pmap_ts_referenced() is not always appropriate for checking whether or
not pages have been referenced because it clears any reference bits
that it encounters. For example, in mincore(), clearing the reference
bits has two negative consequences. First, it throws off the activity
count calculations performed by the page daemon. Specifically, a page
on which mincore() has called pmap_ts_referenced() looks less active
to the page daemon than it should. Consequently, the page could be
deactivated prematurely by the page daemon. Arguably, this problem
could be fixed by having mincore() duplicate the activity count
calculation on the page. However, there is a second problem for which
that is not a solution. In order to clear a reference on a 4KB page,
it may be necessary to demote a 2/4MB page mapping. Thus, a mincore()
by one process can have the side effect of demoting a superpage
mapping within another process!
This driver was written by Alexander Pohoyda and greatly enhanced
by Nikolay Denev. I don't have these hardwares but this driver was
tested by Nikolay Denev and xclin.
Because SiS didn't release data sheet for this controller, programming
information came from Linux driver and OpenSolaris. Unlike other open
source driver for SiS190/191, sge(4) takes full advantage of TX/RX
checksum offloading and does not require additional copy operation in
RX handler.
The controller seems to have advanced offloading features like VLAN
hardware tag insertion/stripping, TCP segmentation offload(TSO) as
well as jumbo frame support but these features are not available
yet. Special thanks to xclin <xclin<> cs dot nctu dot edu dot tw>
who sent fix for receiving VLAN oversized frames.
about inacessible or wrong mcontext, and for dreaded "kernel trap with
interrupts disabled" situation. The later is changed when trap is
generated from user mode (shall never be ?).
Normalize the messages to include both pid and thread name.
MFC after: 1 week
domain clock, 8 programmable PMC.
- Westmere based CPU (Xeon 5600, Corei7 980X) support.
- New man pages with events list for core and uncore.
- Updated Corei7 events with Intel 253669-033US December 2009 doc.
There is some removed events in the documentation, they have been
kept in the code but documented in the man page as obsolete.
- Offcore response events can be setup with rsp token.
Sponsored by: NETASQ
A nice thing about POSIX 2008 is that it finally standardizes a way to
obtain file access/modification/change times in sub-second precision,
namely using struct timespec, which we already have for a very long
time. Unfortunately POSIX uses different names.
This commit adds compatibility macros, so existing code should still
build properly. Also change all source code in the kernel to work
without any of the compatibility macros. This makes it all a less
ambiguous.
I am also renaming st_birthtime to st_birthtim, even though it was a
local extension anyway. It seems Cygwin also has a st_birthtim.
of another process. Modify pmap_promote_pde() to handle this. (This is
not a problem on amd64 due to implementation differences.)
Reported by: jh@
MFC after: 1 week
to the image_params struct instead of several members of that struct
individually. This makes it easier to expand its arguments in the future
without touching all platforms.
Reviewed by: jhb
AMD Family 10h Erratum 383, to i386.
Enable machine check exceptions by default, just like r204913 for amd64.
Enable superpage promotion only if the processor actually supports large
pages, i.e., PG_PS.
MFC after: 2 weeks
checksums as the base acpi(4) driver. This fixes a problem where the MADT
parser would reject the MADT table during early boot causing the MP Table
to be, but then the acpi(4) driver would attach and use non-SMP interrupt
routing.
Tested by: Alastair Hogge agh of coolrhaug com
MFC after: 1 week
that we support I486 and I586 CPUs in the GENERIC kernel, users wants these
support would have to build a custom kernel to explicitly disable SSE
anyways.
MFC after: 1 month
for parsing model-specific and other fields in machine check events
including the global machine check capabilities and status registers,
CPU identification, and the FreeBSD CPU ID.
- Report these added fields in the console log of a machine check so that
a record structure can be reconstituted from the console messages.
- Parse new architectural errors including memory controller errors.
MFC after: 1 week
COMPAT_43TTY enables the sgtty interface. Even though its exposure has
only been removed in FreeBSD 8.0, it wasn't used by anything in the base
system in FreeBSD 5.x (possibly even 4.x?). On those releases, if your
ports/packages are less than two years old, they will prefer termios
over sgtty.
given the advent of the extended family and extended model fields. The
values are printed in hex to match their common usage in documentation.
