Speedup is hard to measure because the only time vdev_geom_open_by_guids
gets called on many drives at the same time is during boot. But with
vdev_geom_open hacked to always call vdev_geom_open_by_guids, operations
like "zpool create" speed up by 65%.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c
* Read all of a vdev's labels in parallel instead of sequentially.
* In vdev_geom_read_config, don't read the entire label, including
the uberblock. That's a waste of RAM. Just read the vdev config
nvlist. Reduces the IO and RAM involved with tasting from 1MB to
448KB.
Reviewed by: avg
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6153
It is normal for ZOMBIE ports to be logged out. This status is not really
an error until Gone Device Timeout expires, so make CAM retry after delay.
MFC after: 1 week
Firmware automatically logs in only to local loop ports, and those ports
can be easily identified without extra flag by zero domain and area IDs.
MFC after: 1 week
supports the Security Extensions or not. This bit is not the same as the CPU one.
Currently we are not checking for either before trying to write to the special
registers. This can lead to problems on hardware or simulators that do not
provide the security extensions. Add the missing checks. Their interactions with
the CPU flag is not entirely clear to me but using a macro will make it easier
to quickly adjust the condition once the CPU bits are sorted as well.
Reviewed by: br
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D6397
* In gic_v3_attach free the correct data on failure.
* Implement gic_v3_teardown_intr.
* Update the panic string when enabling/disabling an invalid interrupt.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013.
A robust mutex is guaranteed to be cleared by the system upon either
thread or process owner termination while the mutex is held. The next
mutex locker is then notified about inconsistent mutex state and can
execute (or abandon) corrective actions.
The patch mostly consists of small changes here and there, adding
neccessary checks for the inconsistent and abandoned conditions into
existing paths. Additionally, the thread exit handler was extended to
iterate over the userspace-maintained list of owned robust mutexes,
unlocking and marking as terminated each of them.
The list of owned robust mutexes cannot be maintained atomically
synchronous with the mutex lock state (it is possible in kernel, but
is too expensive). Instead, for the duration of lock or unlock
operation, the current mutex is remembered in a special slot that is
also checked by the kernel at thread termination.
Kernel must be aware about the per-thread location of the heads of
robust mutex lists and the current active mutex slot. When a thread
touches a robust mutex for the first time, a new umtx op syscall is
issued which informs about location of lists heads.
The umtx sleep queues for PP and PI mutexes are split between
non-robust and robust.
Somewhat unrelated changes in the patch:
1. Style.
2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared
pi mutexes.
3. Removal of the userspace struct pthread_mutex m_owner field.
4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls
the lifetime of the shared mutex associated with a vnode' page.
Reviewed by: jilles (previous version, supposedly the objection was fixed)
Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects)
Tested by: pho
Sponsored by: The FreeBSD Foundation
structures in the add of a new tcp-stack that came in late to me
via email after the last commit. It also makes it so that a new
stack may optionally get a callback during a retransmit
timeout. This allows the new stack to clear specific state (think
sack scoreboards or other such structures).
Sponsored by: Netflix Inc.
Differential Revision: http://reviews.freebsd.org/D6303
method. This is required for upcoming iSER support.
Obtained from: Mellanox Technologies (earlier version)
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
FreeBSD zfs_ioc_rename() has an option, not present upstream, that
allows to rename snapshots without unmounting them first. I am not sure
what is a rationale for that option, but its actual behavior was the
opposite of the intended behavior. That is, by default the snapshots
were not unmounted.
The option was introduced as part of a large update from upstream in
r248498.
One of the consequences was a havoc under .zfs/snapshot after the rename.
The snapshots got new names but were mounted on top of directories with
old names, so readdir would list the new names, but lookup would still
find the old mounts.
PR: 209093
Reported by: Frédéric VANNIÈRE <f.vanniere@planet-work.com>
MFC after: 5 days
rework might be needed to support asymetrical limits, but this should be
ok for now.
Obtained from: Mellanox Technologies (earlier version)
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
objects with the same name in different sets.
Add optional manage_sets() callback to objects rewriting framework.
It is intended to implement handler for moving and swapping named
object's sets. Add ipfw_obj_manage_sets() function that implements
generic sets handler. Use new callback to implement sets support for
lookup tables.
