It is very conservative. Only spinning when LK_ADAPTIVE is passed, only on
exclusive lock and never when any waiters are present. buffer cache is remains
not spinning.
This reduces total sleep times during buildworld etc., but it does not shorten
total real time (culprits are contention in the vm subsystem along with slock +
upgrade which is not covered).
For microbenchmarks: open3_processes -t 52 (open/close of the same file for
writing) ops/s:
before: 258845
after: 801638
Reviewed by: kib
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D25753
lbh is included for consistency with other functions and in case
future work needs to use it, but it is currently unused. Mark it,
and a post-OpenZFS-import world will be able to raise WARNS of
libbe to the default (pending some minor changes to openzfs libzfs).
MFC after: 3 days
During device attachment, all interrupt sources will bind to the BSP,
as it is the only processor online. This means interrupts must be
redistributed ("shuffled") later, during SI_SUB_SMP.
For the EARLY_AP_STARTUP case, this is no longer true. SI_SUB_SMP will
execute much earlier, meaning APs will be online and available before
devices begin attachment, and there will therefore be nothing to
shuffle.
All PIC-conforming interrupt controllers will handle this early
distribution properly, except for RISC-V's PLIC. Make the necessary
tweak to the PLIC driver.
While here, convert irq_assign_cpu from a boolean_t to a bool.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D25693
Remove all variations of rtrequest <rtrequest1_fib, rtrequest_fib,
in6_rtrequest, rtrequest_fib> and their uses and switch to
to rib_action(). This is part of the new routing KPI.
Submitted by: Neel Chauhan <neel AT neelc DOT org>
Differential Revision: https://reviews.freebsd.org/D25546
10.0.1 final (aka llvmorg-10.0.1-0-gef32c611aa2).
There were no changes since rc2, except in the upstream regression
tests, which we do not ship.
Relnotes: yes
MFC after: immediately (no material changes except tag)
In cubic, the concave region is when snd_cwnd starts growing slower
towards max_cwnd (cwnd at the time of the congestion event), and
the convex region is when snd_cwnd starts to grow faster and
eventually appearing like slow-start like growth.
PR: 238478
Reviewed by: tuexen (mentor), rgrimes (mentor)
Approved by: tuexen (mentor), rgrimes (mentor)
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D24657
Fix some style issues as well. Leave -Wno-cast-aligned set for now, as
most of the warnings come casts of CMSG_DATA(), which does provide
sufficient alignment in practice.
Submitted by: Shubh Gupta <shubh@freebsd.org>
Sponsored by: Google (GSOC 2020)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25603
arg0 should be an offset of the return point within the function, arg1
should be the return value. Previously the return probe had arguments as
if for the entry probe.
Tested on armv7.
andrew noted that the same problem seems to be present on arm64, mips,
and riscv.
I am not sure if I will get around to fixing those. So, platform users
or anyone looking to make a contribution please be aware of this
opportunity.
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25685
I2C communication is done by a combination of driving a line low or
letting it float, so that it is either pulled up or driven low by
another party.
r355276 besides the stated goal of the change -- using the new GPIO API
-- also changed the logic, so that active state is signaled by actively
driving a line.
That worked with iicbb prior to r362042, but stopped working after that
commit on at least some hardware. My guess that the breakage was
related to getting an ACK bit. A device expected to be able to drive
SDA actively low, but controller was actively driving it high for some
time.
Anyway, this change seems to fix the problem.
Tested using gpioiic on Orange Pi PC Plus with HTU21 sensor.
Reported by: Nick Kostirya <nikolay.kostirya@i11.co>
Reviewed by: manu
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25684
- Handle whitespace with long flags that take arguments:
echo 'foo bar' > test
zgrep --regexp='foo bar' test
- Do not hang reading from stdin with patterns in a file:
echo foobar > test
echo foo > pattern
zgrep -f pattern test
zgrep --file=pattern test
- Handle any flags after -e:
echo foobar > test
zgrep -e foo --ignore-case < test
These two are still outstanding problems:
- Does not handle flags that take an argument if there is no
whitespace:
zgrep -enfs /etc/rpc
- When more than one -e pattern used matching should occur for all
patterns (similar to multiple patterns supplied with -f file).
