Commit Graph

168 Commits

Author SHA1 Message Date
imp
ed87bed6c0 remove now-redunant cardbus attachment. 2009-03-09 13:23:54 +00:00
jhb
dc03a05b16 Add support for the single-port NetMos NM9835 serial adapter. The puc(4)
entry is a specific entry to override the generic NetMos entry so that
puc(4) will leave this device alone and let uart(4) claim it.

Submitted by:	Navdeep Parhar  nparhar @ gmail
Reviewed by:	marcel
MFC after:	1 week
2009-03-05 16:43:33 +00:00
kaiw
ed3597a696 Added entries for Lava SP-PCI (1 serial + 1 parallel) PCI card. The
card is a multifunction PCI and report itself as two logical devices.
2009-02-11 00:08:03 +00:00
raj
9c68aa74a9 De-hard code UART speed setting for Marvell SOCs when hw.uart.console is not
specified. Instead, let uart(4) fall back to whatever speed firmware has set.
2009-01-08 13:24:25 +00:00
kan
ea5aab52c3 Minor style(9) compliance change. 2008-12-27 16:03:34 +00:00
marcel
85838645d5 Cast to uintptr_t before casting to void*. This allows the
QUICC backend to be built on LP64 platforms. This makes it
possible to include the QUICC backend in the kernel module.

PR:		127120
2008-11-22 21:22:53 +00:00
ed
25ee4afba9 Fix detaching of uart(4) devices.
With our new TTY layer we use a two step device destruction procedure.
The TTY first gets abandoned by the device driver. When the TTY layer
notices all threads have left the TTY layer, it deallocates the TTY.

This means that the device unit number should not be reused before a
callback from the TTY layer to the device driver has been made. newbus
doesn't seem to support this concept (yet), so right now just add a
destructor with a big comment in it. It's not ideal, but at least it's
better than panicing.

Reported by:	rnoland
2008-10-23 19:11:44 +00:00
raj
3226c13778 Introduce basic support for Marvell families of system-on-chip ARM devices:
*  Orion
     - 88F5181
     - 88F5182
     - 88F5281

  * Kirkwood
     - 88F6281

  * Discovery
     - MV78100

The above families of SOCs are built around CPU cores compliant with ARMv5TE
instruction set architecture definition. They share a number of integrated
peripherals. This commit brings support for the following basic elements:

  * GPIO
  * Interrupt controller
  * L1, L2 cache
  * Timers, watchdog, RTC
  * TWSI (I2C)
  * UART

Other peripherals drivers will be introduced separately.

Reviewed by:	imp, marcel, stass (Thanks guys!)
Obtained from:	Marvell, Semihalf
2008-10-13 20:07:13 +00:00
nyan
5272b43e20 Use bus_space_compare() rather than i386_memio_compare() directly. 2008-09-07 04:47:39 +00:00
nyan
848a954cf4 Add the 2nd CCU and PnP devices support on pc98.
Reviewed by:	imp
Obtained from:	//depot/projects/uart with some fixes
2008-08-25 14:45:24 +00:00
ed
cc3116a938 Integrate the new MPSAFE TTY layer to the FreeBSD operating system.
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:

- Improved driver model:

  The old TTY layer has a driver model that is not abstract enough to
  make it friendly to use. A good example is the output path, where the
  device drivers directly access the output buffers. This means that an
  in-kernel PPP implementation must always convert network buffers into
  TTY buffers.

  If a PPP implementation would be built on top of the new TTY layer
  (still needs a hooks layer, though), it would allow the PPP
  implementation to directly hand the data to the TTY driver.

- Improved hotplugging:

  With the old TTY layer, it isn't entirely safe to destroy TTY's from
  the system. This implementation has a two-step destructing design,
  where the driver first abandons the TTY. After all threads have left
  the TTY, the TTY layer calls a routine in the driver, which can be
  used to free resources (unit numbers, etc).

  The pts(4) driver also implements this feature, which means
  posix_openpt() will now return PTY's that are created on the fly.

- Improved performance:

  One of the major improvements is the per-TTY mutex, which is expected
  to improve scalability when compared to the old Giant locking.
  Another change is the unbuffered copying to userspace, which is both
  used on TTY device nodes and PTY masters.

Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.

Obtained from:		//depot/projects/mpsafetty/...
Approved by:		philip (ex-mentor)
Discussed:		on the lists, at BSDCan, at the DevSummit
Sponsored by:		Snow B.V., the Netherlands
dcons(4) fixed by:	kan
2008-08-20 08:31:58 +00:00
benno
c358527cf7 The XScale PXA255 has three generally ns16x50 compatible UARTs. One of the
variations from normal 16x50 behaviour however is the the use of a normally
unused bit of IER to control RX timeout interrupts independently of the
generally used RXRDY bit.  If this bit is not enabled, we only ever get
interrupts when the FIFO is full, never before.  This is not very useful when
the UART is being used as a console.

In order to support this without causing potential problems on more "normal"
16x50 variants, this change introduces two hints for the uart device, ier_mask
and ier_rxbits.  These can be used to override which bits get set and cleared
when we're enabling and disabling RX interrupts.

Reviewed by:	marcel
2008-05-30 01:57:13 +00:00
peter
5a3c5f632b Expand kdb_alt_break a little, most commonly used with the option
ALT_BREAK_TO_DEBUGGER.  In addition to "Enter ~ ctrl-B" (to enter the
debugger), there is now "Enter ~ ctrl-P" (force panic) and
"Enter ~ ctrl-R" (request clean reboot, ala ctrl-alt-del on syscons).

We've used variations of this at work.  The force panic sequence is
best used with KDB_UNATTENDED for when you just want it to dump and
get on with it.

The reboot request is a safer way of getting into single user than
a power cycle.  eg: you've hosed the ability to log in (pam, rtld, etc).
It gives init the reboot signal, which causes an orderly reboot.

I've taken my best guess at what the !x86 and non-sio code changes
should be.

This also makes sio release its spinlock before calling KDB/DDB.
2008-05-04 23:29:38 +00:00
sam
078a480e83 add device hints to control the rx FIFO interrupt level on 16550A parts
PR:		kern/121421
Submitted by:	UEMURA Tetsuya
Reviewed by:	marcel
MFC after:	2 weeks
2008-03-12 19:09:20 +00:00
raj
ddcbd7a1c9 Support for Freescale QUad Integrated Communications Controller.
The QUICC engine is found on various Freescale parts including MPC85xx, and
provides multiple generic time-division serial channel resources, which are in
turn muxed/demuxed by the Serial Communications Controller (SCC).

Along with core QUICC/SCC functionality a uart(4)-compliant device driver is
provided which allows for serial ports over QUICC/SCC.

Approved by:	cognet (mentor)
Obtained from:	Juniper
MFp4:		e500
2008-03-03 18:20:17 +00:00
raj
0757a4afb5 Initial support for Freescale PowerQUICC III MPC85xx system-on-chip family.
The PQ3 is a high performance integrated communications processing system
based on the e500 core, which is an embedded RISC processor that implements
the 32-bit Book E definition of the PowerPC architecture. For details refer
to: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8555E

This port was tested and successfully run on the following members of the PQ3
family: MPC8533, MPC8541, MPC8548, MPC8555.

The following major integrated peripherals are supported:

  * On-chip peripherals bus
  * OpenPIC interrupt controller
  * UART
  * Ethernet (TSEC)
  * Host/PCI bridge
  * QUICC engine (SCC functionality)

This commit brings the main functionality and will be followed by individual
drivers that are logically separate from this base.

Approved by:	cognet (mentor)
Obtained from:	Juniper, Semihalf
MFp4:		e500
2008-03-03 17:17:00 +00:00
rwatson
bdee30611d Add a new 'why' argument to kdb_enter(), and a set of constants to use
for that argument.  This will allow DDB to detect the broad category of
reason why the debugger has been entered, which it can use for the
purposes of deciding which DDB script to run.

Assign approximate why values to all current consumers of the
kdb_enter() interface.
2007-12-25 17:52:02 +00:00
marcel
c932130a31 Redefine bus_space_tag_t on PowerPC from a 32-bit integral to
a pointer to struct bus_space. The structure contains function
pointers that do the actual bus space access.

