Some models of laptops e.g. "X1 Carbon 3rd Gen Thinkpad" have LRM buttons
wired as so called "Synaptic touchpads extended buttons" rather thah real
trackpoint buttons. Handle this case with merging of events from both
sources.
PR: 245877
Reported by: Raichoo <raichoo@googlemail.com>
MFC after: 1 week
[ARM] Only produce qadd8b under hasV6Ops
When compiling for a arm5te cpu from clang, the +dsp attribute is
set. This meant we could try and generate qadd8 instructions where we
would end up having no pattern. I've changed the condition here to be
hasV6Ops && hasDSP, which is what other parts of ARMISelLowering seem
to use for similar instructions.
Fixed PR45677.
This fixes "fatal error: error in backend: Cannot select: t37: i32 =
ARMISD::QADD8b t43, t44" when compiling sys/dev/sound/pcm/feeder_mixer.c
for armv5. For some reason we do not encounter this on head, but this
error popped up while building universes for stable/12.
MFC after: 3 days
Introduce new fib[46]_lookup_debugnet() functions serving as a
special interface for the crash-time operations. Underlying
implementation will try to return lookup result if
datastructures are not corrupted, avoding locking.
Convert debugnet to use fib4_lookup_debugnet() and switch it
to use nexthops instead of rtentries.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D24555
It was broken by r360292 as fib6_lookup() assumes de-embedded addresses
while rtalloc_mpath_fib() requires sockaddr with embedded ones.
New fib6_lookup() transparently supports multipath, hence
remove old RADIX_MPATH condition.
The pf_frag_mtx mutex protects the fragments queue. The fragments queue
is virtualised already (i.e. per-vnet) so it makes no sense to block
jail A from accessing its fragments queue while jail B is accessing its
own fragments queue.
Virtualise the lock for improved concurrency.
Differential Revision: https://reviews.freebsd.org/D24504
We used to have an issue with recursive locking with
net.link.bridge.inherit_mac. This causes us to send an ARP request while
we hold the BRIDGE_LOCK, which used to cause us to acquire the
BRIDGE_LOCK again. We can't re-acquire it, so this caused a panic.
Now that we no longer need to acquire the BRIDGE_LOCK for
bridge_transmit() this should no longer panic. Test this.
PR: 216510
Reviewed by: emaste, philip
MFC after: 2 months
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24251
Run the bridge datapath under epoch, rather than under the
BRIDGE_LOCK().
We still take the BRIDGE_LOCK() whenever we insert or delete items in
the relevant lists, but we use epoch callbacks to free items so that
it's safe to iterate the lists without the BRIDGE_LOCK.
Tests on mercat5/6 shows this increases bridge throughput significantly,
from 3.7Mpps to 18.6Mpps.
Reviewed by: emaste, philip, melifaro
MFC after: 2 months
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24250
If we pass an anchor name which doesn't exist pfr_table_count() returns
-1, which leads to an overflow in mallocarray() and thus a panic.
Explicitly check that pfr_table_count() does not return an error.
Reported-by: syzbot+bd09d55d897d63d5f4f4@syzkaller.appspotmail.com
Reviewed by: melifaro
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24539
The new tests have more complete setup and cleanup, are more granular, and
correctly annotate expected failures and skipped tests. A follow-up commit
will resolve a conflict with the fusefs tests (bug 244229).
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24257
r360292 introduced the wrong order, resulting in returned
nhops not being referenced, despite the fact that references
were requested. That lead to random GPF after using SCTP sockets.
Special defined macro like IPV[46]_SCOPE_GLOBAL will be introduced
soon to reduce the chance of putting arguments in wrong order.
Reported-by: syzbot+5c813c01096363174684@syzkaller.appspotmail.com
While at it use strtol() instead of atoi() to support hexadecimal
numbers aswell as 10-base numbers.
Submitted by: Marc Veldman <marc@bumblingdork.com>
PR: 245899
MFC after: 1 week
Sponsored by: Mellanox Technologies
Release kernels have no KDB backends enabled, so they discard an NMI
if it is not due to a hardware failure. This includes NMIs from
IPMI BMCs and hypervisors.
