Some of the NetBSD contributed tests are gated behind the
__HAVE_LONG_DOUBLE flag. This flag seems to be defined only for
platforms whose long double is larger than their double. I could not
find this explicitly documented anywhere, but it is implied by the
definitions in NetBSD's sys/arch/${arch}/include/math.h headers, and the
following assertion from the UBSAN code:
#ifdef __HAVE_LONG_DOUBLE
long double LD;
ASSERT(sizeof(LD) > sizeof(uint64_t));
#endif
RISC-V has 128-bit long doubles, so enable the tests on this platform,
and update the comments to better explain the purpose of this flag.
Reviewed by: ngie
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25419
OpenZFS generates events with a "zio_timestamp" field, which gets mistaken for
"timestamp" by libdevdctl due to imprecise string matching. Then later it is
assumed a "timestamp" field exists when it doesn't and an exception is thrown.
Add a space to the search string so we match exactly "timestamp" rather than
anything with that as a suffix.
Approved by: mav (mentor)
MFC after: 3 days
Sponsored by: iXsystems, Inc.
is used by the IPPROTO_SCTP level socket options SCTP_GET_PEER_ADDRESSES
and SCTP_GET_LOCAL_ADDRESSES, which are used by libc to implement
sctp_getladdrs() and sctp_getpaddrs().
These changes allow an old libc to work on a newer kernel.
for the IPPROTO_SCTP level socket options SCTP_BINDX_ADD_ADDR and
SCTP_BINDX_REM_ADDR. These socket option are intended for internal
use only to implement sctp_bindx().
This is one user of struct sctp_getaddresses less.
struct sctp_getaddresses is strange and will be changed shortly.
Unable to find an editor, vipw would give this error:
# env EDITOR=fnord vipw
vipw: pw_edit(): No such file or directory
vigr or crontab do better:
# env EDITOR=fnord crontab -e
crontab: no crontab for root - using an empty one
crontab: fnord: No such file or directory
crontab: "fnord" exited with status 1
After this change, vipw behaves more like vigr or crontab:
# env EDITOR=fnord vipw
vipw: fnord: No such file or directory
vipw: "fnord" exited with status 1
Reviewed by: rpokala, emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25369
The ELF notes compiled in C were placed in a section with the wrong type
(SHT_PROGBITS instead of SHT_NOTE). Previously, sed was used on the
generated assembly to rewrite the section type. Instead, write the notes
in assembly which permits setting the correct section type directly.
While here, move inline assembly entry points out of C and into assembly
for aarch64, arm, and riscv.
Reviewed by: kib
Tested on: amd64 (cirrus-ci), riscv64
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25211
- Add STANDARDS and HISTORY sections within the appropriate manpages
- Mention two USENIX papers within kqueue(2) and strlcpy(3)
Reviewed by: bcr (mentor)
Approved by: bcr (mentor)
Obtained from: NetBSD
MFC after: 7 days
Differential Revision: https://reviews.freebsd.org/D24650
The loader.ve.hashed list can easily exceed KENV_MVALLEN.
If so, bump kenv_mvallen to a multiple of KENV_MVALLEN to
accommodate the value.
Reviewed by: stevek
MFC after: 1 week
libc cannot assume that aligned_alloc and free come from jemalloc, or that
any application providing its own malloc and free is actually providing
aligned_alloc.
Switch back to malloc and just make sure we're passing a properly aligned
stack into rfork_thread, as an application perhaps can't reasonably replace
just malloc or just free without headaches.
This unbreaks ksh93 after r361996, which provides malloc/free but no
aligned_alloc.
Reported by: freqlabs
Diagnosed by: Andrew Gierth <andrew_tao173.riddles.org.uk>
X-MFC-With: r361996
pthread_get_name_np() and pthread_set_name_np().
This re-applies r361770 after compatibility fixes.
Reviewed by: antoine, jkim, markj
Tested by: antoine (exp-run)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25117
Some environments in which execvPe may be called have a limited amount of
stack available. Currently, it avoidably allocates a segment on the stack
large enough to hold PATH so that it may be mutated and use strsep() for
easy parsing. This logic is now rewritten to just operate on the immutable
string passed in and do the necessary math to extract individual paths,
since it will be copying out those segments to another buffer anyways and
piecing them together with the name for a full path.
Additional size is also needed for the stack in posix_spawnp(), because it
may need to push all of argv to the stack and rebuild the command with sh in
front of it. We'll make sure it's properly aligned for the new thread, but
future work should likely make rfork_thread a little easier to use by
ensuring proper alignment.
Some trivial cleanup has been done with a couple of error writes, moving
strings into char arrays for use with the less fragile sizeof().
Reported by: Andrew Gierth <andrew_tao173.riddles.org.uk>
Reviewed by: jilles, kib, Andrew Gierth
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25038
If execve fails with ENOEXEC, execvp is expected to rebuild the command
with /bin/sh instead and try again.
The previous version did this, but overlooked two details:
argv[0] can conceivably be NULL, in which case memp would never get
terminated. We must allocate no less than three * sizeof(char *) so we can
properly terminate at all times. For the non-NULL argv standard case, we
count all the non-NULL elements and actually skip the first argument, so we
end up capturing the NULL terminator in our bcopy().
The second detail is that the spec is actually worded such that we should
have been preserving argv[0] as passed to execvp:
"[...] executed command shall be as if the process invoked the sh utility
using execl() as follows:
execl(<shell path>, arg0, file, arg1, ..., (char *)0);
where <shell path> is an unspecified pathname for the sh utility, file is
the process image file, and for execvp(), where arg0, arg1, and so on
correspond to the values passed to execvp() in argv[0], argv[1], and so on."
So we make this change at this time as well, while we're already touching
it. We decidedly can't preserve a NULL argv[0] as this would be incredibly,
incredibly fragile, so we retain our legacy behavior of using "sh" for
argv[] in this specific instance.
Some light tests are added to try and detect some components of handling the
ENOEXEC fallback; posix_spawnp_enoexec_fallback_null_argv0 is likely not
100% reliable, but it at least won't raise false-alarms and it did result in
useful failures with pre-change libc on my machine.
This is a secondary change in D25038.
Reported by: Andrew Gierth <andrew_tao173.riddles.org.uk>
Reviewed by: jilles, kib, Andrew Gierth
MFC after: 1 week
Specifically, add LIBUSB_CLASS_PHYSICAL and the libusb_has_capability API.
Descriptions and functionality for these derived from the
documentation at [0]. The current set of capabilities are all supported by
libusb.
These were detected as missing after updating net/freerdp to 2.1.1, which
attempted to use both.
[0] http://libusb.sourceforge.net/api-1.0/group__libusb__misc.html
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25194
Comparing the object files produced by GNU as 2.17.50 and Clang IAS
shows many immaterial changes in strtab etc., and one material change
in .text:
1bac: 4c 8b 4f 18 mov 0x18(%rdi),%r9
1bb0: eb 0e jmp 1bc0 <Skein1024_block_loop>
- 1bb2: 66 66 2e 0f 1f 84 00 data16 nopw %cs:0x0(%rax,%rax,1)
- 1bb9: 00 00 00 00
- 1bbd: 0f 1f 00 nopl (%rax)
+ 1bb2: 66 2e 0f 1f 84 00 00 nopw %cs:0x0(%rax,%rax,1)
+ 1bb9: 00 00 00
+ 1bbc: 0f 1f 40 00 nopl 0x0(%rax)
0000000000001bc0 <Skein1024_block_loop>:
Skein1024_block_loop():
1bc0: 4c 8b 47 10 mov 0x10(%rdi),%r8
1bc4: 4c 03 85 c0 00 00 00 add 0xc0(%rbp),%r8
That is, GNU as and Clang's integrated assembler use different multi-
byte NOPs for alignment (GNU as emits an 11 byte NOP + a 3 byte NOP,
while Clang IAS emits a 10 byte NOP + a 4 byte NOP).
