Commit Graph

217178 Commits

Author SHA1 Message Date
des
7a7bc643b5 Upgrade to OpenSSH 6.8p1. 2016-01-19 18:28:23 +00:00
emaste
834fb5aff4 Remove local override for .cpp.o and .cpp.po rules
The local build rule used to set -fvisibility=hidden and -fPIC, in
addition to -fexceptions and -D defines that had no effect.

With -fvisibility=hidden and -fPIC in STATIC_CXXFLAGS the standard
bsd.lib.mk rules are suitable for libgcc_s's C++ source.

PR:		206381
Sponsored by:	The FreeBSD Foundation
2016-01-19 17:40:29 +00:00
des
0a44f26c1c Now that we have local modifications in configure.ac and configure, run
autoheader and autoconf to avoid having to patch configure manually.
2016-01-19 17:20:07 +00:00
asomers
5127f80e63 Disallow zvol-backed ZFS pools
Using zvols as backing devices for ZFS pools is fraught with panics and
deadlocks. For example, attempting to online a missing device in the
presence of a zvol can cause a panic when vdev_geom tastes the zvol.  Better
to completely disable vdev_geom from ever opening a zvol. The solution
relies on setting a thread-local variable during vdev_geom_open, and
returning EOPNOTSUPP during zvol_open if that thread-local variable is set.

Remove the check for MUTEX_HELD(&zfsdev_state_lock) in zvol_open. Its intent
was to prevent a recursive mutex acquisition panic. However, the new check
for the thread-local variable also fixes that problem.

Also, fix a panic in vdev_geom_taste_orphan. For an unknown reason, this
function was set to panic. But it can occur that a device disappears during
tasting, and it causes no problems to ignore this departure.

Reviewed by:	delphij
MFC after:	1 week
Relnotes:	yes
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D4986
2016-01-19 17:00:25 +00:00
des
14172c52f8 Upgrade to OpenSSH 6.7p1, retaining libwrap support (which has been removed
upstream) and a number of security fixes which we had already backported.

MFC after:	1 week
2016-01-19 16:18:26 +00:00
hselasky
456370e530 Add optimizing LRO wrapper:
- Add optimizing LRO wrapper which pre-sorts all incoming packets
  according to the hash type and flowid. This prevents exhaustion of
  the LRO entries due to too many connections at the same time.
  Testing using a larger number of higher bandwidth TCP connections
  showed that the incoming ACK packet aggregation rate increased from
  ~1.3:1 to almost 3:1. Another test showed that for a number of TCP
  connections greater than 16 per hardware receive ring, where 8 TCP
  connections was the LRO active entry limit, there was a significant
  improvement in throughput due to being able to fully aggregate more
  than 8 TCP stream. For very few very high bandwidth TCP streams, the
  optimizing LRO wrapper will add CPU usage instead of reducing CPU
  usage. This is expected. Network drivers which want to use the
  optimizing LRO wrapper needs to call "tcp_lro_queue_mbuf()" instead
  of "tcp_lro_rx()" and "tcp_lro_flush_all()" instead of
  "tcp_lro_flush()". Further the LRO control structure must be
  initialized using "tcp_lro_init_args()" passing a non-zero number
  into the "lro_mbufs" argument.

- Make LRO statistics 64-bit. Previously 32-bit integers were used for
  statistics which can be prone to wrap-around. Fix this while at it
  and update all SYSCTL's which expose LRO statistics.

- Ensure all data is freed when destroying a LRO control structures,
  especially leftover LRO entries.

- Reduce number of memory allocations needed when setting up a LRO
  control structure by precomputing the total amount of memory needed.

- Add own memory allocation counter for LRO.

- Bump the FreeBSD version to force recompilation of all KLDs due to
  change of the LRO control structure size.

