libusb_hotplug_deregister_callback() for the LibUSB v1.0 API and
update the libusb(3) manual page.
Approved by: re (kib)
Requested by: swills
MFC after: 1 week
version of the XHCI specification. Make sure the code can handle the
maximum number of allowed scratch pages.
Submitted by: Shichun_Ma@Dell.com
Approved by: re (hrs)
MFC after: 1 week
Update libarchive to 3.2.1 (bugfix and security fix release)
List of vendor fixes:
- fix exploitable heap overflow vulnerability in Rar decompression
(vendor issue 719, CVE-2016-4302, TALOS-2016-0154)
- fix exploitable stack based buffer overflow vulnebarility in mtree
parse_device functionality (vendor PR 715, CVE-2016-4301, TALOS-2016-0153)
- fix exploitable heap overflow vulnerability in 7-zip read_SubStreamsInfo
(vendor issue 718, CVE-2016-4300, TALOS-2016-152)
- fix integer overflow when computing location of volume descriptor
(vendor issue 717)
- fix buffer overflow when reading a crafred rar archive (vendor issue 521)
- fix possible buffer overflow when reading ISO9660 archives on machines
where sizeof(int) < sizeof(size_t) (vendor issue 711)
- tar and cpio should fail if an input file named on the command line is
missing (vendor issue 708)
- fix incorrect writing of gnutar filenames that are exactly 512 bytes
long (vendor issue 682)
- allow tests to be run from paths that are equal or longer than 128
characters (vendor issue 657)
- add memory allocation errors in archive_entry_xattr.c (vendor PR 603)
- remove dead code in archive_entry_xattr_add_entry() (vendor PR 716)
- fix broken decryption of ZIP files (vendor issue 553)
- manpage style, typo and description fixes
Post-3.2.1 vendor fixes:
- fix typo in cpio version reporting (Vendor PR 725, 726)
- fix argument range of ctype functions in libarchive_fe/passphrase.c
- fix ctype use and avoid empty loop bodies in WARC reader
MFC after: 1 week
Security: CVE-2016-4300, CVE-2016-4301, CVE-2016-4302
Approved by: re (kib)
File and disk-backed I/O requests store counts of read/written disk
blocks in each AIO job so that they can be charged to the thread that
completes an AIO request via aio_return() or aio_waitcomplete(). This
change extends AIO jobs to store counts of received/sent messages and
updates socket backends to set these counts accordingly. Note that
the socket backends are careful to only charge a single messages for
each AIO request even though a single request on a blocking socket might
invoke sosend or soreceive multiple times. This is to mimic the
resource accounting of synchronous read/write.
Adjust the UNIX socketpair AIO test to verify that the message resource
usage counts update accordingly for aio_read and aio_write.
Approved by: re (hrs)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D6911
The DPADD data in .depend will be redundant with what is in the .meta file.
Also extend NO_EXTRADEPEND support to bsd.prog.mk.
Approved by: re (blanket, META_MODE)
Sponsored by: EMC / Isilon Storage Division
device is gone.
The problem was that when disk_gone() is called, if the GEOM disk
creation process has not yet happened, the withering process
couldn't start.
We didn't record any state in the GEOM disk code, and so the d_gone()
callback to the da(4) driver never happened.
The solution is to track the state of the creation process, and
initiate the withering process from g_disk_create() if the disk is
being created.
This change does add fields to struct disk, and so I have bumped
DISK_VERSION.
geom_disk.c: Track where we are in the disk creation process,
and check to see whether our underlying disk has
gone away or not.
In disk_gone(), set a new d_goneflag variable that
g_disk_create() can check to see if it needs to
clean up the disk instance.
geom_disk.h: Add a mutex to struct disk (for internal use) disk
init level, and a gone flag.
Bump DISK_VERSION because the size of struct disk has
changed and fields have been added at the beginning.
Sponsored by: Spectra Logic
Approved by: re (marius)
fully-pessimized implementation that requires a type to be aligned to
its natural size.
On armv6+ the compiler might generate load-/store-multiple instructions
which require 4-byte alignment even though the source code is only
accessing individual uint32_t values in a way that doesn't require any
particular alignment at all. The compiler apparently feels free to
combine multiple accesses into a single instruction that requires a
more-strict alignment, and no set of compiler flags seems to disable
this behavior (at least in clang 3.8).
This fixes alignment faults on arm systems using wifi adapters. The
wifi code uses ALIGNED_POINTER(p, uint32_t) to decide whether it needs
to copy-align tcp headers. Because clang is combining several uint32_t
accesses into a single ldm instruction, we need to say that accessing a
uint32_t requires 4-byte alignment.