Dependency cleanup hacks are not required, because we do not create
.depend files from GNU as.
Reviewed by: allanjude, arichardson, cem, tsoome
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8434
r360979 erroneously assumed that the lowest mapping in an address space
would be a file mapping, but of course this is not true in general.
Reported and tested by: Frederic Chardon <chardon.frederic@gmail.com>
MFC after: 3 days
Since we had a .set reorder, the nop after the "jal" was being placed after
the delay slot, resulting in two nops.
While changing this code also guard the .set noreorder with .set push/pop
and use $zero as the cpsetup save register since we don't need to save $gp.
Reviewed By: jhb
Differential Revision: https://reviews.freebsd.org/D25025
Copying the approach chosen in r309412. This fixes building the libc tests
on a macOS host since the macOS /bin/dd binary does not support status=none.
As there only seem to be two uses, this commit changes the two Makefiles.
If this becomes more common, we could also add a wrapper bootstrap script
that ignores status= and forwards the remaining args to the real dd.
Another alternative would be to remove the status flag and pipe stderr to
/dev/null, but them we lose error messages.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D24785
description of items residing in a so-called union. FreeBSD currently
only supports 4 such pop levels.
If the push level is not restored within the processing of the same
HID item, an invalid memory location may be used for subsequent HID
item processing.
Verify that the push level is always valid when processing HID items.
Reported by: Andy Nguyen (Google)
MFC after: 3 days
Sponsored by: Mellanox Technologies
At this point, AES is the more common name for Rijndael128. setkey(8)
will still accept the old name, and old constants remain for
compatiblity.
Reviewed by: cem, bcr (manpages)
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24964
This commit adds the priv(9) that waters down the sysctl to make it only
allow read(2) of a dirfd by the system root. Jailed root is not allowed, but
jail policy and superuser policy will abstain from allowing/denying it so
that a MAC module can fully control the policy.
Such a MAC module has been written, and can be found at:
https://people.freebsd.org/~kevans/mac_read_dir-0.1.0.tar.gz
It is expected that the MAC module won't be needed by many, as most only
need to do such diagnostics that require this behavior as system root
anyways. Interested parties are welcome to grab the MAC module above and
create a port or locally integrate it, and with enough support it could see
introduction to base. As noted in mac_read_dir.c, it is released under the
BSD 2 clause license and allows the restrictions to be lifted for only
jailed root or for all unprivileged users.
PR: 246412
Reviewed by: mckusick, kib, emaste, jilles, cy, phk, imp (all previous)
Reviewed by: rgrimes (latest version)
Differential Revision: https://reviews.freebsd.org/D24596
Historically, we've allowed read() of a directory and some filesystems will
accommodate (e.g. ufs/ffs, msdosfs). From the history department staffed by
Warner: <<EOF
pdp-7 unix seemed to allow reading directories, but they were weird, special
things there so I'm unsure (my pdp-7 assembler sucks).
1st Edition's sources are lost, mostly. The kernel allows it. The
reconstructed sources from 2nd or 3rd edition read it though.
V6 to V7 changed the filesystem format, and should have been a warning, but
reading directories weren't materially changed.
4.1b BSD introduced readdir because of UFS. UFS broke all directory reading
programs in 1983. ls, du, find, etc all had to be rewritten. readdir() and
friends were introduced here.
SysVr3 picked up readdir() in 1987 for the AT&T fork of Unix. SysVr4 updated
all the directory reading programs in 1988 because different filesystem
types were introduced.
In the 90s, these interfaces became completely ubiquitous as PDP-11s running
V7 faded from view and all the folks that initially started on V7 upgraded
to SysV. Linux never supported this (though I've not done the software
archeology to check) because it has always had a pathological diversity of
filesystems.
EOF
Disallowing read(2) on a directory has the side-effect of masking
application bugs from relying on other implementation's behavior
(e.g. Linux) of rejecting these with EISDIR across the board, but allowing
it has been a vector for at least one stack disclosure bug in the past[0].
By POSIX, this is implementation-defined whether read() handles directories
or not. Popular implementations have chosen to reject them, and this seems
sensible: the data you're reading from a directory is not structured in some
unified way across filesystem implementations like with readdir(2), so it is
impossible for applications to portably rely on this.
With this patch, we will reject most read(2) of a dirfd with EISDIR. Users
that know what they're doing can conscientiously set
bsd.security.allow_read_dir=1 to allow read(2) of directories, as it has
proven useful for debugging or recovery. A future commit will further limit
the sysctl to allow only the system root to read(2) directories, to make it
at least relatively safe to leave on for longer periods of time.
While we're adding logic pertaining to directory vnodes to vn_io_fault, an
additional assertion has also been added to ensure that we're not reaching
vn_io_fault with any write request on a directory vnode. Such request would
be a logical error in the kernel, and must be debugged rather than allowing
it to potentially silently error out.
Commented out shell aliases have been placed in root's chsrc/shrc to promote
awareness that grep may become noisy after this change, depending on your
usage.
A tentative MFC plan has been put together to try and make it as trivial as
possible to identify issues and collect reports; note that this will be
strongly re-evaluated. Tentatively, I will MFC this knob with the default as
it is in HEAD to improve our odds of actually getting reports. The future
priv(9) to further restrict the sysctl WILL NOT BE MERGED BACK, so the knob
will be a faithful reversion on stable/12. We will go into the merge
acknowledging that the sysctl default may be flipped back to restore
historical behavior at *any* point if it's warranted.
[0] https://www.freebsd.org/security/advisories/FreeBSD-SA-19:10.ufs.asc
PR: 246412
Reviewed by: mckusick, kib, emaste, jilles, cy, phk, imp (all previous)
Reviewed by: rgrimes (latest version)
MFC after: 1 month (note the MFC plan mentioned above)
Relnotes: absolutely, but will amend previous RELNOTES entry
Differential Revision: https://reviews.freebsd.org/D24596
for pthread_get_name_np() and pthread_set_name_np(), to be
compatible with Linux.
PR: 238404
Proposed and reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25117
One of the error descriptions referred to permissions; in context the
meaning was probably clear, but the prot values are properly called
protections.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The service handler for fileargs_open() tries to pre-open multiple files
and pass descriptors for each back to the sandboxed process in a single
message. This is to amortize the cost of round-trips between the two
processes.
The service process adds a "cache" nvlist to the reply to "open",
containing file descriptors for pre-opened files. However, when adding
that nvlist to the reply, it was making a copy, effectively leaking the
cached descriptors.
While here, fix spelling in a local variable name.
PR: 241226
Reviewed by: oshogbo
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25095
Because the install location was hardcoded in the Makefile as
/usr/lib/libxo/encoder, the lib32 version was installed over the native
version. Replace /usr/lib with ${LIBDIR}.