External actions objects are global and they don't support sets.
Modify eaction_findbyname() to reflect this.
ipfw(8) now may fail to move rules or sets, because some named objects
in target set may have conflicting names.
Note that ipfw_obj_ntlv type was changed, but since lookup tables
actually didn't support sets, this change is harmless.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
* The default kernel and options won't build the GPL PHY bits;
* bwn(4) defaults to building as a module anyway!;
* If BWN_GPL_PHY is specified in the config file, and you uncomment
the GPL PHY bits in the module Makefile, you'll get a working
N-PHY.
This is specifically designed to be obtuse for now, as I don't want
to flip it on by default. It's easy enough for people to flip on
and build, and it's a module so the default GENERIC kernel won't be
GPL tainted.
I'll have to add an actual HAL layer that allows the GPL PHY to be loaded
before if_bwn so it can be "magic", but that'll come later.
Tested:
* BCM4321 11abg NIC, STA mode
This is a GPLv2 PHY-N implementation based on the Linux b43 driver,
ported over to work in bwn(4).
I've tested this on the BCM4321 11abgn device, in 11bg and 11a modes.
The b43 PHY code only supports 11abg, no 11n, and 20MHz only wide
channels.
Yes, this is a GPLv2 driver, so it won't be included in the
default builds.
Tested:
* BCM4321 11abgn device (Apple!), 11bg and 11a STA mode.
Obtained from: Linux b43
Now that we've got access to SPROM and can access board identification,
this implements all known remaining hardware work-arounds for the bhnd(4)
PCI and PCIe-G1 cores operating endpoint mode.
Additionally, this adds an initial set of skeleton PCIe-G2 hostb and pcib
drivers, required by fullmac and newer softmac devices.
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6377
PCIe PHY needs different initialization on MT7628/MT7688 SoCs than it does
on MT7620.
However, LEDE (and OpenWRT) dts files have the PCIe node for MT7628/MT7688
as compatible with mt7620-pci.
We already can handle this properly in our driver, so we just need to add
compat strings to fbsd-mt7628an.dtsi and the PCIe driver.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6395
This is an import of the reworked LEDE dts files. Besides other things
they make it easier for us to reuse.
The only diffs left are for the following SoCs:
MT7620A (fbsd-mt7620a.dtsi)
MT7621 (fbsd-mt7621.dtsi)
MT7628 (fbsd-mt7628an.dtsi)
RT3883 (fbsd-rt3883.dtsi)
So we include the fbsd-*.dtsi files at the end of the original LEDE dtsi
files, using '#include "fbsd-xxxx.dtsi"'.
For example, for MT7621, the LEDE dtsi file is mt7621.dtsi. At the end of
it we add:
#include "fbsd-mt7621.dtsi"
Approved by: adrian (mentor)
Obtained from: LEDE project
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6394
Fix issues that crept in with initial import.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6393
Fix efx_mcdi_request_poll so it only raises an exception if EIO is
reported from a detected MC assert or reboot. This prevents
an unnecessary exception being raised if an MCDI response error code
is trandlated to EIO.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6392
The event/timer block used sysclk in Huntington, but has been
moved to the dpcpu clock domain for Medford. Fix the computed
timer quantum to use the right clock.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6389
This allows the driver to fall back to the largest usable MTU if a
user attempts to configure an unprivileged function with an MTU higher
than that of the attached port.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6387
Check licensing support at NIC startup to avoid multiple checks later.
As state is stored, licensing initialisation is moved later in start
procedure.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6385
Centralizes fetching of board information (vendor, type, revision, etc),
and adds support for matching quirks against board identification info.
* Adds a BHND_BUS_READ_BOARD_INFO(), allowing bhnd bus/bus parent(s) to
handle implementation-specific fetching of board info.
* Integrates board type constants from the latest Broadcom ISC-licensed
bcmdevs.h included in dd-wrt's Broadcom driver source drops.
* Adds support for matching on chip/board quirks to bhnd_device_quirks()/
bhnd_chip_quirks().
* Use the new board/chip quirk matching to match Apple devices that failed
to set BFL2_PCIEWAR_OVR in SROM.
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6361
