------------------------------------------------------------------------
r172854 | marius | 2007-10-21 10:03:18 -0700 (Sun, 21 Oct 2007) | 16 lines
Changed paths:
M /head/lib/libstand/tftp.c
- Given that we tell the compiler that struct ip is packed and 32-bit
aligned, GCC 4.2.1 also generates code for sendudp() that assumes
this alignment. GCC 4.2.1 however doesn't 32-bit align wbuf, causing
the loader to crash due to an unaligned access of wbuf in sendudp()
when netbooting sparc64. Solve this by specifying wbuf as packed and
32-bit aligned, too. As for lastdata and readudp() this currently is
no issue when compiled with GCC 4.2.1, though give lastdata the same
treatment as wbuf for consistency and possibility of being affected
in the future. [1]
- Sprinkle const on a lookup table.
------------------------------------------------------------------------
send along the "blksize" option specified in RFC2348,
and the "tsize" option specified in RFC2349.
Add code to parse the TFTP Option Acknowledgement (OACK) packet as
specified in RFC2347.
For TFTP servers which support the "blksize" option, we can
specify a TFTP Data block size larger than the default 512 bytes
specified in RFC1350. This offers greater read performance when
downloading files.
We request an initial size of 1428 bytes, which is less than the
Ethernet MTU of 1500 bytes. If the TFTP server sends back an OACK
packet, then use the block size specified in the OACK packet.
Most times it is usually the same value as what we request.
If the TFTP server supports RFC2348, we will see performance improvements
by transferring files over TFTP with larger block sizes.
If we do not get back an OACK packet, then we most likely we
are interoperating with a legacy TFTP server that does not
support TFTP extension options, so default to the block size of
512 bytes.
(2) If the "tftp.blksize" environment variable is set, then
take that value and use it when sending the TFTP RRQ packet,
instead of 1428. This allows us to set different values of
"tftp.blksize" in the loader, so that we can test out different
TFTP block sizes at run time.
Obtained from: Juniper Networks
Fixed by: rodrigc
unwanted packet(non-tftp). Change this to retransmit the packet(request or ack) only after
a timeout.
Obtained from: Juniper Networks
Fixed by: Santhanakrishnan Balraj <sbalraj at juniper dot net>
In sendrecv_tftp:
* Upon receving an unexpected block of data or error, resend the ACK
immediately instead of waiting till the expiry of receive data timeout
to resend the ACK.
* change the receive timeout value between retries to be 2xMINTMO.
Obtained from: Juniper Networks
Fixed by: Santhanakrishnan Balraj <sbalraj at juniper dot net>
to increase in steps of MINTMO, instead of doubling the timeout for every
retry.
Obtained from: Juniper Networks
Fixed by: Santhanakrishnan Balraj <sbalraj at juniper dot net>
It seems there have only been a small amount to the compiler-rt source
code in the mean time. I'd rather have the code in sync as much as
possible by the time we release 9.0. Changes:
- The libcompiler_rt library is now dual licensed under both the
University of Illinois "BSD-Like" license and the MIT license.
- Our local modifications for using .hidden instead of .private_extern
have been upstreamed, meaning our changes to lib/assembly.h can now be
reverted.
- A possible endless recursion in __modsi3() has been fixed.
- Support for ARM EABI has been added, but it has no effect on FreeBSD
(yet).
- The functions __udivmodsi4 and __divmodsi4 have been added.
Requested by: many, including bf@ and Pedro Giffuni
As noted in Austin Group issue #370 (an interpretation has been issued),
failing posix_spawn() because an fd specified with
posix_spawn_file_actions_addclose() is not open is unnecessarily harsh, and
there are existing implementations that do not fail posix_spawn() for this
reason.
Reviewed by: ed
MFC after: 10 days
as long as this does not happen, we need to fix interfaces to userland
in order to not break run-time accesses to the structure.
Reviwed by: kib
Tested by: pluknet
similar to what we do for binutils. When clang's default triple starts
with 'amd64-', it does not pass a proper -target-cpu option to its
first stage.
This can lead to problems, for example when structs are memcpy'd, and
clang erroneously assumes they are 16-byte aligned. It will then use
the 'movaps' SSE instruction to implement the copy, which results in a
bus error if the struct is really 8-byte aligned.