Also define SHLIB_NAME instead of LIB + FILES. This prevents building a
static library.
MFC after: 2 weeks
r316063 installed pf's embedded libevent as a private lib, with headers
in /usr/include/private/event. Unfortunately we also have a copy of
libevent v2 included in ntp, which needed to be updated for compatibility
with OpenSSL 1.1.
As unadorned 'libevent' generally refers to libevent v2, be explicit that
this one is libevent v1.
Reviewed by: vangyzen (earlier)
Differential Revision: https://reviews.freebsd.org/D17275
The revision caused libprocstat to have two undefined symbols:
- __start_set_pcpu
- __stop_set_pcpu
probably because of __GLOBL() used in sys/pcpu.h under _KERNEL.
The symbols are not accessed by anything and the linker in base does not
complain about them, but some ports are failing to build.
Hack around the problem by providing definitions for those symbols.
Probably there is a better solution, but I could not think of it yet.
Reported by: zeising
MFC after: 3 days
X-MFC with: r361363
Sponsored by: Panzura
As usual, the full release notes are found on Github:
https://github.com/facebook/zstd/releases/tag/v1.4.5
Notable changes include:
* Improved decompress performance on amd64 and arm (5-10%
and 15-50%, respectively).
* '--patch-from' zstd(1) CLI option, which provides something like a very fast
version of bspatch(1) with slightly worse compression. See release notes.
In this update, I dropped the 3-year old -O0 workaround for an LLVM ARM bug;
the bug was fixed in LLVM SVN in 2017, but we didn't remove this workaround
from our tree until now.
MFC after: I won't, but feel free
Relnotes: yes
First of all, znode_phys_t hasn't been used for storing file attributes
for a long time now. Modern ZFS versions use a System Attribute table
with a flexible layout. But more importantly all the required
information is available in znode_t itself.
It's not easy to include zfs_znode.h in userland without breaking code
because the most interesting parts of the header are kernel-only. And
hardcoding field offsets is too fragile. So, I created a new
compilation unit that includes zfs_znode.h using some mild kludges to
get it and its dependencies to compile in userland. The compilation
unit exports interesting field offsets and does not have any other code.
PR: 194117
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D24941
Keep link_map l_addr binary layout compatible, rename l_addr to l_base
where rtld returns map base. Provide relocbase in newly added l_addr.
This effectively reverts the patch to the initial version of D24918.
Reported by: antoine (portmgr)
Reviewed by: jhb, markj
Tested by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24946
Update unbound 1.9.6 --> 1.10.1.
Bug Fixes:
- CVE-2020-12662 Unbound can be tricked into amplifying an incoming
query into a large number of queries directed to a target.
- CVE-2020-12663 Malformed answers from upstream name servers can be
used to make Unbound unresponsive.
Reported by: emaste
MFC after: 3 days
Relnotes: yes
Security: CVE-2020-12662, CVE-2020-12663
This seems to have been broken since r247602 (from year 2013!).
Can be easily tested with
fstat -N /boot/kernel/kernel -M /var/crash/vmcore.last
MFC after: 1 week
Sponsored by: Panzura
Comparing fsid_t objects requires internal knowledge of the fsid structure
and yet this is duplicated across a number of places in the code.
Simplify by creating a fsidcmp function (macro).
Reviewed by: mjg, rmacklem
Approved by: mav (mentor)
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D24749
It previously returned the object map base address, while all other
ELF operating systems return load offset, i.e. the difference between
map base and the link base.
Explain the meaning of the field in the man page.
Stop filling the mips-only l_offs member, which is apparently unused.
PR: 246561
Requested by: Damjan Jovanovic <damjan.jov@gmail.com>
Reviewed by: emaste, jhb, cem (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24918
Update libarchive to 3.4.3
Relevant vendor changes:
PR #1352: support negative zstd compression levels
PR #1359: improve zstd version checking
PR #1348: support RHT.security.selinux from GNU tar
PR #1357: support for archives compressed with pzstd
PR #1367: fix issues in acl tests
PR #1372: child handling cleanup
PR #1378: fix memory leak from passphrase callback
The CU-SeeMe videoconferencing client and associated protocol is at this
point a historical artifact; there is no need to retain support for this
protocol today.
Reviewed by: philip, markj, allanjude
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24790
Expose the special kernel LAPIC, IOAPIC, and HPET devices to userspace
for use in, e.g., fallback instruction emulation (when userspace has a
newer instruction decode/emulation layer than the kernel vmm(4)).
Plumb the ioctl through libvmmapi and register the memory ranges in
bhyve(8).
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D24525
netgraph(3) points to #include <netgraph/netgraph.h>, which is kernel only.
The man page refers to the user-space part of the netgraph module, which is
located in <netgraph.h>.
Submitted by: lutz_donnerhacke.de
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D23814
We were accidentally using stfd instead of stw in our SAVEGPR macro.
This has almost certainly been causing crashes when compiling with -Os.
Reviewed by: jhibbits (in irc)
MFC after: 3 days
Sponsored by: Tag1 Consulting, Inc.
kve_offset gives the offset into the backing file, which is not what we
want since different segments may map the same page. Use the base of
the mapping to determine the offset exported by librtld_db instead.
PR: 244732
Reported by: Jenkins, Nicolò Mazzucato <nicomazz97@gmail.com>
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Assume gcc is at least 6.4, the oldest xtoolchain in the ports tree.
Assume clang is at least 6, which was in 11.2-RELEASE. Drop conditions
for older compilers.
Reviewed by: imp (earlier version), emaste, jhb
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24802
Summary:
In r209294 kib added -fno-asynchronous-unwind-tables to the compile
flags for the GNU C startup components. This was done to work around a
BFD ld assertion, "no .eh_frame_hdr table will be created", which is
produced because of the layout of the startup objects.
Add the same flag to lib/csu too, for the same reason. And similarly to
r209294, also add -fno-omit-frame-pointer.
This is primarily meant to quickly MFC to stable/11, so it can end up in
the 11.4 release, as a fix for https://bugs.freebsd.org/246322.
PR: 246322
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D24797
functionality first appeared in FreeBSD.
Submitted by: Gordon Bergling gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24677
Attempted to clean up the language around "this is a malloc'd object." May be
passed as a parameter to free(3) is a bit obtuse.
Sponsored by: Dell EMC Isilon
Save and restore (also known as suspend and resume) permits a snapshot
to be taken of a guest's state that can later be resumed. In the
current implementation, bhyve(8) creates a UNIX domain socket that is
used by bhyvectl(8) to send a request to save a snapshot (and
optionally exit after the snapshot has been taken). A snapshot
currently consists of two files: the first holds a copy of guest RAM,
and the second file holds other guest state such as vCPU register
values and device model state.
To resume a guest, bhyve(8) must be started with a matching pair of
command line arguments to instantiate the same set of device models as
well as a pointer to the saved snapshot.
While the current implementation is useful for several uses cases, it
has a few limitations. The file format for saving the guest state is
tied to the ABI of internal bhyve structures and is not
self-describing (in that it does not communicate the set of device
models present in the system). In addition, the state saved for some
device models closely matches the internal data structures which might
prove a challenge for compatibility of snapshot files across a range
of bhyve versions. The file format also does not currently support
versioning of individual chunks of state. As a result, the current
file format is not a fixed binary format and future revisions to save
and restore will break binary compatiblity of snapshot files. The
goal is to move to a more flexible format that adds versioning,
etc. and at that point to commit to providing a reasonable level of
compatibility. As a result, the current implementation is not enabled
by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option
for userland builds, and the kernel option BHYVE_SHAPSHOT.
Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai
Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz
Relnotes: yes
Sponsored by: University Politehnica of Bucharest
Sponsored by: Matthew Grooms (student scholarships)
Sponsored by: iXsystems
Differential Revision: https://reviews.freebsd.org/D19495
Examples of depecrated algorithms in manual pages and sample configs
are updated where relevant. I removed the one example of combining
ESP and AH (vs using a cipher and auth in ESP) as RFC 8221 says this
combination is NOT RECOMMENDED.
Specifically, this removes support for the following ciphers:
- des-cbc
- 3des-cbc
- blowfish-cbc
- cast128-cbc
- des-deriv
- des-32iv
- camellia-cbc
This also removes support for the following authentication algorithms:
- hmac-md5
- keyed-md5
- keyed-sha1
- hmac-ripemd160
Reviewed by: cem, gnn (older verisons)
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24342
This option was added as a transition aide when symbol versioning was
first added. It was enabled by default in 2007 and is supported even
by the old GPLv2 binutils. Trying to disable it currently fails to
build in libc and at this point it isn't worth fixing the build.
Reported by: Michael Dexter
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24637
We do not want to support bootstrapping lua modules, so ensure that
require will fail by providing a nonexistent path.
Reviewed by: kevans
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24610
sendto(2), sendmsg(2) and sendmmsg(2) return ENOTCONN if a destination
address is specified and the socket is not connected and the socket
protocol does not automatically connect ("implied connect"). Document
that. Also document the fact that the destination address is ignored
for connection-mode sockets if the socket is already connected.
PR: 245817
Submitted by: Erik Inge Bolsø <knan-bfo@modirum.com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24530
Contrary to the kevent man page, EV_EOF on a fifo is not cleared by
EV_CLEAR. Modify the read and write filters to clear EV_EOF when the
fifo's PIPE_EOF flag is clear, and update the man page to document the
new behaviour.
Modify the write filter to return the amount of buffer space available
even if no readers are present. This matches the behaviour for sockets.
When reading from a pipe, only call pipeselwakeup() if some data was
actually read. This prevents the continuous re-triggering of a
EVFILT_READ event on EOF when in edge-triggered mode.
PR: 203366, 224615
Submitted by: Jan Kokemüller <jan.kokemueller@gmail.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24528
In r326576 ("use @@@ instead of @@ in __sym_default"), an earlier version of
the phabricator-discussed patch was inadvertently committed. The commit
message claims that @@@ means that weak is not needed, but that was due to a
misunderstanding of the use of weak symbols in this context by the submitted
in the first draft of the patch; the description text was not updated to
match the discussion. As discussed in phabricator, weak is needed for
symbol interposing because of the behavior of our rtld, and is widely used
elsewhere in libc.
This partial revert restores the approved version of the patch and permits
symbol interposing for openat.
Reported by: Raymond Ramsden <rramsden AT isilon.com>
Reviewed by: dim, emaste, kib (2017)
Discussed with: kib (2020)
Differential Revision: https://reviews.freebsd.org/D11653
Revert r354606 to restore r354605.
Apply one line from jemalloc commit d01b425e5d1e1 in hash_x86_128()
to fix the build with gcc, which only allows a fallthrough attribute
to appear before a case or default label.
Submitted by: jasone in r354605
Discussed with: jasone
Reviewed by: bdrewery
MFC after: never, due to gcc 4.2.1
Relnotes: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24522
If the index we're trying to convert is 0 we can avoid a potentially
expensive call to getifaddrs(). No interface has an ifindex of zero, so
we can handle this as an error: set the errno to ENXIO and return NULL.
Submitted by: Nick Rogers
Reviewed by: lutz at donnerhacke.de
MFC after: 2 weeks
Sponsored by: RG Nets
Differential Revision: https://reviews.freebsd.org/D24524
In the below-referenced PR, a case is attached of a simple reproducer that
exhibits suboptimal behavior: EVFILT_READ and EVFILT_WRITE being set in the
same kevent(2) call will only honor the first one. This is, in-fact, how
it's supposed to work.
A read of the manpage leads me to believe we could be more clear about this;
right now there's a logical leap to make in the relevant statement: "When
passed as input, it forces EV_ERROR to always be returned." -- the logical
leap being that this indicates the caller should have allocated space for
the change to be returned with EV_ERROR indicated in the events, or
subsequent filters will get dropped on the floor.
Another possible workaround that accomplishes similar effect without needing
space for all events is just setting EV_RECEIPT on the final change being
passed in; if any errored before it, the kqueue would not be drained. If we
made it to the final change with EV_RECEIPT set, then we would return that
one with EV_ERROR and still not drain the kqueue. This would seem to not be
all that advisable.
PR: 229741
MFC after: 1 week
This avoids passing garbage to sigprocmask() if the jump buffer is
invalid.
Reviewed by: mhorne
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24483
While here, replace the array of mapping structures with an array of
string pointers where the index is the capability value.
Submitted by: Rob Fairbanks <rob.fx907@gmail.com>
Reviewed by: rgrimes
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24289
According to the upstream man page (which we don't install), none of
libauditd's symbols are intended to be public. Also, I can't find any
evidence for a port that uses libauditd. Therefore, we should treat it like
other such libraries and use PRIVATELIB.
Reported by: phk
Reviewed by: cem, emaste
MFC after: 2 weeks
This saves a system call and avoids one of the (relatively rare) cases
of the kernel exporting pointers via sysctl.
As a temporary measure, keep the sysctl support to allow limited
compatability with old kernels.
Fail gracefully if ps_strings can't be found (should never happen).
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24407
This will be used by setproctitle().
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24407
This pattern is used in callbacks with void * data arguments and seems
both relatively uncommon and relatively harmless. Silence the warning
by casting through uintptr_t.
This warning is on by default in Clang 11.
Reviewed by: arichardson
Obtained from: CheriBSD (partial)
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24425
This removes support for reading and writing volumes using the
following algorithms:
- Triple DES
- Blowfish
- MD5 HMAC integrity
In addition, this commit adds an explicit whitelist of supported
algorithms to give a better error message when an invalid or
unsupported algorithm is used by an existing volume.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24343
Include a temporarily compatibility shim as well for kernels predating
close_range, since closefrom is used in some critical areas.
Reviewed by: markj (previous version), kib
Differential Revision: https://reviews.freebsd.org/D24399
sonewconn() emits debug-level messages when a listen socket's queue
overflows. Currently, sonewconn() tracks overflows on a global basis. It
will only log one message every 60 seconds, regardless of how many sockets
experience overflows. And, when it next logs at the end of the 60 seconds,
it records a single message referencing a single PCB with the total number
of overflows across all sockets.
This commit changes to per-socket overflow tracking. The code will now
log one message every 60 seconds per socket. And, the code will provide
per-socket queue length and overflow counts. It also provides a way to
change the period between log messages using a sysctl.
Reviewed by: jhb (previous version), bcr (manpages)
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D24316
This had been introduced to ease any pain for using slightly older kernels
with a newer libc, e.g., for bisecting a kernel across the introduction of
shm_open2(2). 6 months has passed, retire the fallback and let shm_open()
unconditionally call shm_open2().
