There are a few places that use hand crafted versions of the macros
from sys/netinet/in.h making it difficult to actually alter the
values in use by these macros. Correct that by replacing handcrafted
code with proper macro usage.
Reviewed by: karels, kristof
Approved by: bde (mentor)
MFC after: 3 weeks
Sponsored by: John Gilmore
Differential Revision: https://reviews.freebsd.org/D19317
- Remove issues that no longer apply thanks to devfs
- Add language pointing out devfs's role and referencing its config
- Add a "historical notes" section and move discussion of block vs character devs to it, including pointing out the removal of block devs
- Modernize some examples
MFC after: 1 week
PR: 236970
Submitted by: andrew@tao173.riddles.org.uk
Reviewed by: 0mp
Differential Revision: https://reviews.freebsd.org/D19799
The code enabled when "DEBUG" is defined uses mem_alloc(), which is a
malloc(.., M_RPC, M_WAITOK | M_ZERO), but then calls gss_release_buffer()
which does a free(.., M_GSSAPI) to free the memory.
This patch fixes the problem by replacing mem_alloc() with a
malloc(.., M_GSSAPI, M_WAITOK | M_ZERO).
This bug affects almost no one, since the sources are not normally built
with "DEBUG" defined.
Submitted by: peter@ifm.liu.se
MFC after: 2 weeks
- init, init -R
- onetime, onetime -R
- 512 and 4k sectors
- encryption only
- encryption and authentication
- configure -r/-R for detached providers
- configure -r/-R for attached providers
- all keys allocated (10, 20 and 30MB provider sizes)
- keys allocated on demand (10, 20 and 30PB provider sizes)
- reading and writing to provider after expansion (10-30MB only)
- checking if metadata in old location is cleared.
Obtained from: Fudo Security
provider grows, GELI will expand automatically and will move the metadata
to the new location of the last sector.
This functionality is turned on by default. It can be turned off with the
-R flag, but it is not recommended - if the underlying provider grows and
automatic expansion is turned off, it won't be possible to attach this
provider again, as the metadata is no longer located in the last sector.
If the automatic expansion is turned off and the underlying provider grows,
GELI will only log a message with the previous size of the provider, so
recovery can be easier.
Obtained from: Fudo Security
from 1.0.0:
Add "continuation" flag, to allow multiple "xo" invocations in a single line of output (#58)
Add --top-wrap to make top-level JSON wrappers
Add --{open,close}-{list,instace} options
Add xo_xml_leader(), to detect use of some bogus XML tags. It's still bad form, but it's a little safer now
Avoid call to xo_write before xo_flush, since the latter calls the former
Check return code from xo_flush_h properly (<0) (FreeBSD Bug 236935)
For JSON output, avoid newline before a container's close brace (#62)
Merge branch 'text_only' of https://github.com/zvr/libxo into zvr-text_only
Use XO_USE_INT_RETURN_CODES, not USE_INT_RETURN_CODES
add docs for --continuation
add docs for --not-first
call xo_state_set_flags before values and close containers; add XOIF_MADE_OUTPUT flag to track state; make proper empty JSON objects in xo_finish
color_map code has to be #ifdef'd out, since the struct definition
correct xo_flush_func_t (doesn't use xo_ssize_t)
make depth change for --top-wrap only for JSON
fix to handle --top-wrap in "xo" by being more consistent with handling trailing newlines
fix to handle text-only version #64 (from zvr)
fix xo_buf_has_room for round up to the next XO_BUFSIZ, not just add XO_BUFSIZ to the size (FreeBSD Bug 236937)
update docs for new "xo" options
update functions to use xo_ssize_t
update test cases
from 1.0.1:
Add EINTEGRITY to .pot files under test/gettext/ (fix from FreeBSD)
from 1.0.2:
handle failure from xo_vnsprintf; don't add -1 to "rc"
PR: 236937, 236935
Submitted by: phil
Reported by: Alfonso S. Siciliano <alfix86@gmail.com>
MFC after: 2 weeks
If MACHINE_ARCH doesn't match TARGET_ARCH, and we're not in the special
case of building i386 images on an amd64 host, we need to pull in the
qemu-user-static package; this allows us to run some commands inside
the VM disk image chroot, most notably to install packages.
