Split ADC driver in two halves: ADC(analog ot digital) and
TSC(touchscreen). Touchscreen driver is fully functional
up to the point of reporting samples. This part will be added
once FreeBSD has API for touchscreen.
Tested on: Beaglebone Black + 4DCAPE-43T
Reviewed by: loos
Differential Revision: https://reviews.freebsd.org/D5847
I .. can't believe I missed this.
This showed up because the AP was TX'ing LDPC to an iwm(4) chipset,
which didn't advertise LDPC and doesn't /accept/ LDPC. Amusingly, all
the two other FreeBSD 11n parts I had tested with (AR9380, Intel 7260)
and I completely forgot to test on ye olde hardware.
That'll teach me.
Tested:
* AR9580 (AP) - Intel 7260 (STA), AR9380 (STA), Intel 6205 (STA)
This is a follow-up to r298789, which removed the B_DIRTY and B_PERSISTENT
flags. This changeset removes them from the associated %b bit description
string as well.
Reviewed by: pfg
Sponsored by: EMC / Isilon Storage Division
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c
Move checks for provider's sectorsize and mediasize into a single
location in vdev_geom_attach. Remove the zfs::vdev::taste class;
it's ok to use the regular vdev class for tasting. Consolidate guid
checks into a single location in vdev_attach_ok. Consolidate some
error handling code from vdev_geom_attach into vdev_geom_detach,
closing a resource leak of geom consumers in the process.
Reviewed by: avg
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D5974
function to error out early when no port module is present and doing
eeprom access. This also prevents error codes from filling up in
dmesg.
Sponsored by: Mellanox Technologies
Tested by: Netflix
MFC after: 1 week
So the underlying drivers can use it to select the sending queue
properly for SYN|ACK instead of rolling their own hash.
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6120
LDPC adds better transmit reliability if both ends support it.
You in theory can do both STBC and LDPC at the same time.
If I see issues I'll disable it.
* Only enable it if both ends of a connection negotiate it.
* Disable it if any rate is non-11n.
* Count both LDPC TX and STBC TX.
Tested:
* AR9380, STA mode
We don't have a separate bss node; instead we dup the first node we saw
and turn that into the BSS node. This means that action frames from
that node would be rejected.
So, check that the node is the bss node /and/ the MAC doesn't match ni_macaddr.
That's the "right" way for now to verify it's an unknown node.
This fixes handling action frames in adhoc mode, which includes negotiating
11n aggregation via ADDBA/DELBA.
This by itself isn't enough to correctly create 11n adhoc networks; but
it is required for aggregation to be negotiated.
Tested:
* AR9380, 11n adhoc mode
* broadcom 11ac adhoc (vendor platform)
Sponsored by: Eva Automation, Inc.
Arguably we should only be doing the probe/attach to children of
these devices as well.
Tested by: Michal Stanek <mst_semihalf.com> (arm64)
Differential Revision: https://reviews.freebsd.org/D6133
interested in having tunneled UDP and finding out about the
ICMP (tested by Michael Tuexen with SCTP.. soon to be using
this feature).
Differential Revision: http://reviews.freebsd.org/D5875
async_drain functionality. This as been tested in NF as well as
by Verisign. Still to do in here is to remove all the old flags. They
are currently left being maintained but probably are no longer needed.
Sponsored by: Netflix Inc.
Differential Revision: http://reviews.freebsd.org/D5924
On ARM, we can directly switch between translation tables only when
the size of the mapping for any given virtual address is the same in
the old and new translation tables. The load of new TTB and subsequent
TLB flush is not atomic operation. So speculative page table walk can
load TLB entry from new mapping while rest of TLB entries are still the
old ones. In worst case, this can lead to situation when TLB cache can
contain multiple matching TLB entries. One (from old mapping) L2 entry
for VA + 4k and one (from new mapping) L1 entry for VA.
Thus, we must switch to kernel pmap translation table as intermediate
mapping because all sizes of these (old pmap and kernel pmap) mappings
are same (or unmapped). The same is true for switch from kernel pmap
translation table to new pmap one.
Add new function gpio_alloc_intr_resource(), which allows an allocation
of interrupt resource associated to given gpio pin. It also allows to
specify interrupt configuration.
Note: This functionality is dependent on INTRNG, and must be
implemented in each GPIO controller.
Summary:
The Initial Local APIC ID is returned by CPUID function 1 (in EBX).
On AMD Family 10h systems the way that ID is built is controlled by
an MSR bit (InitApicIdCpuIdLo). BKDG instructs BIOS to set it in a
certain way, but a BIOS can be buggy. In that case the ID can confuse
tools that use it, e.g. hwloc.
For example, on a system that I own real Local APIC IDs are configured
as 0, 1, 2, 3, but IDs reported via CPUID.1 are 0, 0x40, 0x80, 0xc0.
