The names of m-d variants are now added (manually) to MDSRCS instead
of to SRCS, and the names of all machine-independent (m-i) variants
that can reasonably be replaced by an m-d variant are now added
(manually) to MISRCS instead of to SRCS, so that a simple substitution
can be used to discard the unused m-i variants. MISRCS is potentially
all m-i sources, but the substitution is too simple to be fast, so
MISRCS should be kept reasonably small.
libc/Makefile.inc:
Do the substitution.
libc/i386/string/Makefile.inc:
Add to MDSRCS instead of to SRCS. Add the names of all sources in this
directory, but no others.
libc/string/Makefile.inc
Add to MISRCS instead of to SRCS. Add the names of all sources in this
directory. Don't use (broken) explicit rules for special cases.
1. Add new file "sys/kern/vfs_default.c" where default actions for
VOPs go. Implement proper defaults for ABORTOP, BWRITE, LEASE,
POLL, REVOKE and STRATEGY. Various stuff spread over the entire
tree belongs here.
2. Change VOP_BLKATOFF to a normal function in cd9660.
3. Kill VOP_BLKATOFF, VOP_TRUNCATE, VOP_VFREE, VOP_VALLOC. These
are private interface functions between UFS and the underlying
storage manager layer (FFS/LFS/MFS/EXT2FS). The functions now
live in struct ufsmount instead.
4. Remove a kludge of VOP_ functions in all filesystems, that did
nothing but obscure the simplicity and break the expandability.
If a filesystem doesn't implement VOP_FOO, it shouldn't have an
entry for it in its vnops table. The system will try to DTRT
if it is not implemented. There are still some cruft left, but
the bulk of it is done.
5. Fix another VCALL in vfs_cache.c (thanks Bruce!)
2/ Show the dummy mount in the mount list. it cannot be reached (that I know of)
but puting it there, means that disks mounted from devfs will have their things such as the superblock and the bitmaps, synced to disk :)
for the entire time that it was there, so obviously nothing needs it
anymore.
Note, unix98/single-unix spec v2 says that usleep() returns an int rather
than a void, to indicate whether the entire time period elapsed (0) or an
error (eg: signal handler) interrupted it (returns -1, errno = EINTR)
It is probably useful to make this change but I'll test it locally first
to see if this will break userland programs [much]...
Reviewed by: ache, bde
back to the original single nanosleep() implementation. This is POSIX and
Unix98 (aka single-unix spec v2) compliant behavior. If a program sets
alarm(2) or an interval timer (setitimer(2)) without a SIGALRM handler
being active, sleep(3) will no longer absorb it, and the program will get
what it asked for..... :-]
The original reason for this in the first place (apache) doesn't seem to
need it anymore, according to Andrey.
Reviewed by: ache, bde
at moment of delivery. Restoring the signal mask after the tsleep()
is next to useless since the signal is still queued.. This was interacting
with usleep(3) on receipt of a SIGALRM causing it to near busy loop.
Now, we set the new signal mask "permanently" for signanosleep().
Problem noted by: bde
1. Use the default function to access all the specfs operations.
2. Use the default function to access all the fifofs operations.
3. Use the default function to access all the ufs operations.
4. Fix VCALL usage in vfs_cache.c
5. Use VOCALL to access specfs functions in devfs_vnops.c
6. Staticize most of the spec and fifofs vnops functions.
7. Make UFS panic if it lacks bits of the underlying storage handling.
Properlay clean the global RM variable if cgetstr() failed for it.
Otherwise, a connection attempt to a remote machine was made (and a
bogus result code printed) if a local printer followed a remote one in
printcap, and you did a `lpq -a', since checkremote() falsely assumed
the printer to be a remote one.
While i was at it, removed a gratuituous newline printed in front of
the remote machine's name, thus making the output more consistent (and
better machine-parseable) now.
1. Remove comment stating the blatantly obvious.
2. Align in two columns.
3. Sort all but the default element alphabetically.
4. Remove XXX comments pointing out entries not needed.
ip->i_flags.
Rev.1.18 completely broke ufs. My root directory went away about 10
seconds after booting. I think file system damage was null, since
IN_HASHED = 0x80 is not used in the disk flags (it would probably
be UF_SOMETHING if it were used).
Without this, in -auto mode, we stay in ST_STOPPING
and never check our dial filters to see if it's time
to bring the line up again.
This may make "set stopped" redundant.
made to the RPC code some months ago. The value of __svc_fdsetsize is being
calculated incorrectly.
Logically, one would assume that __svc_fdsetsize is being used as a
substitute for FD_SETSIZE, with the difference being that __svc_fdsetsize
can be expanded on the fly to accomodate more descriptors if need be.
There are two problems: first, __svc_fdsetsize is not initialized to 0.
Second, __svc_fdsetsize is being calculated in svc.c:xprt_registere() as:
__svc_fdsetsize = howmany(sock+1, NFDBITS);
This is wrong. If we are adding a socket with index value 4 to the
descriptor set, then __svc_fdsetsize will be 1 (since fds_bits is
an unsigned long, it can support any descriptor from 0 to 31, so we
only need one of them). In order for this to make sense with the
rest of the code though, it should be:
__svc_fdsetsize = howmany(sock+1, NFDBITS) * NFDBITS;
Now if sock == 4, __svc_fdsetsize will be 32.
This bug causes 2 errors to occur. First, in xprt_register(), it
causes the __svc_fdset descriptor array to be freed and reallocated
unnecessarily. The code checks if it needs to expand the array using
the test: if (sock + 1 > __svc_fdsetsize). The very first time through,
__svc_fdsetsize is 0, which is fine: an array has to be allocated the
first time out. However __svc_fdsetsize is incorrectly set to 1, so
on the second time through, the test (sock + 1 > __svc_fdsetsize)
will still succeed, and the __svc_fdset array will be destroyed and
reallocated for no reason.
Second, the code in svc_run.c:svc_run() can become hopelessly confused.
The svc_run() routine malloc()s its own fd_set array using the value
of __svc_fdsetsize to decide how much memory to allocate. Once the
xprt_register() function expands the __svc_fdset array the first time,
the value for __svc_fdsetsize becomes 2, which is too small: the resulting
calculation causes the code to allocate an array that's only 32 bits wide
when it actually needs 64 bits. It also uses the valuse of __svc_fdsetsize
when copying the contents of the __svc_fdset array into the new array.
The end result is that all but the first 32 file descriptors get lost.
Note: from what I can tell, this bug originated in OpenBSD and was
brought over to us when the code was merged. The bug is still there
in the OpenBSD source.
Total nervous breakdown averted by: Electric Fence 2.0.5
connection timeout controllable by a new printcap(5) capability named
`ct' (connectiom timeout), defaulting to 120 seconds (which is the
default TCP connection timeout).
Would anybody see a problem with merging all this into RELENG_2_2?
