advancing. Read from the timer before attaching to be sure it advances
in 1 us. Since the slowest rate allowed by the spec is 10 MHz, the
timer is guaranteed to change in this interval if it is working.
Tested by: Rui Paulo
Approved by: re
MFC after: 3 days
pam_sm_open_session(), avoiding false negatives when no tty is present.
Submitted by: Todd C. Miller <millert@courtesan.com>
Approved by: re (rwatson)
MFC after: 2 weeks
- Synchronized audit event list to Solaris, picking up the *at(2) system call
definitions, now required for FreeBSD and Linux. Added additional events
for *at(2) system calls not present in Solaris.
Obtained from: TrustedBSD Project
Approved by: re (hrs)
history since the last import:
OpenBSM 1.0 alpha 15
- Fix bug when processing in_addr_ex tokens.
- Restore the behavior of printing the string/text specified while
auditing arg32 tokens.
- Synchronized audit event list to Solaris, picking up the *at(2) system call
definitions, now required for FreeBSD and Linux. Added additional events
for *at(2) system calls not present in Solaris.
- Bugs in auditreduce(8) fixed allowing partial date strings to be used in
filtering events.
Approved by: re (hrs)
MFC after: 3 weeks
Obtained from: TrustedBSD Project
- remove duplicate #include <sys/priv.h> that is not under
#ifdef FreeBSD version to allow compile on 6.1
- static analysis changes per the cisco SA tool including:
o some SA_IGNORE comments
o some checks for NULL before unlock.
o type corrections int -> size_t
- Fix it so sctp_alloc_asoc takes a thread/proc argument. Without this
we pass a NULL in to bind on implicit assoc setup and crash :-(
Approved by: re@freebsd.org(Ken Smith)
or replace (i.e., zdump) the environment after a call to setenv(), putenv()
or unsetenv() has been made, a few changes were made.
- getenv() will return the value from the new environ array.
- setenv() was split into two functions: __setenv() which is most of the
previous setenv() without checks on the name and setenv() which
contains the checks before calling __setenv().
- setenv(), putenv() and unsetenv() will unset all previous values and
call __setenv() on all entries in the new environ array which in turn
adds them to the end of the envVars array. Calling __setenv() instead
of setenv() is done to avoid the temporary replacement of the '=' in a
string with a NUL byte. Some strings may be read-only data.
Added more regression checks for clearing the environment array.
Replaced gettimeofday() with getrusage() in timing regression check for
better accuracy.
Fixed an off-by-one bug in __remove_putenv() in the use of memmove(). This
went unnoticed due to the allocation of double the number of environ
entries when building envVars.
Fixed a few spelling mistakes in the comments.
Reviewed by: ache
Approved by: wes
Approved by: re (kensmith)
4KB pages as i386, data structures that just fit in one page on i386 (and
on 64 bit architectures with 8KB pages) can be distributed over two pages
on amd64. This is a porblem in the case of the Symbios driver, since the
SCRIPTS engine in the SCSI chip operates on physical addresses and needs
physically contiguous memory. Earlier patches used contigmalloc on amd64,
but this version replaces part of a structure by a pointer to that data.
In order to not introduce an extra indirection for other architectures,
the change has been made conditional on __amd64__.
Earlier attempts to repair this problem are removed (i.e. the macros that
made amd64 use contigmalloc). The fix was submitted by Jan Mikkelsen and
modified by me to only affect amd64.
PR: 89550
Submitted by: janm at transactionware dot com (Jan Mikkelsen)
Approved by: re (Hiroki Sato)
MFC after: 2 weeks
This gives a very large speedup for small block sizes (in my tests,
about 5 times for write and 3 times for read with a block size of 512,
if clustering is possible) and a moderate speedup for the moderatatly
large block sizes that should be used on non-small media (4K is the
best size in most cases, and the speedup for that is about 1.3 times
for write and 1.2 times for read). mmap() should benefit from clustering
like read()/write(), but the current implementation of vm only supports
clustering (at least for getpages) if the fs block size is >= PAGE SIZE.
msdosfs is now only slightly slower than ffs with soft updates for
writing and slightly faster for reading when both use their best block
sizes. Writing is slower for msdosfs because of more sync writes.
Reading is faster for msdosfs because indirect blocks interfere with
clustering in ffs.
The changes in msdosfs_read() and msdosfs_write() are simpler merges
of corresponding code in ffs (after fixing some style bugs in ffs).
msdosfs_bmap() needs fs-specific code. This implementation loops
calling a lower level bmap function to do the hard parts. This is a
bit inefficient, but is efficient enough since msdsfs_bmap() is only
called when there is physical i/o to do.
Approved by: re (hrs)
In msdosfs_read(), mainly reorder the main loop to the same order as in
ffs_read().
In msdosfs_write() and extendfile(), use vfs_bio_clrbuf() instead of
clrbuf(). I think this just just a bogus optimization, but ffs always
does it and msdosfs already did it in one place, and it is what I've
tested.
In msdosfs_write(), merge good bits from a comment in ffs_write(), and
fix 1 style bug.
In the main comment for msdosfs_pcbmap(), improve wording and catch
up with 13 years of changes in the function. This comment belongs in
VOP_BMAP.9 but that doesn't exist.
In msdosfs_bmap(), return EFBIG if the requested cluster number is out
of bounds instead of blindly truncating it, and fix many style bugs.
Approved by: re (hrs)
11b channel is not found, e.g. Atheros 5211.
