the relevant
gunk for your platform).
Reviewed by: jhb, obrien
* Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk>
after we pull in /etc/make.conf. We need to do it afterwards so we can
react to the user setting of the:
* CPUTYPE variable, which contains the CPU type which the user wants to
optimize for. For example, if you want your binaries to only run on an
i686-class machine (or higher), set this to i686. If you want to support
running binaries on a variety of CPU generations, set this to the lowest
common denominator. Supported values are listed in make.conf.
* bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the
(hopefully) correct unordered list of CPU types which should be used on
that CPU. For example, an AMD k6 CPU wants any of the following:
k6 k5 i586 i486 i386
This is still an unordered list so the client makefile logic is simple -
client makefiles need to test for the various elements of the set in
decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before.
The various MACHINE_CPU lists are believed to be correct, but should be
checked.
* If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization
settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release
builders and developers of third-party software need to make sure not to
enable CPU-specific optimization when generating code intended to be
portable. We probably need to move to an /etc/world.conf to allow the
optimization stuff to be applied separately to world/kernel and external
compilations, but it's not any worse a problem than it was before.
* Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE.
* Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc
(only i386, alpha and ia64 first, since those are the minimally-working
ports. Other architecture porters, please feel free to add the relevant
gunk for your platform).
Reviewed by: jhb, obrien