Approved by: re(gjb)
statistics. Marking is done by setting the OBJ_ACTIVE flag. The
flags change is locked, but the problem is that many parts of system
assume that vm object initialization ensures that no other code could
change the object, and thus performed lockless. The end result is
corrupted flags in vm objects, most visible is spurious OBJ_DEAD flag,
causing random hangs.
Avoid the active object marking, instead provide equally inexact but
immutable is_object_alive() definition for the object mapped state.
Avoid iterating over the processes mappings altogether by using
arguably improved definition of the paging thread as one which sleeps
on the v_free_count.
PR: 204764
Diagnosed by: pho
Tested by: pho (previous version)
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (gjb)
It turns out that getting decent performance requires stacking the TX
FIFO a little more aggressively.
* Ensure that when we complete a frame, we attempt to push a new frame
into the FIFO so TX is kept as active as it needs to be
* Be more aggressive about batching non-aggregate frames into a single
TX FIFO slot. This "fixes" TDMA performance (since we only get one
TX FIFO slot ungated per DMA beacon alert) but it does this by pushing
a whole lot of work into the TX FIFO slot.
I'm not /entirely/ pleased by this solution, but it does fix a whole bunch
of corner case issues in the transmit side and fix TDMA whilst I'm at it.
I'll go revisit transmit packet scheduling in ath(4) post 11.
Tested:
* AR9380, STA mode
* AR9580, hostap mode
* AR9380, TDMA client mode
Approved by: re (hrs)
rS274085 made vt(4) the default system console. Catch up to this in
the man page description for the kern.vty tunable.
Reviewed by: bz
Approved by: re (hrs)
Differential Revision: https://reviews.freebsd.org/D6901
than removing the network interfaces first. This change is rather larger
and convoluted as the ordering requirements cannot be separated.
Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and
related modules to their own SI_SUB_PROTO_FIREWALL.
Move initialization of "physical" interfaces to SI_SUB_DRIVERS,
move virtual (cloned) interfaces to SI_SUB_PSEUDO.
Move Multicast to SI_SUB_PROTO_MC.
Re-work parts of multicast initialisation and teardown, not taking the
huge amount of memory into account if used as a module yet.
For interface teardown we try to do as many of them as we can on
SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling
over a higher layer protocol such as IP. In that case the interface
has to go along (or before) the higher layer protocol is shutdown.
Kernel hhooks need to go last on teardown as they may be used at various
higher layers and we cannot remove them before we cleaned up the higher
layers.
For interface teardown there are multiple paths:
(a) a cloned interface is destroyed (inside a VIMAGE or in the base system),
(b) any interface is moved from a virtual network stack to a different
network stack ("vmove"), or (c) a virtual network stack is being shut down.
All code paths go through if_detach_internal() where we, depending on the
vmove flag or the vnet state, make a decision on how much to shut down;
in case we are destroying a VNET the individual protocol layers will
cleanup their own parts thus we cannot do so again for each interface as
we end up with, e.g., double-frees, destroying locks twice or acquiring
already destroyed locks.
When calling into protocol cleanups we equally have to tell them
whether they need to detach upper layer protocols ("ulp") or not
(e.g., in6_ifdetach()).
Provide or enahnce helper functions to do proper cleanup at a protocol
rather than at an interface level.
Approved by: re (hrs)
Obtained from: projects/vnet
Reviewed by: gnn, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6747
tests/sys/acl/Makefile
add perl to the required_programs for all tests in this directory
Reviewed by: ngie
Approved by: re (gjb)
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6870
1) Unload mbuf instead of descriptor in rtwn_tx_done().
2) Add more synchronization for device visible mappings before
touching the memory.
3) Improve watchdog timer logic.
Reported and tested by: mva
Approved by: re (gjb)
Remove frames from active/pending Tx queues and free related node
references when vap is destroyed to prevent various use-after-free
scenarios.
Reported and tested by: Aleksander Alekseev <afiskon@devzen.ru>
PR: 208632
Approved by: re (gjb)
Use MPI2_IOCSTATUS_MASK when checking IOCStatus to mask off the log bit, and
make a few more things endian-safe.
- Fix possible use of invalid pointer.
It was possible to use an invalid pointer to get the target ID value. To fix
this, initialize a local Target ID variable to an invalid value and change that
variable to a valid value only if the pointer to the Target ID is not NULL.
- No need to set the MPSSAS_SHUTDOWN flag because it's never used.
- done_ccb pointer can be used if it is NULL.
To prevent this, move check for done_ccb == NULL to before done_ccb is used in
mpssas_stop_unit_done().
