when the first mb sequence is incomplete and there are not enougn chars in
the read buffer. ws[-1] may lead to memory faults or false results, in
case the memory here contains '\n'.
2) Fix EOF checking I mess in my previos r305406 commit.
MFC after: 3 days
like we've done elsewhere, e.g., amd64.
As an optimization to the machine-independent layer, change the machine-
dependent pmap_ts_referenced() so that it updates the page's dirty field
if a modified bit is found while counting reference bits. This
opportunistic update can be performed at low cost and can eliminate the
need for some future calls to pmap_is_modified() by the machine-
independent layer.
MFC after: 3 weeks
Also switch from BSD 3-clause to 2-clause license where possible, and
consolidate duplicate 3-clause license into one.
Submitted by: Marie Helene Kvello-Aune <marieheleneka@gmail.com>
Reviewed by: cem, kp
Differential Revision: https://reviews.freebsd.org/D7764
survived multiple world and kernel builds, and of poudriere building full
package sets.
I have observed a 3% reduction in buildworld times with superpages enabled,
however further testing is needed to see if this is observed in other
workloads.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
warning:
sys/netinet/igmp.c:546:21: error: implicit conversion from 'int' to 'char' changes value from 148 to -108 [-Werror,-Wconstant-conversion]
p->ipopt_list[0] = IPOPT_RA; /* Router Alert Option */
~ ^~~~~~~~
sys/netinet/ip.h:153:19: note: expanded from macro 'IPOPT_RA'
#define IPOPT_RA 148 /* router alert */
^~~
This is because ipopt_list is an array of char, so IPOPT_RA is wrapped
to a negative value. It would be nice to change ipopt_list to an array
of u_char, but it changes the signature of the public struct ipoption,
so add an explicit cast to suppress the warning.
Reviewed by: imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7777
sys/dev/usb/serial/uplcom.c:543:29: error: implicit conversion from 'int' to 'int8_t' (aka 'signed char') changes value from 192 to -64 [-Werror,-Wconstant-conversion]
if (uplcom_pl2303_do(udev, UT_READ_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x8484, 0, 1)
~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~~~
sys/dev/usb/usb.h:179:53: note: expanded from macro 'UT_READ_VENDOR_DEVICE'
#define UT_READ_VENDOR_DEVICE (UT_READ | UT_VENDOR | UT_DEVICE)
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~
This is because UT_READ is 0x80, so the int8_t argument is wrapped to a
negative value. Fix this by using uint8_t instead.
Reviewed by: imp, hselasky
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7776
the build on i386. Leave them in the source tree for regression tests.
The asm functions were always much less accurate (by a factor of more
than 10**18 in the worst case). They were faster on old CPUs. But
with each new generation of CPUs they get relatively slower. The
double precision C version's average advantage is about a factor of 2
on Haswell.
The asm functions were already intentionally avoided in float and long
double precision on i386 and in all precisions on amd64. Float
precision and amd64 give larger advantages to the C version. The long
double precision C code and compilers' understanding of long double
precision are not so good, so the i387 is still slightly faster for
long double precision, except for the unimportant subcase of huge args
where the sub-optimal C code now somehow beats the i387 by about a
factor of 2.
versions of fmodf() amd fmodl() on i387.
fmod is similar to remainder, and the C versions are 3 to 9 times
slower than the asm versions on x86 for both, but we had the strange
mixture of all 6 variants of remainder in asm and only 1 of 6
variants of fmod in asm.
Since negative entries are managed with a LRU list, a hit requires a
modificaton.
Currently the code tries to upgrade the global lock if needed and is
forced to retry the lookup if it fails.
Provide a dedicated lock for use when the cache is only shared-locked.
Reviewed by: kib
MFC after: 1 week
This fixes bhnd(4) nvram handling on devices that map SPROM CSRs via PCI
configuration space.
The probe method previously required that a bhnd(4) device be attached to the
parent bridge; now that the bhnd_nvram device is always attached first, this
unnecessary sanity check always failed.
