Increase the maximum number of dynamic USB quirks. USB memory stick
devices which don't support the synchronize cache SCSI command are
likely to also not support the prevent-allow medium removal SCSI
command.
PR: 185747
cxgb: replace r273280 with a more comprehensive fix.
Poll for link state when the link is down, even for interrupt capable
PHYs.
Allow PHYs to report a dubious "partial" link. If this state is seen 3
consecutive times (each check is ~1s apart) then reset the PHY. This is
a workaround for a situation where repeatedly toggling the link from the
peer gets the AEL2005 PHY into a state where it never establishes a PCS
block lock even when everything is in order.
(or loading a dso linked to libthr.so into process which was not
linked against threading library).
MFC r276630:
Remove interposing, fix malloc, reinstall signal handlers wrappers on
libthr load.
MFC r276681:
Avoid calling internal libc function through PLT or accessing data
though GOT.
MFC r277032:
Reduce the size of the interposing table and amount of
cancellation-handling code in the libthr.
MFC note:
r276646 ("do not erronously export 'openat' symbol from rtld") is not
applicable to stable/10 yet, since PATHFDS support was not merged.
Pull in r200010 from upstream libc++ trunk (by Marshall Clow):
Rename some internal templates to avoid conflict with complier
intrinsics. __is_constructible --> __libcpp_is_constructible,
__is_nothrow_constructible --> __libcpp_is_nothrow_constructible, and
__is_nothrow_assignable --> __libcpp_is_nothrow_assignable. No
functionality change.
Pull in r206805 from upstream libc++ trunk (by Marshall Clow):
Use compiler intrinsic __is_constructible if available
This should fix building parts of world with -std=c++11 enabled.
Reported by: Oliver Hartmann <ohartman@zedat.fu-berlin.de>
Move the recursion detection code into separate function
gif_check_nesting(). Also make MTAG_GIF definition private to if_gif.c.
MFC r276907:
Restore Ethernet-within-IP Encapsulation support that was broken after
r273087. Move all checks from gif_output() into gif_transmit(). Previously
they were checked always, because if_start always called gif_output.
Now gif_transmit() can be called directly from if_bridge() code and we need
do checks here.
PR: 196646
Since the merge of file 5.21 in r276415 and r276416, stable/9 and
stable/10 cannot be built from FreeBSD 8.x. This is because the
build-tools stage requires libmagic, but lib/libmagic/config.h was
generated on head, and it now enables using the xlocale.h APIs, which
are not supported on 8.x (and on 9.x before __FreeBSD_version 900506).
See also the start of this thread on -stable:
https://lists.freebsd.org/pipermail/freebsd-stable/2015-January/081521.html
To fix this, conditionalize the use of xlocale.h APIs to make
bootstrapping from older FreeBSD versions work correctly.
Reviewed by: delphij
Differential Revision: https://reviews.freebsd.org/D1518
tcpd: complete function prototypes.
tcpd.h: add prototype for hosts_ctl
This clears up at least a build issues on mysql-server
ports. While here also replace some spaces with tabs
in our headers.
PR: 32808
PR: 42336
Fix loader's ability to read the 10.1 release PowerPC ISOs. There appears to
be some kind of problem with the version of makefs used for these disks.
There may be a better way to handle this problem, so I've set the MFC
timer for a fairly long time period.
Move the explanation for examples before the example itself. Add
numerous QEMU examples and explanations supplied by sbruno, with thanks
to Ingo Schwarze for help with the mdoc markup. Code, text, testing,
proofreading, cinematography, stunts, and the haunting theme song
supplied by sbruno.
Fixes and updates for the Linux compatibility layer:
- Remove unsupported "bus" field from "struct pci_dev".
- Fix logic inside "pci_enable_msix()" when the number of allocated
interrupts are less than the number of available interrupts.
- Update header files included from "list.h".
- Ensure that "idr_destroy()" removes all entries before destroying
the IDR root node(s).
- Set the "device->release" function so that we don't leak memory at
device destruction.
- Use FreeBSD's "log()" function for certain debug printouts.
- Put parenthesis around arguments inside the min, max, min_t and max_t macros.
- Make sure we don't leak file descriptors by dropping the extra file
reference counts done by the FreeBSD kernel when calling falloc()
and fget_unlocked().
MFC after: 1 week
Sponsored by: Mellanox Technologies
Add a constant AHCI_MAX_IRQS removing magic number
MFC r276013:
Clamp ahci max irq's to AHCI_MAX_IRQS
MFC r276016:
Return the error from ahci_setup_interrupt in ahci_attach
MFC r276019:
style (9) nits
Sponsored by: Multiplay
MFC r266971:
- Return NULL and set errno to EINVAL if size is 0 (as required by POSIX).
Update the manpage to reflect this change.
- Always set the current position to the first null-byte when opening in append
mode. This makes the implementation compatible with glibc's. Update the test
suite.
Reported by: pho
Approved by: cognet
Relnotes: yes
r275687:
Remove termcap entry reordering; install the file verbatim instead
termcap entry reordering requires ex (which is available via usr.bin/vi), which
breaks on build hosts where installworld is run with MK_VI == no (or when
make delete-old is run on ^/projects/building-blocks as vi, et al, are
removed on the branch when the knob is tweaked to => "no")
Reordering termcap was believed to improve performance, but the file is now
accessed via /etc/termcap.db, so /etc/termcap (and /usr/share/misc/termcap by
proxy) access is less preferred.