Instead only the last pattern is used for matching:
zgrep -e rex -e nfs /etc/rpc
(This problem is masked in the unpatched version by the "any
flags after -e" problem.)
Add tests for the above problems.
Update the mange and add references to gzip(1) and zstd(1) and also
document the remaining known problems.
PR: 247126
Approved by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25613
Without versioning information, using preexisting loader /
linker code is not easily possible when another module may
have dependencies on pre-loaded modules, and also doesn't
allow the automatic loading of dependent modules.
No functional change of the actual modules.
Reviewed by: tuexen (mentor), rgrimes (mentor)
Approved by: tuexen (mentor), rgrimes (mentor)
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D25744
Allocate iovec arrays and struct cryptop and struct ocf_operation
objects on the stack to reduce avoid the overhead of malloc().
These structures are all small enough to fit on the stack of the KTLS
worker threads.
Reviewed by: gallatin
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D25692
In case the network device has a RX or TX control queue, the correct
number of TX/RX descriptors is contained in the second entry of the
isc_ntxd (or isc_nrxd) array, rather than in the first entry.
This case is correctly handled by iflib_device_register() and
iflib_pseudo_register(), but not by iflib_netmap_attach().
If the first entry is larger than the second, this can result in a
panic. This change fixes the bug by introducing two helper functions
that also lead to some code simplification.
PR: 247647
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D25541
gnu_debuglink external debug files will contain an .eh_frame section of
type SHT_NOBITS. libdwarf does not handle such sections (or rather, it
expects all debug sections to not have type SHT_NOBITS). Avoid loading
SHT_NOBITS sections, to be consistent with SGI libdwarf's handling of
this case.
PR: 239516
Diagnosed by: Paco Pascal <me@pacopascal.com>
Reviewed by: emaste (previous version)
Event: July 2020 Bugathon
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25626
This should be triggered only if arc_read() fails, i.e., quite rarely.
The same logic is already present in OpenZFS.
PR: 247445
Submitted by: jdolecek@NetBSD.org
MFC after: 1 week
The FDT may contain a short /chosen/bootargs string which we should pass
to boot_parse_cmdline. Notably, this allows the use of qemu's -append
option to pass things like -s to boot to single user mode.
Submitted by: Nathaniel Filardo <nwf20@cl.cam.ac.uk>
Reviewed by: mhorne
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25544
MK_EFI was added to kern.opts.mk in r331099, but is currently unused.
Take advantage of that fact and gate the build of efirt behind it.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24673
Limit manipulations to use %rax as scratch to the pti portion of the
syscall entry code.
Submitted by: alc
Reviewed by: markj
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25722
Split the MANAGE privilege into MANAGE, SETMAC and CREATE_VAP.
+ VAP_MANAGE is everything but setting the MAC and creating a VAP.
+ VAP_SETMAC is setting the MAC address of the VAP.
Typically you wouldn't want the jail to be able to modify this.
+ CREATE_VAP is to create a new VAP. Again, you don't want to be doing
this in a jail, but this DOES stop being able to run some corner
cases like Dynamic WDS (DWDS) AP in a jail/vnet. We can figure this
bit out later.
This allows me to run wpa_supplicant in a jail after transferring
a STA VAP into it. I unfortunately can't currently set the wlan
debugging inside the jail; that would be super useful!
Reviewed by: bz
Differential Revision: https://reviews.freebsd.org/D25630
This avoids a use-after-free reported for the userland stack.
Thanks to Taylor Brandstetter for suggesting a patch for
the userland stack.
MFC after: 1 week