- Disks can go missing until a reboot is done in some cases.
This is due to the DevHandle not being released, which causes the Firmware to
not allow that disk to be re-added.
Reviewed by: ken
Approved by: re (gjb), ken, scottl, ambrisko (mentors)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6872
Among other things, this introduces the idea of DBA-gated queues that
aren't the CABQ. The TDMA support requires this.
Tested:
* AR9580 (hostap mode)
* AR9380 (sta mode)
Approved by: re (gjb)
Serbian locales have triple components to represent the 2 variations of the
locale: Latin and Cyrillic. Previously the tools generatic the locale were
appending both definitions instead of differentiating them.
Reported by: ache
Approved by: re (gjb)
This started showing up when doing lots of aggregate traffic. For TDMA it's
always no-ACK traffic and I didn't notice this, and I didn't notice it
when doing 11abg traffic as it didn't fail enough in a bad way to trigger
this.
This showed up as the fifo depth being < 0.
Eg:
Jun 19 09:23:07 gertrude kernel: ath0: ath_tx_edma_push_staging_list: queued 2 packets; depth=2, fifo depth=1
Jun 19 09:23:07 gertrude kernel: ath0: ath_edma_tx_processq: Q1, bf=0xfffffe000385f068, start=1, end=1
Jun 19 09:23:07 gertrude kernel: ath0: ath_edma_tx_processq: Q1: FIFO depth is now 0 (1)
Jun 19 09:23:07 gertrude kernel: ath0: ath_edma_tx_processq: Q1, bf=0xfffffe0003866fe8, start=0, end=1
Jun 19 09:23:07 gertrude kernel: ath0: ath_edma_tx_processq: Q1: FIFO depth is now -1 (0)
So, clear the flags before adding them to a TX queue, so if they're
re-added for the retransmit path it'll clear whatever they were and
not double-account the FIFOEND flag. Oops.
Tested:
* AR9380, STA mode, 11n iperf testing (~130mbit)
Approved by: re (delphij)
explains the plausible scenario), resulting in EDEADLK returned on the
local registration attempt. Handle this by re-trying the local op [1].
On unmount, local registration abort is indicated as EINTR, abort the nlm
call as well.
Reported and tested by: pho
Suggested and reviewed by: dfr (previous version, [1])
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (delphij)
Drop scan generation number and node table scan lock - the only place
where ni_scangen is checked is in ieee80211_timeout_stations() (and it
is used to prevent duplicate checking of the same node); node scan lock
protects only this variable + node table scan generation number.
This will fix (at least) next LOR (hostap mode):
lock order reversal:
1st 0xc175f84c urtwm0_scan_loc (urtwm0_scan_loc) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2019
2nd 0xc175e018 urtwm0_com_lock (urtwm0_com_lock) @ /usr/src/sys/modules/wlan/../../net80211/ieee80211_node.c:2693
stack backtrace:
#0 0xa070d1c5 at witness_debugger+0x75
#1 0xa070d0f6 at witness_checkorder+0xd46
#2 0xa0694cce at __mtx_lock_flags+0x9e
#3 0xb03ad9ef at ieee80211_node_leave+0x12f
#4 0xb03afd13 at ieee80211_timeout_stations+0x483
#5 0xb03aa1c2 at ieee80211_node_timeout+0x42
#6 0xa06c6fa1 at softclock_call_cc+0x1e1
#7 0xa06c7518 at softclock+0xc8
#8 0xa06789ae at intr_event_execute_handlers+0x8e
#9 0xa0678fa0 at ithread_loop+0x90
#10 0xa0675fbe at fork_exit+0x7e
#11 0xa08af910 at fork_trampoline+0x8
In addition to the above:
* switch to ieee80211_iterate_nodes();
* do not assert that node table lock is held, while calling node_age();
that's not really needed (there are no resources, which can be protected
by this lock) + this fixes LOR/deadlock between ieee80211_timeout_stations()
and ieee80211_set_tim() (easy to reproduce in HOSTAP mode while
sending something to an STA with enabled power management).
Tested:
* (avos) urtwn0, hostap mode
* (adrian) AR9380, STA mode
* (adrian) AR9380, AR9331, AR9580, hostap mode
Notes:
* This changes the net80211 internals, so you have to recompile all of it
and the wifi drivers.
Submitted by: avos
Approved by: re (delphij)
Differential Revision: https://reviews.freebsd.org/D6833
It turns out the frame scheduling policies (eg DBA_GATED) operate on
a single TX FIFO entry. ASAP scheduling is fine; those frames always
go out.