Submitted by: Alexander Best
MFC after: 1 week
correctly initialized and just then assign to softclock/profclock.
Right now, some atrtc seems reporting strange diagnostic error* making the
current pattern bogus.
In order to do that cleanly, lapic_setup_clock(), on both ia32 and amd64,
now accepts as arguments the desired sources to handle, and returns the
actual ones (LAPIC_CLOCK_NONE is forbidden because otherwise there is no
meaning in calling such function).
This allows to bring out into commont x86 code the handling part for
machdep.lapic_allclocks tunable, which is retained.
Sponsored by: Sandvine Incorporated
Tested by: yongari, Richard Todd
<rmtodd at ichotolot dot servalan dot com>
MFC: 3 weeks
X-MFC: r202387, 204309
that the virtual machine monitor has enabled machine check exceptions.
Unfortunately, on AMD Family 10h processors the machine check hardware
has a bug (Erratum 383) that can result in a false machine check exception
when a superpage promotion occurs. Thus, I am disabling superpage
promotion when the FreeBSD kernel is running as a guest operating system
on an AMD Family 10h processor.
Reviewed by: jhb, kib
MFC after: 3 days
shared and generalized between our current amd64, i386 and pc98.
This is just an initial step that should lead to a more complete effort.
For the moment, a very simple porting of cpufreq modules, BIOS calls and
the whole MD specific ISA bus part is added to the sub-tree but ideally
a lot of code might be added and more shared support should grow.
Sponsored by: Sandvine Incorporated
Reviewed by: emaste, kib, jhb, imp
Discussed on: arch
MFC: 3 weeks
This patch basically gives us the best of both worlds. Instead of
forcing the compiler to emulate GNU-style inline semantics even though
we're using ISO C99, it will only use GNU-style inlining when the
compiler is configured that way (__GNUC_GNU_INLINE__).
Tested by: jhb
the 'debugging' section of any HEAD kernel and enable for the mainstream
ones, excluding the embedded architectures.
It may, of course, enabled on a case-by-case basis.
Sponsored by: Sandvine Incorporated
Requested by: emaste
Discussed with: kib
This may not be entirely correct either, but the existing check is
bogus. I have both a C3 and a C7 that fail this check, but work fine.
MFC after: 2 weeks
page table page instead of creating a temporary mapping to it.
Set the PG_G bit on the page table entries that implement the KPTmap.
Locore initializes the unused portions of the NKPT kernel page table
pages that it allocates to zero. So, pmap_bootstrap() needn't zero
the page table entries referenced by CMAP1 and CMAP3.
Simplify pmap_set_pg().
MFC after: 10 days
syscall arguments are collected before ptracestop() is called. As a
consequence, debugger cannot modify syscall or its arguments.
For i386, amd64 and ia32 on amd64 MD syscall(), reread syscall number
and arguments after ptracestop(), if debugger modified anything in the
process environment. Since procfs stopeven requires number of syscall
arguments in p_xstat, this cannot be solved by moving stop/trace point
before argument fetching.
Move the code to read arguments into separate function
fetch_syscall_args() to avoid code duplication. Note that ktrace point
for modified syscall is intentionally recorded twice, once with original
arguments, and second time with the arguments set by debugger.
PT_TO_SCX stop is executed after cpu_syscall_set_retval() already.
Reported by: Ali Polatel <alip exherbo org>
Briefly discussed with: jhb
MFC after: 3 weeks
Remove __gnu89_inline.
Now that we use C99 almost everywhere, just use C99-style in the pmap
code. Since the pmap code is the only consumer of __gnu89_inline, remove
it from cdefs.h as well. Because the flag was only introduced 17 months
ago, I don't expect any problems.
Reviewed by: alc
It was backed out, because it prevented us from building kernels using a
7.x compiler. Now that most people use 8.x, there is nothing that holds
us back. Even if people run 7.x, they should be able to build a kernel
if they run `make kernel-toolchain' or `make buildworld' first.
- ATPIC, on pc98 is never defined somewhere, differently from i386.
