Since no actual radar data is ever handled, this won't
do anything. It's mostly here as a reference for those who
wish to experiment with radar detection.
Approved by: re (kib)
the resource covers the entire range. Some BIOSes appear to mark
endpoints as non-fixed incorrectly (non-fixed endpoints are supposed to
be used in _PRS when OSPM is allowed to allocate a certain chunk of
address space within a larger range, I don't believe it is supposed to be
used for _CRS).
Approved by: re (kib)
which does not require change in the znode structure.
Specifically, it queries rdev from the znode in the
same sa_bulk_lookup already done in zfs_getattr().
Submitted by: pjd (with some revisions)
Reviewed by: pjd, mm
Approved by: re (kib)
ioctl interface for DFS modules to use.
Since there's no open source dfs code yet, this doesn't introduce any
operational changes.
Approved by: re (kib)
tools.
* introduce pe_enabled, which (will) indicate whether the radar
detection stuff is enabled or not. Right now it's incorrectly
set, based on something previously written. I'll sort it out
later.
* Don't set HAL_PHYERR_PARAM_ENABLE in pe_relstep to say whether
radar detection is on.
* Return whether blockradar, fir128 and enmaxrssi is enabled.
* Change some of the phyerr params to be integers rather than
HAL_BOOL so they can be set to the NOPARAM value when the
setup function is called. This is in line with other radar
parameters.
* Add new configuration parameters for fir128, blockradar and
enmaxrssi, rather than defaulting to off, on and on respectively.
Approved by: re (kib)
polluting the AR5416 code with later chipset support.
Note: ar9280InitPLL() supports Merlin (AR9280) and later (AR9285, AR9287.)
Submitted by: ssgriffonuser@gmail.com
Approved by: re (kib)
These should be disabled for the AR5416 in hostap/mesh/ibss mode,
as the AR5416 doesn't have support for radar detection on the
ext channel of a HT40 setup. Later chips do.
Approved by: re (kib)
containing a kernel under /boot and that it's default value is "kernel"
not "/boot/kernel/kernel".
PR: docs/158992
Reported by: Wayne Mitchell wayne.mitchell.iz at gmail
Approved by: re (kib)
MFC after: 1 week
These system calls have already been implemented in the kernel; now we
hook up libc symbols so userspace can drive them.
Approved by: re (kib), mentor (rwatson)
Sponsored by: Google Inc
reference driver.
* Australia should use FCC3_WORLD
* Add some new SKUs; these are just the EEPROM values and haven't been
fully defined yet. As such they won't affect anything.
Obtained from: Atheros
Approved by: re (kib)
When reporting on a capability, flag the fact that it is a capability,
but also unwrap to report all of the usual information about the
underlying file.
Approved by: re (kib), mentor (rwatson)
Sponsored by: Google Inc
on frequency bands with DFS. All Atheros chipsets >= AR9001 support
radar event detection on HT40 extension channels.
This should be a chipset specific item rather than enforced in the
regulatory domain database.
In addition, it's irrelevant for STA mode, as the radar detection is
done by the access point, not the STA.
Approved by: re (kib)
pollution. That is a step further in the direction of building correct
policies for userland and modules on how to deal with the number of
maxcpus at runtime.
Reported by: jhb
Reviewed and tested by: pluknet
Approved by: re (kib)
list channel' is run. The following new options are introduced:
* D: channel requires DFS
* R: channel has a radar event
* I: channel has detected inteference
* C: the CAC period has completed on a channel that requires it (ie,
DFS + PASSIVE.)
It's relevant for developing, debugging and using the DFS and
interference options.
Approved by: re (bz)
pc_name is only included when KTR option is and it does introduce a
subdle KBI breakage that totally breaks vmstat when world and kernel are
not in sync.
Besides, it is not used somewhere.
In collabouration with: pluknet
Reviewed by: jhb
Approved by: re (kib)
From now on, default values for FreeBSD will be 64 maxiumum supported
CPUs on amd64 and ia64 and 128 for XLP. All the other architectures
seem already capped appropriately (with the exception of sparc64 which
needs further support on jalapeno flavour).
Bump __FreeBSD_version in order to reflect KBI/KPI brekage introduced
during the infrastructure cleanup for supporting MAXCPU > 32. This
covers cpumask_t retiral too.
The switch is considered completed at the present time, so for whatever
bug you may experience that is reconducible to that area, please report
immediately.
Requested by: marcel, jchandra
Tested by: pluknet, sbruno
Approved by: re (kib)
This patch is going to help in cases like mips flavours where you
want a more granular support on MAXCPU.
