Commit Graph

142 Commits

Author SHA1 Message Date
marcel
f9d6eb1e75 Have nexus behave the same as the one on ARM (marvell SoCs), so as to
prevent warnings during boot WRT to the fdtbus attachment.
2011-01-29 20:28:17 +00:00
nwhitehorn
655a96888d Restructure how reset and poweroff are handled on PowerPC systems, since
the existing code was very platform specific, and broken for SMP systems
trying to reboot from KDB.

- Add a new PLATFORM_RESET() method to the platform KOBJ interface, and
  migrate existing reset functions into platform modules.
- Modify the OF_reboot() routine to submit the request by hand to avoid
  the IPIs involved in the regular openfirmware() routine. This fixes
  reboot from KDB on SMP machines.
- Move non-KDB reset and poweroff functions on the Powermac platform
  into the relevant power control drivers (cuda, pmu, smu), instead of
  using them through the Open Firmware backdoor.
- Rename platform_chrp to platform_powermac since it has become
  increasingly Powermac specific. When we gain support for IBM systems,
  we will grow a new platform_chrp.
2010-08-31 15:27:46 +00:00
raj
6496d826cc Convert Freescale PowerPC platforms to FDT convention.
The following systems are affected:

  - MPC8555CDS
  - MPC8572DS

This overhaul covers the following major changes:

  - All integrated peripherals drivers for Freescale MPC85XX SoC, which are
    currently in the FreeBSD source tree are reworked and adjusted so they
    derive config data out of the device tree blob (instead of hard coded /
    tabelarized values).

  - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC,
    QUICC, UART, CFI.

  - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire
    ocpbus(4) driver, which was based on hard-coded config data.

Note that world for these platforms has to be built WITH_FDT.

Reviewed by:	imp
Sponsored by:	The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
nwhitehorn
6075124f5d Move the EOI logic when starting ithreads into intr_machdep instead of
relying on it as a side effect of PIC_MASK() in the PIC drivers, and add
an inmplementation of assign_cpu() for the kernel interrupt layer.
2010-07-06 15:27:05 +00:00
marcel
40d52bd52b Remove the unneeded header <machine/intr.h>. 2010-07-02 02:17:39 +00:00
marcel
3afd8b158b Assign PCI intline values for ISA interrupts using the new INTR_VEC()
macro.
2010-06-24 05:49:58 +00:00
marcel
5f1f55f820 Pass the device_t of the AT PIC driver to atpic_intr() so that
we don't have to use a global variable. Pass a NULL frame pointer
to the dispatch function just like openpic(4).
2010-06-24 05:05:18 +00:00
marcel
aa2ac84e21 With openpic(4) using active-low as the default polarity, reconfigure
the internal interrupt sources as active-high. The internal interrupt
sources are disabled when programmed as active-low.

Note that the internal interrupts have no sense bit like the external
interrupts. We program them as edge-triggered to make sure we write a
0 value to a reserved register. It does not in any way say anything
about the sense of internal interrupt.
2010-06-23 23:16:27 +00:00
nwhitehorn
d7c1d40d53 Configure interrupts on SMP systems to be distributed among all online
CPUs by default, and provide a functional version of BUS_BIND_INTR().
While here, fix some potential concurrency problems in the interrupt
handling code.
2010-06-23 22:33:03 +00:00
nwhitehorn
c757ee90ae Provide for multiple, cascaded PICs on PowerPC systems, and extend the
OFW interrupt map interface to also return the device's interrupt parent.

MFC after:	8.1-RELEASE
2010-06-18 14:06:27 +00:00
marcel
5a3f075301 Fix an off-by-one bug for the number of slots on a PCI/PCI-X bus.
We failed to setup PCI devices on slot 31 and that's where the
SATA controller is for the P2020 eval board.
2010-03-23 23:46:28 +00:00
marcel
d34fe86cb5 Add definitions for a 4th PCI host controller. No Freescale processor
has all 4 implemented, but across the processors we now support all the
combinations. For example, the MPC8533 doesn't have a PCI controller
at 0xA0000, but does at 0xB0000.
2010-03-23 20:12:53 +00:00
marcel
ed3a515759 Make PCI Express host controllers functional, by:
1.  checking whether there's a link before initializing devices
    on the bus. When there's no link any access onto the bus
    will wedge the CPU.
2.  synthesizing the class & subclass so that the host controller
    appears as a standard PCI bridge, rather than a PowerPC CPU.
2010-02-01 17:51:01 +00:00
marcel
2d0b2b0c16 Use the capability pointer to indicate whether the host controller is
PCI Express, rather than a bit-field (boolean). Saving the capability
pointer this way makes access to capability-specific configuration
registers easy and efficient.
2010-02-01 17:26:58 +00:00
marcel
70c89bf0f6 Don't check the device ID. Instead, check the class, subclass and
programming I/F. New SoC designs have different device IDs, but
don't need special treatment. Consequently, we fail to probe and
attach for no other reason than not having added the device ID to
the code.

