The existing code only checked the alignment of the first mbuf and
didn't enforce the size constraints.
This commit introduces a simple function to check the alignment and
size of all mbufs in the list. This fixes the initial issue in the
PR.
PR: kern/148307
Reviewed by: gonzo@
Updated PTE/PDE macros from http://svn.freebsd.org/base/user/jmallett/octeon
Introduce pmap_segshift() macro, use pmap_segmap() in place of pmap_pde, and
remove pmap_pde().
Approved by: rrs (mentor)
Obtained from: jmallett@
a virtual-mode version for use on 64-bit systems, which have 32-bit
firmware implementations and require similar constraints on addressing
to the real-mode implementation.
flag is always provided, and unconditionally retry after sleep for the
busy page or failed allocation.
The intent is to remove VM_ALLOC_RETRY eventually.
Proposed and reviewed by: alc
do on i386. The consequences of not doing so on amd64 became apparent
with the introduction of the COUNT_IPIS and COUNT_XINVLTLB_HITS
options. Specifically, single-threaded applications were generating
unnecessary IPIs to shoot-down the TLB on other processors. However,
this is clearly nonsensical because a single-threaded application is
only running on the current processor. The reason that this happens
is that pmap_activate() is unable to properly update the old pmap's
field "pm_active" without the correct "curpmap". So, in effect, stale
bits in "pm_active" were leading pmap_protect(), pmap_remove(),
pmap_remove_pages(), etc. to flush the TLB contents on some arbitrary
processor that wasn't even running the same application.
Reviewed by: kib
MFC after: 3 weeks
- Fix a bug where thread may be in sleeping state but the wchan won't
be set, leading to an empty container for sleepq_type(). [0]
Sponsored by: Sandvine Incorporated
[0] Submitted by: Bryan Venteicher
<bryanv at daemoninthecloset dot org>
MFC after: 3 days
X-MFC: 209577
by timeout/error of one of probe commands, process may continue infinitely.
Make CAM ATA more robust to faulty devices and false positive detections,
abort probe after two restarts on timeouts or ten on other errors.
Because slave PICs send all interrupts to their CPU 0 output line (which
is routed to a pin on the master PIC), changes to per-CPU register banks
like EOI on the slave PIC must be accessed for CPU 0, instead of the
CPU actually processing the interrupt.
Submitted by: Andreas Tobler
There are special cases where tty_rel_free() can be called twice in a
row, namely when closing and revoking the TTY at the same moment. Only
call destroy_dev_sched_cb() once.
Reported by: Jeremie Le Hen
MFC after: 1 week
the context of the process that reduced the effective count. Previously
all truncation as a result of unlink happened in the softdep flush
thread. This had the effect of being impossible to rate limit properly
with the journal code. Now the process issuing unlinks is suspended
when the journal files. This has a side-effect of improving rm
performance by allowing more concurrent work.
- Handle two cases in inactive, one for effnlink == 0 and another when
nlink finally reaches 0.
- Eliminate the SPACECOUNTED related code since the truncation is no
longer delayed.
Discussed with: mckusick
configuration to get IPv4 TSO work on BCM57780. While I'm here
apply the same fix to BCM5785 which shares similar hardware feature
of BCM57780. This change makes TSO work on BCM57780.
Tested by: Tong Liu <nemoliu <> gmail dot com>
specify the increment of vm_pageout_deficit when sleeping due to page
shortage. Then, in allocbuf(), the code to allocate pages when extending
vmio buffer can be replaced by a call to vm_page_grab().
Suggested and reviewed by: alc
MFC after: 2 weeks
numbers. This change adds a new function alloc_unr_specific() which
returns the requested unit number if it is free. If the number is
already allocated or out of the range, -1 is returned.
Update alloc_unr(9) manual page accordingly and add a MLINK for
alloc_unr_specific(9).
Discussed on: freebsd-hackers
between determining the other CPUs and calling cpu_ipi_selected(), which
apart from generally doing the wrong thing can lead to a panic when a
CPU is told to IPI itself (which sun4u doesn't support).
Reported and tested by: Nathaniel W Filardo
- Add __unused where appropriate.
MFC after: 3 days
is ordered by page index. This greatly simplifies the implementation,
since we no longer need to mark the pages with VPO_CLEANCHK to denote
the progress. It is enough to remember the current position by index
before dropping the object lock.
Remove VPO_CLEANCHK and VM_PAGER_IGNORE_CLEANCHK as unused.
Garbage-collect vm.msync_flush_flags sysctl.
Suggested and reviewed by: alc
Tested by: pho
it. This can happen in some cases when plugging in SD/SmartCard PC
Cards with empty slots. It is better to detect this bogosity, and
refuse to attach rather than panic with a division by zero (in one of
many places) down stream.
document one of the optional flags; clarify which of the flags are
optional (and which are not), and remove mention of a restriction on
the reclamation of cached pages that no longer holds since version 7.
MFC after: 1 week
large number of packets queued to a crashing process.
In a specific case you may get 2 ABORT's back (from
say two packets in flight). If the aborts happened to
be processed at the same time its possible to have
one free the association while the other is trying
to report all the outbound packets. When this occured
it could lead to a crash.
