statement. When no caches support was added, it looks like
TARGET_OCTEON was bogusly moved inside the if. Also, include
opt_cputype.h to make TARGET_OCTEON actually active.
# now we die in pmap init somewhere... Most likely because 32MB of RAM is
# too tight given the load address we're using.
o Introduce a uart bus space so that we don't have to hack dev/uart to do 8
byte reads. This also handles the shift properly, so reset the shift we
want dev/uart doing to 0. In effect, this bus space makes the octeon
registers have an interface to dev/uart that looks just like the old ISA
bus, but does the necessary 64-bit read/write to the bus. We only support
read/write operations. We do all the widths, but likely could get away
with only 64-bit and 8-bit given the restricted nature of use of this bus.
o use bus_space_map to set the .bsh rather than a direct assignment.
o Minor cleanup of uart_cpu_getdev to make it conform more to the other
implementations.
o Add some coments for future work.
# with these changes, we now make it through cninit, but there's still some
# problem that's preventing output, as well as another problem that causes
# us to call panic just after we return from cninit() in platform_start.
cacheable window on physical memory (KSEG0). On the Sibyte processor
going through the uncacheable window (KSEG1) bypasses both L1 and L2
caches so we may end up with stale contents in the L2 cache.
This also makes it consistent with the rest of the function that
uses cacheable mappings to copy pages.
Approved by: imp (mentor)
fixed-state media with parameters set via hints
and configure MAC accordingly to these parameters.
All the underlying PHY magic is done by boot manager
on startup. At the moment there is no proper way
to make active and control all PHYs simultaneously
from one MII bus and there is no way to associate
incoming/outgoing packet with specific PHY.
original codes (I had changed one by accident)
Also do the pic_ack/pic_delayed_ack after the interrupt
so we clear it. The clock with these changes starts working.
Its off doing a short/long short/long warning but it
now runs.
My NFS mount now works but has the same problem with
sbin/init (errno 8 ENOEXEC) so it panics with no init.
Either this is a problem with my buildworld.. OR its a
yet undiscovered RMI issue.
page fault panic on initialization due to a large
number of bounce pages being allocated. This is due
to the dma tag requiring page alignment on mbuf mapping.
This was removed some time back from the ixgbe driver
and is not needed here either.
first part of a verifier is set to the first IP address from
V_in_ifaddrhead list. This address is typically the loopback address
making the first part of the verifier practically non-unique. The second
part of the verifier is initialized to zero making its initial value
non-unique too.
This commit changes the strategy for create verifier initialization:
just initialize it to a random value. Also move verifier handling into
its own function and use a mutex to protect the variable.
This change is a candidate for porting to sys/nfsclient.
Reviewed by: jhb, rmacklem
Approved by: trasz (mentor)
stepped down some time ago, about the same time as Giorgos Keramidas
joined the team.
PR: 140465
Submitted by: Denny Lin <dennylin93@cnmc32.hs.ntnu.edu.tw>
MFC after: 2 weeks
- Move tagged queueing control from ADA to ATA XPT. It allows to control
device command queue length correctly. First step to support < 32 tags.
- Limit queue for non-tagged devices by 2 slots for ahci(4) and siis(4).
- Implement quirk matching for ATA devices.
- Move xpt_schedule_dev_sendq() from header to source file.
- Move delayed queue shrinking to the more expected place - element freeing.
- Remove some SCSIsms in ATA.
These keys have different sequences when using cursorkeys, while insert
and delete stay the same. If they are placed like this, libteken will
return NULL instead of a proper sequence for these characters.
This will make it more easy for people to experiment with TERM=xterm.
Instead of echoing these strange escape sequences, I can just instruct
them to run `vidcontrol -T xterm'.
xterm and cons25 have some incompatibilities when it comes to escape
sequences for special keys, such as F1 to F12, home, end, etc. Add a new
te_fkeystr() that can be used to override the strings.
scterm-sck won't do anything with this, but scterm-teken will use
teken_get_sequences() to obtain the proper sequence.
I thought this only had to be done when in origin mode, to ensure that
the cursor is not placed outside the origin, but it seems this is also
done when not in origin mode.
This fixes some artifacts when pressing ^L while running irssi in tmux.
(Almost) nobody noticed this, because cons25 doesn't have scrolling
regions.