Approved by: adrian (mentor, implicit)
On BCM4321 chipsets, both PCI and PCIe cores are included, with one of
the cores potentially left floating.
Since the PCI core appears first in the device table, and the PCI
profiles appear first in the resource configuration tables, this resulted in
incorrectly matching and using the PCI/v1 resource configuration on PCIe
devices, rather than the correct PCIe/v1 profile.
Approved by: adrian (mentor, implicit)
Adds support for probing and initializing bhndb(4) bridge state using
the bhnd_erom API, ensuring that full bridge configuration is available
*prior* to actually attaching and enumerating the bhnd(4) child device,
allowing us to safely allocate bus-level agent/device resources during
bhnd(4) bus enumeration.
- Add a bhnd_erom_probe() method usable by bhndb(4). This is an analogue
to the existing bhnd_erom_probe_static() method, and allows the bhndb
bridge to discover the best available erom parser class prior to newbus
probing of its children.
- Add support for supplying identification hints when probing erom
devices. This is required on early EXTIF-only chipsets, where chip
identification registers are not available.
- Migrate bhndb over to the new bhnd_erom API, using bhnd_core_info
records rather than bridged bhnd(4) device_t references to determine
the bridged chipsets' capability/bridge configuration.
- The bhndb parent (e.g. if_bwn) is now required to supply a hardware
priority table to the bridge. The default table is currently sufficient
for our supported devices.
- Drop the two-pass attach approach we used for compatibility with bhndb(4) in
the bhnd(4) bus drivers, and instead perform bus enumeration immediately,
and allocate bridged per-child bus-level resources during that enumeration.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7768
The pager getpages interface allows the caller to bound the number of
readahead and readbehind pages, and vm_fault_hold() makes use of this
feature. These bounds were ignored after r305056, causing the swap pager
to potentially page in more than the specified number of pages.
Reported and reviewed by: alc
X-MFC with: r305056
This defines a new bhnd_erom_if API, providing a common interface to device
enumeration on siba(4) and bcma(4) devices, for use both in the bhndb bridge
and SoC early boot contexts, and migrates mips/broadcom over to the new API.
This also replaces the previous adhoc device enumeration support implemented
for mips/broadcom.
Migration of bhndb to the new API will be implemented in a follow-up commit.
- Defined new bhnd_erom_if interface for bhnd(4) device enumeration, along
with bcma(4) and siba(4)-specific implementations.
- Fixed a minor bug in bhndb that logged an error when we attempted to map the
full siba(4) bus space (18000000-17FFFFFF) in the siba EROM parser.
- Reverted use of the resource's start address as the ChipCommon enum_addr in
bhnd_read_chipid(). When called from bhndb, this address is found within the
host address space, resulting in an invalid bridged enum_addr.
- Added support for falling back on standard bus_activate_resource() in
bhnd_bus_generic_activate_resource(), enabling allocation of the bhnd_erom's
bhnd_resource directly from a nexus-attached bhnd(4) device.
- Removed BHND_BUS_GET_CORE_TABLE(); it has been replaced by the erom API.
- Added support for statically initializing bhnd_erom instances, for use prior
to malloc availability. The statically allocated buffer size is verified both
at runtime, and via a compile-time assertion (see BHND_EROM_STATIC_BYTES).
- bhnd_erom classes are registered within a module via a linker set, allowing
mips/broadcom to probe available EROM parser instances without creating a
strong reference to bcma/siba-specific symbols.
- Migrated mips/broadcom to bhnd_erom_if, replacing the previous MIPS-specific
device enumeration implementation.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7748
$ echo x | awk '/[[:cntrl:]]/'
x
The NUL character in cntrl class truncates the pattern, and an empty
pattern matches anything. The patch skips NUL as a quick fix.
