so that a ppp running in `receiver' (server) mode can properly
update routes, for example to update the MTU.
Submitted by: loos.br gmail.com (Luiz Otavio O Souza)
PR: bin/130159
PR: kern/125079, kern/122068, bin/126892
MFC after: 3 days
the same inode number after VFS_VGET() and relock of the vp. If '..'
changed, redo the lookup. To reduce code duplication, move the code to
read '..' dirent into the static helper function ufs_dir_dd_ino().
Supply the source inode number as an argument to ufs_checkpath() instead
of the source inode itself. The inode is unlocked, thus it might be
reclaimed, causing accesses to the freed memory.
Use vn_vget_ino() to get the '..' vnode by its inode number, instead of
directly code VFS_VGET() and relock, to properly busy the mount point
while vp lock is dropped.
Noted and reviewed by: tegge
Tested by: pho
MFC after: 1 month
variable. Acquire the interface address list lock when iterating over
the interface address list searching for a matching received broadcast
address.
MFC after: 2 weeks
or ignored SIGCHLD, unconditionally wake up the parent instead of doing
this only when the child is a last child.
This brings us in line with other U**xes that support SA_NOCLDWAIT. If
the parent called waitpid(childpid), then exit of the child should wake
up the parent immediately instead of forcing it to wait for all children
to exit.
Reported by: Alan Ferrency <alan pair com>
Submitted by: Jilles Tjoelker <jilles stack nl>
PR: 108390
MFC after: 2 weeks
a fair number of static data structures, making this an unlikely
option to try to change without also changing source code. [1]
Change default cache line size on ia64, sparc64, and sun4v to 128
bytes, as this was what rtld-elf was already using on those
platforms. [2]
Suggested by: bde [1], jhb [2]
MFC after: 2 weeks
stability, check for gw to be set before adding the flag and the address
to the routing message.
r186308, backed out in r191305, already tried to do that, and in addition
ignore AF_LINK types of gateway addresses to work around a problem that
r167797 had introduced on the kernel side always setting RTF_GATEWAY if a
gateway address was passed into the kernel.
The proper solution for this is still under discussion so I am hesitant to
re-add the special AF_LINK treatment for now.
MFC after: 3 days
in case of AF_LINK, which the kernel still returns for an RTAX_GATEWAY
as an empty sockaddr_dl in the classic tun<n> case.
Copying the address into the message payload, but not the RTA_GATEWAY
flag results in rt_xaddrs() in the kernel tripping over that and parsing
the next attribute set with a flag, i.e. RTA_NETMASK, with the gateway
address, resulting in bogus route entry.
MFC after: 3 days
The device index number stored in the unit number of sa(4) devices is
only used to print debug messages. Get rid of this index number and use
devtoname() to just print the entire device name.
checksum offload frames. Software workaround used for broken
controllers(RTL8169, RTL8168, RTL8168B) seem to cause watchdog
timeouts on RTL8139C+.
Introduce a new flag RL_FLAG_AUTOPAD to mark automatic padding
feature of controller and set it for RTL8139C+ and controllers that
use new descriptor format. This fixes watchdog timeouts seen on
RTL8139C+.
Reported by: Dimitri Rodis < DimitriR <> integritasystems dot com >
Tested by: Dimitri Rodis < DimitriR <> integritasystems dot com >
Introduce pmap_try_insert_pv_entry(), a function that conditionally
creates a pv entry if the number of entries is below the high water mark
for pv entries.
Introduce pmap_enter_quick_locked() and use it to reimplement
pmap_enter_object(). The old implementation was broken. For example,
it could block while holding a mutex lock.
Change pmap_enter_quick_locked() to fail rather than wait if it is
unable to allocate a page table page. This prevents a race between
pmap_enter_object() and the page daemon. Specifically, an inactive
page that is a successor to the page that was given to
pmap_enter_quick_locked() might become a cache page while
pmap_enter_quick_locked() waits and later pmap_enter_object() maps
the cache page violating the invariant that cache pages are never
mapped. Similarly, change
pmap_enter_quick_locked() to call pmap_try_insert_pv_entry() rather
than pmap_insert_entry(). Generally speaking,
pmap_enter_quick_locked() is used to create speculative mappings. So,
it should not try hard to allocate memory if free memory is scarce.
Tested by: gonzo
arguments. This change should be MFC'd with OpenBSM 1.1 since they
are interdependent.
MFC after: 2 weeks
Obtained from: TrustedBSD Project
Sponsored by: Apple, Inc.
login(1) isn't quite ready for them yet on 64-bit systems as it continues
to use the conventions of the old version of the API.