Reported by: matteo
Problem outlined by: thompsa
Reviewed by: sam, thompsa
Approved by: re (kensmith), sam (mentor)
Tested by: matteo (an early version)
We allocate coda_ctlvp when /coda is mounted, but never release it.
During the unmount this vnode was marked as UNMOUNTING and when venus
is started a second time the system would hang, possibly waiting for
the old vnode to disappear.
So now we call vrele on the control vnode when file system is unmounted
to drop the reference we got during the mount. I'm pretty sure it is
also necessary to not skip the handling in coda_inactive for the control
vnode, it seems like that is the place we actually get rid of the vnode
once the refcount has dropped to 0.
Submitted by: Jan Harkes <jaharkes at cs dot cmu dot edu>
Approved by: re (kensmith)
filt_ttyrdetach() etc would later attempt to dereference cdev->si_tty,
causing a 0xdeadc0de dereference. Change kn_hook value from cdev to
struct tty to avoid dereferencing freed cdev.
In ttygone(), wake up select(), sigio and kevent() users in addition
to the queue sleepers.
Return EV_EOF from kevent filters if TS_GONE is set.
Submitted by: peter
Tested by: Peter Holm
Approved by: re (kensmith)
MFC after: 2 weeks
- Adjust lock_profiling stubs semantic in the hard functions in order to be
more accurate and trustable
- As for sx locks, disable shared paths for lock_profiling. Actually,
lock_profiling has a subtle race which makes results caming from shared
paths not completely trustable. A macro stub (LOCK_PROFILING_SHARED) can
be actually used for re-enabling this paths, but is currently intended
for developing use only.
- style(9) fixes
Approved by: jeff, kmacy, jhb[1]
Approved by: re
[1] Had initial reservations not shared by others, conceded
in the end.
1. Rewrite the backward scan. Specifically, reverse the order in which
pages are allocated so that upon failure it is never necessary to
free pages that were just allocated. Moreover, any allocated pages
can be put to use. This makes the backward scan behave just like the
forward scan.
2. Eliminate an explicit, unsynchronized check for low memory before
calling vm_page_alloc(). It serves no useful purpose. It is, in
effect, optimizing the uncommon case at the expense of the common
case.
Approved by: re (hrs)
MFC after: 3 weeks
interrupt that is shared with other devices(e.g. USB) in system and
provide a new tunable "hw.msk.legacy_intr" to activate the legacy
interrupt handler. Setting the tunable automatically disables MSI
for msk(4). Previously msk(4) used adoptive polling with taskqueue(9)
as all msk(4) hardwares I know supports MSI. However, there are cases
that MSI couldn't be used on some hardwares due to bugs in MSI
implementatins.
Tested by: Li-Lun Wang < llwang AT infor DOT org >
Approved by: re (kensmith)
UDPv4 features to UDPv6:
- Add MAC checks on delivery and MAC labeling on transmit.
- Check for (and reject) datagrams with destination port 0.
- For multicast delivery, check the source port only if the socket being
considered as a destination has been connected.
- Implement UDP blackholing based on net.inet.udp.blackhole.
- Add a new ICMPv6 unreachable reply rate limiting category for failed
delivery attempts and implement rate limiting for UDPv6 (submitted by
bz).
Approved by: re (kensmith)
Reviewed by: bz
machines.
- Leave the long-term load balancer running by default once per second.
- Enable stealing load from the idle thread only when the remote processor
has more than two transferable tasks. Setting this to one further
improves buildworld. Setting it higher improves mysql.
- Remove the bogus pick_zero option. I had not intended to commit this.
- Entirely disallow migration for threads with SRQ_YIELDING set. This
balances out the extra migration allowed for with the load balancers.
It also makes pick_pri perform better as I had anticipated.
Tested by: Dmitry Morozovsky <marck@rinet.ru>
Approved by: re
properly. We have to temporarily unlock the TDQ lock so we can lock
the thread and add it to the run queue. This is used only for KSE.
- When we add a thread from the tdq_move() via sched_balance() we need to
ipi the target if it's sitting in the idle thread or it'll never run.
Reported by: Rene Landan
Approved by: re
- Add custom .c wrappers for the firmware, rather than the standard
firmware(9) generated firmware objects to work around toolchain
problems on ia64 involving linking objects produced by
ld -b -binary into the kernel.
- Move from using Myricom's ".dat" firmware blobs to using Myricom's
zlib compressed ".h" firmware header files. This is done to
facilitate the custom wrappers, and saves a fair amount of wired
memory in the case where the firmware is built in, or preloaded.
- Fix two compile issues in mxge which only appear on non-i386/amd64.
Reviewed by: mlaier, mav (earlier version with just zlib support)
Glanced at by: sam
Approved by: re (kensmith)
IPV6_IPSEC_POLICY always visible again. This unbreaks some
third party user space applications.
PR: 114491
Reported by: sumikawa
Reviewed by: sumikawa
Approved by: re (hrs)
should finally fix fsx test case.
The printf's added here would be eventually turned into
assertions.
Submitted by: Mingyan Guo (mostly)
Approved by: re (tmpfs blanket)
new code and third party modules which try to depend on it.
- Initialize sched_lock in sched_4bsd.c.
- Declare sched_lock in sparc64 pmap.c and assert that we're compiling
with SCHED_4BSD to prevent accidental crashes from running ULE. This
is the sole remaining file outside of the scheduler that uses the
global sched_lock.
Approved by: re