Stale includes are removed as well.
arc4random.c: In the incredibly unbelievable circumstance where
_rs_init() fails to allocate pages, don't call abort() because of
corefile data leakage concerns, but simply _exit(). The reasoning
is _rs_init() will only fail if someone finds a way to apply
specific pressure against this failure point, for the purpose of
leaking information into a core which they can read. We don't
need a corefile in this instance to debug that. So take this
"lever" away from whoever in the future wants to do that.
arc4random.3: reference random(4)
arc4random_uniform.c: include stdint.h over sys/types.h
close_range(min, max, flags) allows for a range of descriptors to be
closed. The Python folk have indicated that they would much prefer this
interface to closefrom(2), as the case may be that they/someone have special
fds dup'd to higher in the range and they can't necessarily closefrom(min)
because they don't want to hit the upper range, but relocating them to lower
isn't necessarily feasible.
sys_closefrom has been rewritten to use kern_close_range() using ~0U to
indicate closing to the end of the range. This was chosen rather than
requiring callers of kern_close_range() to hold FILEDESC_SLOCK across the
call to kern_close_range for simplicity.
The flags argument of close_range(2) is currently unused, so any flags set
is currently EINVAL. It was added to the interface in Linux so that future
flags could be added for, e.g., "halt on first error" and things of this
nature.
This patch is based on a syscall of the same design that is expected to be
merged into Linux.
Reviewed by: kib, markj, vangyzen (all slightly earlier revisions)
Differential Revision: https://reviews.freebsd.org/D21627
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
This is an application of the kernel overflow fix from r357948 to
userspace, based on the algorithm developed by Bruce Evans. To keep
the ABI of the vds_timekeep stable, instead of adding the large_delta
member, MSB of both multipliers are added to quickly estimate the overflow.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
On slow platforms, it helps to spread the hashing load
over time so that tftp does not timeout.
Also, some .4th files are too big to fit in cache of pkgfs,
so increase cache size and ensure fully populated.
Reviewed by: stevek
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24287
We must wrap C declarations in __BEGIN / __END_DECLS to avoid C++ name-mangling
of the declaration when including the C header; name-mangling causes the linker
to attempt to locate the wrong (C++ ABI) symbol name.
Reviewed by: markj, oshogbo (earlier version both)
Differential Revision: https://reviews.freebsd.org/D24323
instead of sprinkling them out over many disjoint files. This is a follow-up
to achieve the same goal in an incomplete rev.348521.
Approved by: imp
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D20520
No functional change. Minor API change that is nicer for consumers. ABI is
identical; the routine never needed to modify the pointed to value.
Reviewed by: emaste, markj
Differential Revision: https://reviews.freebsd.org/D24319
For head/, this will remain eternally default-on to maintain the status quo.
For stable/ branches, it should be flipped to default-off to maintain the
status quo.
There's value in being able to flip it one way or the other easily on head
or stable branches, whether you want to gain some performance back on head/
(for machines there's little chance you'll actually hit an assertion) or
potentially diagnose a problem with the version of llvm on an older branch.
Currently, stable branches get the CFLAGS+= -ndebug line uncommented; going
forward, they will instead have the default of LLVM_ASSERTIONS flipped.
Reviewed by: dim, emaste, re (gjb)
MFC after: 1 week
MFC note: flip the default of LLVM_ASSERTIONS
Differential Revision: https://reviews.freebsd.org/D24264
Building lldb's lua/python bindings requires swig, but we do not want to
include it in the FreeBSD base system (as a build tool) because it has
non-trivial dependencies. As a workaround, add a make rule to generate
LLDBWrapLua.cpp, and we will commit the generated file.
Requires the swig30 package.
Reviewed by: brooks
Discussed with: dim
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24265
These functions first appeared in the First Edition of Unix (or earlier in the
pdp-7 version). Just claim 1st Edition for all this. The pdp-7 code is too
fragmented at this point to extend history that far back.
Modern debuggers and process tracers use ptrace() rather than procfs
for debugging. ptrace() has a supserset of functionality available
via procfs and new debugging features are only added to ptrace().
While the two debugging services share some fields in struct proc,
they each use dedicated fields and separate code. This results in
extra complexity to support a feature that hasn't been enabled in the
default install for several years.
PR: 244939 (exp-run)
Reviewed by: kib, mjg (earlier version)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D23837
If INTERNALLIB is defined we need PIE and bsd.incs.mk is
not included.
PR: 245189
Reviewed by: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org//D24233
While here, drop an extra conjunction from the list of error
conditions for the remaining EIO description in symlink(2).
Discussed with: mckusick (trimming duplicates)
MFC after: 2 weeks
EINTEGRITY was previously documented as a UFS-specific error for
mount(2). This documents EINTEGRITY as a filesystem-independent error
that may be reported by the backing store of a filesystem.
While here, document EIO as a filesystem-independent error for both
mount(2) and posix_fadvise(2). EIO was previously only documented for
UFS for mount(2).
Reviewed by: mckusick
Suggested by: mckusick
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24168
The "for" loop on big endian was inverting all the bits instead of
just the words
Issue reported by TestSuite (msun lib nan_test case)
Submitted by: Renato Riolino <renato.riolino@eldorado.org.br>
Submitted by: Fernando Valle <fernando.valle@eldorado.org.br>
Reviewed by: pfg, alfredo
Approved by: jhibbits (mentor)
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23926
The "kyua about" command assumes these files exist causing tests
supplied devel/kyua to fail.
Fix a bug defining the default KYUA_DOCDIR so the installed files can be
found.
Reported by: jenkins tests
Reviewed by: lwhsu
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24187
We need a valid st_dev, st_ino and st_mtime
to correctly track which files have been verified
and to update our notion of time.
ve_utc_set(): ignore utc if it would jump our current time
by more than VE_UTC_MAX_JUMP (20 years).
Allow testing of install command via userboot.
Need to fix its stat implementation too.
bhyveload also needs stat fixed - due to change to userboot.h
Call ve_error_get() from vectx_close() when hash is wrong.
Track the names of files we have hashed into pcr
For the purposes of measured boot, it is important
to be able to reproduce the hash reflected in
loader.ve.pcr
so loader.ve.hashed provides a list of names in the order they
were added.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D24027
Both programs are in this package so put the pam.d file in there too.
Reported by: emaste
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D24161
Having kyua in the base system will simplify automated testing in CI and
eliminates bootstrapping issues on new platforms.
The build of kyua is controlled by WITH(OUT)_TESTS_SUPPORT.
Reviewed by: emaste
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24103
It is added an INTERNALLIB and not installed. It will be used by kyua.
This is a preparatory commit for D24103.
Reviewed by: emaste
Obtained from: CheriBSD
Sponsored by: DARPA
For this, things are complicated. The first mention in the manual was in the 4th
edition manual (as an add on to exec(II)). The 2nd and 3rd editions didn't have
these in the manual (either as a separate page, or as an add-on to exec(II)). We
don't have good 1st, 2nd or 3rd edition distributions to look in. However,
there's a tape labeled 'last1120c' that we do have. This tape contains the last
version of the V2 edition of the C compiler on it (just after C got struct). On
this tape there was a libc.sa archive that contains source for execl and
execp. This source is sufficiently different from the V5 sources (which are the
next ones we have sources for) and have a slightly different calling convention
than later sources, suggesting that the early date for the last1120c tape is
correct (in that era, the epoch changed every year, leading to a one or two year
ambiguity on when the files could have been modified) and it should be though of
as V2. Since this was also a time of compiler development, and the calling
convetions are known to be under evolution, and since the rest of the sources in
libc.sa are consistent, that's further evidence that V2 is likely. Finally, 2nd
edition was the last version to fully support the 11/20 because it lacked many
basic features and bell labs moved off it to the 11/45 as soon as they could
afford to buy one, around this time era. The unix manuals make it sound like V3
might have supported the 11/20, but the same intro could also be read to mean it
didn't, at all, and that V3 was the first rewrite for the 11/45 ahead of the
rewrite in C that came with V4.