Reordering the file broke the historical comment <-> entry mapping as well,
which could muddle the purpose of entries in the file, so it could be
potentially harmful to readers in its reordered state.
Discussion took place on hackers@ here:
https://lists.freebsd.org/pipermail/freebsd-hackers/2014-December/046657.html
Discussed with: -hackers, mp
Sponsored by: EMC / Isilon Storage Division
r275692:
Fix building termcap.db when make obj is run beforehand from a clean tree by
using make variables for the filenames, which helps resolve pathing
appropriately when running cap_mkdb
Pointyhat to: me
Disable ACPI and P4TCC throttling by default, following discussion on
freebsd-current. These CPU speed control techniques are usually unhelpful
at best. For now, continue building the relevant code into GENERIC so that
it can trivially be re-enabled at runtime if anyone wants it.
Relnotes: yes
Add makefile for the "osmtest" utility. While at it:
- Fix depend target by removing a space after an "-I" inclusion option.
- Fix some minor compile issues in the "osmtest" utility.
PR: 196580
The "vt_suspend_flush_timer()" function is sometimes called locked
which prevents us from doing a "callout_drain()" call. The callout in
question has a lock associated with it and we are not freeing the
callout. That means we can use the "callout_stop()" function to
atomically stop the callback iff the "callout_stop()" function is
called locked. This patch applies proper locking to "callout_stop()"
and replaces a "callout_drain()" with a "callout_stop()".
The "cnputs_mtx" mutex must be allowed to recurse. Debug prints and/or
witness printouts in the console driver clients can cause this mutex
to recurse by calls to "printf()" from witness for example. In
particular this can happen if "debug.witness.skipspin=0" is set in the
boot environment.
Various XHCI fixes and improvements:
- Improve and fix MSI interrupt allocation, setup and release.
- Add missed flushing of data which can happen when "xhci_configure_mask()"
is called from "xhci_configure_reset_endpoint()". Ensure the 3-strikes
error feature is always enabled except for ISOCHRONOUS transfers.
- Allow systems having a page size greater than 4K to use fewer
scatter-gather XHCI TRB entries for its payload data. The XHCI
controller can handle at least 65536 bytes per scatter-gather list
entry.
Cast *path to silence clang -Wpointer-sign warning.
Indeed, instead of hiding the kern___getcwd() bug by bogus cast
in r276564, change path type to char * (pathnames are always char *).
And remove bogus casts of malloc().
kern___getcwd() internally doesn't actually use or support u_char *
paths, except to copy them to a normal char * path.
These changes are not visible to libc as libc/gen/getcwd.c misdeclares
__getcwd() as taking a plain char * path.
While here remove _SYS_SYSPROTO_H_ for __getcwd() syscall as
we always have sysproto.h.
r276765:
Update pkg-stage.sh to be compatible with pkg-1.4.x.
In 1.3.x and earlier, ABI format is, for example,
freebsd:11:x86:64.
In 1.4.x, ABI format is FreeBSD:11:amd64, and a new
configuration entry, ALTABI, is: freebsd:11:x86:64.
Export PKG_ABI and PKG_ALTABI accordingly, and if
PKG_ALTABI is set, create a symlink within the dvd
PKG_CACHEDIR so both new and old ABI directories
exist.
r276766:
Properly change directories before creating the
PKG_ALTABI -> PKG_ABI symlink.
r276820:
Print informational output when NOPORTS is set,
which would otherwise cause pkg-stage.sh to
silently exit.
r276822:
Ensure /var/run/ld-elf.so.hints exists before building
pkg(8).
r276827:
Ensure the ports directories exist for the list of
packages intended to be included on the DVD, and
remove any nonexistent ports from the final list.
Print the list of missing paths, and ensure that
DVD_PACKAGES is non-zero length (which should never
happen).
r276828:
Switch to x11/gnome3 now that x11/gnome2 no longer
exists in the ports tree.
Sponsored by: The FreeBSD Foundation
Fix a panic in zfs_rename().
this is due to a wrong dereference of a vnode when it's not locked and
can be (potentially) recycled. 'sdvp' cannot be locked on zfs_rename()
entry point because the VFS can't be sure that this scenario is
LOR-free (it might violate the parent->child lock acquisition rule).
Dereference 'tdvp' instead, which is already locked on entry, and access
'sdvp' fields only when it's safe, i.e. under ZFS_ENTER scope.
While at it, remove the usage of VOP_REALVP, as long as this is a NOP
on FreeBSD.
Fix the musb initialization sequence on AM335x.
According to http://e2e.ti.com/support/arm/sitara_arm/f/791/t/210729 the
USB reset pulse has an undocumented duration of 200ns and during this
period the module must not be acessed.
We wait for 100us to take into account for some imprecision of the early
DELAY() loop.
This fixes the eventual 'External Non-Linefetch Abort (S)' that happens at
boot while resetting the musb subsystem.
While here, enable the USB subsystem clock before the first access.
