While here, fix all links to older en_US.ISO8859-1 documentation
in the src/ tree.
PR: 255026
Reported by: Michael Büker <freebsd@michael-bueker.de>
Reviewed by: dbaio
Approved by: blackend (mentor), re (gjb)
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D30265
During early qemu development, the /soc node was marked as compatible
with "riscv-virtio-soc" instead of "simple-bus".
This was changed in qemu 53f54508dae6 in Sep 2018, and predates the
baseline required qemu version (5.0) for riscv by a wide margin.
The generic simplebus code handles attachment in all cases nowadays.
Sponsored by: Tag1 Consulting, Inc.
Reviewed by: jrtc27, mhorne
Differential Revision: https://reviews.freebsd.org/D30011
Previously, a page fault taken during copyin/out and related functions
would run the entire fault handler while permitting direct access to
user addresses. This could also leak across context switches (e.g. if
the page fault handler was preempted by an interrupt or slept for disk
I/O).
To fix, clear SUM in assembly after saving the original version of
SSTATUS in the supervisor mode trapframe.
Reviewed by: mhorne, jrtc27
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D29763
Use the new kdb variants. Print more specific error messages.
Reviewed by: jhb, markj
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29156
This basically mirrors what already exists in ddb, but provides a
slightly improved interface. It allows the caller to specify the
watchpoint access type, and returns more specific error codes to
differentiate failure cases.
This will be used to support hardware watchpoints in gdb(4).
Stubs are provided for architectures lacking hardware watchpoint logic
(mips, powerpc, riscv), while other architectures are added individually
in follow-up commits.
Reviewed by: jhb, kib, markj
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29155
This change serves two purposes.
First, we take advantage of the compiler provided endian definitions to
eliminate some long-standing duplication between the different versions
of this header. __BYTE_ORDER__ has been defined since GCC 4.6, so there
is no need to rely on platform defaults or e.g. __MIPSEB__ to determine
endianness. A new common sub-header is added, but there should be no
changes to the visibility of these definitions.
Second, this eliminates the hand-rolled __bswapNN() routines, again in
favor of the compiler builtins. This was done already for x86 in
e6ff6154d2. The benefit here is that we no longer have to maintain our
own implementations on each arch, and can instead rely on the compiler
to emit appropriate instructions or libcalls, as available. This should
result in equivalent or better code generation. Notably 32-bit arm will
start using the `rev` instruction for these routines, which is available
on armv6+.
PR: 236920
Reviewed by: arichardson, imp
Tested by: bdragon (BE powerpc)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D29012
e4b8deb222 removed the last in-tree uses of PCPU_INC(). Its
potential benefit is also practically nonexistent. Non-x86
platforms already implement it as PCPU_ADD(..., 1), and according
to [0] there are no recent x86 processors for which the 'inc'
instruction provides a performance benefit over the equivalent
memory-operand form of the 'add' instruction. The only remaining
benefit of 'inc' is smaller instruction size, which in this case
is inconsequential given the limited number of per-CPU data consumers.
[0]: https://www.agner.org/optimize/instruction_tables.pdf
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D29308
This appears to be a copy-and-paste error that has simply been
overlooked. The tree contains only two calls to any of the affected
variants, but recent additions to the test suite started exercising the
call to atomic_clear_rel_int() in ng_leave_write(), reliably causing
panics.
Apparently, the issue was inherited from the arm64 atomic header. That
instance was addressed in c90baf6817, but the fix did not make its way
to RISC-V.
Note that the particular test case ng_macfilter_test:main still appears
to fail on this platform, but this change reduces the panic to a
timeout.
PR: 253237
Reported by: Jenkins, arichardson
Reviewed by: kp, arichardson
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29064
This macro returns true if a provided virtual address is contained
in the kernel's clean submap.
In CHERI kernels, the buffer cache and transient I/O map are allocated
as separate regions. Abstracting this check reduces the diff relative
to FreeBSD. It is perhaps slightly more readable as well.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D28710
The System Reset extension provides functions to shutdown or reboot the
system via SBI firmware. This newly defined extension supersedes the
functionality of the legacy shutdown extension.
Update the SBI code to use the new System Reset extension when
available, and fall back to the legacy one.
Reviewed By: kp, jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D28226
This setting limits the amount of memory that can be allocated to UMA.
On systems with a direct map and ample KVA, however, there is no reason
for VM_KMEM_SIZE_SCALE to be larger than 1. This appears to have been
inherited from the 32-bit ARM platform definitions.
Also remove VM_KMEM_SIZE_MIN, which is not needed when
VM_KMEM_SIZE_SCALE is defined to be 1.[*]
Reviewed by: alc, kp, kib
Reported by: alc [*]
Submitted by: Klara, Inc.
Sponsored by: Ampere Computing
Differential Revision: https://reviews.freebsd.org/D28225
This is the superset of the nooptions found in the -DEBUG kernels.
Reviewed by: emaste, manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28152
The purpose of this KASSERT is to ensure that we do not run out of space
in the early devmap. However, the devmap grew beyond its initial size of
2MB in r336519, and this assertion did not grow with it.