I encountered this issue when gcc's /usr/libexec/cc1 started crashing
with SIGBUS, after rebuilding world with clang ToT, but it also affects
the version of clang that we have in the tree. We were just lucky until
now, apparently. :)
Some files keep the SUN4V tags as a code reference, for the future,
if any rewamped sun4v support wants to be added again.
Reviewed by: marius
Tested by: sbruno
Approved by: re
file and processes information retrieval from the running kernel via sysctl
in the form of new library, libprocstat. The library also supports KVM backend
for analyzing memory crash dumps. Both procstat(1) and fstat(1) utilities have
been modified to take advantage of the library (as the bonus point the fstat(1)
utility no longer need superuser privileges to operate), and the procstat(1)
utility is now able to display information from memory dumps as well.
The newly introduced fuser(1) utility also uses this library and able to operate
via sysctl and kvm backends.
The library is by no means complete (e.g. KVM backend is missing vnode name
resolution routines, and there're no manpages for the library itself) so I
plan to improve it further. I'm commiting it so it will get wider exposure
and review.
We won't be able to MFC this work as it relies on changes in HEAD, which
was introduced some time ago, that break kernel ABI. OTOH we may be able
to merge the library with KVM backend if we really need it there.
Discussed with: rwatson
* Cleanup usage of iov's.
* Add support for SCTP_TIMEOUTS socketoption.
* Fix a bug in sctp_recvmsg(): return the msg_flags in case of an error.
* Fix a bug in the error handling of sctp_peeloff(): return the -1.
cpuset_t objects.
That is going to offer the underlying support for a simple bump of
MAXCPU and then support for number of cpus > 32 (as it is today).
Right now, cpumask_t is an int, 32 bits on all our supported architecture.
cpumask_t on the other side is implemented as an array of longs, and
easilly extendible by definition.
The architectures touched by this commit are the following:
- amd64
- i386
- pc98
- arm
- ia64
- XEN
while the others are still missing.
Userland is believed to be fully converted with the changes contained
here.
Some technical notes:
- This commit may be considered an ABI nop for all the architectures
different from amd64 and ia64 (and sparc64 in the future)
- per-cpu members, which are now converted to cpuset_t, needs to be
accessed avoiding migration, because the size of cpuset_t should be
considered unknown
- size of cpuset_t objects is different from kernel and userland (this is
primirally done in order to leave some more space in userland to cope
with KBI extensions). If you need to access kernel cpuset_t from the
userland please refer to example in this patch on how to do that
correctly (kgdb may be a good source, for example).
- Support for other architectures is going to be added soon
- Only MAXCPU for amd64 is bumped now
The patch has been tested by sbruno and Nicholas Esborn on opteron
4 x 12 pack CPUs. More testing on big SMP is expected to came soon.
pluknet tested the patch with his 8-ways on both amd64 and i386.
Tested by: pluknet, sbruno, gianni, Nicholas Esborn
Reviewed by: jeff, jhb, sbruno
[mixing the two can be quite bad -- they define the same context structures,
but with differing structure members (and sizes)]
Update the hash function support comments, and update config_freebsd.h
to match.
Approved by: kientzle
on i386-class hardware for sinl and cosl. The hand-rolled argument
reduction have been replaced by e_rem_pio2l() implementations. To
preserve history the following commands have been executed:
svn cp src/e_rem_pio2.c ld80/e_rem_pio2l.h
mv ${HOME}/bde/ld80/e_rem_pio2l.c ld80/e_rem_pio2l.h
svn cp src/e_rem_pio2.c ld128/e_rem_pio2l.h
mv ${HOME}/bde/ld128/e_rem_pio2l.c ld128/e_rem_pio2l.h
The ld80 version has been tested by bde, das, and kargl over the
last few years (bde, das) and few months (kargl). An older ld128
version was tested by das. The committed version has only been
compiled tested via 'make universe'.
Approved by: das (mentor)
Obtained from: bde
- While here, remove a few C comments that don't seem to contribute
anything additional to the man page.