Taken together, the evidence leans most heavily to V2 (90% IMHO), and slightly
to V3 (8%) or possibly V4 (2%). I've not put all this in the man page, but have
left it here in case someone notices in the future that V4 is the first manual
page for it.
In a single-threaded program pthread_getspecific() always returns NULL,
so the old locale would not end up being freed.
PR: 239520
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
The geli(8) manual page has an example for preloading keyfiles during boot.
There is no detail though on how the lookup of these variables actually
works.
Let's document that the name of a device does not have to be a part
of the variable.
PR: 243261
Submitted by: johannes@jo-t.de
Approved by: bcr (mentor)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D24114
The current code uses a rwlock to protect the cached list, which
in turn holds a list of catentry objects, and increments reference
count while holding only read lock.
Fix this by converting the reference counter to use atomic operations.
While I'm there, also perform some clean ups around memory operations.
PR: 202636
Reported by: Henry Hu <henry.hu.sh@gmail.com>
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24095
Attempting to use ioctls on /proc/<pid>/mem to control a process will
trigger warnings on the console. The <sys/pioctl.h> include file will
also now emit a compile-time warning when used from userland.
Reviewed by: emaste
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D23822
The new liblua will be used in a forthcoming import of kyua.
Reviewed by: kevans
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24090
This similarly matches what we do in libc; compiling libssp with
-fstack-protector* is actively harmful. For instance, if the canary ctor
ends up with a stack protector then it will trivially trigger a false
positive as the canary's being initialized.
This was noted by the reporter as irc/ircd-hybrid started crashing at start
after our libssp was MFC'd to stable/11, as its build will explicitly link
in libssp. On FreeBSD, this isn't necessary as SSP bits are included in
libc, but it should absolutely not trigger runtime breakage -- it does mean
that the canary will get initialized twice, but as this is happening early
on in application startup it should just be redundant work.
Reported by: Tod McQuillin <devin@sevenlayer.studio>
MFC after: 3 days
Modules from ports/pkg are commonly installed to /boot/modules rather than to
the same directory the kernel resides in. Look there if a module is not found
next to the kernel.
Submitted by: mmacy
Reported by: Nick Principe <nap@iXsystems.com>
Approved by: mmacy (mentor)
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Crash was noticed by pkubaj building gcc9.
Apparently non dword-aligned char pointers are somewhat rare in the wild.
Reported by: pkubaj
Sponsored by: Tag1 Consulting, Inc.
when a superblock check-hash error is detected. This change clarifies
a mount that failed due to media hardware failures (EIO) from a mount
that failed due to media errors (EINTEGRITY) that can be corrected by
running fsck(8).
Sponsored by: Netflix
These flags have been unused for some time. Some of them were in the
CAM2 specification, but CAM has moved on a bit from that. Some were
used in the old Pluto VideoSpace (and AirSpace) systems which had the
video playback I/O scheduler in userspace, but have been unused since
then.
Reviewed by: chuck, ken
Differential Revision: https://reviews.freebsd.org/D24008
Clang from 9.0.0 onwards already has the necessary relocation range
extenders, so this workaround is no longer needed (it produces longer
and slower code). Tested on real hardware, and in cross-compile
environment.
Submitted by: mmel
The vectx API, computes the hash for verifying a file as it is read.
This avoids the overhead of reading files twice - once to verify, then
again to load.
For doing an install via loader, avoiding the need to rewind
large files is critical.
This API is only used for modules, kernel and mdimage as these are the
biggest files read by the loader.
The reduction in boot time depends on how expensive the I/O is
on any given platform. On a fast VM we see 6% improvement.
For install via loader the first file to be verified is likely to be the
kernel, so some of the prep work (finding manifest etc) done by
verify_file() needs to be factored so it can be reused for
vectx_open().
For missing or unrecognized fingerprint entries, we fail
in vectx_open() unless verifying is disabled.
Otherwise fingerprint check happens in vectx_close() and
since this API is only used for files which must be verified
(VE_MUST) we panic if we get an incorrect hash.
Reviewed by: imp,tsoome
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D23827
This has a side effect of eliminating filedesc slock/sunlock during path
lookup, which in turn removes contention vs concurrent modifications to the fd
table.
Reviewed by: markj, kib
Differential Revision: https://reviews.freebsd.org/D23889
Summary:
POWER architecture CPUs (Book-S) require natural alignment for
cache-inhibited storage accesses. Since we can't know the caching model
for a page ahead of time, always enforce natural alignment in memcpy.
This fixes a SIGBUS in X with acceleration enabled on POWER9.
As part of this, revert r358672, it's no longer necessary with this fix.
Regression tested by alfredo.
Reviewed by: alfredo
Differential Revision: https://reviews.freebsd.org/D23969
VSX instructions were added in POWER ISA V2.06 (POWER7), but it
requires data to be word-aligned. Such requirement was removed in
ISA V2.07B (POWER8).
Since current memcpy/bcopy optimization relies on VSX instructions
handling misalignment transparently, and kernel doesn't currently
implement an alignment error handler, this optimzation should be
restrict to ISA V2.07 onwards.
SIGBUS on stxvd2x instruction was reproduced in POWER7+ CPU.
Reviewed by: luporl, jhibbits, bdragon
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D23958
The new structure is copy-on-write. With the assumption that path lookups are
significantly more frequent than chdirs and chrooting this is a win.
This provides stable root and jail root vnodes without the need to reference
them on lookup, which in turn means less work on globally shared structures.
Note this also happens to fix a bug where jail vnode was never referenced,
meaning subsequent access on lookup could run into use-after-free.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D23884
LLVM's libunwind is used on all FreeBSD-supported CPU architectures and
is a required component.
Reviewed by: brooks (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23123
From POSIX,
[ENOTSUP]
The implementation does not support the combination of accesses
requested in the prot argument.
This fits the case that prot contains permissions which are not a subset
of prot_max.
Reviewed by: brooks, cem
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23843
Also update comments for which architectures use 128 bit long doubles,
as appropriate.
The softfloat specialization routines weren't updated since they
appear to be from an upstream source which we may want to update in
the future to get a more favorable license.
Reviewed by: emaste@
Differential Revision: https://reviews.freebsd.org/D23658
Once upon a time, sparc64 was the only ld128 architecture. However,
both aarch64 and riscv are now such architectures. Many of the
comments about how slow multiplication was on old sparc64 processors
are now no longer true. However, since no evaluation has been done for
aarch64 yet, it's unclear if they are still relevant or not. If not,
the code should be changed. If so, the comments should remove the
uncertainty.