Reviewed by: gjb
MFC after: 2 weeks
Sponsored by: FreeBSD/EC2 patreon (https://www.patreon.com/cperciva)
In r337703 DTS files were updated to Linux 4.18, including Linux commit
4d8b032d3c03f4e9788a18bbb51b10e6c9e8a56b which removed the `phy_id`
property from am335x-bone-common (as the property was deprecated).
Use `phy-handle` via fdt_get_phyaddr, keeping the existing code as a
fallback for old DTBs.
PR: 236624
Submitted by: manu, Gerald Aryeetey <aryeeteygerald_rogers.com>
Reported by: Gerald Aryeetey
Reviewed by: manu
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19814
The value was changed from int to bool. Since the new type
is smaller, the rest of the variable in the caller was left
unitialized.
PR: 236714
Reported by: trasz
Diagnosed by: markj
Sponsored by: The FreeBSD Foundation
To use bectl in an example, when one creates a new boot environment with
either `bectl create <be>` or `bectl create -e <otherbe> <be>`, libbe will
take a snapshot of the original boot environment to clone. Previously, this
used %F-%T date format as the snapshot name, but this has some limitations-
attempting to create multiple boot environments in quick succession may
collide if done within the same second.
Tack a serial onto it to reduce the chances of a collision... we could still
collide if multiple processes/threads are creating boot environments at the
same time, but this is likely not a big concern as this has only been
reported as occurring in freebsd-ci setup.
MFC after: 3 days
Despite the call to vtruncbuf() from detrunc(), which results in
zeroing part of the partial page after EOF, there still is a
possibility to retain the stale data which is revived on file
enlargement. If the filesystem block size is greater than the page
size, partial block might keep other after-EOF pages wired and they
get reused then. Fix it by zeroing whole part of the partial buffer
after EOF, not relying on vnode_pager_setsize().
PR: 236977
Reported by: asomers
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
bsnmpclient(3).
snmp_parse_server() function accepts string where some fields can be
omitted: [trans::][community@][server][:port]
"trans" field can be "udp", "udp6", "dgram" and "stream".
"community" can be empty string, if it is omitted, the default value
will be used. For read_community it is "public", for write_comminity
it is "private". "server" field can be hostname, IPv4 address or IPv6
address. IPv6 address should be specified in brackets "[]".
If port is omitted, the default value "snmp" will be used for "udp"
and "udp6" transports. So, now for bsnmpget(1) and bsnmwalk(1) it is
not required to specify all fields in argument of '-s' option. E.g.
# bsnmpget -s 127.1 sysName.0
# bsnmpget -s "udp::127.1" sysName.0
# bsnmpget -s "udp::public@127.1" sysName.0
# bsnmpget -s "udp::public@127.1:161" sysName.0
# bsnmpget -s "udp::[::1]" sysName.0
# bsnmpget -s "udp6::[::1]" sysName.0
# bsnmpget -s "[fe80::1%lo0]" sysName.0
PR: 236664
Reported by: olivier
MFC after: 1 month
Harvesting has to compete for the TPM chip with userspace.
Before this change the callout could hijack an unread buffer
causing a userspace call to the TPM to fail.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: delphij
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19712
The e5500 has an FPU, but lacks the optional fsqrt instruction. This
instruction gets emulated in the kernel, but the emulation uses stale data,
from the last switch out, and does not return the result of the operation
immediately. Fix both of these conditions by saving and restoring the FPRs
around the emulation point.
MFC after: 1 week
MFC with: r345829
The current approach of injecting manifest into mac_veriexec is to
verify the integrity of it in userspace (veriexec (8)) and pass its
entries into kernel using a char device (/dev/veriexec).
This requires verifying root partition integrity in loader,
for example by using memory disk and checking its hash.
Otherwise if rootfs is compromised an attacker could inject their own data.
This patch introduces an option to parse manifest in kernel based on envs.
