DR #289[0] came down and gcc4.2.1 was on the wrong side of history.
Partially revert GCC r42574 (just remove the error) to rectify the parse
bug to match Clang and other compliant C99 compilers.
An example declaration gcc tripped on before this fix:
void foobar(int [static 1]);
An example declaration gcc did not trip on before this fix:
void foobar(int name[static 1]);
Bump __FreeBSD_cc_version.
[0]: http://www.open-std.org/JTC1/SC22/WG14/www/docs/dr_289.htm
Reported by: allanjude
Sponsored by: EMC / Isilon Storage Division
In r277943, the efinet_match() routine was changed to use an off by one
when matching network interfaces. The effect was that using "net1"
actually used the device attached to "net0".
Digging into the hardware that needed this workaround more, I found that
UEFI was creating two simple network protocol devices for each physical
NIC. The first device was a "raw" Ethernet device and the second device
was a "IP" device that used the IP protocol on top of the underlying
"raw" device. The PXE code in the firmware used the "IP" device to pull
across the loader.efi, so currdev was set to "net1" when booting from the
physical interface "net0". (The loaded image's device handle referenced
the "IP" device that "net1" claimed.)
However, the IP device isn't suitable for doing raw packet I/O (and the
current code to open devices exclusively actually turns the "IP" devices
off on these systems).
To fix, change the efinet driver to only attach to "raw" devices. This
is determined by fetching the DEVICE_PATH for each handle which supports
the simple network protocol and examining the last node in the path. If
the last node in the path is a MAC address, the device is assumed to be
a "raw" device and is added as a 'netX' device. If the last node is not
a MAC address, the device is ignored.
However, this causes a new problem as the device handle associated with
the loaded image no longer matches any of the handles enumerated by
efinet for systems that load the image via the "IP" device. To handle
this case, expand the logic that resolves currdev from the loaded image
in main(). First, the existing logic of looking for a handle that
matches the loaded image's handle is tried. If that fails, the device
path of the handle that loaded the loaded image is fetched via
efi_lookup_image_devpath(). This device path is then walked from the
end up to the beginning using efi_handle_lookup() to fetch the handle
associated with a path. If the handle is found and is a known handle,
then that is used as currdev. The effect for machines that load the
image via the "IP" device is that the first lookup fails (the handle
for the "IP" device isn't claimed by efinet), but walking up the
image's device path finds the handle of the raw MAC device which is used
as currdev.
With these fixes in place, the hack to subtract 1 from the unit can now
be removed, so that setting currdev to 'net0' actually uses 'net0'.
PR: 202097
Tested by: ambrisko
Sponsored by: Cisco Systems
This will be more accurate as the actual name is provided if ran
from an absolute path in do_execve().
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Passing MAKEOBJDIRPREFIX to the main prog build (rescue) would confuse
WITH_AUTO_OBJ and cause it to create a recursed object directory that
then broke the actual prog build. This is normally not a problem since
we do not call 'make -f prog.mk obj' before building anything in it.
Crunchgen(1) also assumes that if -o is not passed then if an object
directory does not already exist then it should build in the source
directories. The normal buildworld process will have already ran 'make
obj' in each of the component directories so this is not a problem.
With WITH_AUTO_OBJ though this is not the case. So we must tell
crunchgen(1) that MK_AUTO_OBJ=yes will create the directory and to not
require it be present before generating its Makefile.
Sponsored by: EMC / Isilon Storage Division
This would otherwise disallow using meta files from a foreign build that
spread them around in directories outside our own .OBJDIR.
Sponsored by: EMC / Isilon Storage Division
The main prog has a dependency on the submake targets to ensure they are
built. From bsd.crunchgen.mk though we already have our own dependency
on 'make objs' so there is no need for another one. Crunchgen(1) is
doing the right thing here so it is not modified.
This also prevents the CC fix tainting the submake environment with
META_MODE and causing rebuilds. The CC passed is is only intended for
the main prog itself.
Sponsored by: EMC / Isilon Storage Division
This fixes --sysroot and other CFLAGS/LDFLAGS not being respected
in the crunchgen build since it is not including bsd.sys.mk and
other files. For example, this fixes building rescue itself without
--sysroot and other CFLAGS.
Sponsored by: EMC / Isilon Storage Division
Since multiple files are generated from one build command, only
the first to run will actually generate a .meta file. This fix
prevents 'required but missing' rebuilds on each target.
Sponsored by: EMC / Isilon Storage Division
Because bmake defaults to .../share/mk now, this code was not doing anything
to help objdir builds (such as the rescue build). Export the same default.
Sponsored by: EMC / Isilon Storage Division
This allows using META_MODE directly from the kernel build directory.
This also allows removing a hack from the DIRDEPS_BUILD kernel target.
Sponsored by: EMC / Isilon Storage Division
This was previously set after the hook and only if auxargs were present.
Now always provide it if possible.
MFC after: 2 weeks
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D6546
This allows an EVENTHANDLER(process_exec) hook to see if the new image
will cause credentials to change whether due to setgid/setuid or because
of POSIX saved-id semantics.
This adds 3 new fields into image_params:
struct ucred *newcred Non-null if the credentials will change.
bool credential_setid True if the new image is setuid or setgid.
This will pre-determine the new credentials before invoking the image
activators, where the process_exec hook is called. The new credentials
will be installed into the process in the same place as before, after
image activators are done handling the image.
MFC after: 2 weeks
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D6544
While here, fix the various net driver callbacks to return early instead
of crashing if this fails. (The 'init' callback from the netif interface
doesn't return an error if the protocol lookup fails.)