A devmap mapping of a 1080p framebuffer requires 1920x1080 bytes, or
1.977 MB, so it is just barely able to fit without triggering the
assertion, provided no other devices are mapped before it. With the
addition of `options GDB` in GENERIC by bbfa199cbc, the uart is now
mapped for the purposes of a debug port, before mapping the framebuffer.
The presence of both these conditions pushes the selected virtual
address just below the threshold, triggering the assertion.
To fix this, use the correct size of the devmap, defined by
PMAP_MAPDEV_EARLY_SIZE. Since this code is shared with RISC-V, define
it for that platform as well (although it is a different size).
PR: 25241
Reported by: gbe
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Ensure that we don't end up with a superpage in the vm_page_t's pv list.
This may help with debugging the panic reported in PR 250866, in which
l3 in pmap_remove_write() was found to be NULL. Adding a KASSERT to this
function will help narrow down the cause of this panic the next time it
occurs.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D28109
Add 64-bit address support to Cadence CGEM Ethernet driver for use in
other SoCs such as the Zynq UltraScale+ and SiFive HighFive Unleashed.
Reviewed by: philip, 0mp (manpages)
Differential Revision: https://reviews.freebsd.org/D24304
Add an additional set of braces to clarify intention. The '&' operator
has a higher precedence than '|', but the reader may not always remember
this. No functional change.
This sysctl node can generate very verbose output, so don't trigger it
for sysctl -a or sysctl vm.pmap.
Reviewed by: markj, kib
Differential Revision: https://reviews.freebsd.org/D27504
These implementation IDs are defined in the SBI spec, so we should print
their name if detected.
Submitted by: Danjel Qyteza <danq1222@gmail.com>
Reviewed by: jhb, kp
Differential Revision: https://reviews.freebsd.org/D27660
Ability to load-balance traffic over multiple path is a must-have thing for routers.
It may be used by the servers to balance outgoing traffic over multiple default gateways.
The previous implementation, RADIX_MPATH stayed in the shadow for too long.
It was not well maintained, which lead us to a vicious circle - people were using
non-contiguous mask or firewalls to achieve similar goals. As a result, some routing
daemons implementation still don't have multipath support enabled for FreeBSD.
Turning on ROUTE_MPATH by default would fix it. It will allow to reduce networking
feature gap to other operating systems. Linux and OpenBSD enabled similar support
at least 5 years ago.
ROUTE_MPATH does not consume memory unless actually used. It enables around ~1k LOC.
It does not bring any behaviour changes for userland.
Additionally, feature is (temporarily) turned off by the net.route.multipath sysctl
defaulting to 0.
Differential Revision: https://reviews.freebsd.org/D27428
Prefer atomics to critical section. This reduces the cost of the
increment operation and removes the possibility of it being interrupted
by counter_u64_zero().
Use CPU_FOREACH() macro to skip absent CPUs.
Replace hand-rolled address calculation with zpcpu_get().
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D27536
Allows recovery or diagnosis of a fatal page fault before panicking the
system.
Reviewed by: jhb, kp
Differential Revision: https://reviews.freebsd.org/D27534
- Push the kstack_contains check down into unwind_frame() so that it
is honored by DDB and DTrace.
- Check that the trapframe for an exception frame is contained in the
traced thread's kernel stack for DDB traces.
Reviewed by: markj
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27357
This is useful for stack unwinders which need to avoid out-of-bounds
reads of a kernel stack which can trigger kernel faults.
Reviewed by: kib, markj
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27356
This allows GDB to print more useful backtraces when setting a breakpoint
on an assembly function.
Reviewed By: jhb
Differential Revision: https://reviews.freebsd.org/D27177
Ensure we initialize the static environment when not booting via
loader(8), and provide a static buffer if this is the case. This fixes
two issues.
First, performing the initialization ensures that kenv variables set in
the kernel's config file are honored. Previously, any new or overridden
values were ignored.
Second, providing the static buffer allows variables to be set in the
device tree's bootargs property of the chosen node. This can be set by
u-boot or by QEMU's '-append' flag. Attempting to this prior to this
change resulted in an early panic, since the static environment had no
buffer backing it.
Submitted by: syrinx (earlier version)
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D25034
In pmap_bootstrap(), we fill kernel_pmap->pm_active since it is
invariably active on all harts. However, this marks it as active even
for harts that don't exist in the system, which can cause issue when the
mask is passed to the SBI firmware via sbi_remote_sfence_vma().
Specifically, the SBI spec allows SBI_ERR_INVALID_PARAM to be returned
when an invalid hart is set in the mask.
The latest version of OpenSBI does not have this issue, but v0.6 does,
and this is triggering a recently added KASSERT in CI. Switch to only
setting bits in pm_active for harts that enter the system.