The reason for this change is that previously all bus space
accesses were little endian (i.e. had an explicit byte-swap
for multi-byte accesses), because all busses on Macs are little
endian.
The upcoming support for Book E, and in particular the E500
core, requires support for big-endian busses because all
embedded peripherals are in the native byte-order.

With this change, there's no distinction between I/O port
space and memory mapped I/O. PowerPC doesn't have I/O port
space. Busses assign tags based on the byte-order only.
For that purpose, two global structures exist (bs_be_tag and
bs_le_tag), of which the address can be taken to get a valid
tag.

Obtained from: Juniper, Semihalf
2007-12-19 18:00:50 +00:00
marcel
107e03db09 The HP Diva RMP3 uses BAR 0x14. 2007-05-17 04:07:19 +00:00
marius
017ef60bcb Fix bugs in the Sun -> AT keycode translation table which caused the
Props key to act as Again and the Paste and Copy keys to be inverted.
2007-05-01 14:14:52 +00:00
marcel
c5adbc966f Add PCI IDs for the HP RMP3 serial port. This is often used as
the serial console.

MFC after: 1 week
2007-04-05 19:15:46 +00:00
marcel
cd78e19f85 Don't use a time-limiting loop that's defined in terms of the baudrate
in the putc() method.  Likewise, in the getc() method, don't check for
received characters with an interval defined in terms of the baudrate.
In both cases it works equally well to implement a fixed delay.  More
importantly, it avoids calculating a delay that's roughly 1/10th the
time it takes to send/receive a character. The calculation is costly
and happens for every character sent or received, affecting low-level
console or debug port performance significantly. Secondly, when the
RCLK is not available or unreliable, the delays could disrupt normal
operation.

The fixed delay is 1/10th the time it takes to send a character at
230400 bps.
2007-04-03 01:21:10 +00:00
marcel
f30daf4b49 Don't expose the uart_ops structure directly, but instead have
it obtained through the uart_class structure. This allows us
to declare the uart_class structure as weak and as such allows
us to reference it even when it's not compiled-in.
It also allows is to get the uart_ops structure by name, which
makes it possible to implement the dt tag handling in uart_getenv().
The side-effect of all this is that we're using the uart_class
structure more consistently which means that we now also have
access to the size of the bus space block needed by the hardware
when we map the bus space, eliminating any hardcoding.
2007-04-02 22:00:22 +00:00
marcel
43bdc5ab02 For embedded UARTs compatible with the ns8250 family it is possible
that the driver clock is identical to the processor or bus clock.
This is the case for the PowerQUICC processor. When the clock is
high enough, overflows happen in the calculation of the time it
takes to send 1/10 of a character, used in delay loops. Fix the
overflows so as to fix bugs in the delay loops that can cause either
insufficient delays or excessive delays.
2007-03-28 18:34:59 +00:00
marcel
c0fdcbb7ed When we match UARTs found during bus-enumeration with UARTs used for
system devices (i.e. console, debug port or keyboard), don't stop
after the first match. Find them all and keep track of the last.
The reason for this change is that the low-level console is always
added to the list of system devices first, with other devices added
later. Since new devices are added to the list at the head, we have
the console always at the end. When a debug port is using the same
UART as the console, we would previously mark the "newbus" UART as
a debug port instead of as a console. This would later result in a
panic because no "newbus" device was associated with the console.
By matching all possible system devices we would mark the "newbus"
UART as a console and not as a debug port.
While it is arguably better to be able to mark a "newbus" UART as
both console and debug port, this fix is lightweight and allows
a single UART to be used as the console as well as a debug port
with only the aesthetic bug of not telling the user about it also
being a debug port.

Now that we match all possible system devices, update the rclk of
the system devices with the rclk that was obtained through the
bus attachment. It is generally true that clock information is
more reliable when obtained from the parent bus than by means of
some hardcoded or assumed value used early in the boot. This by
virtue of having more context information.