Sponsored by: Cisco Systems
These efipart layer did several devpath related operations inline. This
just switches it over to using shared code for working with device paths.
Sponsored by: Cisco Systems
Lookup the DEVICE_PATH for each EFI network device handle and output the
string description using printf with '%S'. To honor the pager, the newline
at the end of each line is still output with pager_output().
Sponsored by: Cisco Systems
- efi_lookup_devpath() uses the DEVICE_PATH_PROTOCOL to obtain the
DEVICE_PATH for a given EFI handle.
- efi_lookup_image_devpath() uses the LOADED_IMAGE_DEVICE_PATH_PROTOCOL
to lookup the device path of the device used to load a loaded image.
- efi_devpath_name() uses the DEVICE_PATH_TO_TEXT_PROTOCOL to generate
a string description of a device path. The returned string is a CHAR16
string that can be printed via the recently added '%S' format in
libstand's printf(). Note that the returned string is returned in
allocated storage that should be freed by calling
efi_free_devpath_name().
- efi_devpath_last_node() walks a DEVICE_PATH returning a pointer to the
final node in the path (not counting the terminating node). That is,
it returns a pointer to the last meaninful node in a DEVICE_PATH.
- efi_devpath_trim() generates a new DEVICE_PATH from an existing
DEVICE_PATH. The new DEVICE_PATH does not include the last
non-terminating node in the original path. If the original DEVICE_PATH
only contains the terminating node, this function returns NULL.
The caller is responsible for freeing the returned DEVICE_PATH via
free().
- efi_devpath_handle() attempts to find a handle that corresponds to a
given device path. However, if nodes at the end of the device path do
not have valid handles associated with them, this function will return
a handle that matches a node earlier in the device path. In particular,
this function returns a handle for the node closest to the end of the
device path which has a valid handle.
Sponsored by: Cisco Systems
Centre for Advanced Internet Architectures
Implementing AQM in FreeBSD
* Overview <http://caia.swin.edu.au/freebsd/aqm/index.html>
* Articles, Papers and Presentations
<http://caia.swin.edu.au/freebsd/aqm/papers.html>
* Patches and Tools <http://caia.swin.edu.au/freebsd/aqm/downloads.html>
Overview
Recent years have seen a resurgence of interest in better managing
the depth of bottleneck queues in routers, switches and other places
that get congested. Solutions include transport protocol enhancements
at the end-hosts (such as delay-based or hybrid congestion control
schemes) and active queue management (AQM) schemes applied within
bottleneck queues.
The notion of AQM has been around since at least the late 1990s
(e.g. RFC 2309). In recent years the proliferation of oversized
buffers in all sorts of network devices (aka bufferbloat) has
stimulated keen community interest in four new AQM schemes -- CoDel,
FQ-CoDel, PIE and FQ-PIE.
The IETF AQM working group is looking to document these schemes,
and independent implementations are a corner-stone of the IETF's
process for confirming the clarity of publicly available protocol
descriptions. While significant development work on all three schemes
has occured in the Linux kernel, there is very little in FreeBSD.
Project Goals
This project began in late 2015, and aims to design and implement
functionally-correct versions of CoDel, FQ-CoDel, PIE and FQ_PIE
in FreeBSD (with code BSD-licensed as much as practical). We have
chosen to do this as extensions to FreeBSD's ipfw/dummynet firewall
and traffic shaper. Implementation of these AQM schemes in FreeBSD
will:
* Demonstrate whether the publicly available documentation is
sufficient to enable independent, functionally equivalent implementations
* Provide a broader suite of AQM options for sections the networking
community that rely on FreeBSD platforms
Program Members:
* Rasool Al Saadi (developer)
* Grenville Armitage (project lead)
Acknowledgements:
This project has been made possible in part by a gift from the
Comcast Innovation Fund.
Submitted by: Rasool Al-Saadi <ralsaadi@swin.edu.au>
X-No objection: core
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6388
Pressing the PEK (power enable key) will shutdown the board.
Some events are reported to devd via system "PMU" and subsystem
"Battery", "AC" and "USB" such as connected/disconnected.
Some sensors values (power source voltage/current) are reported via
sysctl (dev.axp209_pmu.X.)
It also expose a gpioc node usable in kernel and userland. Only 3 of
the 4 GPIO are exposed (The GPIO3 is different and mostly unused on
boards). Most popular boards uses GPIO1 as a sense pin for OTG power.
Add a dtsi file that adds gpio-controller capability to the device as
upstream doesn't defined it and include it in our custom DTS.
Reviewed by: jmcneill
Approved by: cognet (mentor)
Differential Revision: https://reviews.freebsd.org/D6135
Though the buffer used by l64a() is initialized with null bytes,
repetetive calls may end up having trailing garbage of previous
invocations because we don't end up terminating the string.
Instead of importing NetBSD's fix, use this opportunity to simplify this
function dramatically, for example by just storing the Base64 character
set in a string. There is also no need to do the bitmasking, as we can
just use the proper integer type from <stdint.h>.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D6511
A follow-up to r300773. Nothing in the kernel uses those definitions, but
apparently libmd includes the sys/md45 headers. Fix the build.
Reported by: gjb
Pointy-hat: cem
Sponsored by: EMC / Isilon Storage Division
Use the C99 'static' keyword to hint to the compiler IVs and output digest
sizes. The keyword informs the compiler of the minimum valid size for a given
array. Obviously not every pointer can be validated (i.e., the compiler can
produce false negative but not false positive reports).
No functional change. No ABI change.
Sponsored by: EMC / Isilon Storage Division
