and IPv6. With IPv6 we may call if_addmulti() in context of processing
of an incoming packet. Usually this is interrupt context. While most
of the NIC drivers are able to reprogram multicast filters without
sleeping, some of them can't. An example is e1000 family of drivers.
With iflib conversion the problem was somewhat hidden. Iflib processes
packets in private taskqueue, so going to sleep doesn't trigger an
assertion. However, the sleep would block operation of the driver and
following incoming packets would fill the ring and eventually would
start being dropped. Enabling epoch for the full time of a packet
processing again started to trigger assertions for e1000.
Fix this problem once and for all using a general taskqueue to call
if_ioctl() method in all cases when if_addmulti() is called in a
non sleeping context. Note that nobody cares about returned value.
Reviewed by: hselasky, kib
Differential Revision: https://reviews.freebsd.org/D22154
Epoch itself doesn't rely on the counter and it is provided
merely for sleeping subsystems to check it.
- In functions that sleep use THREAD_CAN_SLEEP() to assert
correctness. With EPOCH_TRACE compiled print epoch info.
- _sleep() was a wrong place to put the assertion for epoch,
right place is sleepq_add(), as there ways to call the
latter bypassing _sleep().
- Do not increase td_no_sleeping in non-preemptible epochs.
The critical section would trigger all possible safeguards,
no sleeping counter is extraneous.
Reviewed by: kib
Revert rL349624 : Let TableGen write output only if it changed,
instead of doing so in cmake, attempt 2
Differential Revision: https://reviews.llvm.org/D55842
-----------------
As discussed on PR43385 this is causing Visual Studio msbuilds to
perpetually rebuild all tablegen generated files
Pull in r373664 from upstream llvm trunk (by Nico Weber):
Reland r349624: Let TableGen write output only if it changed, instead
of doing so in cmake
Move the write-if-changed logic behind a flag and don't pass it with
the MSVC generator. msbuild doesn't have a restat optimization, so
not doing write-if-change there doesn't have a cost, and it should
fix whatever causes PR43385.
This should fix the scenario where an incremental build from before
r353358 (the clang 9.0.0 upgrade) to r353358 or later fails to update
the timestamp of the generated lib/clang/headers/arm_fp16.h header.
After such a build, installing world from read-only source and object
directories would attempt to generate the header again, leading to
"clang-tblgen: error opening arm_fp16.h.d:Read-only file system".
Reported by: avg, np
PR: 241402
MFC after: 1 month
X-MFC-With: r353358
The source part of the review will be addressed in a different way.
Reviewed by: emaste, brooks
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21492
Add lib/libzstd to _elftoolchain_libs
tools/build/Makefile needs to create the install dir for libzstd
Since this would make the line too long, rework to use a list
in one per line format (easier to add in future)
and dispense with the .for loop
Reviewed by: emaste bapt
Differential Revision: https://reviews.freebsd.org/D220134
After r353292, netmap generic adapter on if_vlan interfaces panics on
asserting the NET_EPOCH. In more detail, this happens when
nm_os_generic_xmit_frame() is called, that is in the generic txsync
routine.
Fix the issue by entering the NET_EPOCH during the generic txsync.
We amortize the cost of entering/exiting over a whole batch of
transmissions.
PR: 241489
Reported by: Aleksandr Fedorov <aleksandr.fedorov@itglobal.com>
The bogus requirement was causing CI infrastructure (which does not mount
procfs) to skip the test. Procfs has not been needed by libexecinfo on
FreeBSD (nor NetBSD) for years. Both now use a sysctl to obtain the path to
the current process image.
X-MFC-With: r354126
stderr:
Traceback (most recent call last):
File "/usr/tests/sys/netpfil/common/pft_ping.py", line 135, in <module>
main()
File "/usr/tests/sys/netpfil/common/pft_ping.py", line 124, in main
ping(args.sendif[0], args.to[0], args)
File "/usr/tests/sys/netpfil/common/pft_ping.py", line 74, in ping
raw = sp.raw(str(PAYLOAD_MAGIC))
File "/usr/local/lib/python3.6/site-packages/scapy/compat.py", line 52, in raw
return bytes(x)
TypeError: string argument without an encoding
MFC with: r354121
Sponsored by: The FreeBSD Foundation
In order to move python2 out of the test framework to avoid py2 vs. py3
confusions upgrade the remaining test cases using scapy to work with py3.
That means only one version of scapy needs to be installed in the CI system.
It also gives a path forward for testing i386 issues observed in the CI
system with some of these tests.
Fixes are:
- Use default python from environment (which is 3.x these days).
- properly ident some lines as common for the rest of the file to avoid
errors.
- cast the calculated offset to an int as the division result is considered
a float which is not accepted input.
- when comparing payload to a magic number make sure we always add the
payload properly to the packet and do not try to compare string in
the result but convert the data payload back into an integer.
- fix print formating.
Discussed with: lwhsu, kp (taking it off his todo :)
MFC after: 2 weeks
This patch modifies the zfs_ioc_snapshot_list_next() ioctl to enable it
to take input parameters that alter the way looping through the list of
snapshots is performed. The idea here is to restrict functions that
throw away some of the snapshots returned by the ioctl to a range of
snapshots that these functions actually use. This improves efficiency
and execution speed for some rollback and send operations.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes#8077zfsonlinux/zfs@4c0883fb4a
MFC after: 2 weeks
Some dts are including dtsi that also contain a /dts-v1/ tag at the
top. GNU DTC doesn't seems to have a problem with that so fix our
dtc to behave the same.
