When -C was introduced in r114137 the plan was to have -C and -c being used for
"create" due to a typo in FreeBSD <= 4.8 a temporary compatibility hack has been
added to make -c being like -G aka GLOB and a warning was issued for the user to
be aware of the futur change for -c.
12 years later it is more than time to remove that hack and finish the what was
intent in r114137
Submitted by: Alexandre Perrin <alex@kaworu.ch>
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D4000
whether an error is recoverable. Always re-dirty the buffer on errors
from write requests. The invalidation we used to do for errors not EIO
doesn't need to be done for a device that's really gone, since that's
done in a different path.
Reviewed by: mckusick@, kib@
This can have important debugging information such as 'cc: not found' or
'ccache: error: Could not find compiler "cc" in PATH'.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
mips24k/mips74k document that we need an explicit SYNC so to order
things correctly, even with access to uncachable memory.
We were doing calls to SYNC in the cache ops (inv, wbinv) but we
weren't doing it for uncachable memory.
When I ported this code from netbsd I was .. slightly mips74k greener.
I used writethrough because (a) it's what netbsd did, and (b) if I used
writethrough then things "didn't work."
Fast-forward a couple years, more MIPS hacking and a whole lot more
understanding of the bus APIs (the last few commits notwithstanding;
it's been a long week, ok?) and I have this working for arge,
argemdio, spi and ath. Hans has it working for USB. The ath barrier
code will come in a later commit.
This gets the routing throughput up from 220mbit -> 337mbit.
I'm sure the bridging throughput will be similarly improved.
Tested:
* QCA955x SoC, routing workload.
* use barriers in a slightly better fashion. You can blame this
glass of whiskey on putting barriers in the wrong spot. Grr adrian.
* steal/rewrite the mdio busy check from ag7100 from openwrt and
refactor the existing code out. This is .. more correct.
This seems to fix the boot-to-boot variation that I've been seeing
and it quietens the switch port status flapping.
Tested:
* QCA9558 SoC (AP135.)
Obtained from: Linux OpenWRT
This driver and the linux ag71xx driver both treat the transmit ring
as a circular linked list of descriptors. There's no "end" pointer
that is ever NULL - instead, it expects the MAC to hit a finished
descriptor (ARGE_DESC_EMPTY) and stop.
Now, since it's a circular buffer, we may end up with the hardware
hitting the beginning of our multi-descriptor frame before we've finished
setting it up. It then DMA's it in, starts sending it, and we finish
writing out the new descriptor. The hardware may then write its
completion for the next descriptor out; then we do, and when we next
read it it'll show up as "not done" and transmit completion stops.
This unfortunately manifests itself as the transmit queue always
being active and a massive TX interrupt storm. We need to actively
ACK packets back from the transmit engine and if we don't (eg because
we think the transmit isn't finished but it is) then the unit will
just keep generating interrupts.
I hit this finally with the below testing setup. This fixed it for me.
Strictly speaking I should put in a sync in between writing out all of
the descriptors and writing out that final descriptor.
Tested:
* QCA9558 SoC (AP135 reference board) w/ arge1 + vlans acting as a
router, and iperf -d (tcp, bidirectional traffic.)
Obtained from: Linux OpenWRT (ag71xx_main.c.)
The MIPS busdma sync operations currently are a big no-op on coherent memory.
This isn't strictly correct behaviour as we need a SYNC in here to ensure that
the writes have finished and are visible in main memory before the MMIO accesses
occur. This will have to be addressed in a later commit.
But, before that happens, let's at least do a flush here to make things
more "correct".
This is required for even remotely sensible behaviour on mips74k with
write-through memory enabled.
The mips74k programmers guide notes that reads can be re-ordered, even
uncached ones, so we need an explicit SYNC between them.
Yes, this is a case of a driver author actively doing a bus barrier
operation.
This ends up being necessary when the mips74k core is run in write-back
mode rather than write-through mode. That's coming in an upcoming
commit.
Tested:
* mips74k, QCA9558 SoC (AP135 reference board), arge<->arge interface
routing traffic tests.
send frames.
This matches the other check for space.
"enough" is a misnomer, for "reasons". The biggest reason is that
the TX ring is actually a circular linked list, with no head/tail pointers.
This is just a bit more headroom between head/tail so we have time to
schedule frames before we hit where the hardware is at.
Ideally this would be tunable and a little larger.
This flushes out the write to the system before anything continues.
The mips74k guide, chapter 3.3.3 (write gathering) notes that writes
can be buffered in FIFOs - even uncached ones - so we can't guarantee
the device has felt its effects. Now, since we're all lazy driver
authors and don't pepper read/write barriers everywhere, fake it here.
tested:
* mips74k - QCA9558 SoC (AP135 reference board)
It is definitely not needed after r288158, and is a private variable as well
that should not be checked here.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
self-documented, and eases addition of new ops.
For the similar reasons, eliminate UMTX_OP_MAX. nitems() handles the
only use of the symbol.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Only enable h_raw on x86 targets for today so that a buildworld runs to
completion for clang enabled targets that are not x86. This should be
removed when validation of the sanitizer has occured for all targets
supported by FreeBSD and clang.
Fixes race condition observed under following circumstances:
1) I/O split on 128KB boundary with Intel NVMe controller.
Current Intel controllers produce better latency when
I/Os do not span a 128KB boundary - even if the I/O size
itself is less than 128KB.
