It is not compat w/ the old timesync message format, which the message
type stays the same as the old timesync message.
MFC after: 1 week
Sponsored by: Microsoft
This will allow new users to uncomment the modules and have things work
with less head scratching, in the event they decide to uncomment any
of the section separators, e.g. %usm or %vcm, as the module loading is
only effective in the %default section.
MFC after: 1 week
- Explicitly test snmp_pdu_encode against SNMP_CODE_OK instead of assuming
any non-zero value is bad.
- Print out the code before calling abort() to give the end-user something
actionable to debug without having to recompile the binary, since the
core might not have these details.
MFC after: 1 week
Kernel stack overflows in MIPS call panic() directly from an assembly
handler after storing the interrupted context's registers in a
trapframe. Rather than inferring the location of ra, sp, and pc from
the instruction stream, recognize the pc of a kernel stack overflow
and pull the registers from the trapframe.
Sponsored by: DARPA / AFRL
- Honor PG_NODUMP by not dumping pages with this flag set.
- Pat the watchdog during dumps to avoid a watchdog reset while writing
out a dump.
- Reformat the output during a dump to update every 10% done rather than
every 2MB dumped.
- Include UMA small pages and pages holding PV entries in minidumps.
Sponsored by: DARPA / AFRL
Adding %b support to vfprintf for parity with kernel space requires
more discussion/review.
In particular, many parties were concerned over introducing a
non-standard format qualifier to *printf(3) which didn't already
exist in other OSes, e.g. Linux, thus making code which used %b
harder to port to other operating systems.
Requested by: many
to recreate it from ${MAKEOBJDIRPREFIX} and ${SRC_BASE} and ${KERNCONF},
the latter being especially problematic when KERNCONF is set to the names
of multiple kernel configs.
I don't yet know which RX descriptor bits map to shortgi, long-gi,
short-preamble, long-preamble, STBC, LDPC, HT40, etc - so I can't
easily add those just yet.
There's apparently no per-frame RX RSSI information exposed so we
also just use the results from the previous calibration task.
This also tidies up how the per-mbuf RSSI is pushed into the frame -
now that it's attached to the mbuf via rx_stats, we don't have to
do any silly hijinx to get it out of the frame processing path.
Tested:
* RTL8712, 1x1 cut 3, STA mode
dump_avail[] is supposed to be a superset of phys_avail[] that
describes all of the memory ranges that should be included in a full
dump. minidumps don't consider pages described by dump_avail[] to be
valid and thus they are excluded via the is_dumpable() function. Most
MIPS platforms (including MALTA) set dump_avail[] to be identical to
phys_avail[]. In particular, phys_avail[] doesn't include the kernel
itself, so pages for the kernel and it's global variables are not
considered dumpable and not included in the dump. Fix this by setting
dump_avail[0] to the first memory address (0) rather than the end of
the kernel.
Several other MIPS platforms have the same bug, though I am only able
to test malta in qemu. The correct fix is to set dump_avail[] to
describe RAM and in particular to not set dump_avail[0] to the end of
the kernel (kernel_kseg0_end).
Sponsored by: DARPA / AFRL
then ensure the destination directories exist.
Especially if you define OLDTIMEZONES because the mtree pass
doesn't do it for you.
MFC after: 1 week
Sponsored by: Panzura
- Drop uses of 'will'.
- Replace 'to use' with active voice.
- Tidy language around interrupt types and clarify that INTx doesn't
work on VFs.
- Drop leading articles from sysctl/tunable descriptions.
- Tweak the wording of several sysctl/tunable descriptions.
Submitted by: wblock (1, 2, 4)
Sponsored by: Chelsio Communications
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D8812
The removal of TAILQ_FOREACH_SAFE introduced a small race: when the last
thread on a sleepqueue is awoken, it reclaims the sleepqueue and may begin
executing on a different CPU before sleepq_resume_thread() returns. This
leaves a window during which it may go back to sleep and incorrectly be
awoken again by the caller of sleepq_broadcast().
Reported and tested by: pho
MFC after: 3 days
Sponsored by: Dell EMC Isilon
- Pass the correct object to unload_filtees().
- Use a marker to restart iteration after unload_filtees() has returned.
It calls dlclose() and may recursively remove entries from the global
object list, so TAILQ_FOREACH_SAFE is not sufficient.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
rtld drops the bind lock to call fini functions in an object prior to
unmapping it. The new "doomed" state flag prevents the acquisition of new
references for an object while the lock is dropped.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Add a transient reference count to ensure that the phdr argument to the
callback remains valid while the bind lock is dropped.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Current Xen IPI setup functions require that the caller provide a device in
order to obtain the name of the interrupt from it. With early AP startup this
device is no longer available at the point where IPIs are bound, and a KASSERT
would trigger:
panic: NULL pcpu device_t
cpuid = 0
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xffffffff82233a20
vpanic() at vpanic+0x186/frame 0xffffffff82233aa0
kassert_panic() at kassert_panic+0x126/frame 0xffffffff82233b10
xen_setup_cpus() at xen_setup_cpus+0x5b/frame 0xffffffff82233b50
mi_startup() at mi_startup+0x118/frame 0xffffffff82233b70
btext() at btext+0x2c
Fix this by no longer requiring the presence of a device in order to bind IPIs,
and simply use the "cpuX" format where X is the CPU identifier in order to
describe the interrupt.
Reported by: sbruno, cperciva
Tested by: sbruno
X-MFC-With: r310177
Sponsored by: Citrix Systems R&D
sending SIGTERM to the process failed. It is an
unusual situation but it can happen.
- Split deadq_remove() into deadq_remove() and
deadq_removebypid().
- Normalize variable names of struct deadq_entry *.
r310342 fixed non-deterministic nvram_map_gen.awk output and thus a non-
reproducible bhnd(4) build by using a unique sort key.
Go one step further and also remove the srand() call. There's no reason
we want non-deterministic behaviour from this script.
PR: 215422
Reported by: gjb (non-reproducibility of bhnd)
Reported by: lidl (srand as the cause)
Reviewed by: landonf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8857
The problem here is that the archive is too short (< 512 bytes). The
buffer routines, try to read at least 512 bytes, even when we try to
determine what format file we have, which is wrong.
Obtained from: NetBSD (CVS rev 1.26)
MFC after: 5 days
VMware tries to enable this bit to avoid multiple threshold notifications
in case of multiple initiators connected to the same LUN. Unfortunately
their code sends MODE SELECT(6) request with parameter length hardcoded
for the page without any thresholds. Since we have four threshold and our
page is bigger, this attempt fails, that is correct in my understanding.
So all we can do about this now is to report proper error code and hope
VMware fix their code one day.
MFC after: 2 weeks
The libgcc __register_frame and __deregister_frame functions take a
pointer to a set of FDE/CIEs, terminated by an entry where length is 0.
In Apple's libunwind implementation the pointer is taken to be to a
single FDE. I suspect this was just an Apple bug, compensated by Apple-
specific code in LLVM.
See lib/ExecutionEngine/RuntimeDyld/RTDyldMemoryManager.cpp and
http://lists.llvm.org/pipermail/llvm-dev/2013-April/061737.html
for more detail.
This change is based on the LLVM RTDyldMemoryManager.cpp. It should
later be changed to be alignment-safe.
Reported by: dim
Reviewed by: dim
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8869
