This tests fork()s, so if there is still data in the stdout buffer on fork
it will print it again in the child process. This was happening in the
CheriBSD CI and caused the test to complain about malformed TAP output.
Reviewed By: ngie
Differential Revision: https://reviews.freebsd.org/D28397
It's possible when adding a jail that its dying parent comes back to
life. Only allow that to happen when JAIL_DYING is specified. And if
it does happen, call PR_METHOD_CREATE on it.
vfs_cache_lookup() has already done the appropriate VEXEC check, therefore
we must not re-check in VOP_CACHEDLOOKUP.
This fixes O_SEARCH semantics on tmpfs and removes a redundant descent into
VOP_ACCESS() in the common case.
Reported-by: arichardson (via CheriBSD Jenkins CI)
Reviewed-by: kib
MFC-after: 3 days
Differential Revision: https://reviews.freebsd.org/D28401
The current uname is branch-cXXXX-gHASH
Three changes to make uname more useful.
1. Move from using git rev-list --count to git rev-lis --count --first-parent
since that gives a better, incrementing number.
2. Report this count as 'nXXXXX' rather than 'cXXXXX' because c is part of
a hash and we've changed the sematnics of XXXXX
3. Remove g to make HASH cut and pastable.
Durting review, #1 & #3 had the largest consensus. There was a diversity of
opinion on #2, but on the whole it was positive so I'll acknowledge the dissent,
but move forward with something seems to have support since the dissent was all
about what letter to use where I chose 'n'.
MFC After: 3 days
Reviewed by: rgrimes, emaste (earlier version)
Differential Revision: https://reviews.freebsd.org/D28338
newer controller have a sparce bus space that can be figured
out by probing the HW. This gives the starting bus number.
When reading the PCI config. space behind the VMD controller,
the offset of the starting bus needs to be subtracted from
the bus being read.
Fixed a bug in which in which not all of the devices
directly attached to the VMD controller would be probed.
On my initial test HW, a switch was found at bus 0, slot 0
and function 0. All of the NVME drives were behind that
switch. Now scan for all slots and functions attached to
bus 0. If a something was found then run attach after the
scan. On detach also go through all slots and functions
on bus 0.
Tested with device ID's: 0x201d & 0x9a0b
Tested by: nc@
MFC after: 7 days
PR: 252253
Use hsctrl_load to load the module at boot time.
Submitted by: Shunchao Hu <ankohuu_outlook.com>
Reviewed by: wulf
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D28343
This is required to make use of KERN_TLS
Reviewed by: jhb
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D28405
Move software iSCSI tunables/sysctls into kern.icl.soft subtree.
Replace several hardcoded length constants there with variables.
While there, stretch the limits to better match Linux' open-iscsi
and our own initiator with new MAXPHYS of 1MB. Our CTL target is
also optimized for up to 1MB I/Os, so there is also a match now.
For Windows 10 and VMware 6.7 initiators at default settings it
should make no change, since previous limits were sufficient there.
Tests of QD1 1MB writes from FreeBSD over 10GigE link show throughput
increase by 29% on idle connection and 132% with concurrent QD8 reads.
MFC after: 3 days
Sponsored by: iXsystems, Inc.
It is possible for a buf to be reassigned between the dirty and clean
lists while gbincore_unlocked() looks in each list. Avoid creating
a buffer in that case and fallback to a locked lookup.
This fixes a regression from r363482.
More discussion on potential improvements to the clean and dirty lists
handling is in the review.
Reviewed by: cem, kib, markj, vangyzen, rlibby
Reported by: Suraj.Raju at dell.com
Submitted by: Suraj.Raju at dell.com, cem, [based on both]
MFC after: 2 weeks
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D28375
This merges upstream patches from OpenSSL's master branch to add
KTLS infrastructure for TLS 1.0-1.3 including both RX and TX
offload and SSL_sendfile support on both Linux and FreeBSD.
Note that TLS 1.3 only supports TX offload.
A new WITH/WITHOUT_OPENSSL_KTLS determines if OpenSSL is built with
KTLS support. It defaults to enabled on amd64 and disabled on all
other architectures.
Reviewed by: jkim (earlier version)
Approved by: secteam
Obtained from: OpenSSL (patches from master)
MFC after: 1 week
Relnotes: yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D28273
The file already includes sys/param.h and should use that definition.
I found this while testing D28332.
Reviewed By: bapt
Differential Revision: https://reviews.freebsd.org/D28331
This changes the behaviour to a 30s total timeout (needed when running
on slow emulated uniprocessor systems) and timing out after 10s without
any input. This also uses timespecsub() instead of ignoring the
nanoseconds field.
After this change the tests runs more reliably on QEMU and time out less
frequently.
Reviewed By: asomers
Differential Revision: https://reviews.freebsd.org/D28391
SVN r343917 fixed this for in-tree clang, but when building with a newer
out-of-tree clang the test was still marked as XFAIL.
Reviewed By: dim
Differential Revision: https://reviews.freebsd.org/D28390
auditd creates a pidfile so we should use it for status checks.
This also seems to speed up the frequent onestatus checks used in
tests/sys/audit.
Reviewed By: asomers
Differential Revision: https://reviews.freebsd.org/D28389
tree that fix the ratelimit code. There were several bugs
in tcp_ratelimit itself and we needed further work to support
the multiple tag format coming for the joint TLS and Ratelimit dances.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D28357
This code implements a version of the devres framework found
working for various iwlwifi use cases and also providing functions
for ttm_page_alloc_dma.c from DRM.