Furthermore, the interaction of panic_on_nmi, kdb_on_nmi, and
debugger_on_panic is confusing.
Respond to all NMIs according to panic_on_nmi and debugger_on_panic.
Remove kdb_on_nmi. Expand the meaning of panic_on_nmi by making
it a bitfield. There are currently two bits: one for NMIs due to
hardware failure, and one for all others. Leave room for more.
If panic_on_nmi and debugger_on_panic are both true, don't actually panic,
but directly enter the debugger, to allow someone to leave the debugger
and [hopefully] resume normal execution.
Reviewed by: kib
MFC after: 2 weeks
Relnotes: yes: machdep.kdb_on_nmi is gone; machdep.panic_on_nmi changed
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24558
The latter needs the former, but with a multi-job build on a fast
machine, the race is sometimes lost. This leads to "ld: error: unable to
find library -lsbuf", when linking libgeom.so.
Submitted by: kevans
MFC after: 3 days
Store the attached regulator in a tailq to later find them in ofw_map.
While here, do not attempt to attach a regulator without a name, a node
might exists but if it doesn't have a name the regulator is unused.
MFC after: 1 month
In r326576 ("use @@@ instead of @@ in __sym_default"), an earlier version of
the phabricator-discussed patch was inadvertently committed. The commit
message claims that @@@ means that weak is not needed, but that was due to a
misunderstanding of the use of weak symbols in this context by the submitted
in the first draft of the patch; the description text was not updated to
match the discussion. As discussed in phabricator, weak is needed for
symbol interposing because of the behavior of our rtld, and is widely used
elsewhere in libc.
This partial revert restores the approved version of the patch and permits
symbol interposing for openat.
Reported by: Raymond Ramsden <rramsden AT isilon.com>
Reviewed by: dim, emaste, kib (2017)
Discussed with: kib (2020)
Differential Revision: https://reviews.freebsd.org/D11653
If pin is switched from fixed function to GPIO, it should have prepared
direction, pull-up/down and default value before function gets switched.
Otherwise we may produce unwanted glitch on output pin.
Right order of drive strength settings is questionable, but I think that
is slightly safer to do it also before function switch.
This fixes serial port corruption observed after DT 5.6 import.
MFC after: 1 week
This change is build on top of nexthop objects introduced in r359823.
Nexthops are separate datastructures, containing all necessary information
to perform packet forwarding such as gateway interface and mtu. Nexthops
are shared among the routes, providing more pre-computed cache-efficient
data while requiring less memory. Splitting the LPM code and the attached
data solves multiple long-standing problems in the routing layer,
drastically reduces the coupling with outher parts of the stack and allows
to transparently introduce faster lookup algorithms.
Route caching was (re)introduced to minimise (slow) routing lookups, allowing
for notably better performance for large TCP senders. Caching works by
acquiring rtentry reference, which is protected by per-rtentry mutex.
If the routing table is changed (checked by comparing the rtable generation id)
or link goes down, cache record gets withdrawn.
Nexthops have the same reference counting interface, backed by refcount(9).
This change merely replaces rtentry with the actual forwarding nextop as a
cached object, which is mostly mechanical. Other moving parts like cache
cleanup on rtable change remains the same.
Differential Revision: https://reviews.freebsd.org/D24340
The macros CAST_USER_ADDR_T() and CAST_DOWN() were used for the Mac OS/X
port. The first of these macros was a no-op for FreeBSD and the second
is no longer used.
This patch gets rid of them. It also deletes the "mbuf_t" typedef which
is no longer used in the FreeBSD code from nfskpiport.h
This patch should not change semantics.
With the inclusion of caroot bits, we'll need to also rehash on update as we
do in mergemaster/etcupdate.
If certctl's installed on the system, just unconditionally rehash. This
isn't an expensive operation, and we can refine it to compare
INDEX-{OLD,NEW} later if we really want to.