Reviewed by: kevans
MFC after: 1 week
Drop portions that are unlit or redundant with llvm-libunwind: builtin.c,
unwind.h, and unwind_arm_ehabi_stub.c.
This code should now work with -fPIE binaries, should we choose to build any
that way.
When backtrace() array is full, signal an error so the underlying
Itanium-style C++ exception handling library (llvm-libunwind) knows to stop
tracing instead of continuing. (It should stop on its own when it finishes
unwinding, so this is mostly an extra seatbelt against an infinite loop bug
in the unwinder.)
The fill_elf_hwcap() function expects to find only cpu nodes under the
/cpus entry of the device tree. Newer versions of QEMU insert a cpu-map
node which describes the CPU topology, breaking this function. To fix
this, simply skip any non-cpu entries.
Reviewed by: markj, kp, jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22151
If neither FULL_BUF_TRACKING nor BUF_TRACKING are defined, then the body of
buf_track() becomes empty. Mark the arguments with "__unused" so the
compiler doesn't complain about unused arguments in that case.
Reported by: Bruce Leverett (Panasas)
Reviewed by: cem (on IRC)
MFC after: 1 month
Sponsored by: Panasas
[ARM] VFPv2 only supports 16 D registers.
r361845 changed the way we handle "D16" vs. "D32" targets; there used
to be a negative "d16" which removed instructions from the
instruction set, and now there's a "d32" feature which adds
instructions to the instruction set. This is good, but there was an
oversight in the implementation: the behavior of VFPv2 was changed.
In particular, the "vfp2" feature was changed to imply "d32". This is
wrong: VFPv2 only supports 16 D registers.
In practice, this means if you specify -mfpu=vfpv2, the compiler will
generate illegal instructions.
This patch gets rid of "vfp2d16" and "vfp2d16sp", and fixes "vfp2"
and "vfp2sp" so they don't imply "d32".
Differential Revision: https://reviews.llvm.org/D67375
Pull in r372187 from upstream clang trunk (by Eli Friedman):
[ARM] Update clang for removal of vfp2d16 and vfp2d16sp
Matching fix for https://reviews.llvm.org/D67375 (r372186).
Differential Revision: https://reviews.llvm.org/D67467
This should fix clang generating invalid opcodes for floating point
operations on armv6.
Requested by: mmel
MFC after: 3 days
Use a separate make variable to specify the linker script so that it is
only applied at link time and not during intermediate generation of .fwo
files.
This ensures that the .text padding inserted by the amd64 linker script
is applied to the stub module load handlers embedded in firmware
modules.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D22125
This saves 320 bytes of the precious stack space.
The only negative aspect of the change I can think of is that the
struct thread increased by 320 bytes obviously, and that 320 bytes are
not swapped out anymore. I believe the freed stack space is much more
important than that. Also, current struct thread size is 1392 bytes
on amd64, so UMA will allocate two thread structures per (4KB) slab,
which leaves a space for pcb without increasing zone memory use.
Reviewed by: alc, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D22138
The RK805 regs array was being allocated before it's required size was
known, causing the driver to use memory it didn't own. That memory
was subsequently allocated and used elsewhere causing later fatal data
aborts in rk805_map().
Whilst I'm here, add a sanity check to catch unsupported PMICs (this
shouldn't ever get hit because the probe should have failed).
Reviewed by: manu
MFC after: 1 week
Sponsored by: Google
In theory the eventhandler invoke should be in the same VNET as
the the current interface. We however cannot guarantee that for
all cases in the future.
So before checking if the fragmentation handling for this VNET
is active, switch the VNET to the VNET of the interface to always
get the one we want.
Reviewed by: hselasky
MFC after: 3 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D22153
This is a driver for the USB3 PHY present in the RK3399.
While the phy support DP (Display Port) the driver doesn't has we have
no driver to test this with for now.
All the lane and pll configuration is just magic values from rockchip.
While the manual have some info on those registers it's really hard to
understand how to calculate those values (if there is a way).
MFC after: 1 month
The change to conform to RFC 8200 for overlapping fragments now frees
the entire reassembly queue if the overlapping fragments are not an
exact match.
As a result we do see one less packet in the timeout statistics from
expiry. No other statistics change as the event is not counted.
It can be argued that we should improve the statistics counters in
that case.
This test case update should have been committed alongside the original
commit.
Pointyhat to: bz
MFC after: 3 weeks
X-MFC with: r354046
Sponsored by: Netflix
When allocating the IPv6 fragement packet queue entry we do checks
against counters and if we pass we increment one of the counters
to claim the spot. Right after that we have two cases (malloc and MAC)
which can both fail in which case we free the entry but never released
our claim on the counter. In theory this can lead to not accepting new
fragments after a long time, especially if it would be MAC "refusing"
them.
Rather than immediately subtracting the value in the error case, only
increment it after these two cases so we can no longer leak it.
MFC after: 3 weeks
Sponsored by: Netflix
Previously the code used sbttous() before microseconds comparison in one
place, sbttons() and nanoseconds in another, division by SBT_1US and
microseconds in yet another.
Now the code consistently uses multiplication by SBT_1US to convert
microseconds to sbintime_t before comparing them with periods between
calls to sbinuptime(). This is fast, this is precise enough (below
0.03%) and the periods defined by the protocol cannot overflow.
Reviewed by: imp (D22108)
MFC after: 2 weeks
