Instead of panicking when parsing an invalid ACPI SRAT table,
just ignore it, effectively disabling NUMA.
https://lists.freebsd.org/pipermail/freebsd-current/2016-May/060984.html
Reported and tested by: Bill O'Hanlon (bill.ohanlon at gmail.com)
Reviewed by: jhb
MFC after: 1 week
Relnotes: If dmesg shows "SRAT: Duplicate local APIC ID",
try updating your BIOS to fix NUMA support.
Sponsored by: Dell Inc.
Save the value of the IOV control and page size registers and restore
them (along with the VF count) in pci_cfg_save/pci_cfg_restore. This
ensures ARI remains enabled if a PF driver resets itself during the
PCI_IOV_INIT callback. This might also properly restore SRIOV state
across suspend/resume.
Reviewed by: rstone, vangyzen
Differential Revision: https://reviews.freebsd.org/D6192
While here, check if ARI was enabled by re-reading the config register
after writing it and return an error if the write fails.
Reviewed by: rstone, vangyzen
Add CRC/MOVECRC operations, as well as the TEST and STORE variants.
With these operations, a CRC32C can be computed over one or more
descriptors' source data. When the STORE operation is encountered, the
accumulated CRC32C is emitted to memory. A TEST operations triggers an
IOAT channel error if the accumulated CRC32C does not match one in
memory.
These operations are not exposed through any API yet.
Sponsored by: EMC / Isilon Storage Division
The IOAT engine can only address the low 40 bits (1 TB) of physmem via
the 'next descriptor' pointer. Restrict acceptable range given to
bus_dma_tag_create to match.
Sponsored by: EMC / Isilon Storage Division
While there, order EVFILT_VNODE notes descriptions alphabetically.
Based on submission, and tested by: Vladimir Kondratyev <wulf@cicgroup.ru>
MFC after: 2 weeks
Ease more work concerning active list, e.g. hash table etc.
Reviewed by: gallatin, rrs (earlier version)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6137
Not sure why the platform hypercall was disabled on i386, just enable it in
order to fix compilation of the PV timer on i386.
Sponsored by: Citrix Systems R&D
It will be used for the upcoming LRO hash table initialization.
And probably will be useful in other cases, when M_WAITOK can't
be used.
Reviewed by: jhb, kib
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6138
pci_remap_msix() can be used to alter the mapping of allocated
MSI-X vectors to the MSI-X table. The code had an off by one error
when adding the IRQ resources after performing a remap. This was
fatal for any vectors in the table that used the "last" valid IRQ as
those vectors were assigned a garbage IRQ value.
MFC after: 3 days
macro. Adjust the buffer clipping code to work as expected.
This prevented a number of machines in the FreeBSD.org cluster from
booting due to "ZFS: i/o error - all block copies unavailable"
after an unclean shutdown.
* Break out the 'g' phy code;
* Break out the debugging bits into a separate source file, since
some debugging prints are done in the phy code;
* Make some more chip methods in if_bwn.c public.
This brings the size of if_bwn.c down to 6,805 lines which is now
approaching managable.
This (and eventually migrating the other PHY code out) is in preparation
for adding the 11n PHY. No, the 11ac PHY (for the BCM4260 softmac part) isn't
yet open source, so we can't grow that. Yet.
This trims ~3,700 lines of code from if_bwn.c, bringing it down to a slightly
less crazy sounding 10,446 lines of code.
* Change x/a to work similar to gdb. The content of the memory is
treated as an address, printed symbolically and the address is advanced.
This way you can x/a <stack_address> and then just hit return a bunch
of times to locate useful data on the stack.
* Add x/p. The content of the memory is treated as an address and
printed as hex.
This is based on the similar commit from DragonFlyBSD without the
cosmetic changes.
Relnotes: yes
Obtained from: DragonflyBSD (Matthew Dillon)
Reference: 0624d20e86affcd708609cbf9014207537537a72
This patch adds support for restoring backlight after resume and adds models
Macbook3,1
MacbookAir5,1
MacbookAir5,2
It also incorporates fixes for bug #175260, bug #203610 and bug #203512
so those can be closed if this patch is applied.
PR: kern/209156
PR: kern/175260
PR: kern/203610
PR: kern/203512
Submitted by: Johannes Lundberg <johannes@brilliantservice.co.jp>
Implement several small improvements to the suspend/resume Xen sequence:
- Call the power_suspend_early event before stopping all processes.
- Stop all processes. This was done implicitly previously by putting all
the CPUs in a known IPI handler.
- Warm up the timecounter.
- Re-initialize the time of day register.
Sponsored by: Citrix Systems R&D
bus_get_cpus() returns a specified set of CPUs for a device. It accepts
an enum for the second parameter that indicates the type of cpuset to
request. Currently two valus are supported:
- LOCAL_CPUS (on x86 this returns all the CPUs in the package closest to
the device when DEVICE_NUMA is enabled)
- INTR_CPUS (like LOCAL_CPUS but only returns 1 SMT thread for each core)
For systems that do not support NUMA (or if it is not enabled in the kernel
config), LOCAL_CPUS fails with EINVAL. INTR_CPUS is mapped to 'all_cpus'
by default. The idea is that INTR_CPUS should always return a valid set.
Device drivers which want to use per-CPU interrupts should start using
INTR_CPUS instead of simply assigning interrupts to all available CPUs.
In the future we may wish to add tunables to control the policy of
INTR_CPUS (e.g. should it be local-only or global, should it ignore
SMT threads or not).
The x86 nexus driver exposes the internal set of interrupt CPUs from the
the x86 interrupt code via INTR_CPUS.
The ACPI bus driver and PCI bridge drivers use _PXM to return a suitable
LOCAL_CPUS set when _PXM exists and DEVICE_NUMA is enabled. They also and
the global INTR_CPUS set from the nexus driver with the per-domain set from
_PXM to generate a local INTR_CPUS set for child devices.
Reviewed by: wblock (manpage)
Differential Revision: https://reviews.freebsd.org/D5519
The current resolution of the Xen PV clock is too high, which causes an
adjustment of 5s to be applied to it. Reduce the resolution to be the same
as the RTC plus one, so it's always selected as the best source when
available on x86.
Also don't reset the clock on resume, it's pointless and discards any
previous adjustments.
Sponsoted by: Citrix Systems R&D
Dom0 should be able to set the host time. This is implemented by first
writing to the RTC (as would be done on bare metal), and then using the
XENPF_settime64 hypercall in order to force Xen to update the wallclock
shared page of all domains.
Sponsored by: Citrix Systems R&D
This is going to be used by the Xen clock on Dom0 in order to set the RTC of
the host. The current logic in atrtc_settime is moved to atrtc_set and the
unused device_t parameter is removed from the atrtc_set function call so it
can be safely used by other callers.
Sponsored by: Citrix Systems R&D
Reviewed by: kib, jhb
Differential revision: https://reviews.freebsd.org/D6067
With the removal of the usage of the VCPU_SSHOTTMR_future flag, now
all errors from xentimer_vcpu_start_timer should be considered fatal, and
the loop is no longer needed since in case of setting the timer in the past
we will get an event interrupt right away (instead of returning ETIME).
Sponsored by: Citrix Systems R&D
MFC after : 2 weeks