MFC after: 1 month
2007-03-28 18:26:12 +00:00
piso
6a2ffa86e5 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
marius
545a381d5f - Add a uart_rxready() and corresponding device-specific implementations
that can be used to check whether receive data is ready, i.e. whether
  the subsequent call of uart_poll() should return a char, and unlike
  uart_poll() doesn't actually receive data.
- Remove the device-specific implementations of uart_poll() and implement
  uart_poll() in terms of uart_getc() and the newly added uart_rxready()
  in order to minimize code duplication.
- In sunkbd(4) take advantage of uart_rxready() and use it to implement
  the polled mode part of sunkbd_check() so we don't need to buffer a
  potentially read char in the softc.
- Fix some mis-indentation in sunkbd_read_char().

Discussed with:	marcel
2007-01-18 22:01:19 +00:00
marius
abfeec800f - In sunkbd_probe_keyboard() don't bother to determine the keyboard layout
as we have no use for that info. Instead let this function return the
  keyboard ID and verify at its invocation in sunkbd_configure() that we're
  talking to a Sun type 4/5/6 keyboard, i.e. a keyboard supported by this
  driver.
- Add an option SUNKBD_EMULATE_ATKBD whose code is based on the respective
  code in ukbd(4) and like UKBD_EMULATE_ATSCANCODE causes this driver to
  emit AT keyboard/KB_101 compatible scan codes in K_RAW mode as assumed by
  kbdmux(4). Unlike UKBD_EMULATE_ATSCANCODE, SUNKBD_EMULATE_ATKBD also
  triggers the use of AT keyboard maps and thus allows to use the map files
  in share/syscons/keymaps with this driver at the cost of an additional
  translation (in ukbd(4) this just is the way of operation).
- Implement an option SUNKBD_DFLT_KEYMAP, which like the equivalent options
  of the other keyboard drivers allows to specify the default in-kernel
  keyboard map. For obvious reasons this made to only work when also using
  SUNKBD_EMULATE_ATKBD.
- Implement sunkbd_check(), sunkbd_check_char() and sunkbd_clear_state(),
  which are also required for interoperability with kbdmux(4).
- Implement K_CODE mode and FreeBSD keypad compose.
- As a minor hack define KBD_DFLT_KEYMAP also in the !SUNKBD_EMULATE_ATKBD
  case so we can obtain fkey_tab from <dev/kbd/kbdtables.h> rather than
  having to duplicate it and #ifdef some more code.
- Don't use the TX-buffer for writing the two command bytes for setting the
  keyboard LEDs as this consequently requires a hardware FIFO that is at
  least two bytes in depth, which the NMOS-variant of the Zilog SCCs doesn't
  have. Thus use an inlined version of uart_putc() to consecutively write
  the command bytes (a cleaner approach would be to do this via the soft
  interrupt handler but that variant wouldn't work while in ddb(4)). [1]
- Fix some minor style(9) bugs.

PR:		90316 [1]
Reviewed by:	marcel [1]
2006-11-02 00:01:15 +00:00
ru
4ef62e4ca5 Fix our ioctl(2) implementation when the argument is "int". New
ioctls passing integer arguments should use the _IOWINT() macro.
This fixes a lot of ioctl's not working on sparc64, most notable
being keyboard/syscons ioctls.

Full ABI compatibility is provided, with the bonus of fixing the
handling of old ioctls on sparc64.

Reviewed by:	bde (with contributions)
Tested by:	emax, marius
MFC after:	1 week
2006-09-27 19:57:02 +00:00
emax
2ec441fc93 Do not try to call keyboard callback unless keyboard is active and busy.
This should fix 'kbdcontrol -K < /dev/console' panic on sparc64 with sunkbd(4).