The loader sets manifest path and digest.
EVENTHANDLER is used to launch the module right after the rootfs is mounted.
It has to be done this way, since one might want to verify integrity of the init file.
This means that manifest is required to be present on the root partition.
Note that the envs have to be set right before boot to make sure that no one can spoof them.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19281
This fix was committed less than 2 months after the code was forked into the
powerpc kernel. Though powerpc doesn't use quad-precision floating point,
or need it for emulation, the changes do look like correctness fixes
overall.
This was found while trying to get fsqrt emulation working on e5500, which
does have a real FPU, but lacks the fsqrt instruction. This is not the
complete fix, the rest is to be committed separately.
MFC after: 1 week
When a new client structure was allocated, it was added to the list
so that it was visible to other threads before the expiry time was
initialized, with only a single reference count.
The caller would increment the reference count, but it was possible
for another thread to decrement the reference count to zero and free
the structure before the caller incremented the reference count.
This could occur because the expiry time was still set to zero when
the new client structure was inserted in the list and the list was
unlocked.
This patch fixes the race by initializing the reference count to two
and initializing all fields, including the expiry time, before inserting
it in the list.
Tested by: peter@ifm.liu.se
PR: 235582
MFC after: 2 weeks
Before this I suppose it was impossible load CAM-based NVMe as module.
Plus this appeared to be needed to build r345815 without NVMe driver.
MFC after: 2 weeks
interrupt enable are not fatal.
The firmware sets up all the interrupt enables based on run time
configuration, which means the information in the enables is more
accurate than what's compiled into the driver. This change also allows
the fatal bits to be updated without any changes in the driver in some
cases.
MFC after: 1 week
Sponsored by: Chelsio Communications
to no longer be displayed. This was because the reimplementation of
setup_buffer() did not copy the previous contents into any reallocated
buffer.
Reported by: James Wright <james.wright@jigsawdezign.com>
PR: 236947
MFC after: 3 days
[objc-gnustep] Use .init_array not .ctors when requested.
This doesn't make a difference most of the time but FreeBSD/ARM
doesn't run anything in the .ctors array.
This should help with updating the libobjc2 port for armv7.
Requested by: theraven
Upstream PR: https://github.com/gnustep/libobjc2/issues/83
MFC after: 3 days
In particular:
- suspend the mount around vflush() to avoid new writes come after the
vnode is processed;
- flush pending metadata updates (mostly node times);
- remap all rw mappings of files from the mount into ro.
It is not clear to me how to handle writeable mappings on rw->ro for
tmpfs best. Other filesystems, which use vnode vm object, call
vgone() on vnodes with writers, which sets the vm object type to
OBJT_DEAD, and keep the resident pages and installed ptes as is. In
particular, the existing mappings continue to work as far as
application only accesses resident pages, but changes are not flushed
to file.
For tmpfs the vm object of VREG vnodes also serves as the data pages
container, giving single copy of the mapped pages, so it cannot be set
to OBJT_DEAD. Alternatives for making rw mappings ro could be either
invalidating them at all, or marking as CoW.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19737
In particular, this fixes atimes still changing for ro tmpfs.
tmpfs_set_status() gains tmpfs_mount * argument.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19737
This patch adds a new table begemotSnmpdTransInetTable that uses the
InetAddressType textual convention and can be used to create listening
ports for IPv4, IPv6, zoned IPv6 and based on DNS names. It also supports
future extension beyond UDP by adding a protocol identifier to the table
index. In order to support this gensnmptree had to be modified.
Submitted by: harti
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16654
o Fix bug in PLIC_ENABLE macro when irq >= 32.
Tested on the real hardware, which is HiFive Unleashed board.
Thanks to SiFive, Inc. for the board provided.
Reviewed by: markj
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19775
* Crank the OPAL state machine during the receive loop, to make sure the
pollers are executed
* Add a proper detach function, so the module can be unloaded and reloaded
at runtime.
It still doesn't reliably work 100% of the time on POWER9, and it appears
timing and/or cache related. It may work on POWER8 now.
MFC after: 2 weeks
