Add linux/stringify.h as directly included by drivers. Remove the
definitions from compiler.h and include the new header in places
where the stringify macros are already used without linuxkpi.
I have adjusted the Copyright of the new file according to the commit
originaly adding the macros (99e690772a).
Sposnored by: The FreeBSD Foundation
MFC after: 2 weeks
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D30440
Add a placeholder struct for guid_t which is needed by ACPI consumers
in at least one wireless driver.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D30439
We need to enter the network epoch when calling into
tfb_tcp_fb_fini. I noticed this when I hit an assert
running the latest rack
Differential Revision: https://reviews.freebsd.org/D30407
Reviewed by: rrs, tuexen
Sponsored by: Netflix
Michaels testing with UDP tunneling found an issue with the push bit, which was only partly fixed
in the last commit. The problem is the left edge gets transmitted before the adjustments are done
to the send_map, this means that right edge bits must be considered to be added only if
the entire RSM is being retransmitted.
Now syzkaller also continued to find a crash, which Michael sent me the reproducer for. Turns
out that the reproducer on default (freebsd) stack made the stack get into an ack-war with itself.
After fixing the reference issues in rack the same ack-war was found in rack (and bbr). Basically
what happens is we go into the reassembly code and lose the FIN bit. The trick here is we
should not be going into the reassembly code if tlen == 0 i.e. the peer never sent you anything.
That then gets the proper action on the FIN bit but then you end up in LAST_ACK with no
timers running. This is because the usrclosed function gets called and the FIN's and such have
already been exchanged. So when we should be entering FIN_WAIT2 (or even FIN_WAIT1) we get
stuck in LAST_ACK. Fixing this means tweaking the usrclosed function so that we properly
recognize the condition and drop into FIN_WAIT2 where a timer will allow at least TP_MAXIDLE
before closing (to allow time for the peer to retransmit its FIN if the ack is lost). Setting the fast_finwait2
timer can speed this up in testing.
Reviewed by: mtuexen,rscheff
Sponsored by: Netflix Inc
Differential Revision: https://reviews.freebsd.org/D30451
The bufinit() call in fsck_ffs was moved in commit f190f9193b
from a function that is shared with fsdb to one that is private to fsck_ffs,
so add a bufinit() call in fsdb to compensate for that.
Reviewed by: mckusick
Sponsored by: Netflix
The patch in the PR largely no longer applied due to age, but
thanks to Evgeniy Khramtsov for the patches in the PR.
PR: 120024
Reported by: bcran
Approved by: blackend (mentor)
Obtained from: Evgeniy Khramtsov <evgeniy@khramtsov.org> (partly)
If copyin family of routines fault, kernel does clear PSL.AC on the
fault entry, but the AC flag of the faulted frame is kept intact. Since
onfault handler is effectively jump, AC survives until syscall exit.
Reported by: m00nbsd, via Sony
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
admbugs: 975
Since periph_runccb now handles all the polling stuff, and
xpt_polled_action is now unused and can be removed.
Sponsored by: Netflix
Reviewed by: mav@
Differential Revision: https://reviews.freebsd.org/D30394
Nothing is using the sim callout to unfreeze the queue. Remove it to
simplify the SIM. This was introduced in the original CAM commit in 1998
but setting the CAM_SIM_REL_TIMEOUT_PENDING flag was removed in 1999 in
commit 87cfaf0e1f which reworked how bus reset worked. That work was
merged just after 3.2R was released. Remove the unused residuals.
Sponsored by: Netflix
Reviewed by: scottl@, mav@
Differential Revision: https://reviews.freebsd.org/D30383
Summary:
Log the vm_fault() error in the data_abort panic so it is easier to
find the reason vm_fault() failed (e.g., invalid address).
Reviewed by: andrew
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30362
The push bit itself was also not actually being properly moved to
the right edge. The FIN bit was incorrectly on the left edge. We
fix these two issues as well as plumb in the mtu_change for
alternate stacks.
Reviewed by: mtuexen
Sponsored by: Netflix Inc
Differential Revision: https://reviews.freebsd.org/D30413
When we create an nvlist and insert it into another nvlist we must
remember to destroy it. The nvlist_add_nvlist() function makes a copy,
just like nvlist_add_string() makes a copy of the string. If we don't
we're leaking memory on every (nvlist-based) ioctl() call.
While here remove two redundant 'break' statements.
PR: 255971
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC ("Netgate")
The man page SYNOPSIS for EARLY_DRIVER_MODULE() shows that it has
an "enum sysinit_elem_order order" argument.
The actual macro in sys/bus.h does not have an order argument.