Turn its compilation to be conditional as i386 does. [1]
[0] Reported by: nyan
[1] Submitted by: nyan
LAPIC may lead to aliasing for softclock and profclock because frequencies
are sized in order to fit mainly hardclock.
atrtc used to take care of the softclock and profclock and it does still
do, if the LAPIC can't handle the clocks properly.
Revert the change when the LAPIC started taking charge of all three of
them and let atrtc handle softclock and profclock if not explicitly
requested. Such request can be made setting != 0 the new tunable
machdep.lapic_allclocks or if the new device ATPIC is not present
within the i386 kernel config (atrtc is linked to atpic presence).
Diagnosed by: Sandvine Incorporated
Reviewed by: jhb, emaste
Sponsored by: Sandvine Incorporated
MFC: 3 weeks
of allocating what ever the user asks for up to "ngroups_max + 1". On
systems with large values of kern.ngroups this will be more efficient.
The now redundant check that the array is large enough in
kern_getgroups() is deliberate to allow this change to be merged to
stable/8 without breaking potential third party consumers of the API.
Reported by: bde
MFC after: 28 days
kern.ngroups+1. kern.ngroups can range from NGROUPS_MAX=1023 to
INT_MAX-1. Given that the Windows group limit is 1024, this range
should be sufficient for most applications.
MFC after: 1 month
I/O port access is implemented on Itanium by reading and writing to a
special region in memory. To hide details and avoid misaligned memory
accesses, a process did I/O port reads and writes by making a MD system
call. There's one fatal problem with this approach: unprivileged access
was not being prevented. /dev/io serves that purpose on amd64/i386, so
employ it on ia64 as well. Use an ioctl for doing the actual I/O and
remove the sysarch(2) interface.
Backward compatibility is not being considered. The sysarch(2) approach
was added to support X11, but support for FreeBSD/ia64 was never fully
implemented in X11. Thus, nothing gets broken that didn't need more work
to begin with.
MFC after: 1 week
Specifically, where locore had created large page mappings for the kernel,
the wrong vm page array entries were being initialized. The vm page array
entries for the pages containing the kernel were being initialized instead
of the vm page array entries for page table pages.
MFC after: 1 week
was changed from a small page boundary to a large page boundary. As
a consequence pmap_kmem_choose() became a pointless waste of address
space. Eliminate it.
sys/conf/makeLINT.mk to only do certain things for certain
architectures.
Note that neither arm nor mips have the Makefile there, thus
essentially not (yet) supporting LINT. This would enable them
do add special treatment to sys/conf/makeLINT.mk as well chosing
one of the many configurations as LINT.
This is a hack of doing this and keeping it in a separate commit
will allow us to more easily identify and back it out.
Discussed on/with: arch, jhb (as part of the LINT-VIMAGE thread)
MFC after: 1 month
sys/vmmeter.h: warning: shadowed declaration is here
machine/cpufunc.h: In function 'insw':
machine/cpufunc.h: warning: declaration of 'cnt' shadows a global declaration
..snip..
This replaces d_mmap() with the d_mmap2() implementation and also
changes the type of offset to vm_ooffset_t.
Purge d_mmap2().
All driver modules will need to be rebuilt since D_VERSION is also
bumped.
Reviewed by: jhb@
MFC after: Not in this lifetime...
- use utility macros for CPU family/model checking
- limit Intel P6 quirk to pre-Nehalem models (taken from OpenSolaris)
- add AMD GartTblWkEn quirk for families 0Fh and 10h; I haven't experienced
any problems without the quirk but both Linux and OpenSolaris do this
- slightly re-arrange quirk code to provide for the future generalization
and separation of vendor-specific quirk functions
Reviewed by: jhb
MFC after: 1 week
- directly print mca information in case we fail to allocate memory
for a record
- include bank number into mca record
- print raw mca status value for extended information
Reviewed by: jhb
MFC after: 10 days
The hardware is compliant with WDRT specification, so I originally
considered including generic WDRT watchdog support, but decided
against it, because I couldn't find anyone to the code for me.
WDRT seems to be not very popular.