PR:		sparc64/96798
MFC after:	1 week
2006-09-18 22:56:59 +00:00
marcel
08406d93cd Properly propagate overrun conditions to the TTY layer.
MFC after: 3 days
2006-07-27 00:07:10 +00:00
marcel
5c244cdde1 On PowerPC the clock for the BRG comes from RTxC, not PCLK. Add a
quick hack to deal with this. We may need to formalize this better
and have this information come from the bus attachments.
2006-07-26 17:29:37 +00:00
marcel
9552f61e79 Implement UART_IOCTL_BAUD for the Z8530. This allows a serial console
on PowerPC use the current setting of the hardware and not second
guess what the OFW does on various machines.
2006-07-26 17:21:59 +00:00
marcel
2875d23aa5 Implement uart_cpu_eqres() and uart_cpu_getdev(). This allows
FreeBSD to use a serial console, as per the OFW settings.
2006-07-26 17:17:23 +00:00
phk
18c5cc5ccc Convert to new console api 2006-05-26 13:54:27 +00:00
phk
7879ac129f Eliminate gdb_checkc member from GDB_DBGPORT(), it is never used.
Use polling behaviour for gdb_getc() where convenient, this edges us
closer to the console code.
2006-05-26 11:54:32 +00:00
marcel
67b3bc8e5e Remove definitions of uart_[gs]etdreg. They are not used anymore and
were in fact wrong.
2006-05-23 22:33:44 +00:00
benno
fa8247e2ed The lcr variable in ns8250_probe is now unused. Remove it.
Missed by:	benno
2006-05-23 06:04:45 +00:00
benno
30977bc35b Allow uart(4)'s ns8250 driver to work with devices whose regshift is > 0.
- Rename REG_DL to REG_DLL and REG_DLH.
- Always treat DLL and DLH as two separate 8-bit registers instead of one
  16-bit register.

Additionally, remove the probe for the high 4 bits of IER being 0 and don't
assume we can always read/write 0 to/from those bits.

These changes allow uart(4) to drive the UARTs on the Intel XScale PXA255.

Reviewed by:	marcel
2006-05-23 00:41:12 +00:00
marcel
4bf82b99a7 o A divisor of 0 is perfectly valid. Reserve -1 for an invalid
divisor. This allows us to set the line speed to the maximum
   of 1/4 of the device clock.
o  Disable the baudrate generator before programming the line
   settings, including baudrate, and enable it afterwards.
2006-05-12 23:24:45 +00:00
jhb
495a1b1a3b First pass at removing Alpha kernel support. 2006-05-11 22:25:28 +00:00
marcel
193a6144b9 Rewrite of puc(4). Significant changes are:
o  Properly use rman(9) to manage resources. This eliminates the
   need to puc-specific hacks to rman. It also allows devinfo(8)
   to be used to find out the specific assignment of resources to
   serial/parallel ports.
o  Compress the PCI device "database" by optimizing for the common
   case and to use a procedural interface to handle the exceptions.
   The procedural interface also generalizes the need to setup the
   hardware (program chipsets, program clock frequencies).
o  Eliminate the need for PUC_FASTINTR. Serdev devices are fast by
   default and non-serdev devices are handled by the bus.
o  Use the serdev I/F to collect interrupt status and to handle
   interrupts across ports in priority order.
o  Sync the PCI device configuration to include devices found in
   NetBSD and not yet merged to FreeBSD.
o  Add support for Quatech 2, 4 and 8 port UARTs.
o  Add support for a couple dozen Timedia serial cards as found
   in Linux.
2006-04-28 21:21:53 +00:00
marcel
5432375ec3 Implement the ipend() method of the serdev I/F. 2006-04-28 18:29:23 +00:00
marcel
863c9d1355 o Add 5 Timedia single port serial cards.
o  While here, break long lines.
2006-04-27 17:08:30 +00:00
marcel
5424ae26d8 Use 115200 and not 9600 as the initial baudrate. This speeds up
detection of the FIFO size. Especially for large FIFOs.
2006-04-27 05:43:10 +00:00
marcel
bdb1b1a319 o Add 2 HP Diva single port UARTs. 2006-04-27 03:17:39 +00:00
marcel
8bb42a6fac o Add 2 NEC cards
o  Add 2 Dell cards
o  Add Quatech card
o  Add support for non-standard rclk values.
o  Update descriptions to match PCI id database.
2006-04-26 21:31:31 +00:00
marcel
281a077578 MFp4: Calculate the divisor before setting the DLAB bit. This
prevents that there's a control flow that leaves the DLAB
	bit set.
2006-04-23 21:15:07 +00:00
marcel
b36d718171 In z8530_divisor() return 0 if the calculated divisor is less than 0.
This happens when the baudrate is too high for the given RCLK.
2006-04-04 01:16:16 +00:00
marcel
c8a811b93f Remove unused variable 'error'. Forgotten in previous commit. 2006-04-02 21:58:09 +00:00