Reported by: Jenkins
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D27080
VM_ALLOC_WAITOK and vm_page_unwire_noq(), have eliminated the need for
many of the #includes.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D27052
- remove setting of register value which is not used until the next value is
set
- Use the L2_SHIFT constant when setting up L2 superpages
Submitted by: Antonin Houska <ah AT melesmeles DOT cz>
Version 0.2 of the SBI specification [1] marked the existing SBI
functions as "legacy" in order to move to a newer calling convention. It
also introduced a set of replacement extensions for some of the legacy
functionality. In particular, the TIME, IPI, and RFENCE extensions
implement and extend the semantics of their legacy counterparts, while
conforming to the newer version of the spec.
Update our SBI code to use the new replacement extensions when
available, and fall back to the legacy ones. These will eventually be
dropped, when support for version 0.2 is ubiquitous.
[1] https://github.com/riscv/riscv-sbi-doc/blob/master/riscv-sbi.adoc
Submitted by: Danjel Q. <danq1222@gmail.com>
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D26953
S-mode software has write access to the SIP.SSIP bit, so instead of
making a second round-trip through the SBI we can clear it ourselves.
The SBI spec has deprecated this function for this exactly this reason.
Submitted by: Danjel Q. <danq1222@gmail.com
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D26952
The existing names were inherited from arm64, but we should prefer
RISC-V terminology. Change the prefix to SCAUSE, and further change the
names to better match the RISC-V spec and be more consistent with one
another. Also, remove two codes that are not defined for S-mode (machine
and hypervisor ecall).
While here, apply style(9) to some condition checks.
Reviewed by: kp
Discussed with: jrtc27
Differential Revision: https://reviews.freebsd.org/D26918
As was done for L3 PTEs in r362853, mask out the reserved bits when
extracting the physical address from an L2 PTE. Future versions of the
spec or custom implementations may make use of these reserved bits, in
which case the resulting physical address could be incorrect.
Submitted by: Nathaniel Filardo <nwf20@cl.cam.ac.uk>
Reviewed by: kp, mhorne
Differential Revision: https://reviews.freebsd.org/D26607
Hiding this feature behind RB_VERBOSE is gratuitous. The tunable is enough
to limit its use to only those who explicitly request it.
Suggested by: kevans
Move dump_avail[] extern declaration and inlines into a new header
vm/vm_dumpset.h. This fixes default gcc build for mips.
Reviewed by: alc, scottph
Tested by: kevans (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26741
Push the root seed version to userspace through the VDSO page, if
the RANDOM_FENESTRASX algorithm is enabled. Otherwise, there is no
functional change. The mechanism can be disabled with
debug.fxrng_vdso_enable=0.
arc4random(3) obtains a pointer to the root seed version published by
the kernel in the shared page at allocation time. Like arc4random(9),
it maintains its own per-process copy of the seed version corresponding
to the root seed version at the time it last rekeyed. On read requests,
the process seed version is compared with the version published in the
shared page; if they do not match, arc4random(3) reseeds from the
kernel before providing generated output.
This change does not implement the FenestrasX concept of PCPU userspace
generators seeded from a per-process base generator. That change is
left for future discussion/work.
Reviewed by: kib (previous version)
Approved by: csprng (me -- only touching FXRNG here)
Differential Revision: https://reviews.freebsd.org/D22839
Create the RISC-V NOTES and LINT files. As of r366559, LINT configs are
no longer generated but checked in to the tree.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D26502
The boot metadata (also referred to as modinfo, or preload metadata)
provides information about the size and location of the kernel,
pre-loaded modules, and other metadata (e.g. the EFI framebuffer) to be
consumed during by the kernel during early boot. It is encoded as a
series of type-length-value entries and is usually constructed by
loader(8) and passed to the kernel. It is also faked on some
architectures when booted by other means.
Although much of the module information is available via kldstat(8),
there is no easy way to debug the metadata in its entirety. Add some
routines to parse this data and allow it to be printed to the console
during early boot or output via a sysctl.
Since the output can be lengthly, printing to the console is gated
behind the debug.dump_modinfo_at_boot kenv variable as well as the
BOOTVERBOSE flag. The sysctl to print the metadata is named
debug.dump_modinfo.
Reviewed by: tsoome
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26687
It is unlikely, but possible, that an unrecognized or unsupported
relocation type is encountered while trying to load a kernel module. If
this occurs we should offer the symbol index as a hint to the user.
While here, fix some small style issues.
Reviewed by: markj, kib (amd64 part, in D26701)
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Since r366355 and r366284 we panic on access faults rather than treating
them like page faults so this condition is never true.
Reviewed by: jhb (mentor), markj, mhorne
Approved by: jhb (mentor), markj, mhorne
Differential Revision: https://reviews.freebsd.org/D26686
We should never take instruction page faults when in the kernel, but by
using the standard page fault code we should get a more-informative
message about faulting on a NOFAULT page rather than branching to the
default case here and printing an "Unknown kernel exception ..."
message.
Reviewed by: jhb (mentor), markj
Approved by: jhb (mentor), markj
Differential Revision: https://reviews.freebsd.org/D26685
These names were inherited from the arm64 port and should be changed to
the RISC-V terminology.
Reviewed by: jhb (mentor), kp, markj
Approved by: jhb (mentor), kp, markj
Differential Revision: https://reviews.freebsd.org/D26671