Reviewed by: emaste@
Differential Revision: https://reviews.freebsd.org/D23658
versions, use "git describe --tags --long" output, which is more
descriptive. E.g., "90c78073f73eac58f4f8b4772a896dc8aac023bc" becomes
"llvmorg-10.0.0-rc2-0-g90c78073f73".
In the successful case, sockshost is not freed prior to return.
The failure case can now be hit after fetch_reopen(), which was not true
before. Thus, we need to make sure to clean up all of the conn resources
which will also close sd. For all of the points prior to fetch_reopen(), we
continue to just close sd.
CID: 1419598, 1419616
Update the man page to mention that extending a file with truncate(2)
is required by POSIX as of 2008.
Reviewed by: bcr
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23354
realpath(3) is used a lot e.g., by clang and is a major source of getcwd
and fstatat calls. This can be done more efficiently in the kernel.
This works by performing a regular lookup while saving the name and found
parent directory. If the terminal vnode is a directory we can resolve it using
usual means. Otherwise we can use the name saved by lookup and resolve the
parent.
See the review for sample syscall counts.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D23574
ABI has change in between ncurses 5 or 6. While theorically ncurses 6 is buildable with
backward compatibility, I fail at building in a way where the application linked against
the previous version of ncurses are rendering properly.
Let's go on the new ABI which provides all the latest features.
A compat12x package is cooking for backward compatibility
This gives much better concurrency when there are a large number of
cores per-domain and multiple domains. Avoid taking the lock entirely
if it will not be productive. ROUNDROBIN domains will have mixed
memory in each domain and will load balance to all domains.
While here refactor the zone/domain separation and bucket limits to
simplify callers.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D23673
Any SHM_* flag here is (and likely will continue to be) a shmflag that may
be passed to shm_open2(), with exception to SHM_ANON. This is a prereq to
adding appropriate support to truss/kdump.
Reviewed by: kaktus (slightly earlier version)
Differential Revision: https://reviews.freebsd.org/D23733
environ(7) was in AT&T Version 7
ac(8): Add a HISTORY section
sa(8): Add a HISTORY section
sqrt(3): Add the actual sqrt function to the HISTORY section
Obtained from: OpenBSD
Submitted by: gbergling@gmail.com
Approved by: bcr@(mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23693
up to par with the Linux pam_access(8).
Like the Linux pam_access(8) our pam_login_access(8) is a service module
for pam(3) that allows a administrator to limit access from specified
remote hosts or terminals. Unlike the Linux pam_access, pam_login_access
is missing some features which are added by this commit:
Access file can now be specified. The default remains /etc/access.conf.
The syntax is consistent with Linux pam_access.
By default usernames are matched. If the username fails to match a match
against a group name is attempted. The new nodefgroup module option will
only match a username and no attempt to match a group name is made.
Group names must be specified in brackets, "()" when nodefgroup is
specified. Otherwise the old backward compatible behavior is used.
This is consistent with Linux pam_access.
A new field separator module option allows the replacement of the default
colon (:) with any other character. This facilitates potential future
specification of X displays. This is also consistent with Linux pam_access.
A new list separator module option to replace the default space/comma/tab
with another character. This too is consistent with Linux pam_access.
Linux pam_access options not implemented in this commit are the debug
and audit options. These will be implemented at a later date.
Reviewed by: bjk, bcr (for manpages)
Approved by: des (blanket, implicit)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D23198
match the primary group a user belongs to. This commit extends the
match to secondary groups a user belongs to as well, just as the Linux
pam_access(5) does.
Approved by: des (implicit, blanket)
as in the login.access(5) man page. However strcasecmp() is used to compare
for these special strings. Because of this User accounts and groups with
the corresponding lowercase names are misintrepreted to have special
whereas they should not.
This commit fixes this, conforming to the man page and to how the Linux
pam_access(8) handles these special words.
Approved by: des (implicit, blanket)
Among the changes from before:
- Add support for extended colors on widechar version
- Enable ncurses extended functions
- Enable version 2 of the extended mouse support
- Enable SCREEN extensions
Modification that differs from upstream:
- _nc_delink_entries used to be exposed and was turn static,
turn it back as dynamic to not break abi
- Adapt our old termcap.c to modern ncurses
MFC after: 3 weeks
Add casts and L suffixes to libc quad support, to work around various
-Werror warnings from clang 10.0.0, such as:
lib/libc/quad/fixdfdi.c:57:12: error: implicit conversion from 'long long' to 'double' changes value from 9223372036854775807 to 9223372036854775808 [-Werror,-Wimplicit-int-float-conversion]
if (x >= QUAD_MAX)
~~ ^~~~~~~~
/usr/obj/usr/src/powerpc.powerpc/tmp/usr/include/sys/limits.h:89:19: note: expanded from macro 'QUAD_MAX'
#define QUAD_MAX (__QUAD_MAX) /* max value for a quad_t */
^~~~~~~~~~
/usr/obj/usr/src/powerpc.powerpc/tmp/usr/include/machine/_limits.h:91:20: note: expanded from macro '__QUAD_MAX'
#define __QUAD_MAX __LLONG_MAX /* max value for a quad_t */
^~~~~~~~~~~
/usr/obj/usr/src/powerpc.powerpc/tmp/usr/include/machine/_limits.h:75:21: note: expanded from macro '__LLONG_MAX'
#define __LLONG_MAX 0x7fffffffffffffffLL /* max value for a long long */
^~~~~~~~~~~~~~~~~~~~
and many instances of:
lib/libc/quad/fixunsdfdi.c:73:17: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
toppart = (x - ONE_HALF) / ONE;
^~~~~~~~
lib/libc/quad/fixunsdfdi.c:45:19: note: expanded from macro 'ONE_HALF'
#define ONE_HALF (ONE_FOURTH * 2.0)
^~~~~~~~~~
lib/libc/quad/fixunsdfdi.c:44:23: note: expanded from macro 'ONE_FOURTH'
#define ONE_FOURTH (1 << (LONG_BITS - 2))
^ ~~~~~~~~~~~~~~~
lib/libc/quad/fixunsdfdi.c:73:29: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
toppart = (x - ONE_HALF) / ONE;
^~~
lib/libc/quad/fixunsdfdi.c:46:15: note: expanded from macro 'ONE'
#define ONE (ONE_FOURTH * 4.0)
^~~~~~~~~~
lib/libc/quad/fixunsdfdi.c:44:23: note: expanded from macro 'ONE_FOURTH'
#define ONE_FOURTH (1 << (LONG_BITS - 2))
^ ~~~~~~~~~~~~~~~
MFC after: 3 days
-Werror warnings from clang 10.0.0, such as:
lib/libc/quad/fixdfdi.c:57:12: error: implicit conversion from 'long long' to 'double' changes value from 9223372036854775807 to 9223372036854775808 [-Werror,-Wimplicit-int-float-conversion]
if (x >= QUAD_MAX)
~~ ^~~~~~~~
/usr/obj/usr/src/powerpc.powerpc/tmp/usr/include/sys/limits.h:89:19: note: expanded from macro 'QUAD_MAX'
#define QUAD_MAX (__QUAD_MAX) /* max value for a quad_t */
^~~~~~~~~~
/usr/obj/usr/src/powerpc.powerpc/tmp/usr/include/machine/_limits.h:91:20: note: expanded from macro '__QUAD_MAX'
#define __QUAD_MAX __LLONG_MAX /* max value for a quad_t */
^~~~~~~~~~~
/usr/obj/usr/src/powerpc.powerpc/tmp/usr/include/machine/_limits.h:75:21: note: expanded from macro '__LLONG_MAX'
#define __LLONG_MAX 0x7fffffffffffffffLL /* max value for a long long */
^~~~~~~~~~~~~~~~~~~~
and many instances of:
lib/libc/quad/fixunsdfdi.c:73:17: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
toppart = (x - ONE_HALF) / ONE;
^~~~~~~~
lib/libc/quad/fixunsdfdi.c:45:19: note: expanded from macro 'ONE_HALF'
#define ONE_HALF (ONE_FOURTH * 2.0)
^~~~~~~~~~
lib/libc/quad/fixunsdfdi.c:44:23: note: expanded from macro 'ONE_FOURTH'
#define ONE_FOURTH (1 << (LONG_BITS - 2))
^ ~~~~~~~~~~~~~~~
lib/libc/quad/fixunsdfdi.c:73:29: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
toppart = (x - ONE_HALF) / ONE;
^~~
lib/libc/quad/fixunsdfdi.c:46:15: note: expanded from macro 'ONE'
#define ONE (ONE_FOURTH * 4.0)
^~~~~~~~~~
lib/libc/quad/fixunsdfdi.c:44:23: note: expanded from macro 'ONE_FOURTH'
#define ONE_FOURTH (1 << (LONG_BITS - 2))
^ ~~~~~~~~~~~~~~~
clang binary, with:
ld: error: undefined symbol: llvm::EnableABIBreakingChecks
>>> referenced by PlistDiagnostics.cpp
>>> PlistDiagnostics.o:(.sdata+0x0) in archive /usr/obj/usr/src/riscv.riscv64/lib/clang/libclang/libclang.a
[... many more like this ...]