Part of the framework replicates the consumed KPI, while others
are internal helper functions.
In addition the simple devm_k*malloc() consumers were implemented
and kvasprintf() was enhanced to also work for the devm_kasprintf()
case.
Addmittingly lkpi_devm_kmalloc_release() could be avoided but for
the overall understanding of the code and possible memory tracing
it may still be helpful.
Further devsres consumer are implemented for iwlwifi but will follow
later as the main reason for this change is to sort out overlap with
DRM.
Sponsored-by: The FreeBSD Foundation
Obtained-from: bz_iwlwifi
MFC After: 3 days
Reviewed-by: hselasky, manu
Differential Revision: https://reviews.freebsd.org/D28189
In pci_domain_nr() directly return the domain which got set in
lkpifill_pci_dev() in all cases. This was missed between D27550
and 105a37cac7 .
In order to implement pci_dev_put() harmonize further code
(which was started in the aforementioned commit) and add kobj
related bits (through the now common lkpifill_pci_dev() code)
to the DRM specific calls without adding the DRM allocated
pci devices to the pci_devices list.
Add a release for the lkpinew_pci_dev() (DRM) case so freeing
will work.
This allows the DRM created devices to use the normal kobj/refcount
logic and work with, e.g., pci_dev_put().
(For a slightly more detailed code walk see the review).
Sponsored-by: The FreeBSD Foundation
Obtained-from: bz_iwlwifi (partially)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D28188
The upcoming in-kernel implementations for LinuxKPI based on work on
iwlwifi (and other wireless drivers) conflicts in a few places with
the drm-kmod graphics work outside the base system.
In order to transition smoothly extract the conflicting bits.
This included "unaligned" accessor functions, sg_pcopy_from_buffer(),
IS_*() macros (to be further restricted in the future), power management
bits (possibly no longer conflicting with DRM), and other minor changes.
Obtained-from: bz_iwlwifi
Sponsored-by: The FreeBSD Foundation
MFC after: 3 days
Reviewed by: kib, hselasky, manu, bdragon (looked at earlier versions)
Differential Revision: https://reviews.freebsd.org/D26598
Implement linux firmware KPI compat code.
This includes: request_firmware() request_firmware_nowait(),
request_firmware_direct(), firmware_request_nowarn(),
and release_firmware().
Given we will try to map requested names from natively ported
or full-linuxkpi-using drivers to a firmware(9) auto-loading
name format (.ko file name and image name matching),
we quieten firmware(9) and print success or failure (unless
the _nowarn() version was called) in the linuxkpi implementation.
At the moment we try up-to 4 different naming combinations,
with path stripped, original name, and requested name with '/'
or '.' replaced.
We do not currently defer loading in the "nowait" case.
Sponsored-by: The FreeBSD Foundation
Sponsored-by: Rubicon Communications, LLC ("Netgate")
(firmware(9) nowarn update from D27413)
MFC after: 3 days
Reviewed by: kib, manu (looked at older versions)
Differential Revision: https://reviews.freebsd.org/D27414
This is a regression issue after the new UAR API was introduced
by f8f5b459d2 .
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
This is all code only run on ARMv4 and ARMv5. Support for these have
been dropped from FreeBSD.
Differential Revision: https://reviews.freebsd.org/D28314
This was only used when building for ARMv4 or some ARMv5 or when
_STANDALONE is defined. As ARMv4 and ARMv5 support has been removed,
and we only define _STANDALONE in the bootloader where we don't use
this version of memcpy we can remove it.
Differential Revision: https://reviews.freebsd.org/D28313
While loading kernel, we check if vt/vbe backend support is included in
kernel and set the tg_kernel_supported flag in gfx_state. unload
command needs to reset this flag to allow next load to perform
this check with new kernel.
Reported by: jhb
Make the installer more useful, by allowing it to create a bootable
installation. Also, enable the menu option for ZFS-on-root.
Like arm64, RISC-V boots by UEFI only, so arm64's partedit
implementation is renamed and shared among the two platforms.
Reviewed by: gjb
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D28180
If the installer is creating a new ESP, then this directory will not
exist and the subsequent cp will fail silently. This is usually of no
consequence if /efi/freebsd/loader.efi is set up correctly.
Reviewed by: imp
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D28176
The System Reset extension provides functions to shutdown or reboot the
system via SBI firmware. This newly defined extension supersedes the
functionality of the legacy shutdown extension.
Update the SBI code to use the new System Reset extension when
available, and fall back to the legacy one.
Reviewed By: kp, jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D28226
On i386, after 6c7a932d0b, the vbefb vt
driver was no longer detected by the loader, if any kernel module was
loaded after the kernel itself.
This was caused by the parse_vt_drv_set() function being called multiple
times, resetting the detection flag. (It was called multiple times,
becuase i386 .ko files are shared objects like the kernel proper, while
this is not the case on amd64.)
Fix this by skipping the set_vt_drv_set lookup if vbefb was already
detected.
Reviewed by: tsoome
- Document a constraint on the AAD size for AES-GCM.
- Note that the list of supported platforms and add-on devices is not
complete and indicate that QAT devices will show up in pciconf
output. [1]
PR: 252984 [1]
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC ("Netgate")