See: https://github.com/open-mpi/hwloc/issues/183
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6060
Labels are limitted by 32 on EF10. It is not sufficient on powerful hosts.
Since only one RxQ is running over each EvQ, zero label may be used.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
PR: 208267
Differential Revision: https://reviews.freebsd.org/D6121
In principle n is only used to carry a copy of ipi_count, which is
unsigned, in the non-VIMAGE case, however ipi_count can be used
directly so it is not needed at all. Removing it makes things look
cleaner.
The "len" parameter is uint32_t, indexing it with an int may
end up in a signed integer overflow.
strlen(3) returns an integer of size_t so the corresponding index should
have that size.
MFC after: 1 week
This allows the PCI-PCI bridge driver to save a reference to the child
device in its softc.
Note that this required moving the "pci" device creation out of
acpi_pcib_attach(). Instead, acpi_pcib_attach() is renamed to
acpi_pcib_fetch_prt() as it's sole action now is to fetch the PCI
interrupt routing table.
Differential Revision: https://reviews.freebsd.org/D6021
'devctl delete' can be used to delete a device that is no longer present.
As an anti-foot-shooting measure, 'delete' will not delete a device
unless it's parent bus says it is no longer present. This can be
overridden by passing the force ('-f') flag.
Note that this command should be used with care. If a device is deleted
that is actually present it can't be resurrected unless the parent bus
device's driver supports rescans.
Differential Revision: https://reviews.freebsd.org/D6019
Rescanning a PCI bus uses the following steps:
- Fetch the current set of child devices and save it in the 'devlist'
array.
- Allocate a parallel array 'unchanged' initalized with NULL pointers.
- Scan the bus checking each slot (and each function on slots with a
multifunction device).
- If a valid function is found, look for a matching device in the 'devlist'
array. If a device is found, save the pointer in the 'unchanged' array.
If a device is not found, add a new device.
- After the scan has finished, walk the 'devlist' array deleting any
devices that do not have a matching pointer in the 'unchanged' array.
- Finally, fetch an updated set of child devices and explicitly attach any
devices that are not present in the 'unchanged' array.
This builds on the previous changes to move subclass data management into
pci_alloc_devinfo(), pci_child_added(), and bus_child_deleted().
Subclasses of the PCI bus use custom rescan logic explicitly override the
rescan method to disable rescans.
Differential Revision: https://reviews.freebsd.org/D6018
The BUS_RESCAN() method rescans a single bus device checking for devices
that have been added or removed from the bus. A new 'rescan' command is
added to devctl(8) to trigger a rescan.
Differential Revision: https://reviews.freebsd.org/D6016
In struct:gctl_req, nargs is unsigned.
In mirror:
g_mirror_syncreqs is unsigned.
In raid:
in struct:g_raid_volume, v_disks_count is unsigned.
In virstor:
in struct:g_virstor_softc, n_components is unsigned.
MFC after: 2 weeks
This greatly reduces the oqdrops under heavy workload.
For TCP send/recv test (10K concurrent connections):
oqdrops is reduced by 17% on sending side, and 57% on receiving side.
For nginx-1.8/wrk-4 1KB object test (10K concurrent connections,
4 requests/connection):
oqdrops is reduced by 44% on nginx side, and 10% on wrk side.
MFC after: 1 week
Sponsored by: Microsoft OSTC
put it off into the pr_task. This is similar to prison_free, and in fact
uses the same task even though they do something slightly different.
This resolves a LOR between the process lock and allprison_lock, which
came about in r298565.
PR: 48471
The facility_initialized and facility arrays are the same size and were
intended to be indexed the same. I believe this mismatch was just a
typo/braino in r208731.
Reported by: Coverity
CID: 1017430
Sponsored by: EMC / Isilon Storage Division
An mbpool is allocated with a contiguous array of mbpages. Freeing an
individual mbpage has never been valid. Don't do it.
This bug has been present since this code was introduced in r117624 (2003).
Reported by: Coverity
CID: 1009687
Sponsored by: EMC / Isilon Storage Division
- Factor out common part to zynq-7000.dtsi
- Fix problem with Zynq interrupts by using interrupt "triples"
in .dtsi file to differentiate between edge-triggered and
level-triggered interrupts
- cgem driver now recognizes "status" property
Submitted by: Thomas Skibo <thomasskibo@yahoo.com>
Differential Revision: https://reviews.freebsd.org/D6095
The disgusting macro INP_WLOCK_RECHECK may early-return. In
tcp_default_ctloutput() the TCP_CCALGOOPT case allocates memory before invoking
this macro, which may leak memory.