PR: 256103
Reported by: J.R. Oldroyd <fbsd at opal dot com>
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30411
These files have been unused ever since the OpenSolaris import
Sponsored by: Axcient
MFC after: 2 weeks
Reviewed By: freqlabs
Differential Revision: https://reviews.freebsd.org/D30371
Early in the arm64 pmap code we need to translate between a virtual
address and a physical address. Rather than manually walking the page
table we can ask the hardware to do it for us.
Reviewed by: kib, markj
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D30357
- Process the list of local IPs once instead of once per adapter. Add
addresses from all VNETs to the driver's list but leave hardware
updates for later when the global VNET/IFADDR list locks have been
released.
- Add address to the hardware table synchronously when a CLIP entry is
requested for an address that's not already in there.
- Provide ioctls that allow userspace tools to manage addresses in the
CLIP table.
- Add a knob (hw.cxgbe.clip_db_auto) that controls whether local IPs are
automatically added to the CLIP table or not.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
This fixes inability to start USB xfers in a case when FIFO has been
already open()-ed but no read() or poll() calls has been issued yet.
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30343
This fixes lose of evdev events after moused has been killed.
While here use bitwise operations for UMS_EVDEV_OPENED flag.
Reviewed by: hselasky
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30342
With this patch:
% dmesg | grep -i uart
uart2: <Intel Gemini Lake SIO/LPSS UART 0> mem 0xa1426000-0xa1426fff,0xa1425000-0xa1425fff irq 4 at device 24.0 on pci0
uart3: <Intel Gemini Lake SIO/LPSS UART 1> mem 0xa1424000-0xa1424fff,0xa1423000-0xa1423fff irq 5 at device 24.1 on pci0
uart4: <Intel Gemini Lake SIO/LPSS UART 2> mem 0xfea10000-0xfea10fff irq 6 at device 24.2 on pci0
uart5: <Intel Gemini Lake SIO/LPSS UART 3> mem 0xa1422000-0xa1422fff,0xa1421000-0xa1421fff irq 7 at device 24.3 on pci0
PR: 256101
Submitted by: Daniel Ponte <amigan@gmail.com>
MFC after: 1 week
Else recursive use of EPOCH(9) may cause the wrong priority to be restored.
Bump the __FreeBSD_version due to changing the thread and epoch tracker
structure.
Differential Revision: https://reviews.freebsd.org/D30375
Reviewed by: markj@
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
It turns out that, silly adrian, setting it to 64 means only two
AMPDU frames of 32 subframes each. Thus, whilst those are in-flight,
any subsequent queues frames to that node get dropped.
This ends up being pretty no bueno for performance if any receive
is also going on at that point.
Instead, set it to 128 for the time being to ensure that SOME
frames get queued in the meantime. This results in some frames
being immediately available in the software queue for transmit
when the two existing A-MPDU frames have been completely sent,
rather than the queue remaining empty until at least one is sent.
It's not the best solution - I still think I'm scheduling receive
far more often than giving time to schedule transmit work -
but at least now I'm not starving the transmit side.
Before this, a bidirectional iperf would show receive at ~ 150mbit/sec.
but the transmit side at like 10kbit/sec. With it set to 128 it's
now 150mbit/sec receive, and ~ 10mbit receive. It's better than 10kbit/sec,
but still not as far as I'd like it to be.
Tested:
* AR9380/QCA934x (TL-WDR4300 AP), Macbook pro test STA + AR9380 test STA
I've been using STA+AP modes at home for a couple years now
and I've been finding and fixing a lot of weird corner cases.
This is the eventual patchset I've landed on.
* Don't force beacon resync in STA mode if we're using sw beacon tracking.
This stops a variety of stomping issues when the STA VAP is reconfigured;
the AP hardware beacons were being stomped on!
* Use the first AP VAP to configure beacons on, rather than the first VAP.
This prevents weird behaviour in ath_beacon_config() when the hardware
is being reconfigured and the STA VAP was the first one created.
* Ensure the beacon interval / timing programming is within the AR9300
HAL bounds by masking off any flags that may have been there before
shifting the value up to 1/8 TUs rather than the 1 TU resolution the
previous chips used.
Now I don't get weird beacon reprogramming during startup, STA state
changes and hardware recovery which showed up as HI-LARIOUS beacon
configurations and STAs that would just disconnect from the AP very
frequently.
Tested:
* AR9344/AR9380, STA and AP and STA+AP modes
I've seen this fail from time to time and just hang during reset.
Instead of it just hanging, just poke it again. I've not seen it
fail in hundreds of test resets now.
Tested:
* AR9344 AP/STA configuration