Bank on Freescale's sense of backward compatibility and assume
that if we find a host controller, we know how work with it.

This fixes detection of the PCI Express host controllers on
Freescale's QorIQ family of processors (P1, P2 and P4).
2010-01-29 20:37:12 +00:00
marcel
ca5edf0fbf Always allocate PCI/ISA interrupts as shareable so that shared
interrupts don't cause driver attach failures.
2009-11-20 17:59:50 +00:00
raj
b89a897a7d Do not use OCP85XX_LBC_OFF twice when accessing LBC registers on MPC85XX.
It turns LBC control registers were not programmed correctly on MPC85XX. We
were accessing bogus addresses as the base offset (OCP85XX_LBC_OFF) was
erroneously added during offset calculations.  Effectively the state of LBC
control registers was not altered by the kernel initialization code, but
everything worked as long as we coincided to use the same settings (LBC decode
windows) as firmware has initialized.

Submitted by:	Lukasz Wojcik
Reviewed by:	marcel
Approved by:	re (kensmith)
Obtained from:	Semihalf
2009-07-21 08:38:45 +00:00
raj
cb09752da0 More precise description of the DS1553 driver.
Pointed out by:	stas
2009-06-24 15:48:20 +00:00
raj
505fac5d7f DS1553 RTC module driver. On the MPC8555CDS system it hangs off of the LBC bus.
Obtained from:	Semihalf
2009-06-22 15:48:47 +00:00
raj
7309749fbc Integrated I2C controller driver (found in MPC85xx and other SOC parts).
Obtained from:	Freescale, Semihalf
2009-06-22 15:34:32 +00:00
raj
4438ca8fc5 Initial version of the sec(4) driver for the integrated security engine found
in Freescale system-on-chip devices.

The following algorithms and schemes are currently supported:
  - 3DES, AES, DES
  - MD5, SHA1, SHA256, SHA384, SHA512

Reviewed by:	philip
Obtained from:	Freescale, Semihalf
2009-06-06 09:37:55 +00:00
marcel
a42ef97c19 Mark the cascaded AT interrupt handler as MP safe to avoid having
it grab Giant. The next step would be to make it a filter.
2009-05-31 01:56:06 +00:00
raj
84c7ebbafb Initial support for SMP on PowerPC MPC85xx.
Tested with Freescale dual-core MPC8572DS development system.

Obtained from:	Freescale, Semihalf
2009-05-21 11:43:37 +00:00
raj
e0229d3977 Skip interleaved RAM target on MPC85xx during renitialization of the local
access windows. This eliminates hangs on systems which are configured to use
interleaved mode: prior to this fix we were simply cutting ourselves from
access to the main memory in this case.

Obtained from:	Freescale, Semihalf
2009-05-21 11:37:56 +00:00
marcel
01cb4e7961 Add suppport for ISA and ISA interrupts to make the ATA
controller in the VIA southbridge functional in the CDS
(Configurable Development System) for MPC85XX.
The embedded USB controllers look operational but the
interrupt steering is still wrong.
2009-04-24 03:51:11 +00:00
raj
3ba7d2a6ea Make MPC85xx LAW handling and reset routines aware of the MPC8548 variant.
Inspired by discussion with Alexey V Fedorov on freebsd-powerpc@.
2009-03-13 06:28:20 +00:00
raj
188fbdbc6c Extend and improve MPC85XX Local Bus management.
- Make LBC resources management self-contained: introduce explicit LBC
  resources definition (much like the OCP), provide dedicated rman for LB mem
  space.

- Full configuration of an LB chip select device: program LAW and BR/OR, map
  into KVA, handle all LB attributes (bus width, machine select, ecc,
  write protect etc).

- Factor out LAW manipulation routines into shared code, adjust OCP area
  accordingly.

- Other LBC fixes and clean-ups.