PR: 146047
Submitted by: arundel
MFC after: 3 days
used a global pthread_mutex_t for synchronization. r179417 replaced that
with an implementation that directly used atomic instructions and thr_*
syscalls to synchronize callers to pthread_once. However, calling
pthread_mutex_lock on the global mutex implicitly ensured that
_thr_check_init() had been called but with r179417 this was no longer
guaranteed. This meant that if you were unlucky enough to have your first
call into libthr be a call to pthread_once(), you would segfault when
trying to access the pointer returned by _get_curthread().
The fix is to explicitly call _thr_check_init() from pthread_once().
Reviewed by: davidxu
Approved by: emaste (mentor)
MFC after: 1 week
vop_stdallocate() is filesystem agnostic and will run as slow as a
read/write loop in userspace; however, it serves to correctly
implement the functionality for filesystems that do not implement a
VOP_ALLOCATE.
Note that __FreeBSD_version was already bumped today to 900036 for any
ports which would like to use this function.
Also reserve space in the syscall table for posix_fadvise(2).
Reviewed by: -arch (previous version)
prefixes (Ki, Mi, Gi...) for humanize_number(3).
Note that applications has to pass HN_IEC_PREFIXES to use this
feature for backward compatibility reasons.
Reviewed by: arundel
MFC after: 2 weeks
negative return value from write to update its position in
a buffer. The patch, courtesy of Andrey Simonenko, also simplifies
a conditional by removing the "i != cnt" clause, since it is
always true at this point in the code. The bug caused problems
for mountd, when it generated a large reply to an exports RPC
request.
Submitted by: simon at comsys.ntu-kpi.kiev.ua
MFC after: 2 weeks
Of course, strerror_r() may still fail with ERANGE.
Although the POSIX specification said this could fail with EINVAL and
doing this likely indicates invalid use of errno, most other
implementations permitted it, various POSIX testsuites require it to
work (matching the older sys_errlist array) and apparently some
applications depend on it.
PR: standards/151316
MFC after: 1 week
{readline,history}.h are in /usr/include/edit so as to not conflict with
the GNU libreadline versions. To use the libedit readline(3) one should
add "-I/usr/include/edit" to their Makefile
(spelled "-I${DESTDIR}/${INCLUDEDIR}/edit" within the FreeBSD source tree).
* Enable its use in the BSD licensed utilities that support readline(3).
* To make it easier to sync libedit development with NetBSD, histedit.h
is moved into libedit's directory as history shows shown we keep merging
it into that location.
Obtained from: NetBSD
Sponsored by: Juniper Networks
integer overflow when the input is very large (for example, 100 Pi would
become about 10 Ei which exceeded signed int64_t).
Solve this issue by splitting the division into two parts and avoid the
multiplication.
PR: bin/146205
Reviewed by: arundel
MFC after: 1 month
syscall assembly files. This results in conflicting dependencies and can
cause unexpected results for parallel builds. This is because the .c file
and the .S file both generate the same .o file.
Submitted by: Simon Gerraty <sjg@juniper.net>
Sponsored by: Juniper Networks
The "FTS_NOSTAT" option can avoid a lot of calls to stat(2) if it knows that a
directory could not possibly have subdirectories. This is decided by looking at
the link count: a subdirectory would increment its parent's link count by
virtue of its own ".." entry. This assumption only holds for UFS-like
filesystems that implement links and directories this way, so we must punt for
others.
It looks like ZFS is a UFS-like file system, as the above also holds for ZFS.
Add ZFS to the list of file systems that allow for such optimization.
MFC after: 1 month
Calling rfork_thread(3) does not interoperate with pthreads and global state
is not properly protected.
Remove the BUGS section suggesting LinuxThreads entirely. With the current
pthread library libthr, all threads are kernel-level entities so there seems
little reason to use LinuxThreads.
with r219571 and re-enable building of cbrtl.
Implement the long double version for the cube root function, cbrtl.
The algorithm uses Newton's iterations with a crude estimate of the
cube root to converge to a result.
Reviewed by: bde
Approved by: das
behavior, where the module checks that the supplicant is a member of the
required group. The latter checks the target user instead. If neither
option was specified, pam_group(8) assumes "ruser" and issues a warning.
I intend to eventually change the default to "luser" to match the
behavior of similarly-named service modules in other operating systems.
MFC after: 1 month
support for it. Note that while sparc64 also supports the static TLS
model and thus tls_model("initial-exec"), using the default model
turned out to yield slightly better buildstone performance.
