- Add a per compatible configuration struct
- Not all SoC uses the same size for DMA transfert, add this into the
configuration data
- Use new timing mode for some SoC (A64 mmc)
- Auto calibrate clock for A64 mmc/emmc
- A64 mmc controller need masking of data0
- Add support for vmmc/vqmmc regulator
- Add more capabilities, r/w speed is better for eMMC
- MMC_CAP_SIGNALING_180 gives weird result so do not enable it for now.
- Add new register documented in H3/A64 user manual
Tested-On: Pine64-LTS (A64), eMMC still doesn't work
Tested-On: A64-Olinuxino (A64), sd and eMMC are working
Tested-On: NanoPi Neo Plus2 (H5), sd and eMMC are working
Tested-On: OrangePi PC2 (H5), sd only (no eMMC)
Tested-On: OrangePi One (H3), sd only (no eMMC)
Tested-On: BananaPi M2 (A31s), sd only (no eMMC)
RTC clock hardware frequently uses BCD numbers. Currently the low-level
bcd2bin() and bin2bcd() functions will KASSERT if given out-of-range BCD
values. Every RTC driver must implement its own code for validating the
unreliable data coming from the hardware to avoid a potential kernel panic.
This change introduces two new functions, clock_bcd_to_ts() and
clock_ts_to_bcd(). The former validates its inputs and returns EINVAL if any
values are out of range. The latter guarantees the returned data will be
valid BCD in a known format (4-digit years, etc).
A new bcd_clocktime structure is used with the new functions. It is similar
to the original clocktime structure, but defines the fields holding BCD
values as uint8_t (uint16_t for year), and adds a PM flag for handling hours
using AM/PM mode.
PR: 224813
Differential Revision: https://reviews.freebsd.org/D13730 (no reviewers)
previous behavior is preserved (the CG checksum is fixed). We're just
noisy about it now.
Reviewed by: kirk@
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13884
6.0.0 (branches/release_60 r321788). Upstream has branched for the
6.0.0 release, which should be in about 6 weeks. Please report bugs and
regressions, so we can get them into the release.
Please note that from 3.5.0 onwards, clang, llvm and lldb require C++11
support to build; see UPDATING for more information.
MFC after: 3 months
using a new macro PHYS_TO_DMAP, which deliberately has the same name as the
equivalent macro on amd64. This also sets the stage for moving the direct
map to another base address.
Focus on code where we are doing multiplications within malloc(9). None of
these is likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
Since we have no control over the name, the MAKEDEV_CHECKNAME flag must be
used to return an error on an invalid (to devfs) name instead of panicing.
r305900 that originally added this feature also introduced a few other bugs:
- Proper locking not performed
- Theoretically broke the expectation that the control event buffer would
not span more than one pages, but did not update the CTASSERT that was
in place to prevent this. However, since the struct virtio_console_control
and the bulk buffer together were quite small, this could not have happened.
Also workaround an QEMU VirtIO spec violation in that it includes the NUL
terminator in the buffer length when the spec says it is not included.
PR: 223531
MFC after: 1 week
This is in contrib code but since we only have mallocarray(9) in current
we will not upstream this.
This effectively brings back r327934, which was reverted to correct the
log message.
Attaching syscon_generic earlier than BUS_PASS_DEFAULT makes it more
difficult for specific syscon drivers to attach to the syscon node and to
get ordering right. Further discussion yielded the following set of
decisions:
- Move syscon_generic to BUS_PASS_DEFAULT
- If a platform needs a syscon with different attach order or probe
behavior, it should subclass syscon_generic and match on the SoC specific
compat string
- When we come across a need for a syscon that attaches earlier but only
specifies compatible = "syscon", we should create a syscon_exclusive driver
that provides generic access but probes earlier and only matches if "syscon"
is the only compatible. Such fdt nodes do exist in the wild right now, but
we don't really use them at the moment.
Additionally:
- Any syscon provider that has needs any more complex than a spinlock solely
for syscon access and a single memory resource should subclass syscon
directly rather than attempting to subclass syscon_generic or add complexity
to it. syscon_generic's attach/detach methods may be made public should the
need arise to subclass it with additional attach/detach behavior.
We introduce aw_syscon(4) that just subclasses syscon_generic but probes
earlier to meet our requirements for if_awg and implements #2 above for this
specific situation. It currently only matches a64/a83t/h3 since these are
the only platforms that really need it at the time being.
Discussed with: ian
Reviewed by: manu, andrew, bcr (manpages, content unchanged since review)
Differential Revision: https://reviews.freebsd.org/D13793
[Sema] Suppress warnings for C's zero initializer
Patch by S. Gilles!
Differential Revision: https://reviews.llvm.org/D28148
Pull in r314838 from upstream clang trunk (by Richard Smith):
Suppress -Wmissing-braces warning when aggregate-initializing a
struct with a single field that is itself an aggregate.
In C++, such initialization of std::array<T, N> types is guaranteed
to work by the standard, is completely idiomatic, and the "suggested"
alternative from Clang was technically invalid.
Together, these suppress unneeded "suggest braces around initialization
of subobject" warnings for C++11 initializer lists.
MFC after: 3 days
that userland doesn't switch partitions on its own, compare against
the partition mmcsd_ioctl_cmd() is going to switch to (based on the
device node used) rather than the currently selected partition.
executed, the interrupt aggregation code might have disabled the
SDHCI_INT_DMA_END and/or SDHCI_INT_RESPONSE bits in slot->intmask
and the SDHCI_SIGNAL_ENABLE register respectively. So when restoring
the interrupt masks based on the previous contents of slot->intmask
in sdhci_exec_tuning(), ensure that the SDHCI_INT_ENABLE register
doesn't lose these two bits.
While at it and in the spirit of r327339, let sdhci_tuning_intmask()
set the tuning error and re-tuning interrupt bits based on the
SDHCI_TUNING_ENABLED rather than the SDHCI_TUNING_SUPPORTED flag
being set, i. e. only when (re-)tuning is actually used. Currently,
this changes makes no net difference, though.