Obtained from:	Semihalf
2008-12-18 18:27:12 +00:00
raj
8bd8077930 Minor clean up of BookE/MPC85XX: iprove naming and style(9). 2008-12-17 15:31:15 +00:00
raj
d71801145e Improve MPC85XX helper routines.
- Move CCSR accessors to the shared MPC85XX area
- Simplify SVR version subfield handling
- Adjust OCP
2008-12-17 15:27:49 +00:00
marcel
b40a52a5c2 Add a driver for the Local Bus Controller.
Obtained from:	Juniper Networks, Inc.
2008-10-25 06:03:40 +00:00
marcel
caaefb5c1f Assign 0xff800000-0xffffffff to the LBC controller. That's where
the NOR flash lives by default.
2008-10-25 05:57:36 +00:00
marcel
33096044a3 Remove mfsvr():
o  The function is defined unconditionally but depends on SPR_SVR,
   which is defined conditionally.
o  spr.h defines mfspr() and mtspr(), which is no worse to use.
2008-04-27 17:13:22 +00:00
raj
e3faa1c7bc Use RSTCR for resetting the MPC8572 (the old way does not apply).
Obtained from:	Freescale, Semihalf
2008-04-26 18:03:00 +00:00
raj
c57f5d712e Introduce a dedicated file for MPC85xx-specific routines. Move cpu_reset()
there, as it's not relevant to Book-E specification, but is an implementation
detail, directly dependent on the given SoC version.
2008-04-26 17:57:29 +00:00
raj
a681868ea5 Improve handling of Local Access Windows on MPC85xx systems:
- detect number of LAWs in run time and initalize accordingly
- introduce decode windows target IDs used in MPC8572
- other minor updates

Obtained from:	Freescale, Semihalf
2008-04-26 17:47:28 +00:00
raj
8e81cff1fe Obtain TSEC h/w address from the parent bus (OCP) and not rely blindly on what
might be currently programmed into the registers.

Underlying firmware (U-Boot) would typically program MAC address into the
first unit only, and others are left uninitialized. It is now possible to
retrieve and program MAC address for all units properly, provided they were
passed on in the bootinfo metadata.

Reviewed by:	imp, marcel
Approved by:	cognet (mentor)
2008-03-12 16:32:08 +00:00
marcel
5fa24e49b2 Don't use in32() and out32() when writing to the CCSRBAR. The
in*() and out*() primitives should not be used, other than by
ISA drivers. In this case they were used for memory-mapped I/O
and were not even used in the spirit of the primitives.
2008-03-09 02:29:19 +00:00
marcel
df20e17353 Add support for the BUS_CONFIG_INTR() method to the platform and to
openpic(4). Make use of it in ocpbus(4). On the MPC85xxCDS, IRQ0:4
are active-low.
2008-03-07 22:08:43 +00:00
marcel
31c0a6bb31 o We don't have to keep track of the PIC, nor do we have to make sure
it's probed first. The PowerPC platform code deals with everything.
   As such, probe devices in order of their location in the memory map.
o  Refactor the ocpbus_alloc_resource for readability and make sure we
   set the RID in the resource as per the new convention.
2008-03-05 18:39:01 +00:00
marcel
a43ebd515c o Various fixes related to PCI Express:
- Even for the PCI Express host controller we need to use bus 0
     for configuration space accesses to devices directly on the
     host controller's bus.
   - Pass the maximum number of slots to pci_ocp_init() because the
     caller knows how many slots the bus has. Previously a PCI or
     PCI-X bus underneath a PCI Express host controller would not
     be enumerated properly.
o  Pull the interrupt routing logic out of pci_ocp_init() and into
   its own function. The logic is not quite right and is expected
   to be a bit more complex.
o  Fix/add support for PCI domains. The PCI domain is the unit
   number as per other PCI host controller drivers. As such, we
   can use logical bus numbers again and don't have to guarantee
   globally unique bus numbers. Remove pci_ocp_busnr. Return the
   highest bus number ito the caller of pci_ocp_init() now that
   we don't have a global variable anymore.
o  BAR programming fixes:
   - Non-type0 headers have at most 1 BAR, not 0.
   - First write ~0 to the BAR in question and then read back its
     size.

Obtained from: Juniper Networks (mostly)
2008-03-05 16:46:38 +00:00
marcel
6f9de25d6e Add the pic_ipi method. While here, eliminate the unused openpic_ocpbus_softc
struct.
2008-03-04 01:40:26 +00:00
raj
0757a4afb5 Initial support for Freescale PowerQUICC III MPC85xx system-on-chip family.
The PQ3 is a high performance integrated communications processing system
based on the e500 core, which is an embedded RISC processor that implements
the 32-bit Book E definition of the PowerPC architecture. For details refer
to: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8555E

This port was tested and successfully run on the following members of the PQ3
family: MPC8533, MPC8541, MPC8548, MPC8555.

The following major integrated peripherals are supported:

  * On-chip peripherals bus
  * OpenPIC interrupt controller
  * UART
  * Ethernet (TSEC)
  * Host/PCI bridge
  * QUICC engine (SCC functionality)

This commit brings the main functionality and will be followed by individual
drivers that are logically separate from this base.

Approved by:	cognet (mentor)
Obtained from:	Juniper, Semihalf
MFp4:		e500
2008-03-03 17:17:00 +00:00