Add a _CLEANUP variant that takes a code argument to perform variable cleanup
in the early return path. Use it to free the 'pbuf' allocated in
tcp_default_ctloutput().
I am not especially happy with this macro, but I reckon it's not any worse than
INP_WLOCK_RECHECK already was.
Reported by: Coverity
CID: 1350286
Sponsored by: EMC / Isilon Storage Division
This value is u32 on disk, but assigned to an int in memory. After we do the
implicit conversion via assignment, check that the result is at least one[1]
(non-negative[2]).
1. The subsequent for-loop iterates from gpt_entries minus one, down, until
reaching zero. A negative or zero initial index results in undefined signed
integer overflow.
2. It is also used to index into arrays later.
In practice, we expected non-malicious disks to contain small positive values.
Reported by: Coverity
CID: 1223202
Sponsored by: EMC / Isilon Storage Division
The softc member 'ciss_logical' is an array of 'ciss_max_logical_bus' members.
Most of the time it is iterated correctly. This patch fixes the two instances
where the driver iterated off the end of the array.
Reported by: Coverity
CID: 1305492
Sponsored by: EMC / Isilon Storage Division
ism_stop() already destroys and frees 'sp', including a call to ic_destroy().
Don't dereference 'sp' after ism_stop() and don't invoke ic_destroy() on the
freed memory either.
Reported by: Coverity
CIDs: 1006109, 1304861
Sponsored by: EMC / Isilon Storage Division
It seems that the only way to supply dtb to loader on Zynq-based
SoCs is to manually generate dtb and place it to pre-defined location
on SD card or TFTP server where loader can pick it up. More modern
approach is to add modules/dtb/%soc% module and let installworld
target generate dtb and copy them to /boot/dtb/ where they can be
loaded by ubldr
In win2unixfn() we expand Windows 95 style long names. In some cases that
requires moving the data in the nbp->nb_buf buffer backwards to make room. That
code failed to check for overflows, leading to a stack overflow in win2unixfn().
We now check for this event, and mark the entire conversion as failed in that
case. This means we present the 8 character, dos style, name instead.
PR: 204643
Differential Revision: https://reviews.freebsd.org/D6015
It seems rn_dupedkey may be NULL, because of the NULL check inside the loop.
(Also, the rt gets assigned from rn_dupedkey and NULL checked at top of loop.)
However, the for-loop update condition happens before the top-of-loop check and
dereferences 'rt' unconditionally.
Instead, NULL-check before dereferencing.
If rn_dupedkey cannot in fact be NULL, or something else protects this, feel
free to revert this and add an ASSERT of some kind instead.
This was introduced in r191080 (2009) and moved around slightly in r293657.
Reported by: Coverity
CID: 1348482
Sponsored by: EMC / Isilon Storage Division
This is a trivial follow-up to r296308. Annotate the intentional fallthrough
to make it clear for future readers and linters.
Reported by: Coverity
CID: 1352716
Discussed with: jhb
Sponsored by: EMC / Isilon Storage Division
This is a minor follow-up to r297422, prompted by a Coverity warning. (It's
not a real defect, just a code smell.) OSD slot array reservations are an
array of pointers (void **) but were cast to void* and back unnecessarily.
Keep the correct type from reservation to use.
osd.9 is updated to match, along with a few trivial igor fixes.
Reported by: Coverity
CID: 1353811
Sponsored by: EMC / Isilon Storage Division
Introduced in r298594. There is no path before the 'vap == NULL' check where
vap is not already dereferenced.
Reported by: Coverity
CID: 1354979
Sponsored by: EMC / Isilon Storage Division
boot issues when booting with FDT. It is planned to re-enable this at a
later date.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Set MMC_CAP_4_BIT_DATA and MMC_CAP_8_BIT_DATA based on the "bus-width"
DT property and reduce maximum bus frequency from 52MHz to 50MHz to match
the capabilities of the clock provider.
Tested on a BananaPi BPI-M3 (A83T).
Since the sub-channel offers are synchronized, we can do our own
channel setup without using the sub-channel creation callback.
This paves the way to whack the sub-channel creation callback.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Since the sub-channel offers are synchronized, we can do our own
channel setup without using the sub-channel creation callback.
This paves the way to whack the sub-channel creation callback.
MFC after: 1 week
Sponsored by: Microsoft OSTC
This fixes the sub-channel offer race after Hyper-V device probe/attach
is moved to vmbus SYSINIT/attach.
MFC after: 1 week
Sponsored by: Microsoft OSTC
I'm seeing 5GHz association work but data not work until the rate drops,
so I need way more information about what's being programmed into the
transmit descriptors.
Tested:
* 7260AC, STA mode
This enables LDPC receive support for the AR9300 chips that support it.
It'll announce LDPC support via net80211.