It was used only to store the bounds of each swap device. However,
since swblk_t is a signed 32-bit int and daddr_t is a signed 64-bit
int, swp_pager_isondev() may return an invalid result if swap devices
are repeatedly added and removed and sw_end for a device ends up
becoming a negative number.
Note that the removed comment about maximum swap size still applies.
Reviewed by: jeff, kib
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23666
Revert parts of r353274 replacing vnet_state with a shutdown flag.
Not having the state flag for the current SI_SUB_* makes it harder to debug
kernel or module panics related to VNET bringup or teardown.
Not having the state also does not allow us to check for other dependency
levels between components, e.g. for moving interfaces.
Expand the VNET structure with the new boolean flag indicating that we are
doing a shutdown of a given vnet and update the vnet magic cookie for the
change.
Update libkvm to compile with a bool in the kernel struct.
Bump __FreeBSD_version for (external) module builds to more easily detect
the change.
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23097
The function allows to peek at the thread exit status and even see
return value, without joining (and thus finally destroying) the target
thread.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation (kib)
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D23676
fetch_socks5_getenv will allocate memory for the host (or set it to NULL) in
all cases through the function; the caller is responsible for freeing it if
we end up allocating.
While I'm here, I've eliminated a label that just jumps to the next line...
This commit separates out port parsing and validation from grabbing the host
from the env var. The only related bit really is that we need to be more
specific with the delimiter in the IPv6 case.
This change adds SOCKS5 support to the library fetch(3) and updates the man
page.
Details: Within the fetch_connect() function, fetch(3) checks if the
SOCKS5_PROXY environment variable is set. If so, it connects to this host
rather than the end-host. It then initializes the SOCKS5 connection in
accordance with RFC 1928 and returns the resulting conn_t (file descriptor)
for usage by the regular FTP/HTTP handlers.
Design Decision: This change defaults all DNS resolutions through the proxy
by sending all IPs as hostnames. Going forward, another feature might be to
create another environmental variable to toggle resolutions through the
proxy or not..
One may set the SOCKS5_PROXY environment variable in any of the formats:
SOCKS5_PROXY=proxy.example.com
SOCKS5_PROXY=proxy.example.com:1080
SOCKS5_PROXY=192.0.2.0
SOCKS5_PROXY=198.51.100.0:1080
SOCKS5_PROXY=[2001:db8::1]
SOCKS5_PROXY=[2001:db8::2]:1080
Then perform a request with fetch(1).
(note by kevans)
I've since been informed that Void Linux/xbps has a fork of libfetch that
also implements SOCKS5. I may compare/contrast the two in the mid-to-near
future.
Submitted by: Farhan Khan <farhan farhan codes>
Differential Revision: https://reviews.freebsd.org/D18908
exited but not yet joined thread.
Before, if the thread exited but was not yet joined, we returned
ESRCH.
According to IEEE Std 1003.1™-2017 recommendation in the
description of pthread_cancel(3):
If an implementation detects use of a thread ID after the end of its
lifetime, it is recommended that the function should fail and report
an [ESRCH] error.
So it seems desirable to not return ESRCH until the lifetime of the
thread ID ends. According to the section 2.9.2 Thread IDs,
The lifetime of a thread ID ends after the thread terminates if it
was created with the detachstate attribute set to
PTHREAD_CREATE_DETACHED or if pthread_detach() or pthread_join()
has been called for that thread.
In other words, lifetime for thread ID of exited but not yet joined thread
did not ended yet.
Prompted by: cperciva
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Update libarchive to 3.4.2
Relevant vendor changes:
PR #1289: atomic extraction support (bsdtar -x --safe-writes)
PR #1308: big endian fix for UTF16 support in LHA reader
PR #1326: reject RAR5 files that declare invalid header flags
Issue #987: fix support 7z archive entries with Delta filter
Issue #1317: fix compression output buffer handling in XAR writer
Issue #1319: fix uname or gname longer than 32 characters in pax writer
Issue #1325: fix use after free when archiving hardlinks in ISO9660 or XAR
Use localtime_r() and gmtime_r() instead of localtime() and gmtime()
X-MFC-With: r356212,r356365,r356416
MFC after: 1 week
Ensure proper handshake to transfer sigfastblock(2) blocking word
ownership from rtld to libthr.
Unfortunately sigfastblock(2) is not enough to stop intercepting
signals in libthr, because critical sections must ensure more than
just signal blocking.
Tested by: pho
Disscussed with: cem, emaste, jilles
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D12773
A new syscall sigfastblock(2) is added which registers a uint32_t
variable as containing the count of blocks for signal delivery. Its
content is read by kernel on each syscall entry and on AST processing,
non-zero count of blocks is interpreted same as the signal mask
blocking all signals.
The biggest downside of the feature that I see is that memory
corruption that affects the registered fast sigblock location, would
cause quite strange application misbehavior. For instance, the process
would be immune to ^C (but killable by SIGKILL).
With consumers (rtld and libthr added), benchmarks do not show a
slow-down of the syscalls in micro-measurements, and macro benchmarks
like buildworld do not demonstrate a difference. Part of the reason is
that buildworld time is dominated by compiler, and clang already links
to libthr. On the other hand, small utilities typically used by shell
scripts have the total number of syscalls cut by half.
The syscall is not exported from the stable libc version namespace on
purpose. It is intended to be used only by our C runtime
implementation internals.
Tested by: pho
Disscussed with: cem, emaste, jilles
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D12773
To make the PMC tool pmcstat working properly on Hygon platform, add
support for Hygon Dhyana family 18h by using the PMC initialization
code path of AMD family 17h.
Submitted by: Pu Wen <puwen@hygon.cn>
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D23562