MFC after: 3 days
FreeBSD. SIFTR logs a range of statistics on active TCP connections to a log
file, providing the ability to make highly granular measurements of TCP
connection state. The tool is aimed at system administrators, developers and
researchers alike. Please take it for a spin and test it out - the man page
should have all the information required to get you going.
Many thanks go to the Cisco University Research Program Fund at Community
Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work
at the Centre for Advanced Internet Architectures, Swinburne University of
Technology is greatly appreciated.
Sponsored by: Cisco URP, FreeBSD Foundation
Reviewed by: dwmalone, gnn, rpaulo
Tested by: Many on freebsd-current@ and elsewhere over the years
MFC after: 1 month
If we save/restore the PageMask, the value set by the bootloader will
persist, and will cause problems later in TLB exception handler.
This caused a crash in AR71xx boards.
Also fixes the EntryHi mask in pte.h
Reported by: Luiz Otavio O Souza <lists.br@gmail.com>
Tested by: Luiz Otavio O Souza <lists.br@gmail.com>
Approved by: rrs (mentor)
a read-lock is being called to check the vtag-timewait cache.
Then in two cases (where a vtag is bad i.e. in the time-wait
state) the write-unlock is called NOT the read-unlock. Under
conditions where lots of associations are coming and going
this will cause the system to panic at some point.
MFC after: 3 days
the core changes but left out the shared code, lol.
Well, and a couple fixes to the core... hopefully
this will all be complete now.
Happy happy joy joy :)
What this provides is support for the 'virtual function'
interface that a FreeBSD VM may be assigned from a host
like KVM on Linux, or newer versions of Xen with such
support.
When the guest is set up with the capability, a special
limited function 82576 PCI device is present in its virtual
PCI space, so with this driver installed in the guest that
device will be detected and function nearly like the bare
metal, as it were.
The interface is only allowed a single queue in this configuration
however initial performance tests have looked very good.
Enjoy!!
Previously, the caller unlocked the page, and vm_pageout_clean()
immediately reacquired the page lock. Also, assert rather than test
that the page is neither busy nor held. Since vm_pageout_clean() is
called with the object and page locked, the page can't have changed
state since the caller verified that the page is neither busy nor
held.
one or more mappings to the bogus page must be replaced, call pmap_qenter()
just once. Previously, pmap_qenter() was called for each mapping to the
bogus page.
MFC after: 3 weeks
limit the advertised speed of an SFP+ to 1G, effectively
"forcing" link at that lower speed. It is off by default
and is enabled by sysctl dev.ix.0.force_gig=1, 0 will
set it back to the norm.
The mpt driver previously didn't report a 'maxio' size to CAM, and so the
da(4) driver limited I/O sizes to DFLTPHYS (64K) by default. The number
of scatter gather segments allowed, as reported to busdma, was
(128K / PAGE_SIZE) + 1, or 33 on architectures with 4K pages.
Change things around so that we wait until we've determined how many
segments the adapter can support before creating the busdma tag used for
buffers, so we can potentially support more S/G segments and therefore
larger I/O sizes.
Also, fix some things that were broken about the module unload path. It
still gets hung up inside CAM, though.
mpt.c: Move some busdma initialization calls in here, and call
them just after we've gotten the IOCFacts, and know how
many S/G segments this adapter can support.
mpt.h: Get rid of MPT_MAXPHYS, it is no longer used.
Add max_cam_seg_cnt, which is used to report our maximum
I/O size up to CAM.
mpt_cam.c: Use max_cam_seg_cnt to report our maximum I/O size to CAM.
Fix the locking in mpt_cam_detach().
mpt_pci.c: Pull some busdma initialization and teardown out and put
it in mpt.c. We now delay it until we know many scatter
gather segments the adapter can support, and therefore
how to setup our busdma tags.
mpt_raid.c: Make sure we wake up the right wait channel to get the
raid thread to wake up when we're trying to shut it down.
Reviewed by: gibbs, mjacob
MFC after: 2 weeks
This prevents a kernel fault by dividing with zero because the initial
rate was 0 and didn't be initialized.
Tested by: Warren Block <wblock at wonkity.com>
MFC after: 3 days
changed to RUN because ic->ic_newassoc isn't set anywhere now. In the
previous bwi_newassoc() is used to initialize AMRR rate routines.
Tested by: Warren Block <wblock at wonkity.com>
MFC after: 3 days
- Rename tdsignal() to tdsendsignal() and make it private to kern_sig.c.
- Add tdsignal() and tdksignal() routines that mirror psignal() and
pksignal() except that they accept a thread as an argument instead of
a process. They send a signal to a specific thread rather than to an
individual process.
Reviewed by: kib
"match" processing at the end of inner loop would look ahead into the next
rule, which is incorrect. Particularly, in the case when the next rule
started with F_NOT opcode it was skipped blindly.
To fix this, exit the inner loop with the continue operator forcibly and
explicitly.
PR: kern/147798
Use C99 initializers for the struct sysent generated by MAKE_SYSENT().
C++ does not have designator-initializer facility of C99, not using this
in the header makes us friendly to C++ kernel modules, whoever wants
such schism.
Requested by: mdf
MFC after: 6 days (not really)