Sponsored by:	Mellanox Technologies
Reviewed by:	gallatin, sbruno, rrs, gnn, transport
Tested by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D4914
2016-01-19 15:33:28 +00:00
bapt
7eac7d8684 Test for /etc/ssl/cert.pem existence to avoid masking SSL_CA_CERT_PATH
Prior to this patch, unless SSL_CA_CERT_FILE is set in the environment,
libfetch will set the CA file to "/usr/local/etc/cert.pem" if it exists,
and to "/etc/ssl/cert.pem" otherwise. This has the consequence of
masking SSL_CA_CERT_PATH, because OpenSSL will ignore the CA path if a CA
file is set but fails to load (see X509_STORE_load_locations()).

While here, fall back to OpenSSL defaults if neither SSL_CA_CERT_FILE nor
SSL_CA_CERT_PATH are set in the environment, and if neither of the
libfetch default CA files exists.

PR:		193871
Submitted by:	John W. O'Brien <john@saltant.com>
Approved by:	des
MFC after:	1 week
2016-01-19 15:02:37 +00:00
des
43b4a69321 As previously threatened, remove the HPN patch from OpenSSH. 2016-01-19 14:38:20 +00:00
des
23cbd2460d Use 'svn list -R' instead of find, and recognize comments in shell scripts
and {ssh,sshd}_config.
2016-01-19 14:25:22 +00:00
des
1fb8b3ddb1 Recognize *roff comments. 2016-01-19 13:15:57 +00:00
trasz
06259ebaf8 Add "vidcontrol -i active", to print out active vty number,
to be used with eg "vidcontrol -s".

Reviewed by:	emaste@
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D4968
2016-01-19 13:09:20 +00:00
des
a5f4b9478d Update the pre- and post-merge scripts to work correctly after the recent
cleanup.  A round-trip (./freebsd-pre-merge.sh ; ./freebsd-post-merge.sh)
now results in an unchanged working copy.
2016-01-19 12:38:53 +00:00
hselasky
4ed23bd887 Fix an issue where the network adapter could be left in down state
after changing the HW LRO sysctl when previously in up state.

Reviewed by:	gnn
Sponsored by:	Mellanox Technologies
MFC after:	5 days
Differential Revision:	https://reviews.freebsd.org/D4941
2016-01-19 10:24:47 +00:00
hselasky
a3ba15952b Add clarifying comment about CQE zipping.
Reviewed by:	gnn
Sponsored by:	Mellanox Technologies
MFC after:	5 days
Differential Revision:	https://reviews.freebsd.org/D4940
2016-01-19 10:19:33 +00:00
hselasky
0b8f89db10 Declare local variables at top of function.
Reviewed by:	gnn
Sponsored by:	Mellanox Technologies
MFC after:	5 days
Differential Revision:	https://reviews.freebsd.org/D4939
2016-01-19 10:17:24 +00:00
hselasky
de7ff988c8 Allow RX and TX pause frames to be set through ifconfig.
Reviewed by:	gnn
Sponsored by:	Mellanox Technologies
MFC after:	5 days
Differential Revision:	https://reviews.freebsd.org/D4817
2016-01-19 10:10:02 +00:00
kib
6c8e94f78a Adjust i386 comment to match amd64 one after r294311.
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
2016-01-19 08:09:09 +00:00
kib
63cfb09a9a Use ANSI definitions. Wrap long line.
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
2016-01-19 08:08:08 +00:00
kib
bee088bb00 Clear whole XMM register file instead of only XMM0. Also clear x87
registers.  This brings amd64 on par with i386, providing consistent
initial FPU state.

Note that we do not clear any extended state, at least because kernel
does not understand extended state structure and consequences of zero
overwrite after fninit()/fpusave().

Submitted by:	joss.upton@yahoo.com
PR:	206370
MFC after:	2 weeks
2016-01-19 08:04:02 +00:00
arybchik
d365b69637 sfxge: improve error handling in ef10_ev_rx()
Ensure that checksum flags and L3/L4 fields are ignored
if lower level errors are reported in the event.

Remove checks for CRC0_ERR (bad iSCSI header CRC) and
CRC1_ERR (bad iSCSI payload or FCoE/FCoIP CRC) as they
are not used by any existing code.

Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
Differential Revision: https://reviews.freebsd.org/D4975
2016-01-19 06:07:39 +00:00
arybchik
e6feb41fb0 sfxge: select whether to read current or backup partition in Medford A/B scheme
The dynamic config on Medford is stored using two partitions in flash, and at
any time one is the 'current' partition, used to provide the active config,
and the other 'backup' partition is used for writes.  This means that there
are two potential partitions that can be used to service reads, and which is
required can depend on, for example, whether the read is to get the current
contents or to verify a write.

When the partition write lock is held, the default behaviour is to read from
the backup partition, which was wrong for most reads in the common code which
require the current partition. This change allows the current partition to be
read whilst the write lock is held.
There is one read in Manftest which needs the backup partition.

ef10_nvram_partn_read_mode() is created to avoid changing
ef10_nvram_partn_read() which shares a prototype with the equivalent Falcon
and Siena methods.

MC_CMD_NVRAM_READ_IN_V2 adds an extra field, but firmware which doesn't support
it just ignores it.

Submitted by:   Mark Spender <mspender at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
Differential Revision: https://reviews.freebsd.org/D4974
2016-01-19 06:03:44 +00:00
emaste
efa39bda1b Remove local override for .cpp.So rule
The standard bsd.lib.mk rule is suitable for libgcc_s's C++ source.

The local rule had the following non-functional argument differences
or additions:

1. -DSHARED (rather than -DPIC from bsd.lib.mk)

   The C++ sources don't have an #ifdef for either one.

2. -fexceptions

   This is enabled by default for C++ so does not need to be set
   explicitly.

3. -D__GLIBC__=3

   Not used by LLVM libunwind.

4. -DElfW=__ElfN

   LLVM libunwind provides its own definition.

PR:		206381
Differential Revision:	The FreeBSD Foundation
2016-01-19 03:54:38 +00:00
jhibbits
730341be8a Hide most of the PTE initialization and management.
By confining the page table management to a handful of functions it'll be
easier to modify the page table scheme without affecting other functions.
This will be necessary when 64-bit support is added, and page tables become
much larger.
2016-01-19 03:07:25 +00:00
markj
09fb369fc5 Add vrefl(), a locked variant of vref(9).
This API has no in-tree consumers at the moment but is useful to at least
one out-of-tree consumer, and naturally complements existing vnode refcount
functions (vholdl(9), vdropl(9)).

Obtained from:	kib (sys/ portion)
Sponsored by:	EMC / Isilon Storage Division
Differential Revision:	https://reviews.freebsd.org/D4947
Differential Revision:	https://reviews.freebsd.org/D4953
2016-01-18 22:21:46 +00:00
bapt
cf79233816 Import misc.c,v 1.46 from OpenBSD (by espie@)
Yet another missed ferror call
2016-01-18 22:12:07 +00:00
emaste
5d61edf9a6 Update elftc version to 3272M, imported in r292120 2016-01-18 21:53:39 +00:00
imp
9d34214aff Restore ABI variants now that ldconfig groks -soft. In addition, as a
transition mechanism, if we don't have /usr/libsoft, assume that soft
float ABI binaries are the default, so treat them as default binaries.
When we've fully transitioned, it will make no sense to do this stat,
and it will be removed.
2016-01-18 21:40:20 +00:00
imp
4e5086551d Add ldconfig -soft to process the soft float abi libraries and put it
into startup scripts for armv6. It acts much like ldconfig -32 does.
2016-01-18 21:40:18 +00:00
bapt
a4bbea0419 Fix printing multibyte printing when performing a networked finger(1) request
MFC after:	1 week
2016-01-18 20:47:04 +00:00
andrew
c81a82d382 Reset the filesystem cache before reading from a potentially new
filesystem. Without this we only read from the first UFS filesystem we
find, caching the result.