Besides, generic WDRT porbably requires a slightly different driver
approach.
Reviewed by: des, gavin, rpaulo
MFC after: 3 weeks
the filter as we do from bpf_filter()[1].
- Revert experimental use of contigmalloc(9)/contigfree(9). It has no
performance benefit over malloc(9)/free(9)[2].
Requested by: rwatson[1]
Pointed out by: rwatson, jhb, alc[2]
the generated binary and remove page size limitation for userland.
- Use contigmalloc(9)/contigfree(9) instead of malloc(9)/free(9) to make
sure the generated binary aligns properly and make it physically contiguous.
I have found that it is not only desktop CPUs problem. but mobile also.
Probably AP on laptops just started initially at lower frequency, hiding
the problem.
Disable frequency validation by default, for systems with more then one CPU,
until we can implement it properly. It looks like making more harm now then
benefits. Add 'hw.est.strict' loader tunable to control it.
Now my iXsystems Invincibook is able to run at 800MHz lowest frequency,
instead of 1200MHz before, when 800MHz was incorrectly reported invalid.
CPU core, only pair of them. As result, both cores are running on highest
one of requested frequencies, and that is reported by status register.
Such behavior confuses frequency validation logic, as it runs on only
one core, as SMP is not yet launched, making EIST completely unusable.
To workaround this, add check for validation result. If we haven't found
at least two usable frequencies, then probably we are looking bad and have
to trust data provided by BIOS as-is.
functions are selfcontained (ie. they touch only isa_dma.c static variables
and hardware) so a private lock is sufficient to prevent races. This changes
only i386/amd64 while there are also isa_dma functions for ia64/sparc64.
Sparc64 are ones empty stubs and ia64 ones are unused as ia64 does not
have isa (says marcel).
This patch removes explicit locking of Giant from a few drivers (there
are some that requires this but lack ones - this patch fixes this) and
also removes the need for implicit locking of Giant from attach routines
where it's provided by newbus.
Approved by: ed (mentor, implicit)
Reviewed by: jhb, attilio (glanced by)
Tested by: Giovanni Trematerra <giovanni.trematerra gmail com>
IA64 clue: marcel
map_invalidate_cache_range() even if CPU is not Intel.
- This tunable can be set to -1 (default), 0 and 1. -1 is same as
current behavior, which automatically disable CLFLUSH on Intel CPUs
without CPUID_SS (should be occured on Xen only). You can specify 1
when this panic happened on non-Intel CPUs (such as AMD's). Because
disabling CLFLUSH may reduce performance, you can try with setting 0
on Intel CPUs without SS to use CLFLUSH feature.
Reviewed by: kib
Reported by: karl, kuriyama
Related to: kern/138863
ocassions, memory barriers semantic is not honoured by the hardware
itself. As a result, some random breakage can happen in uninvestigable
ways (for further explanation see at the content of the commit itself).
As long as just a specific familly is bugged of an entire architecture
is broken, a complete fix-up is impratical without harming to some
extents the other correct cases.
Considering that (and considering the frequency of the bug exposure)
just print out a warning message if the affected machine is identified.
Pointed out by: Samy Al Bahra <sbahra at repnop dot org>
Help on wordings by: jeff
MFC: 3 days
There is no need to use the lower 4 bits of the unit number to store the
device type number. Just use 0 and 1 to distinguish them. devfs also
guarantees that there can never be an open call on a device that has a
unit number different to 0 and 1, so there is no need to check for this
in open().
partially fixed on amd64 earlier. Rather than forcing linux_mmap_common()
to use a 32-bit offset, have it accept a 64-bit file offset. This offset
is then passed to the real mmap() call. Rather than inventing a structure
to hold the normal linux_mmap args that has a 64-bit offset, just pass
each of the arguments individually to linux_mmap_common() since that more
closes matches the existing style of various kern_foo() functions.
Submitted by: Christian Zander @ Nvidia
MFC after: 1 week
while in kernel mode, and later changing signal mask to block the
signal, was fixed for sigprocmask(2) and ptread_exit(3). The same race
exists for sigreturn(2), setcontext(2) and swapcontext(2) syscalls.