DBA-gated sets the TX queue ready when the DBA timer fires, which triggers
a beacon transmit. Normally this is used for content-after-beacon queue
(CABQ) work, which needs to burst out immediately after a beacon.
(eg broadcast, multicast, etc frames.) This is a general policy that you
can use for any queue, and Sam's TDMA code uses it.
When DBA_GATED is used and something like say, an 11e TX burst window,
it only operates on a single TX FIFO entry. If you have a single frame
per TX FIFO entry and say, a 2.5ms long burst window (eg TDMA!) then it'll
only burst a single frame every 2.5ms. If there's no gating (eg ASAP) then
the burst window is fine, and multiple TX FIFO slots get used.
The CABQ code does pack in a list of frames (ie, the whole cabq) but
up until this commit, the normal TX queues didn't. It showed up when
I started to debug TDMA on the AR9380 and later.
This commit doesn't fix the TDMA case - that's still broken here, because
all I'm doing here is allowing 'some' frames to be bursting, but I'm
certainly not filling the whole TX FIFO slot entry with frames.
Doing that 'properly' kind of requires me to take into account how long
packets should take to transmit and say, doing 1.5 or something times that
per TX FIFO slot, as if you partially transmit a slot, when it's next
gated it'll just finish that TX FIFO slot, then not advance to the next
one.
Now, I /also/ think queuing a new packet restarts DMA, but you have to
push new frames into the TX FIFO. I need to experiment some more with
this because if it's really the case, I will be able to do TDMA support
without the egregious hacks I have in my local tree. Sam's TDMA code
for previous chips would just kick the TXE bit to push along DMA
again, but we can't do that for EDMA chips - we /have/ to push a new
frame into the TX FIFO to restart DMA. Ugh.
Tested:
* AR9380, STA mode
* AR9380, hostap mode
* AR9580, hostap mode
Approved by: re (gjb)
This allows IPv6 link local addresses (and other IPv6 functionality) to work.
PR: 210355
Submitted by: Steve Wahl and David Bright (both at Dell Inc.)
Reviewed by: cem, mav
Tested by: mav (on Intel hardware)
Approved by: re (kib)
MFC after: 5 days
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D6885
dropping the reference on mnt_cred. Prevent this by referencing the
temporal credentials before unlock.
Tested by: pho
Reviewed by: dfr
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (gjb)
Fixed vendor issues:
Issue 553: Fix broken decryption for ZIP files
Issue 657: Allow up to 8k for the test root directory name
Issue 682: Correctly write gnutar filenames of exactly 512 bytes
Issue 708: tar should fail if a named input file is missing
PR 715: Fix libarchive/archive_read_support_format_mtree.c:1388:11:
error: array subscript is above array bounds
mkimg has had a number of functional additions after the last time the
version was incremented. Do so now, to r292082's commit date, so that
users can determine what is supported.
Reviewed by: marcel
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6882
Adopt the OpenBSD syntax for setting and filtering on VLAN PCP values. This
introduces two new keywords: 'set prio' to set the PCP value, and 'prio' to
filter on it.
Reviewed by: allanjude, araujo
Approved by: re (gjb)
Obtained from: OpenBSD (mostly)
Differential Revision: https://reviews.freebsd.org/D6786
This apparently puts ARC back under the limits after the vnode pressure
rework in r291244, in particular due to the kmem exhaustion.
Based on patch by: mckusick
Reviewed by: avg, mckusick
Tested by: allanjude, madpilot
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
to mount points with the given filesystem type, specified by mount
vfs_ops pointer.
Based on patch by: mckusick
Reviewed by: avg, mckusick
Tested by: allanjude, madpilot
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
reported by EFI implementation. This address comment on r301714.
Approved by: re (gjb), andrew (mentor)
Differential Revision: https://reviews.freebsd.org/D6787
ar output is already deterministic by default for ar -q and ar -r, and
when invoked as ranlib. Make ar -s equivalent to ranlib and enable
deterministic output by default in that case too.
PR: 210330
Reviewed by: bdrewery
Approved by: re (gjb)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6871
Maps Sonics/OCP per-core address spaces to bcma(4)-compatible port/region
identifiers.
This permits the use of common address map identifiers in bhnd device
drivers, independent of the underlying interconnect type.
Approved by: re (gjb), adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6850
- Delete all chipc children on attachment failure.
- Added missing bhnd_nexus bhnd_bus_deactivate_resource implementation.
- Drop a CHIPC_UNLOCK() accidentally left behind after lifting
synchronization into the chipc region refcounting API.
- Fix re-allocation of chipc resources. Previously, the resource ID was
reset to -1 on release, preventing later re-allocation.
Approved by: re (gjb), adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6849