No MFC is previewed for this patch.
Tested by: pluknet
Approved by: re (kib)
to the maximum number of CPUs to ensure that lcpustates[] array is always
allocated to the maximum size. Previously, if top was started without
per-CPU stats it would allocate a smaller lcpustates[] array. When
per-CPU stats were then enabled, it would overflow the array and trash
the cpustates_columns[] array causing the CPU stats to be printed in the
wrong locations.
Approved by: re (kib)
MFC after: 1 week
-g, by reverting r219139. The LLVM PR referenced in that revision was
fixed in the mean time, and we imported a clang snapshot soon
afterwards, so the temporary workaround of disabling clang's integrated
assembler is no longer needed.
In this particular case, using e.g. DEBUG_FLAGS=-g causes clang to
output certain directives into assembly that our version of GNU as
chokes on.
Reported by: dougb
Approved by: re (kib)
ki_rusage member when KERN_PROC_INC_THREAD is passed to one of the
process sysctls.
- Correctly account for the current thread's cputime in the thread when
doing the runtime fixup in calcru().
- Use TIDs as the key to lookup the previous thread to compute IO stat
deltas in IO mode in top when thread display is enabled.
Reviewed by: kib
Approved by: re (kib)
sintrcnt/sintrnames which are symbols containing the size of the 2
tables.
- For amd64/i386 remove the storage of intr* stuff from assembly files.
This area can be widely improved by applying the same to other
architectures and likely finding an unified approach among them and
move the whole code to be MI. More work in this area is expected to
happen fairly soon.
No MFC is previewed for this patch.
Tested by: pluknet
Reviewed by: jhb
Approved by: re (kib)
We wish to be able to audit capability rights arguments; this code
provides the necessary infrastructure.
This commit does not, of itself, turn on such auditing for any
system call; that should follow shortly.
Approved by: mentor (rwatson), re (Capsicum blanket)
Sponsored by: Google Inc
a /rescue/ifconfig more modern than the kernel could still configure
IPv4 or IPv6 addresses.
Reported by: Andrzej Tobola (ato iem.pw.edu.pl)
Reported by: gcooper
MFC after: 1 day
X-MFC: will not MFC any time soon, just reminder for r222527
devices are imbalanced zfs will lots of CPU searching for space on devices
which tend to be pretty full. It should instead fail quickly on the full
devices and move onto devices which have more availability.
New loader tunable: vfs.zfs.mg_alloc_failures (min = 8)
Illumos-gate changeset: 13379:4df42cc92254
Obtained from: Illumos (Bug #1051)
MFC after: 2 weeks
cddl/contrib/opensolaris/cmd/zpool/zpool.8:
cddl/contrib/opensolaris/lib/libzfs/common/libzfs_import.c:
Add the "zpool labelclear" command. This command can be
used to wipe the label data from a drive that is not
active in a pool. The optional "-f" argument can be
used to treat an exported or foreign vdev as "inactive"
thus allowing its label information to be cleared.
perform pool actions is always displayed.
cddl/contrib/opensolaris/cmd/zpool/zpool_main.c:
The "zpool status" command reports the "last seen at"
device node path when the vdev name is being reported
by GUID. Augment this code to assume a GUID is reported
when a device goes missing after initial boot in addition
to the previous behavior of doing this for devices that
aren't seen at boot.
cddl/contrib/opensolaris/lib/libzfs/common/libzfs_pool.c:
In zpool_vdev_name(), report recently missing devices
by GUID. There is no guarantee they will return at
their previous location.
cddl/contrib/opensolaris/lib/libzfs/common/libzfs_pool.c:
o Add zpool_pool_state_to_name() API to libzfs which converts a
pool_state_t into a user consumable string.
o While here, correct constness of make zpool_state_to_name()
and zpool_label_disk().
MFD after: 1 week
may be jointly referenced via the mask CTLFLAG_CAPRW. Sysctls with these
flags are available in Capsicum's capability mode; other sysctl nodes are
not.
Flag several useful sysctls as available in capability mode, such as memory
layout sysctls required by the run-time linker and malloc(3). Also expose
access to randomness and available kernel features.
A few sysctls are enabled to support name->MIB conversion; these may leak
information to capability mode by virtue of providing resolution on names
not flagged for access in capability mode. This is, generally, not a huge
problem, but might be something to resolve in the future. Flag these cases
with XXX comments.
Submitted by: jonathan
Sponsored by: Google, Inc.