X-MFC with:	The recent boot1.efi changes
2016-01-18 20:22:51 +00:00
joel
dd74f412fc mdoc: sort Xr 2016-01-18 20:21:38 +00:00
emaste
e48513cf4b boot1: correct typo in error message 2016-01-18 18:41:09 +00:00
br
6ac9bf43ac Correct RISC-V exception types. 2016-01-18 17:49:32 +00:00
nwhitehorn
999db941f1 Move RTAS PCI-specific interpretation of the "reg" property of the PCI host
device to the RTAS driver, where it belongs.
2016-01-18 17:27:16 +00:00
ian
2ca2e85e35 Use OF_decode_addr() to create a bus_space tag and handle for the console
on FDT/OFW platforms.

After the refactoring of the powerpc code so that OF_decode_addr() is usable
on all FDT/OFW platforms, this switches uart(4) to using it.

Differential Revision:	https://reviews.freebsd.org/D4675
2016-01-18 17:03:12 +00:00
br
87558a38ae Add RISC-V relocation types.
Reviewed by:	emaste
2016-01-18 16:54:26 +00:00
zbb
5690eff8c2 Enable AIO interface on ARM64 platforms
Add VFS_AIO to generic config to allow using of high-performance
asynchronous disk AIO operation.

Reviewed by:   imp
Obtained from: Semihalf
Sponsored by:  The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D4979
2016-01-18 14:11:34 +00:00
zbb
cc4c2bd6ff Update ThunderX PCIe driver to fit new DTS layout
In recent EFI the DTS entries changed for PCIe controller.
This commit fixes internal PCIe, external is yet TBD.

Submitted by:  Dominik Ermel <der@semihalf.com>
Obtained from: Semihalf
Sponsored by:  The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D4976
2016-01-18 13:31:29 +00:00
smh
0107aadb82 Fix EFI_DEBUG option
Fix broken DPRINTF and wire up EFI_DEBUG so -DEFI_DEBUG to make works.

MFC after:	2 weeks
X-MFC-With:	r293268
Sponsored by:	Multiplay
2016-01-18 12:02:05 +00:00
br
14041097a6 Fix compilation on MIPS (typo introduced in r294227). 2016-01-18 09:36:10 +00:00
delphij
0429a1cd8d MFV r294260:
Fix a wrong assertion in mandoc by applying OpenBSD
main.c,v 1.170 (florian):

Unbreak reading from stdin after recent parse() restructuring.
OK schwarze@
2016-01-18 08:52:09 +00:00
arybchik
834f0a67dd sfxge: regenerate EF10 registers definition for Medford
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
2016-01-18 06:59:00 +00:00
arybchik
40dc0c3cf7 sfxge: fix unused function warning
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
2016-01-18 06:54:15 +00:00
arybchik
c1e866c344 sfxge: regenerate siena_flash.h from FW sources
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
2016-01-18 06:45:45 +00:00
arybchik
30fe2ae4ab sfxge: cleanup: remove extra empty lines
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
2016-01-18 06:39:06 +00:00
arybchik
aa818af152 sfxge: highlight that descriptor cache sizes are configured using TLV now
Submitted by:   Tom Millington <tmillington at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
2016-01-18 06:38:21 +00:00
arybchik
fc17f75468 sfxge: support RFID-selectable segments of dynamic configuration
tlv_partition_header has field *preset* to support RFID-selectable
segments of dynamic configuration

Submitted by:   Mateusz Wrzesinski <mwrzesinski at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
2016-01-18 06:33:15 +00:00
arybchik
452355b916 sfxge: if supported by firmware, use enhanced SET_MAC command to only configure the MTU
This allows an MTU change to be requested on unpriviliged functions
without also setting all the other parameters supported by MC_CMD_SET_MAC.

The enhanced SET_MAC command was introduced in v4_7 firmware.

Submitted by:   Mark Spender <mspender at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
Differential Revision: https://reviews.freebsd.org/D4958
2016-01-18 06:19:28 +00:00
arybchik
e6559d6681 sfxge: convert nvram set_version method to use partition id
Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
2016-01-18 06:18:01 +00:00
arybchik
6d0e72f047 sfxge: convert nvram get_version method to use partition id
Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
2016-01-18 06:16:51 +00:00