Reviewed by: emaste, allanjude
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21805
IEEE80211_MESH_RTCMD_ADD was invoking memcmp() to validate the
supplied address directly on the user pointer rather than first doing
a copyin() and validating the copied value.
IEEE80211_MESH_RTCMD_DELETE was passing the user pointer directly to
ieee80211_mesh_rt_del() rather than copying the user buffer into a
temporary kernel buffer.
Reviewed by: brooks, kib
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24562
It turns out that currently mandoc(1) is not handling Fl in Ss
correctly (maybe it never was). Let's just replace "Fl S \&Ss ..."
with "-S ...". After all, this subsection title is stylized anyway, so Fl
is not that helpful.
MFC after: 2 weeks
pmap_emulate_modify() was assuming that no changes to the pmap could
take place between the TLB signaling the fault and
pmap_emulate_modify()'s acquisition of the pmap lock, but that's clearly
not even true in the uniprocessor case, nevermind the SMP case.
Submitted by: Nathaniel Filardo <nwf20@cl.cam.ac.uk>
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24523
MipsDoTLBMiss() will load a segmap entry or pde, check that it isn't
zero, and then chase that pointer to a physical page. If that page has
been freed in the interim, it will read garbage and go on to populate
the TLB with it.
This can happen because pmap_unwire_ptp zeros out the pde and
vm_page_free_zero()s the ptp (or, recursively, zeros out the segmap
entry and vm_page_free_zero()s the pdp) without interlocking against
MipsDoTLBMiss(). The pmap is locked, and pvh_global_lock may or may not
be held, but this is not enough. Solve this issue by inserting TLB
shootdowns within _pmap_unwire_ptp(); as MipsDoTLBMiss() runs with IRQs
deferred, the IPIs involved in TLB shootdown are sufficient to ensure
that MipsDoTLBMiss() sees either a zero segmap entry / pde or a non-zero
entry and the pointed-to page still not freed.
Submitted by: Nathaniel Filardo <nwf20@cl.cam.ac.uk>
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24491
For such mappings we need to dump 512 page table pages, not one, and
they need to be included in the pmap size recorded in the minidump
header.
MFC after: 2 weeks
Sponsored by: Juniper Networks, Klara Inc.
The comment referenced a non-existent function, and these minidump
implementations already buffer discontiguous physical data pages by
mapping them into a single VA range that gets passed to the dump device,
so there is no real advantage in batching calls to blk_write().
The RISC-V and MIPS minidump implementations still write a page at a
time and so would benefit from some form of batching.
MFC after: 2 weeks
Sponsored by: Juniper Networks, Klara Inc.
These mappings are never visible to userspace as they get replaced when
the amd64 pmap is bootstrapped, but there is no need to set PG_U in the
first place.
Reviewed by: alc, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24547
Some of the consumers in-base may make it enticing enough to ensure that
COMPAT_FREEBSD12, which is notably a fairly light option at the moment, is
included in custom kernel configs.
Suggested by: netchild
Casualty: mail jail
This stops the compiler from using the x18 register. Some UEFI
implementations assume this will be preserved when calling the Boot
Services.
MFC after: 2 weeks
Sponsored by: Innovate UK
Kernel prints the device announcement before the attach method is
called, so if the correct description is not set by the probe method,
then the announcement would have an incorrect one.
MFC after: 1 week
Use DRIVER_MODULE_ORDERED(SI_ORDER_ANY) so that ig4's ACPI attachment
happens after iicbus and acpi_iicbus drivers are registered.
I have seen a problem where iicbus attached under ig4 instead of
acpi_iicbus when ig4.ko was loaded with kldload. I believe that that
happened because ig4 driver was a first driver to register, it attached
and created an iicbus child. Then iicbus driver was registered and,
since it was the only driver that could attach to the iicbus child
device, it did exactly that. After that acpi_iicbus driver was
registered. It would be able to attach to the iicbus device, but it was
already attached, so nothing happened.
MFC after: 2 weeks