Tested:
* AR9380, STA mode
* AR9331, (to verify the HAL didn't attach it to a chip which
doesn't support LDPC.)
TODO:
* Add in net80211 machinery to make this configurable at runtime.
Add support for the FHT_STBC_TX flag in iv_flags_ht, so it'll now obey
the per-vap ifconfig stbctx flag.
This means that we can do STBC TX on one vap and not another VAP.
(As well as STBC RX on said vap; that changes the HTCAP announcement.)
This is in preparation for exposing configuring STBC flags up to ifconfig
so STBC TX/RX can be configured at runtime.
* Set the FHT_STBC flags for TX/RX if the HT capabilitiex exist
* Clear the RX STBC HT capability flag when creating a HTCAP IE, so
we only announce it if it's configured in the FHT flags.
Tested:
* AR9331 (carambola2), AP/STA modes
Always print out the firmware panic info before restarting; don't
put it behind IWM_DEBUG.
Submitted by: bapt
Differential Revision: https://reviews.freebsd.org/D6081
This allows for the long function components encountered in www/firefox.
This constant is part of DTrace's userland ABI, so this change may not be
MFC'ed.
PR: 207735
Without this change, DTrace will refuse to load a DOF section if the
function component of any of its probes exceeds DTRACE_FUNCNAMELEN (128).
Probes in C++ programs can have very long function components. Rather than
rejecting all probes if a single probe exceeds the limit, simply skip the
invalid probe and emit a warning. This ensures that valid probes are
instantiated.
PR: 207735
MFC after: 2 weeks
When this flag is turned on, DOF and DIF validation errors are printed to
the kernel message buffer. This is useful for debugging.
Also remove the debug.dtrace.debug sysctl, which has no effect.
sysvmsg, sysvsem, and sysvshm, with the following bahavior:
inherit: allow full access to the IPC primitives. This is the same as
the current setup with allow.sysvipc is on. Jails and the base system
can see (and moduly) each other's objects, which is generally considered
a bad thing (though may be useful in some circumstances).
disable: all no access, same as the current setup with allow.sysvipc off.
new: A jail may see use the IPC objects that it has created. It also
gets its own IPC key namespace, so different jails may have their own
objects using the same key value. The parent jail (or base system) can
see the jail's IPC objects, but not its keys.
PR: 48471
Submitted by: based on work by kikuchan98@gmail.com
MFC after: 5 days
ChipCommon probing uses mapping table "chipc_devices". It calls bhnd_device_lookup,
which iterate over mapping table with end condition:
entry->desc != NULL
So if mapping table contains row with description equals to NULL, it will
stop processing of mapping. I.e. description is mandatory field and should
be not NULL.
This patch corrects mapping table for ChipCommon.
Submitted by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6088
The iwm firmware has separate commands for add, modify and delete for
various things (mac, phy context, etc.) The openbsd driver has a habit
of just completely resetting the NIC each time, which is technically
mostly okay (as long as the reset doesn't actually fail!) but it means
a lot of the code is doing ADD when it should do MODIFY.
The firmware responds in kind - it just asserts.
This fixes auth attempts that occur after the NIC has been already
configured.
(I'm sure there are more instances of this!)
Tested:
iwm0: <Intel Dual Band Wireless AC 7260> mem 0xf1400000-0xf1401fff irq 17 at device 0.0 on pci2
iwm0: revision: 0x140, firmware 25.228 (API ver. 9)
.. STA mode.
Submitted by: Masachika ISHIZUKA <ish@amail.plala.or.jp>
memory system.
RISC-V ISA has only single page table base register for both kernel
and user addresses translation. Before this commit we were using an
extra (4th) level of pagetables for switching between kernel and user
pagetables, but then realized FPGA hardware has 3-level page system
hardcoded. It is also become clear that the bitfile synthesized for
4-level system is untested/broken, so we can't use extra level for
switching.
We are now share level 1 of pagetables between kernel and user VA.
This requires to keep track of all the user pmaps created and once we
adding L1 page to kernel pmap we have to add it to all the user pmaps.
o Change the VM layout as we must have topmost bit to be 1 in the
selected page system for kernel addresses and 0 for user addresses.
o Implement pmap_kenter_device().
o Create the l3 tables for the early devmap.
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Sounds strange, but both RocketCore and lowRISC do not operate
if we set it.
All the known implementations (Spike, QEMU, RocketCore, lowRISC) uses
default machine trap vector address and operates fine with this.
Original Berkeley Boot Loader (bbl) does not set this as well.
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
There is no need to clear all the DDR memory (we only need to clear
BSS section).
I was playing with non-default version of hardware (the bitfile
synthesized for 4-level page memory system) and clearing was helpful,
but then realized support for 4-level page system is untested/broken
in both RocketCore and lowRISC.
