9341-4i controller was to ensure that scatter/gather lists are ended with
an end-of-list marker. Both the mrsas and Linux megaraid_sas drivers use
this marker with Invader cards as well, so we do the same thing, though
it is apparently not strictly necessary.
Reviewed by: ambrisko
Tested by: ambrisko (Invader card)
MFC after: 3 weeks
Sponsored by: Sandvine Inc.
driver as version 8.037.00 for RTL8168{E-VL,EP,F,G,GU} and RTL8111B. This
makes reception of packets work with the RTL8168G (HW rev. 0x4c000000) in
my Shuttle DS47.
- Consistently use RL_MSI_MESSAGES.
In joint forces with: yongari
MFC after: 5 days
are mostly useful for debugging.
- hw.pci.clear_bars ignores all firmware-assigned ranges for BARs when
set.
- hw.pci.clear_pcib ignores all firmware-assigned ranges for PCI-PCI
bridge I/O windows when set.
MFC after: 1 week
Hetzel <swhetzel@gmail.com> on the -doc mailing list.
Also modify the Author section to be clear that I wrote the man page,
not gptboot.
MFC after: 3 days
Delaying isp_reqodx update, we should be ready to update it every time
we read it. Otherwise requests using several indexes may be requeued
ndefinitely without ever updating the variable.
MFC after: 3 days
a sub-node of nexus (ofwbus) rather than direct attach under nexus. This
fixes FDT on x86 and will make coexistence with ACPI on ARM systems easier.
SPARC is unchanged.
Reviewed by: imp, ian
- Similar to the hack for bootinfo32.c in userboot, define
_MACHINE_ELF_WANT_32BIT in the load_elf32 file handlers in userboot.
This allows userboot to load 32-bit kernels and modules.
- Copy the SMAP generation code out of bootinfo64.c and into its own
file so it can be shared with bootinfo32.c to pass an SMAP to the i386
kernel.
- Use uint32_t instead of u_long when aligning module metadata in
bootinfo32.c in userboot, as otherwise the metadata used 64-bit
alignment which corrupted the layout.
- Populate the basemem and extmem members of the bootinfo struct passed
to 32-bit kernels.
- Fix the 32-bit stack in userboot to start at the top of the stack
instead of the bottom so that there is room to grow before the
kernel switches to its own stack.
- Push a fake return address onto the 32-bit stack in addition to the
arguments normally passed to exec() in the loader. This return
address is needed to convince recover_bootinfo() in the 32-bit
locore code that it is being invoked from a "new" boot block.
- Add a routine to libvmmapi to setup a 32-bit flat mode register state
including a GDT and TSS that is able to start the i386 kernel and
update bhyveload to use it when booting an i386 kernel.
- Use the guest register state to determine the CPU's current instruction
mode (32-bit vs 64-bit) and paging mode (flat, 32-bit, PAE, or long
mode) in the instruction emulation code. Update the gla2gpa() routine
used when fetching instructions to handle flat mode, 32-bit paging, and
PAE paging in addition to long mode paging. Don't look for a REX
prefix when the CPU is in 32-bit mode, and use the detected mode to
enable the existing 32-bit mode code when decoding the mod r/m byte.
Reviewed by: grehan, neel
MFC after: 1 month
allow mrsas(4) from LSI to attach to newer LSI cards that are support by
mrsas(4). If mrsas(4) is not loaded into the system at boot then mfi(4)
will always attach. If a modified mrsas(4) is loaded in the system. That
modification is return "-30" in it's probe since that is between
BUS_PROBE_DEFAULT and BUS_PROBE_LOW_PRIORITY.
This option is controller by a new probe flag "MFI_FLAGS_MRSAS" in mfi_ident
that denotes cards that should work with mrsas(4). New entries that should
have this option.
This is the first step to get mrsas(4) checked into FreeBSD and to avoid
collision with people that use mrsas(4) from LSI. Since mfi(4) takes
priority, then mrsas(4) users need to rebuild GENERIC. Using the
.disabled="1" method doesn't work since that blocks attaching and the
probe gave it to mfi(4).
Discussed with: LSI (Kashyap Desai)
Prior to this change the cached value of 'pm_eptgen' was tracked per-vcpu
and per-hostcpu. In the degenerate case where 'N' vcpus were sharing
a single hostcpu this could result in 'N - 1' unnecessary TLB invalidations.
Since an 'invept' invalidates mappings for all VPIDs the first 'invept'
is sufficient.
Fix this by moving the 'eptgen[MAXCPU]' array from 'vmxctx' to 'struct vmx'.
If it is known that an 'invept' is going to be done before entering the
guest then it is safe to skip the 'invvpid'. The stat VPU_INVVPID_SAVED
counts the number of 'invvpid' invalidations that were avoided because
they were subsumed by an 'invept'.
Discussed with: grehan
the output buffer wasn't being cleared between the inflate() calls,
producing zeroed output after the first inflate() call.
This fixes the read of mkuzip(8) images with geom_uncompress(4).
Reviewed by: ray
Approved by: adrian (mentor)
the old way was to store pcpu in a register, and get curthread from pcpu,
which is not very atomic, and led to issues if the thread was migrated
to another core between the time we got the pcpu address and the time we
got curthread.
Instead, we now store curthread where pcpu used to be store, and we
calculate the pcpu address based on the cpu id.
map a fraction of the pages that were fetched by vm_pager_get_pages() from
secondary storage. Now, we map them all in order to avoid future soft
faults. This effect is most evident when a memory-mapped file is accessed
sequentially. Previously, there were 6 soft faults for every hard fault.
Now, these soft faults are eliminated.
Sponsored by: EMC / Isilon Storage Division