- If precision is 0, don't print period followed by no digits.
- If precision is 0 stop printing units as soon as possible
(eg. if we have three years and five days and precision is 0
print only 3y5d).
- If precision is not 0, print all units (eg. 3y0d0h0m0s.00).
MFC after: 2 weeks
it possible for the kernel to track login class the process is assigned to,
which is required for RCTL. This change also make setusercontext(3) call
setloginclass(2) and makes it possible to retrieve current login class using
id(1).
Reviewed by: kib (as part of a larger patch)
entries instead of six). This makes "setfacl -b" do the right thing
for ACLs on ZFS. UFS recognizes both kinds of trivial ACLs; no change
there.
MFC after: 2 months
can link against them. Add man pages for the new system calls, with one
errant forward reference to changes not yet present in FreeBSD, but soon
will be.
Reviewed by: anderson
Obtained from: Capsicum Project
Sponsored by: Google, Inc.
Discussed with: benl, kris, pjd
MFC after: 3 months
kernel.debug (or possibly other files), when WITH_CTF is active.
This is caused by a bug in clang's integrated assembler, causing malloc
to sometimes hang during initialization in statically linked executables
that use threading, such as the copy of ctfmerge that is built during
the bootstrap stage of buildworld. The bug has been submitted upstream:
http://llvm.org/bugs/show_bug.cgi?id=9352
Note that you might have to rebuild and install libc first, to get your
kernel build to finish, because the ctfmerge binary built during
bootstrap is linked with your base system's copy of libc.a, which might
already contain a bad copy of malloc.o.
There are several bugfixes in this update, but the most important one is
to ensure __start_ and __stop_ symbols for linker sets and kernel module
metadata are always emitted in object files:
http://llvm.org/bugs/show_bug.cgi?id=9292
Before this fix, if you compiled kernel modules with clang, they would
not be properly processed by kldxref, and if they had any dependencies,
the kernel would fail to load those. Another problem occurred when
attempting to mount a tmpfs filesystem, which would result in 'operation
not supported by device'.
setting. It can be built by setting the WITH_ICONV knob. While this
knob is unset, the library part, the binaries, the header file and
the metadata files will not be built or installed so it makes no impact
on the system if left turned off.
This work is based on the iconv implementation in NetBSD but a great
number of improvements and feature additions have been included:
- Some utilities have been added. There is a conversion table generator,
which can compare conversion tables to reference data generated by
GNU libiconv. This helps ensuring conversion compatibility.
- UTF-16 surrogate support and some endianness issues have been fixed.
- The rather chaotic Makefiles to build metadata have been refactored
and cleaned up, now it is easy to read and it is also easier to add
support for new encodings.
- A bunch of new encodings and encoding aliases have been added.
- Support for 1->2, 1->3 and 1->4 mappings, which is needed for
transliterating with flying accents as GNU does, like "u.
- Lots of warnings have been fixed, the major part of the code is
now WARNS=6 clean.
- New section 1 and section 5 manual pages have been added.
- Some GNU-specific calls have been implemented:
iconvlist(), iconvctl(), iconv_canonicalize(), iconv_open_into()
- Support for GNU's //IGNORE suffix has been added.
- The "-" argument for stdin is now recognized in iconv(1) as per POSIX.
- The Big5 conversion module has been fixed.
- The iconv.h header files is supposed to be compatible with the
GNU version, i.e. sources should build with base iconv.h and
GNU libiconv. It also includes a macro magic to deal with the
char ** and const char ** incompatibility.
- GNU compatibility: "" or "char" means the current local
encoding in use
- Various cleanups and style(9) fixes.
Approved by: delphij (mentor)
Obtained from: The NetBSD Project
Sponsored by: Google Summer of Code 2009
As it was pointed out by Alan Cox, that no longer serves its purpose with
the modern UMA allocator compared to the old one used in 4.x days.
The removal of sysctl eliminates max_proc_mmap type overflow leading to
the broken mmap(2) seen with large amount of physical memory on arches
with factually unbound KVA space (such as amd64). It was found that
slightly less than 256GB of physmem was enough to trigger the overflow.
Reviewed by: alc, kib
Approved by: avg (mentor)
MFC after: 2 months
ctfconvert will corrupt object files that are compiled with -g, if it is
not run with -g itself.