Use kern_sigprocmask() instead of direct manipulation of td_sigmask to
reschedule newly blocked signals, closing the race.
Reviewed by: davidxu
Tested by: pho
MFC after: 1 month
the memory or D-cache, depending on the semantics of the platform.
vm_sync_icache() is basically a wrapper around pmap_sync_icache(),
that translates the vm_map_t argumument to pmap_t.
o Introduce pmap_sync_icache() to all PMAP implementation. For powerpc
it replaces the pmap_page_executable() function, added to solve
the I-cache problem in uiomove_fromphys().
o In proc_rwmem() call vm_sync_icache() when writing to a page that
has execute permissions. This assures that when breakpoints are
written, the I-cache will be coherent and the process will actually
hit the breakpoint.
o This also fixes the Book-E PMAP implementation that was missing
necessary locking while trying to deal with the I-cache coherency
in pmap_enter() (read: mmu_booke_enter_locked).
The key property of this change is that the I-cache is made coherent
*after* writes have been done. Doing it in the PMAP layer when adding
or changing a mapping means that the I-cache is made coherent *before*
any writes happen. The difference is key when the I-cache prefetches.
handlers. This is primarily intended as a way to allow devices that use
multiple interrupts (e.g. MSI) to meaningfully distinguish the various
interrupt handlers.
- Add a new BUS_DESCRIBE_INTR() method to the bus interface to associate
a description with an active interrupt handler setup by BUS_SETUP_INTR.
It has a default method (bus_generic_describe_intr()) which simply passes
the request up to the parent device.
- Add a bus_describe_intr() wrapper around BUS_DESCRIBE_INTR() that supports
printf(9) style formatting using var args.
- Reserve MAXCOMLEN bytes in the intr_handler structure to hold the name of
an interrupt handler and copy the name passed to intr_event_add_handler()
into that buffer instead of just saving the pointer to the name.
- Add a new intr_event_describe_handler() which appends a description string
to an interrupt handler's name.
- Implement support for interrupt descriptions on amd64 and i386 by having
the nexus(4) driver supply a custom bus_describe_intr method that invokes
a new intr_describe() MD routine which in turn looks up the associated
interrupt event and invokes intr_event_describe_handler().
Requested by: many
Reviewed by: scottl
MFC after: 2 weeks
by looking at the bases used for non-relocatable executables by gnu ld(1),
and adjusting it slightly.
Discussed with: bz
Reviewed by: kan
Tested by: bz (i386, amd64), bsam (linux)
MFC after: some time
specify their own version of atomic_cmpset_* which could have been
different than the membar version.
Right now, however, FreeBSD is bound mostly to GCC-like compilers and
it is desired to add new support and compat shim mostly when there is
a real necessity, in order to avoid too much compatibility bloats.
In this optic, bring back atomic_cmpset_{acq, rel}_* to be the same as
atomic_cmpset_* and unwind the atomic_cmpset_barr_* introduction.
Requested by: jhb
Reviewed by: jhb
Tested by: Giovanni Trematerra <giovanni dot trematerra at
gmail dot com>
not defined through macros or similar) in order to be later compiled in
the kernel and offer this way the support for modules (and
compatibility among the UP case and SMP case).
Fix this for the newly introduced atomic_cmpset_barr_* cases by defining
and specifying a template. Note that the new DEFINE_CMPSET_GEN()
template save more typing on amd64 than the current code. [1]
- Fix the style for memory barriers on amd64.
[1] Reported by: Paul B. Mahol <onemda at gmail dot com>
memory barriers should also ensure that the compiler doesn't reorder paths
where they are used. GCC, however, does that aggressively, even in
presence of volatile operands. The most reliable way GCC offers for avoid
instructions reordering is clobbering "memory" even if that is
theoretically an heavy-weight operation, flushing the content of all
the registers and forcing reload of them (We could rely, however, on
gcc DTRT by just understanding the purpose as this is a well-known
pattern for many modern operating-systems).
Not all our memory barriers, right now, clobber memory for GCC-like
compilers. The most notable cases are IA32 and amd64 where the memory
barrier are treacted the same as normal atomic instructions.