2) Per-CPU I/O queues are enabled.
3) Child I/Os are submitted on different submission queues.
4) Interrupts for child I/O completions occur almost
simultaneously.
5) ithread for child I/O A increments bio_inbed, then
immediately is preempted (rendezvous IPI, higher priority
interrupt).
6) ithread for child I/O B increments bio_inbed, then completes
parent bio since all children are now completed.
7) parent bio is freed, and immediately reallocated for a VFS
or gpart bio (including setting bio_children to 1 and
clearing bio_driver1).
8) ithread for child I/O A resumes processing. bio_children
for what it thinks is the parent bio is set to 1, so it
thinks it needs to complete the parent bio.
Result is either calling a NULL callback function, or double freeing
the bio to its uma zone.
PR: 203746
Reported by: Drew Gallatin <gallatin@netflix.com>,
Marc Goroff <mgoroff@quorum.net>
Tested by: Drew Gallatin <gallatin@netflix.com>
MFC after: 3 days
Sponsored by: Intel
if they are not required for mounting rootfs. However, it's possible
that some setups try to mount them in mountcritlocal (ie from fstab).
Export the list of current root mount holds using a new sysctl,
vfs.root_mount_hold, and make mountcritlocal retry if "mount -a" fails
and the list is not empty.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3709
status registers for every interrupt. Check a common host channel
status interrupt register first, then conditionally read the
individual host channel status registers.
Submitted by: Sebastian Huber <sebastian.huber@embedded-brains.de>
MFC after: 1 week
The kernel dump does not store these values on the stack.
Use PCB structure to resolve PC and LR properly.
Submitted by: Wojciech Macek <wma@semihalf.com>
Reviewed by: jhb, kib
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4013
To make KGDB working, it needs to understand kernel ELF image.
By default it is compiled using EABI_5, which is not supported
on the gdb-6. As a workaround, treat these images as EABI_2 because
they share a lot of things in common.
This workaround does not guarantee ALL funtionalities
to work.
Submitted by: Wojciech Macek <wma@semihalf.com>
Reviewed by: jhb
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4012
b_asize can be zero if the block is compressed into an empty block
(ZIO_COMPRESS_EMPTY) and the trim code asserts that meaningless
zero-sized trimming is not attempted.
The logic for calling trim_map_free() is extracted into a new function
l2arc_trim() to minimize code duplication.
PR: 203473
Reported by: Willem Jan Withagen <wjw@digiware.nl>
Tested by: Willem Jan Withagen <wjw@digiware.nl>
MFC after: 11 days
Other sidenotes:
- Remove unused variables with main(..)
- Convert errx/exit with -1 to errx/exit with 1
- Fix a bogus test in try_directory_open
(expected_errno == expected_errno -> errno == expected_errno) [*]
- Fix some warnings related to discarded qualifiers
- Remove a bogus else-statement at the end of check_mmap_exec(..) in the
successful case. mmap(2), POSIX, Linux, etc all don't state what the
behavior is when mixing O_WRONLY + PROT_EXEC, so assume success for now to
get the test program to pass again.
PR: 201286 [*]
MFC after: 1 week
Submitted by: David Binderman <dcb314@hotmail.com>
Sponsored by: EMC / Isilon Storage Division
This change copies over amd64-cloudabi64.c to aarch64-cloudabi.c and
adjusts it to fetch the proper registers on aarch64. To reduce the
amount of shared code, the errno conversion function is moved into a
separate source file.
Reviewed by: jhb, andrew
Differential Revision: https://reviews.freebsd.org/D4023
- Remove -a from the usage message example dealing with specific
interfaces. -a only makes sense when not specifying an interface,
such that it's to be run on all interfaces
- Fix the pidfile option (it's -p, not -P)
- Change `interfaces` to `interface` to match the manpage
MFC after: 3 days
PR: 173744
Sponsored by: EMC / Isilon Storage Division
"one of many" targets, e.g. `make hello_world`, where hello_world is a C
program
Tested with: PROGS and PROGS_CXX
MFC after: 1 week
X-MFC with: r289289
Sponsored by: EMC / Isilon Storage Division
- Rename -r to -R to avoid the clash with makefs -r in NetBSD
- Note that -R is an FFS-specific option because it's not implemented
in cd9660 today
- Rename the roundup variable to "roundup-size" in the manpage and help
text for consistency with other variables.
- Bump .Dd (missed in r289203)
PR: 203707
MFC after: 1 week
X-MFC with: r289203
Differential Revision: https://reviews.freebsd.org/D3959
Reviewed by: adrian (earlier patch), emaste
Sponsored by: EMC / Isilon Storage Division
as lib/libc/rpc
This testcase requires rpcbind be up in running; otherwise the testcases
will time out and be skipped
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
We can't use copyout because destination memory is userland address
in another process but we have reference to respective page so map
the page into kernel address space and copy fragments there
because it is also used as an indicator of whether a name or an UID is
being used and we may have undefined results as 'name' may contain
uninitialized stack contents.
MFC after: 2 weeks
receives video memory address from VideoCore through property mailbox
channel. Older versions of firmware (and the one that is currently part
of sysutils/u-boot-rpi and sysutils/u-boot-rpi2) returned real physical
address, newer one returns VideoCore bus address, so we need to convert
it to actual physical address. this version works with both older and
newer interface.