PR: 195792
Submitted by: kdrakehp@zoho.com
Approved by: bwk@cs.princeton.edu (the author)
MFC after: 3 days
These override the kernel's definitions and do not match in some cases,
which can break scripts that use these types. With r305055, dtrace is able
to trace fields of struct mbuf's anonymous structs and unions, so there is
no need to redefine types already defined in CTF.
MFC after: 3 days
Idle page zeroing has been disabled by default on all architectures since
r170816 and has some bugs that make it seemingly unusable. Specifically,
the idle-priority pagezero thread exacerbates contention for the free page
lock, and yields the CPU without releasing it in non-preemptive kernels. The
pagezero thread also does not behave correctly when superpage reservations
are enabled: its target is a function of v_free_count, which includes
reserved-but-free pages, but it is only able to zero pages belonging to the
physical memory allocator.
Reviewed by: alc, imp, kib
Differential Revision: https://reviews.freebsd.org/D7714
sys/dev/cxgb/cxgb_sge.c:2873:44: error: implicit conversion from 'int'
to 'char' changes value from 128 to -128 [-Werror,-Wconstant-conversion]
*mtod(m, char *) = CPL_ASYNC_NOTIF;
~ ^~~~~~~~~~~~~~~
This is because CPL_ASYNC_NOTIF is 0x80, so the plain char argument is
wrapped to a negative value. Fix this by using uint8_t instead.
Reviewed by: np
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7772
This updates the snapshot from 09/30/2014 to 08/11/2016
This brings in a number of new testcases from upstream, most
notably:
- bin/cat
- lib/libc
- lib/msun
- lib/libthr
- usr.bin/sort
lib/libc/tests/stdio/open_memstream_test.c was moved to
lib/libc/tests/stdio/open_memstream2_test.c to accomodate
the new open_memstream test from NetBSD.
MFC after: 2 months
Tested on: amd64 (VMware fusion VM; various bare metal platforms); i386 (VMware fusion VM); make tinderbox
Sponsored by: EMC / Isilon Storage Division
This will make the exit info more meaningful if/when zpool create fails,
and establishes parity with the other 2 zfs acl testcases (01, 03).
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
not page aligned. To do this, use the ld script gnu ld installs on my
system.
This is imperfect: LDFLAGS_BIN and LD_FLAGS_BIN describe different
things. The loader script could be better named and take into account
other architectures. And having two different mechanisms to do
basically the same thing needs study. However, it's blocking forward
progress on lld, so I'll work in parallel to sort these out.
Differential Revision: https://reviews.freebsd.org/D7409
Reviewed by: emaste
sys/dev/ppbus/ppb_1284.c:296:46: error: implicit conversion from 'int'
to 'char' changes value from 144 to -112 [-Werror,-Wconstant-conversion]
if ((error = do_peripheral_wait(bus, SELECT | nBUSY, 0))) {
~~~~~~~~~~~~~~~~~~ ~~~~~~~^~~~~~~
sys/dev/ppbus/ppb_1284.c:785:48: error: implicit conversion from 'int'
to 'char' changes value from 240 to -16 [-Werror,-Wconstant-conversion]
if (do_1284_wait(bus, nACK | SELECT | PERROR | nBUSY,
~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~
sys/dev/ppbus/ppb_1284.c:786:29: error: implicit conversion from 'int'
to 'char' changes value from 240 to -16 [-Werror,-Wconstant-conversion]
nACK | SELECT | PERROR | nBUSY)) {
~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~
This is because nBUSY is 0x80, so the plain char argument is wrapped to
a negative value. Fix this in a minimal fashion, by using uint8_t in a
few places.
Reviewed by: emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7771
The linker script CONSTRUCTORS keyword is only meaningful "when linking
object file formats which do not support arbitrary sections, such as
ECOFF and XCOFF"[1] and is ignored for other object file formats.
LLVM's lld does not yet accept (and ignore) CONSTRUCTORS, so just remove
CONSTRUCTORS from the linker script as it has no effect.
[1] https://sourceware.org/binutils/docs/ld/Output-Section-Keywords.html