To fix it, remove -g from CFLAGS in lib/librt/Makefile. If you need to
compile this library with debug info, use DEBUG_FLAGS=-g instead, which
will work correctly, even when using WITH_CTF.
The existing implementation of bzero incorrectly clears bytes when the
start address is not word aligned. Fix it by using REG_SHI macro which
works on both 32 and 64 bit.
Submitted by: Artem Belevich (fbsdlist at src cx)
Most of the ports I broke when I imported utmpx, were simple management
utilities for the utmp database, allowing you to add/remove entries
manually.
Add a small tool called utxrm(8), which allows you to remove an entry
from the utmpx database by hand. This is useful when a login daemon
crashes or fails to remove the entry during shutdown.
have an executable stack, due to linking in hand-assembled .S or .s
files, that have no .GNU-stack sections:
RWX --- --- /lib/libcrypto.so.6
RWX --- --- /lib/libmd.so.5
RWX --- --- /lib/libz.so.6
RWX --- --- /lib/libzpool.so.2
RWX --- --- /usr/lib/liblzma.so.5
These were found using scanelf, from the sysutils/pax-utils port.
Reviewed by: kib
the construct like printf("%\s", NULL) resulting from macroexpand of
ERROR(u, NULL), making it impossible to use LIBUFS_DEBUGGING.
With inline function, compiler cannot detect the NULL argument to
known function and does not try to convert it into puts().
In collaboration with: pho
calling thread's unique integral ID, which is similar to AIX function of
the same name. Bump __FreeBSD_version to note its introduction.
Reviewed by: kib
All 9.6 users with DNSSEC validation enabled should upgrade to this
version, or the latest version in the 9.7 branch, prior to 2011-03-31
in order to avoid validation failures for names in .COM as described
here:
https://www.isc.org/announcement/bind-9-dnssec-validation-fails-new-ds-record
In addition the fixes for this and other bugs, there are also the
following:
* Various fixes to kerberos support, including GSS-TSIG
* Various fixes to avoid leaking memory, and to problems that could
prevent a clean shutdown of named
This matches the constants from <signal.h> with 'SIG' removed, which POSIX
requires kill and trap to accept and 'kill -l' to write.
'kill -l', 'trap', 'trap -l' output is now upper case.
In Turkish locales, signal names with an upper case 'I' are now accepted,
while signal names with a lower case 'i' are no longer accepted, and the
output of 'killall -l' now contains proper capital 'I' without dot instead
of a dotted capital 'I'.
These changes are needed to fix n32 compile after the recent change of
mips n32 MACHINE_ARCH to mipsn32eb/mipsn32el.
Reviewed by: imp, bz (earlier version)
architectures that support this .note. In particular, do not unneccessary
emit the notes on ia64 and sparc64, which ABI require non-executable stacks.
Tested by: marcel
Fix a long standing bug, where the procs ticks where assumed to be in
us. Instead, read cpu_tick_frequency from the kernel and use the same
logic to convert runtime. This is still too optimistic in that it
assumes cpu_tick_frequency is available and fixed. Since this function
is only called on crashdumps, I think we can live with that. Testing has
shown the values to be correct for different kern.hz inside Virtualbox.
Bump WARNS. Alignment issues on some archs mean this is still at 3.
Reviewed by: bde
- make WARNS=6 clean for archs w/o strict alignment requirments
- add const, ANSIfy, remove unused vars, cast types for comparison
- thanks to differing definitions of VM_MIN_ADDRESS across our archs, we
need to trick the compiler to not complain about signedness. We could
either fix VM_MIN_ADDRESS to always be a simple integer or make the
check conditional on $ARCH.
Closes PRs: kern/42386, kern/83364
Reviewed by: bde
Because {NGROUPS_MAX} may become variable, its value should be obtained
using sysconf(3). If a #define is used anyway, it should be obtained by
including <limits.h> as that is in POSIX like getgroups(2) itself is.
<sys/param.h> is not in POSIX.
MFC after: 1 week
This is what SUSv4 requires, and also the only thing that works if strict
standards compliance is requested or mknodat() is needed.
PR: standards/123688
Submitted by: gcooper
MFC after: 1 week