Fix this by offering the possibility to implement atomic instructions
with memory barriers separately from the normal version and implement
the GCC-like specific one using memory clobbering.
Thanks to Chris Lattner (@apple) for his discussion on llvm specifics.
Reported by: jhb
Reviewed by: jhb
Tested by: rdivacky, Giovanni Trematerra
<giovanni dot trematerra at gmail dot com>
first and the native ia32 compat as middle (before other things).
o(ld)brandinfo as well as third party like linux, kfreebsd, etc.
stays on SI_ORDER_ANY coming last.
The reason for this is only to make sure that even in case we would
overflow the MAX_BRANDS sized array, the native FreeBSD brandinfo
would still be there and the system would be operational.
Reviewed by: kib
MFC after: 1 month
pmap_invalidate_cache_range() when self-snoop is apparently not reported
in cpu features. We get a reserved trap when clflushing APIC registers
window.
XEN in full system virtualization mode removes self-snoop from CPU
features, making this a problem.
Tested by: csjp
Reviewed by: alc
MFC after: 3 days
devices that we also support, just not by default (thus only LINT or
module builds by default).
While currently there is only "/dev/full" [2], we are planning to see more
in the future. We may decide to change the module/dependency logic in the
future should the list grow too long.
This is not part of linux.ko as also non-linux binaries like kFreeBSD
userland or ports can make use of this as well.
Suggested by: rwatson [1] (name)
Submitted by: ed [2]
Discussed with: markm, ed, rwatson, kib (weeks ago)
Reviewed by: rwatson, brueffer (prev. version)
PR: kern/68961
MFC after: 6 weeks
o introduce PCIE_REGMAX and use it instead of ad-hoc constant
o where 'reg' parameter/variable is not already unsigned, cast it to
unsigned before comparison with maximum value to cut off negative
values
o use PCI_SLOTMAX in several places where 31 or 32 were explicitly used
o drop redundant check of 'bytes' in i386 pciereg_cfgread() - valid
values are already checked in the subsequent switch
Reviewed by: jhb
MFC after: 1 week
startup and genericize it so it can be reused to map other tables as well:
- Add a routine to walk a list of ACPI subtables such as those used in the
APIC and SRAT tables in the MI acpi(4) driver.
- Move the routines for mapping and unmapping an ACPI table as well as
mapping the RSDT or XSDT and searching for a table with a given signature
out into acpica_machdep.c for both amd64 and i386.
amd64 similar to i386. This fixes a bug on amd64 where overlapping
entries would not cause the SMAP parsing to stop.
- Change the SMAP parsing code to do a sorted insertion into physmap[]
instead of an append to support systems with out-of-order SMAP entries.
PR: amd64/138220
Reported by: James R. Van Artsdalen james of jrv org
MFC after: 3 days
then trapsignal is called with ksi.ksi_signo = 0. For debugging kernels,
that should end up in panic, for non-debugging kernels behaviour is
undefined.
Do panic regardeless of execution mode at the moment of trap.
Reviewed by: jhb
MFC after: 1 month
- Add vesa kernel options for amd64.
- Connect libvgl library and splash kernel modules to amd64 build.
- Connect manual page dpms(4) to amd64 build.
- Remove old vesa/dpms files.
Submitted by: paradox <ddkprog yahoo com> [1], swell k at gmail.com
(with some minor tweaks)
The macros for PCPU can be slightly simplified, which makes the
resulting tangle qa lot easier to understand when trying to read them.
MFC after: 4 weeks
based Intel Macs. Since r189055, these platforms started freezing when
ACPI is being initialized for unknown reason. For these platforms, we just
use the old PAT layout. Note this change is not enough to boot fully on
these platforms because of other problems but it makes debugging possible.
Note MacBook5,2 may be affected as well but it was not added here because
of lack of hardware to test.
- Initialize PAT MSR fully instead of reading and modifying it for safety.
Reported by: rpaulo, hps, Eygene Ryabinkin (rea-fbsd at codelabs dot ru)
Reviewed by: jhb
when removing an interrupt handler from an IRQ during shutdown. During
shutdown we are already bound to CPU 0 and this was triggering a panic.
MFC after: 3 days
