By default, or with the -P flag, find(1) should evaluate paths "physically."
For symlinks, this means using the link itself instead of the target.
Historically (since the import of BSD 4.4-lite from CSRG), find(1) has
failed to refer to the link itself, at least for -newer and -samefile.
[0]: http://pubs.opengroup.org/onlinepubs/9699919799/utilities/find.html
PR: 222698
Reported by: Harald Schmalzbauer <bugzilla.freebsd AT omnilan.de>
Sponsored by: Dell EMC Isilon
- Densely number CPUs to avoid systems with CPUs with very high ID numbers
- Always have the BSP be CPU 0 to avoid remnant brokenness with non-0 BSPs
in other parts of the kernel.
- Improve parsing of the device tree CPU listings on SMT systems.
- Allow reboot via RTAS as well as OF for pSeries systems booted by FDT
without functioning Open Firmware.
Obtained from: projects/powernv
MFC after: 3 weeks
Neither swapout_procs() nor swapout() access the map. Since the
process' vmspace is referenced only to obtain the pointer to the
vm_map, the reference is not needed as well.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13681
is used as the bootloader on a number of PPC64 platforms. This involves the
following pieces:
- Making the first instruction a valid kernel entry point, since kexec
ignores the ELF entry value. This requires a separate section and linker
magic to prevent the linker from filling the beginning of the section
with stubs.
- Adding an entry point at 0x60 past the first instruction for systems
lacking firmware CPU shutdown support (notably PS3).
- Linker script changes to support the above.
MFC after: 1 month
If these are not aligned, the linker has to emit a different type of
relocation that the early boot self-relocation code cannot handle, even
in principle, resulting in them being set to zero and the kernel crashing.
MFC after: 1 week
to recover from that, especially when something goes wrong.
- When userland changes EXT_CSD, update the kernel copy before using
relevant EXT_CSD bits in mmcsd_switch_part().
The resize test used bsdlabel(8), which is not available on all
architectures. Change it to use gpart(8) instead, which should be available
everywhere.
PR: 221763
Reported by: andrew
MFC after: 2 weeks
loader, but not compile as loader (it's building a library), so we
can't just include loader.mk for the defines. Move LOADER_DISK_SUPPORT
back to defs.mk for the moment.
Sponsored by: Netflix
Overlays were previously not applied when U-Boot provides FDT or EFI
provides FDT, only when we load FDT from /boot/dtb given name from U-Boot.
Make all three paths lead to loading fdt_overlays and applying them, so that
fdt_overlays can be expected to Just Work.
Reviewed by: gonzo, imp, manu
Differential Revision: https://reviews.freebsd.org/D13664
This change mostly reverts r293436, which introduced the bug due to a belief
that geli(8) would allocate md(4) devices by itself. However, that belief is
incorrect. Instead of using linear probing to find available md(4) numbers,
it's best to use the existing attach_md function.
Reviewed by: ngie
MFC after: 2 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D13666
enabled (though, no interrupt generation enabled for them) all the
time as soon as (re-)tuning is supported; only enable them and let
them generate interrupts when actually using (re-)tuning.
- Also disable all interrupts except SDHCI_INT_DATA_AVAIL ones while
executing tuning and not just their signaling.
This adds HardenedBSD which is a pseudo-fork of FreeBSD. It hasn't had a
release yet, but does does have active users and a community. As such
document it as a branch off of FreeBSD-stable. Ideally this adds enough
space so that future releases are easy enough to add.
Resolve a minor mismatch: TXP_CMD_READ_VERSION instead of
TXP_CMD_VERSIONS_READ.
Curiously the later is defined but not used in OpenBSD.
Obtained from: OpenBSD (CVS 1.31-1.34)
MFC after: 1 week
draft of a never-finalized standard (CHRP) and is irrelevant in practice
on FreeBSD since we load the kernel with loader(8) on Open Firmware
platforms anyway. Moreover, loader(8), which is directly loaded by Open
Firmware, has never had an equivalent note.