Reported by: stas, Jakub Lach <jakub_lach at mailplus.pl>
the vmspace of the examined process instead of directly accessing its
vmspace, that may change. Also, as an optimization, check for P_INEXEC
flag before examining the process.
Reported and tested by: pho (previous version)
Reviewed by: alc
MFC after: 3 week
CACHE_LINE_SIZE constant. These constants are intended to
over-estimate the cache line size, and be used at compile-time
when a run-time tuning alternative isn't appropriate or
available.
Defaults for all architectures are 64 bytes, except powerpc
where it is 128 bytes (used on G5 systems).
MFC after: 2 weeks
Discussed on: arch@
OpenBSM history for imported revision below for reference.
MFC after: 2 weeks
Sponsored by: Apple, Inc.
Obtained from: TrustedBSD Project
OpenBSM 1.1
- Change auditon(2) parameters and data structures to be 32/64-bit architecture
independent. Add more information to man page about auditon(2) parameters.
- Add wrapper functions for auditon(2) to use legacy commands when the new
commands are not supported.
- Add default for 'expire-after' in audit_control to expire trail files when
the audit directory is more than 10 megabytes ('10M').
- Interface to convert between local and BSM fcntl(2) command values has been
added: au_bsm_to_fcntl_cmd(3) and au_fcntl_cmd_to_bsm(3), along with
definitions of constants in audit_fcntl.h.
- A bug, introduced in OpenBSM 1.1 alpha 4, in which AUT_RETURN32 tokens
generated by audit_submit(3) were improperly encoded has been fixed.
- Fix example in audit_submit(3) man page. Also, make it clear that we want
the audit ID as the argument.
- A new audit event class 'aa', for post-login authentication and
authorization events, has been added.
since the last imported OpenBSM release:
OpenBSM 1.1
- Change auditon(2) parameters and data structures to be 32/64-bit architecture
independent. Add more information to man page about auditon(2) parameters.
- Add wrapper functions for auditon(2) to use legacy commands when the new
commands are not supported.
- Add default for 'expire-after' in audit_control to expire trail files when
the audit directory is more than 10 megabytes ('10M').
- Interface to convert between local and BSM fcntl(2) command values has been
added: au_bsm_to_fcntl_cmd(3) and au_fcntl_cmd_to_bsm(3), along with
definitions of constants in audit_fcntl.h.
- A bug, introduced in OpenBSM 1.1 alpha 4, in which AUT_RETURN32 tokens
generated by audit_submit(3) were improperly encoded has been fixed.
- Fix example in audit_submit(3) man page. Also, make it clear that we want
the audit ID as the argument.
- A new audit event class 'aa', for post-login authentication and
authorization events, has been added.
Obtained from: TrustedBSD Project
Sponsored by: Apple, Inc.
- Add and use mapping of fcntl(2) commands to new BSM constant space.
- Adopt (int) rather than (long) arguments to a number of auditon(2)
commands, as has happened in Solaris, and add compatibility code to
handle the old comments.
Note that BSM_PF_IEEE80211 is partially but not fully removed, as the
userspace OpenBSM 1.1alpha5 code still depends on it. Once userspace
is updated, I'll GCC the kernel constant.
MFC after: 2 weeks
Sponsored by: Apple, Inc.
Obtained from: TrustedBSD Project
Portions submitted by: sson
Glibc does not use this operation since 2.3.3 version (Jun 2004),
as it is racy and replaced by FUTEX_CMP_REQUEUE operation.
Glibc versions prior to 2.3.3 fall back to FUTEX_WAKE when
FUTEX_REQUEUE returned EINVAL.
Any application directly using FUTEX_REQUEUE without return
value checking are definitely broken.
Limit quantity of messages per process about unsupported
operation.
Approved by: kib (mentor)
MFC after: 1 month
as kernel modules will need to be rebuilt. These fields existed to support
binary compatibility with kernel modules from before the introduction of
libmemstat(3) in FreeBSD 6.x, so they are no longer required.
more selective about what libarchive features we pull in:
* No compression support
* Only cpio and ustar writing
* Only cpio and tar/pax readers
This reduces a statically linked, stripped binary from 900k to 680k
and completely eliminates the dependency on libcrypto.
replace magic numbers with constants to keep this from happening again.
Without this fix, some programs would occasionally get SIGTRAP instead
of SIGILL on an illegal instruction. This affected Altivec detection
in pixman, and possibly other software.
Reported by: Andreas Tobler
MFC after: 1 week