MFC after: 2 weeks
Fix for remainder overflow, when in rare cases adding remainder to divider
exceeded 1 and turned the total to 1000 in final formatting, taking up
the space for the unit character.
The fix continues the division of the original number if the above case
happens -- added the appropriate check to the for loop performing
the division. This lowers the value shown, to make it fit into the buffer
space provided (1.0M for 4+1 character buffer, as used by ls).
Add test case for the reported bug and extend test program to support
providing buffer length (ls -lh uses 5, tests hard-coded 4).
PR: 224498
Submitted by: Pawel Biernacki <pawel.biernacki@gmail.com>
Reported by: Masachika Ishizuka <ish@amail.plala.or.jp>
Reviewed by: cem, kib
Approved by: cem, kib
MFC after: 1 week
Sponsored by: Mysterious Code Ltd.
Differential Revision: D13578
Reviewed by: alc, markj (as part of the larger patch)
Tested by: pho (again, as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13671
(now: Interrupt_Index[15]) and assigned the previously reserved bits
55:48 (Interrupt_Index[14:0] goes into 63:49 while Destination Field
used 63:56 and bit 48 now is Interrupt_Format) in the IO redirection
tables (see the VT-d specification, "5.1.5.1 I/OxAPIC Programming").
Thus, when not using interrupt remapping, ensure that all previously
reserved bits in the high part of the RTEs are zero instead of doing
a read-modify-write for their Destination Field bits only.
Otherwise, on machines based on Apollo Lake and its derivatives such
as Denverton, typically some of the previously preserved bits remain
set after boot when not employing interrupt remapping. The result is
that INTx interrupts are not getting delivered.
Note: With an AMD IOMMU, interrupt remapping apparently bypasses the
IO APIC altogether.
Submitted by: loos (modulo comment)
Reviewed by: jhb (modulo comment)
In the case of a simple dtbo where fragment uses target-path and the overlay
contains no references, /__fixups__ will not be included by either our dtc
or dtc from ports, but the file still has valid fragments to be applied.
Additional testing found that /__symbols__ might also be omitted if it's
empty, which is not necessarily an error.
Reviewed by: gonzo, imp
Differential Revision: https://reviews.freebsd.org/D13663
fdt_load_dtb_overlays was written to unload previous overlay when a new
valid one is come across. fdt_apply_overlays further down is written to
iterate over all .dtbo's currently loaded and apply them one-by-one. Correct
fdt_load_dtb_overlays to stop dropping valid overlays that were previously
loaded and match expectations.
Reviewed by: gonzo, imp
Differential Revision: https://reviews.freebsd.org/D13659
This bring back r327293 from OpenBSD, with the important difference that
we are now getting it from their ip6_id.c file.
Obtained from: OpenBSD (CVS v1.3)
correct non-repetitive ID code, based on comments from niels provos.
- seed2 is necessary, but use it as "seed2 + x" not "seed2 ^ x".
- skipping number is not needed, so disable it for 16bit generator (makes
the repetition period to 30000)
Obtained from: OpenBSD (CVS rev. 1.2)
MFC after: 1 week
netinet6/ip6_id.c: niels kindly dropped clause 3/4 from the license.
I was looking at the wrong file. There is an important merge that must be
done before I can bring this change.
This file is supposed to be based on the OpenBSD CVS v1.6 but checking
the OpenBSD repository the license had already dropped the 2&3 clasues by
then. Catch up with the licensing.
Obtained from: OpenBSD (CVS 1.2)
Most notable, other than some style issues:
CVS 1.11:
do not use LOG_CONS.
CVS 1.13:
consistently use exit instead of return in main().
use LOG_WARNING instead of LOG_ERR for non critical errors.
Obtained from: NetBSD
MFC after: 2 weeks
Make it easier to identify the point where we started diverging from
NetBSD. Newer versions of this file has been updated to a new license so
this information may become useful some day.
Obtained from: NetBSD
